ODBC connection to the database MsAccess Ora11.2 64-bit

Similar Questions

• Problems connecting to the database msaccess 32 bit on 64 bit 11G

  Here's the question:

  I have a database to 9i (32-bit windows) with a connection hsodbc to an old one to an Access database so once the schema can see and copy data from an access database has said, everything works fine.

  I'm about to move the 64 bit 11.2.0.3 on windows 2008 server 64-bit database, database is migrated and tested ok.

  The problem comes from the connection dg4odbc, I created the AS400 database connections and they are ok, but I set up an ODBC for the access database, using the 32-bit ODBC interface as MS recommends, but I always get this error message:

  ERROR on line 1:

  ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:

  [Microsoft] [ODBC driver manager] The specified DSN contains an architecture

  incompatibility between the driver and the Application {IM014}

  ORA-02063: preceding 2 lines of RADERDB

  According to MS technet, it is do not use the c:\Windows\SysWOW64\odbcad32.exe to set up the ODBC connection, but I used only executable, when I use the ordinary 64-bit ODBC admin I can't even see msaccess drivers first.

  The funny thing is, when I point the tnsnames.ora on the old server 9i entry, it uses the ODBC connection and then the dblink 11G and then works fine. However, it is a band-aid solution and I want to get everything works from the new production database server.

  Any suggestions?

  Thanks in advance...

  The message means you are using a 32-bit with a 64-bit program ODBC driver. It does not work. If you want to connect with the 64-bit DG4ODBC, you must use a 64-bit ODBC driver. A package is available on the Microsoft Technet site (AccessDatabaseEngine_x64 - http://www.microsoft.com/en-gb/download/details.aspx?id=13255 ) that ships the drivers ODBC 64-bit for their Excel/Access programs.

  Please note that product installation gateway 32-bit on Windows 64-bit is NOT supported.

  -Klaus

• How to connect to the database

  Hi all

  I use labsql (and quite new to him m) and the server Mysql 5.1.I wanted to know how to connect to the database without changing the name of the dsn from the tools administrative/ODBC 5.1 driver manually. I want to install exe in several PC and it would be a great help if I could make the connection directly but my Vi.

  I went through several forums and came to know that 'Provider = ProviderName; Data Source = DatabaseSource; Initial Catalog = DatabaseName; User = username ID; Password = password', should solve the problem. But where in my case I m still confused. The connection string above does not sit well with me.

  Can someone help me please.

  Have a look here, where I have such a picture to show how to form a string constant to connect to the database. Some subsequent posts in this thread should also be useful.

  Good luck!

  Ian

• Administration client OBIEE 11 g tool - cannot connect to the database.

  Hello

  I installed OBIEE 11 g on linux platform and installed 11g admin client tool in windows server.

  My database is installed on another server (not in the installed tool of client machine). I created the ODBC DSN in the windows machine. But when I create the new repository and when I give the credentials for the database to connect I get connection failed.

  I don't have any customer database oracle installed on the windows machine. Is there something to configure on windows server?

  Any help and guidance would be much appreciated.

  Thank you

  MK.

  I installed the client 11g and one more thing that missed me is the setting of the variable of environment path in windows machine. Whenever I tried to connect to the database through the RPD, it seeks the oracore11.dll file. I mentioned the location of the oracore11.dll file in the path variable, and everything worked fine for me

  Kind regards

  MK

• VAIO Messenger-unable to connect to the database

  I had this problem for months. When I connect to the internet... about 10-15 minutes later... a box opens "Vaio Messenger unable to connect to the database." I'd like to just turn off Vaio Messenger. I looked up how to disable Messenger but he always States go to the settings dialog box. For the life of me I can't find a dialog box. How can I disable Messenger? How do I repair Messenger so it CAN connect to the database? Help!

  I had this problem for months. I can't change the dialog box. I can't uninstall vaio Messenger. I have so much pain to find this site, if you have a cure please write me [email protected]

• Test the connection to the database failed: connection to the server could not

  I have one of my servers HPOV NNMi 9.23 restarted this morning and NNMi is loading is no longer.  I see the following errors in the newspapers said:

  /var/opt/OV/log/NNM/public/nmsdbmgr.log

  06/04/2015-09:28:05 connection to the database test failed: connection to the server could not: connection refused
  The server running on host "127.0.0.1" and accept
  TCP/IP connections on port 5432?

  /var/opt/OV/log/NNM/public/postgres.log

  2015-04-06 09:25:55.312 EDT: 8580:0LOG: could not translate the hostname "localhost", "5432" service at the address: name or service not known not

  2015-04-06 09:25:55.312 EDT: 8580:0WARNING: could not create listen to "localhost".

  2015-04-06 09:25:55.312 EDT: 8580:0FATAL: could not create TCP/IP sockets

  I have checked/etc/hosts and found the following entry:

  #; Local
  #;
  127.0.0.1 localhost

  The command line, I can ping localhost without problem.  Not sure why NNMi begins not at this point.

  Turns out be the permissions on the file/etc/hosts.

• RCU error: unable to connect to the database using the contact information provided

  Hello

  I am not able to connect to the database using the remote control 11.1.1.10.1 to create patterns. I ran the UCR even a week ago and I managed to connect. My database and listener are up and running and the host and the credentials are correct. I don't know where is the problem. Any help will be appreciated. Attaching the screenshot for reference.

  

  Concerning

  Oumaima

  Hi Handal

  Thanks for the reply. Looks like someone had blocked the firewall settings, so I was unable to connect to the database using the port.

  Thank you

  Oumaima

• How to connect to the database without sqlclient soa

  Hi all

  I have a very simple question.

  I need to write a shell script to get some stats for bpel instances of database as part of the daily health check.

  The problem is in our area of unix server, any customer database is not installed.

  Sql client is present as part of the installation of SOA that we can use to create the connection to the database? or by any mode of access to the shell database.

  Thanks in advance,

  Bob

  Hi Bob, there.

  most of the components in the FMW stack including SOA infrastructure rely on pure JDBC to talk to RDBMS and as I know there is no client Oracle installed in slot the FMW home (after installing SOA Suite).

  One possibility would be to use the Oracle Instant Client and use its tools from your shell scripts. It's a bit unzip and run Setup.

  HTH,

  A.

• Unable to connect to the database. adbldxml.pl

  I've updated 11.1.0.7 12.1.0.2 database database with a 12.1.3 apps

  I produced the apps appsutip.zip and copied to the 12.1.0 oracle home

  but when I run perl adbldxml.pl in appsutil/bin and answering questions that I can't connect to the database

  Hello

  When I run the listener his race of my former oracle home how change that

  You must stop the listener of the old House and new start home. You may need to copy all the files from the old House to the new house network and change the oracle home location in all the files manually (or) you can configure the new listener of 12 at home.

  To get an idea please see my blogpost:

  http://appsdbaworkshop.blogspot.com/2012/03/Oracle-11gr2-database-upgrade-in-apps.html

  Kind regards

  A H E E R X

• Impdp not connect to the database without error returns

  Kind regards.

  Please ask your usual support, motivated, that I am facing a strange problem.

  I recently did an expdp of different actions, the database on which the export is carried out version 10.2.0.4 Now, I'm doing impdp on a database whose version is 10.2.0.5.

  The Datapump not return any errors, does not seem to connect to the database, the impdp log shows:

  ;;;

  Import: Version 10.2.0.5.0 - 64 bit Production on Friday, August 7, 2015 11:13:43

  Copyright (c) 2003, 2007, Oracle.  All rights reserved.

  ;;;

  Connected to: Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production

  With the partitioning, Data Mining and Real Application Testing options

  I wonder if this is a bug or compatibility of version of the problem.

  Thanks in advance.

  Best regards.

  The first thing I see is that you specify on the impdp command expdp.par.  This can work, but don't forget, there are expdp parameters that do not work in impdp. This should give an error, but not knowing what is in the file, it is difficult to see what might happen.

  You can add trace = ff0b00 and then watch to see is it y * dw*.trc files were created.  If not, then it is failing in the treatment of your settings and you want to in the last * dm*.trc file can help out you.

  Dean

• Unable to connect to the database GGSCI

  Hi experts,

  Currently, I am trying to configure an installation of goldengate and have a problem with the connection to the database through GGSCI.

  In SQLPLUS and sql developer, I can connect to the database, but thanks to GGSCI is impossible to connect to the database.

  I am trying to connect this name ggate@service, I get an error ORA-12504. I am unable to connect using this method.

  ggate@ggsrc password username dblogin *.
  ERROR: Could not connect to the database using the user ggate@ggsrc. Please check privileges.
  ORA-12504: TNS:listener did not have the SERVICE_NAME in CONNECT_DATA.

  granted DBA privilege user GGATE but still cannot connect to the database, can any one help on this subject, it is very useful.

  Thanks in advance.

  AT

  Hi thanks,

  After the set up TNS_ADMIN environment its works very well

  Thank you

• CFGFWK-60850: the Test failed! CFGFWK-60853: A connection to the database, but no lines have been returned to the examination of the SQL query.

  Hi all..

  It's SOA 11.1.1.7... I created the schema and storage via RCU but when I try to configure JDBS schema components... his throw this error:

  CFGFWK-60850: the Test failed!

  CFGFWK-60853: A connection to the database, but no lines have been returned to the examination of the SQL query.

  I created 3 users of UCR and who were all successful, because I have no error... of these three alone is managed in the configuration tree SOA...

  No idea why like that...

  Thank you

  Aerts

  This that I solved it by installing EMP 11.1.2.2 with UCR and SOA 11.1.1.6...

• Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

  Hello.

  Hello

  Do you have any idea of this error, I went through a few forums, but I still got the same message.

  FDM is my server on computer A

  and my Foundation + shared on machine B

  
  

  Error: Unable to connect to the database.  Please check the databases and verify the database is accessible.

  Hello

  Browse the following post

  Failed to create the application of FDM

  (mark this message as useful or appropriate if that helps!)

  concerning

  -DM

• connection to the database

  Hi al l,.

  This is the first time I use sql developer, I downloaded the version Version 4.0.2.15 build 15.21, downloaded the jdk.

  and it works fine, but I can't connect to the database,

  -We have the database (exsys11) installed on a server,

  -J' installed sql developer on my client.

  -J' copied 'tnsnames.ora' and 'sqlnet' in the folder of sql developer,.

  but he can't see the databases.

  I am logged in using a user name and a password and a connection 'tns' and role type = default.

  but he can't see my databases?

  Thank you

  Tools > Preferences > database > advanced

  In the last piece, directory Tnsnames, put in your sqldev folder where you copied the tnsnames file.

  That's assuming that change your ' basic' connection type 'TNS' and access to 'Network Alias' dropdown list control is not already show you your tns entries.

• Hide the username / password when connecting to the database

  I need to find a way to hide the user name / password when connecting to the database (via a script), or by encryption or any other method that hides this information when I connect to the database.

  I use Oracle 11 g.

  I tried with the portfolio method, but could not connect to the database of the error below, even the user name and password:

  ERROR:

  ORA-01017: invalid username / password; connection refused

  I plugged this way (after the cover configuration):

  sqlplus /@DB

  Please help me.

  Concerning

  Luiza

  Hi Luiza,

  Try to find out why the portfolio method does not work, check the implementation using ref 340559.1 Note

  Check also for example client and server versions / compatibility, evolves sec_case_sensitive_logon relevant parameter (as a test, because it must be true) etc.

  Greetings,

  Damage ten Monkshood