ODI - Reverse Engineering of a txt file

Similar Questions

• ODI - reverse the data of the file store?

  Hi gurus,
  
  I'll put up the ODI for plainning application
  
  I have installation topology and have creatred models.
  
  Our requirement is to load the Member of Dimension Plannig of flat files.
  
  So I have to the templates in the designer of... One for the flat file... one for planning.
  
  I did the opposite of the planing model succesfull, and she filled with all dimensions.
  
  Now, I want to do the opposite for the file also.
  
  But when I'm walking back on the model of file it says... cannot reverse the file template, go to the columns in the data source tab and then do the opposite.
  
  I created a server manulayy Say for accounts Dimension data, went on the colum tab, then did the revere, he succeeded.
  
  But the problem is that the columns are like c1, c2, c3... so on.
  
  They do not have to come from the way the data store was filled when I reverence for data store planning.
  
  If anyone can suggest me a good way to make this event for that datasource is properly filled with the correcct names,
  
  
  Also is there a way to fill (reverse) model of file data source... for all files (say 15) and not individulally one by one.
  
  
  Suggestions would be much appreciated
  
  Thanks in advance

  If your file as header records make it sure in the files tab set heading 1 then when you reverse the columns that it must pick up the column headings

  Reversal of several files you can watch http://odiexperts.com/rkm-file-jython/

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Reverse Engineering - BlackBerry extract cod files java files

  I want to know if we can extract the files .java Blackberry since the .cod files? Is this possible?

  In the affirmative. How and what are the steps?

  And if not? Why? Because that would mean the violation of the security of the device blackberry app?

  I can't give a definitive answer to this.
  It is / was a decompiler of cod, but I don't know anyone who used it successfully to decompile a complex program.
  I gave a few hours test and never managed.

  even if you would be able to decompile a program, you would be a good step away from stealing stuff, but if you are concerned you can use of darkening additional layers or whatever.

  personally, I doubt that everyone would gain something by using the approach of decompilation and my experience shows that some decompiler exists does not work properly.

• Reading data from txt file and move the engine for the data

  At this point, I had the table and I already read txt file and I want to read the data in table and separate the corresponding element in 3 parts (3 axes: X, Y, Z) and I was able to make the transmission of data to move the motor in this position. and the treatment will be repeated after completing the first point

  Hey, the Index Array function may be what you are looking for. Here is the link to the documentation for this function.

  Function table index

  https://zone.NI.com/reference/en-XX/help/371361L-01/Glang/index_array/

• Problems of reverse engineering HFM

  Hello
  
  When I was trying to reverse engineering of metadata from HFM, I got this kind of error.
  com.hyperion.odi.common.ODIHAppException: error occurred in the driver when connecting to the application of financial management [demoapp] on [local] using the [admin] username.
  
  I did all the steps mentioned in this thread...
  Problems with connecting ODI to Hyperion Financial Management
  
  -Add the drivers for installation / var PATH environment
  -Check HFMdriver.dll exist in this folder
  -Install HFMClient on ODIServer
  -Check that the HFMClient can connect to HFMServer
  
  Is there any step I missing?
  Thank you

  When reversing to a 11.1.1.3.00 HFM application in ODI 10.1.3.5.0 the following error:

  org.apache.bsf.BSFException: exception of Jython:
  Traceback (innermost last):
  File "", line 38, in it?
  com.hyperion.odi.common.ODIHAppException: error occurred in the driver when connecting to the application of financial management [xxxxxxxx] on [xxxxxxxx] using the [xxxxxxxx] username.

  Cause
  The cause is that the HFMDriver.dll provided with ODI 10.1.3.5.0 is not compatible with HFM 11.1.1.3.00.
  Solution
  Apply Patch 878589210.1.3.5.2.01 ODI.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Engine.ReleaseSequenceFileEx (): modified sequence file handle is not released

  Hello

  Hello all

  I am facing a problem of leaking memory, basically, motor TestStand cache is not cleared. I have a file of main sequence calling a .NET dll. The dll has functions to remove the steps in the sequence "DestinationSequence" in "TXTModify.seq" and insert a new step in the same sequence after that. The operation is performed without flaw and I see that my "Modify.seq" TXT"file has been changed.

  After the transactions are made I am free the "TXTModify.seq" movie file handle by calling Engine.ReleaseSequenceFileEx () on the file of the modified sequence. But as soon as I close my TestStand sequence editor I get WARNING Debug (debug warning screenshot is attached). This waring should not seem like I already deleted my file handle of sequence of the TS engine cache by calling Engine.ReleaseSequenceFileEx ().

  Please help me get rid of this warning. Your generous help or suggestion will be appreciated.

  Thanks in advance.

  Concerning

  VDC

  PS: C# .NET source project so all the necessary sequence file are attached. You must keep the file in the sequence to a specific location (create the folder structure)

  Location of TXTModify.seq: \Source_Code\MemoryLeak_SupportFiles\TXTModify.seq d:\Core_ATE_application\Test_Executive_domain (TED)

  Location of HTMLModify.seq: \Source_Code\MemoryLeak_SupportFiles\HTMLModify.seq d:\Core_ATE_application\Test_Executive_domain (TED)

  VCC,

  VDC wrote:
  [...] After the sequence of closing TS editor I don't have memory leak problem, but I see that my sequence files are not changed. I'm completely subscript sequncefile has been changed. I have cross checked to see if I had the correct sequence file path, and path found was valid. [...]

  I'm enjoying what the leak memory has disappeared which is new good infact. On the other hand, I understand that your sequence is not changed. How do you check on that?

  You don't save any changes made to the file. If this is desired?

  You can check the behavior in a simple test:

  Create a new sequence file in the sequence editor, and then save it. Open (in parallel) for example, by default c#-User Interface installed with TestStand editor mode. Load the sequence file it.

  Now, it must be open in the sequence editor as well as in the user interface. In the user interface, add a new step of the action in the sequence. Please note the in the user interface, the file of the sequence is marked with a *-symbol which means there are unsaved changes. Switch to the sequence editor. You will see no change in the sequence.

  Switch to the user interface. Save the file in the sequence. The *-symbol will disappear.

  If you switch to the editor of sequence once again, you get will announce, that the movie file has been changed by an external process. You can now load changes in the sequence editor.

  Question: Is that what you see?

  hope this helps,

  Norbert

• Reverse engineering / import selected objects

  Hi all

  I'm new to tool ODI and try to understand how to reverse engineer / import the selected objects? I am unable to do this.

  For example, I have 10 tables in the database, I want to import / reverse engineer 3 of them, how do I do this at once? I'm able to do that, one by one.

  Your help is appreciated.

  Thank you

  Andy.

  Hello

  Create a template to.--> selective reverse engineering-click---> check the new store of data and object to boning. Then, you can select 3 tables of 10 tables.

  What do you mean by import here?

  You try to import 3 ODI tables?

  Thank you

• after reverse engineering, I still have the old deleted tables

  Hello
  
  I dropped a table from a database diagram and go to ODI and run reverse engineering on my model that related to the schema of the database through my logic diagram, but the deleted table is still in my model? I want this deleted table automatically removed from my model...

  ODI does not automatically remove the tables that have been deleted from the source when you do a reverse. You must remove them manually

• Include a txt file (containing e-mail addresses) as name option in 'To' to send an email to multiple recipients individually

  Thunderbird can be transformed into a mass mailing good software by having the possibility of allowing a txt file name in the field "to". The software then picks up each email address in the txt file and sends the email to each email address individually.

  Most people keep a list of emails of 100 or 200 or so who they regularly send emails in format txt, or xls. This feature will help activate as the mailer mass of people using Thunderbird and send emails to the addresses in a txt or email xls file

  Mailing software are usually about $50 and this feature will save people money.

  Concerning

  https://addons.Mozilla.org/en-us/Thunderbird/addon/mail-merge/?src=SS

  Try to use the add-on.

• How to control the rendering of the tab character in a TXT file?

  When I browse a TXT file, the tab character is rendered in order to look a lot like 8 places. Is there a way to control the apparent number of spaces in the rendering? Yes, I know that things like

                 pre { tab-size: 4 }
  

  in CSS3 could control this number in the rendering of HTML elements, but I want a control similar to a TXT file.

  Or if you want to use CSS, this bookmarklet will insert the style rule on the page:

  javascript:var r="pre{-moz-tab-size:4;}"; var s=document.createElement("style"); s.type="text/css"; s.appendChild(document.createTextNode(r)); document.body.appendChild(s); void 0;
  

  (Note that at least for now, you must prefix-moz - on the size of tabs in Firefox.)

• Impossible to get FF auto save .txt files as it does .doc files.

  When I change the action in apply for a .doc file (IE open with... or save) it works. But if I try even for a .txt file it just opens the file and custom auto save it as a doc or rtxt file. Using FF 13.0.1. Windows 7.

  If you set the pref browser.altClickSave Boolean to true on the topic: config then you can force a download if you hold down the ALT key and click on the link on the page.

  • http://KB.mozillazine.org/about:config

• How to mark several files to a list in a txt file?

  Hello world

  I want to mark more than 250 items in the Finder (i.e. label with the Orange color) whose file names I have in a txt file.

  The list of txt files looks like this:

  1_A69_2015-11 - 28_1454_C0046.mov

  1_A69_2015-11 - 28_1410_C0045.mov

  1_A69_2015-11 - 28_1408_C0044.mov

  1_A69_2015-11 - 28_1407_C0043.mov

  
  

  and so on...

  I want to Select all the files that I know exist on an external drive and an label them with a color.

  I tried to do a Boolean search in the Finder by typing ' 1_A69_2015-11 - 28_1454_C0046.mov OR 1_A69_2015-11 - 28_1410_C0045.mov OR...» "and so forth but Finder does not seem to return an accurate list (or it sometimes does not return one at all - my list seems long.)

  I understand that Automator is too primitive for this, but does not quite know Applescript, Shell script or commands in Terminal to get there.

  Help, please!

  The following script should SELECT all the files to the tag in the selected folder. Just run it from the script editor window (after replacing "username" with the appropriate name).

  game theTextFile to POSIX file ' / Users/username/Desktop/myTextFile.txt ' as alias

  Folder to pick a folder - the folder that contains the items to tag

  the value theText to read theTextFile

  list1 defined at {}

  Repeat with thisParagraph in paragraphs of theText

  the value thisParagraph to the content of thisParagraph

  If thisParagraph ends by ".mov" and then

  copy thisParagraph to the end of list1

  end if

  end Repeat

  list2 defined at {}

  Repeat with thisName in list1

  the value thisName to the content of thisName

  Try

  say application "Finder" of copy file thisName of Folder at the end of list2

  end try

  end Repeat

  say application "Finder" of selection set to list2

• How to read the Thai language in .txt file?

  AttN; Who may apply.

  How read txt file in another language (Asian language like Japanese, thai or Korea)?

  Please let me know urgent... I have to use emergency...

  Best regards

  SAE

  Hello CAs,
  Welcome to the community of Sony.

  What is the model number of the digital book reader?

  The reader supports text formats (.txt) as well as the two following formats:
  -File EPUB (.epub) EPUB (version 2.0 of PAHO) taken in charge
  -PDF file (.pdf) support is based on the PDF 1.6 specification.

  The default language on your Reader Digital Book setting does not affect the language in which the book is. Reading in a foreign language, you will have to buy them specifically in this language.

  Thank you for your message.

• Configure a mapping with txt file in LabVIEW

  Hello world

  I would like to connect my I/O with labVIEW and my .txt file (as in VeriStand) but I can't find any block or VI to do.

  Is there a trick or something like that? My txt file is approximately 300 lines...

  Thank you!

  Nico

  This VI is correct.

  Your problem is related to the names of agencies and models.

  Once you correct this (in the Homeless or TXT), it works fine.

  Check the attached file. Only the LED switches to green when each channel is added to the Homeless, if you have a single channel with the wrong name, he is unable to map all other channels.

• FTP .txt file copied correctly the cRio

  I use the 'FTP Get File.vi"to retrieve a .txt file of my CRio, which is then copied on my host.  The file is a delimited data tab.  The file copied all the data a except that the copy has a blank line between each set of data.  These additional lines take me to read the incorrect lines when the file is read in my program later with the "reading a spreadsheet file.  These additional lines come  I checked the original on the cRio file transfer via MAX and these lines do not exist.  Can someone tell me how to solve this problem?  Thank you

  If you look at the entries for the File.vi FTP Get, you will notice that there is one that says binary:

  

  By default, this is false, which means that it copies the data in an ASCII format.  Try a real constant of wiring to this entry.  It's the need for VxWorks and Windows use different end of windowing.  This difference is probably the reason that it is adding lines to it.