OEM key does not a version upgrade from vista hp

Similar Questions

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A200-10N (PSAE3): Fn key does not work after upgrade to vista any time

  After upgrading Vista-Home - Premium--> Vista Ultimate shortcut with the fn keys does not work, for example Fn + F6/7 (brightness).

  New value pack installation has not been successful.
  Moreover, after upgrading the drive to DVD from Toshiba is default, too.
  Who can help?

  I didn't try any update on my A200 but you can try to follow: install Vista using recovery media delivered. When Vista starts for the first time go in Panel and you can find Add/Remove Programs option. Remove all the stuff designed by Toshiba.

  When we remove everything, making Vista upgrade. After finishing Vista upgrade install all the stuff of Toshiba designed by order of specific facilities starting with added value package. Check please the download page if all of these tools and utilities are available.

  As far as I know all the tools and utilities are designed as universal tools and I can't imagine that there is a difference between the version of Vista ultimate or premium tools.

  DVD player is part of the image of the installations only and I can imagine that upgrade installation has changed something, but the upgrade procedure is responsible for this. I don't see any connection to Toshiba.

  As I said I don't have a CD to upgrade, but if I find one I'll try to test it on my Vista (Premium) preinstalled A200-1CR.

  Bye and I hope that you report your experiences with the Vista upgrade again.

• Satellite A200 - 170 PSAE6: the sound does not work after upgrade from Vista to XP

  Hello

  I have a little problem with my laptop Toshiba A200-170
  Modelnummer: PSAE6

  I changed my system from Windows Vista to Windows XP.

  Everything but the sound at all to install worked at best does not. The driver runs up to the end, but after the restart is installed nothing.

  Please help me!

  One question;
  Have you read the Readme.txt file that is placed in the audio driver package which can be downloaded from the Toshiba page?

  Please do!

  If you install the driver of sound for the first time follow these steps:
  Driver installation during the first:
  ---------------------------------------

  Step 1. Before installing Realtek HD Audio Drivers, press on the
  [Cancel] button if Windows detect the multimedia Audio device.

  Step 2. Insert the "Drivers from Realtek HD Audio" CD into the CD-ROM drive
  drive and run the setup.exe program to complete the installation.

  Step 3. Click on [next/OK/OK] to proceed. If the context menu of Windows
  "Digital signature not found" message, press [Yes] to continue the
  installation.

  Step 4. Finally, select to restart the system and press [finish] to complete
  installation.

  The system will reload the drivers and make some adjustments in the INF file
  file if necessary.

  Important: Please install the Microsoft KB888111 patch before installing the audio driver

• Projector does not work after upgrade from Sierra

  My projector does not work after upgrade to Sierra. Or search in Outlook (I use outlook for Mac due to having MS 365 for labour) or the search function in the finder. I use this all the time and need this feature back. I tried to reindex spotlight and nothing. Anyone has any ideas.

  Try to rebuild Spotlight rebuild the Spotlight to your Mac - Apple Support index

• Qosmio F30: Multimedia keys does not work after upgrade Vista

  I upgraded my laptop Toshiba Qosmio F30 Edition Vista Home premium that I have received from microsoft.
  After the upgrade, the multimedia keys works not (first row) and also some of the shortcuts that is done by combining the Ctrl + keys to function (such as control + F1 to turn off the screen).

  After upgrading to Vista, I've updated all my device drivers with the second software DVD received with the upgrade to Vista.
  Also once again I've updated these drivers with final Toshiba drivers for Vista dated 04/25/07 on the internet. How to restore the functions of these multimedia keys and other keyboard shortcuts that does not work.

  I ask you: where you have downloaded the drivers and software tools?
  As I upgraded my machine, I had the same problem, so a user has me look on the Toshiba site and there I found some useful drivers.

  Maybe it helps, but I can't promise you.

  http://209.167.114.38/support/download/ln_byModel.asp

  Welcome them

• HP Pavilion 2000 - 2120TU Bluetooth does not work after upgrade from Win7x32 to Win8.1x64

  Hello

  I used my laptop HP Pavilion 2000-2120TU since Apr. 13.
  Initially it was without any OS, so installed Win7x32 Pro.

  After that, I downloaded and installed the drivers from the HP site and all features were OK, including Bluetooth.

  Now I have upgraded to Win8.1x64, once again, downloaded all the drivers from the HP website and install them, but the Bluetooth is not working properly.

  I downloaded

  Qualcomm-Atheros Bluetooth 4.0 + HS Driver for Microsoft Windows 8

  Try this one and if it does not, unfortunately, I won't be able to any more help this issue because I have no idea what the problem is.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_127984_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Satellite U940 - 4000 Graphics Intel does not work after upgrade from 8.1 to win

  I've updated my Satelite U940 11 X 8.1 Windows (from 8.0) and now my Intel Graphics 4000 does not work.
  The Device Manager shows Code 43: windows has stopped this device because it has reported problems.
  I try to download a new driver from Toshiba, but this is not possible. Whenever the download stops.

  Probably for a lot of traffic on the connection

  Were you finally able to download the driver?
  I could download the package without worrying about performance too

• Satellite P205-S6257: Chicony USB Webcam does not work after upgrade to Vista Ultimate

  I've upgraded to Vista Ultimate Home and now my Webcam does not work. When I tried to update the driver, I get a message that says that Windows has encountered a problem installing the software driver for your device...

  The installation file forthis training device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  I succumbed to find the drivers on the Chicony website. My laptop is a Satellite P205-S6257 and the Toshiba is not yet display on their support site. I don't have a disk for webcam.

  Any suggestions?

  I wish more users would use the advanced search for the Toshiba forum because many topics have already been discussed here and the solution was already planned.

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  or this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24868&MessageID=91172

  In the thread above, you will find a link to this page in the solution:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  I hope I could help

• Pavilion Elite m9340f: m9340f windows version upgrade from Vista 64

  I bought the Pavilion Elite m9340f in 2008, and the computer continues to work very well with the originally installed Vista 64-bit.

  I get notifications that both IE-9 that Google-Chrome 48.0.2564.103 m are no longer in charge and not working properly with many Web sites.

  I see a lot of people on the forums of the historical problems with Windows 7, 8 and 10 updates on the m9340f.  The HP support site clearly states that the m9340f has not been tested with Windows 8, and I don't see anything about HP confirming the test he m9340f with Windows 7 or 10.

  I am very careful about the updates of Windows does not properly with the hardware configuration of m9340f.  Can someone please give me some advice on the modernization of this machine for a version of windows that will allow me to have the features Google Chrome and IE, but will not do something elese to become non-functional.

  Thanks in advance,

  dberberick

  dberberick,

  The main reason I don't like the upgrade, is that the problems you had with the previous operating system tend to make their way in the new OS. You also have the previous residual files, which can cause problems.

  (1) what would be the result?

  If you haven't experienced or unfamiliar problems with Windows Vista, the upgrade to Windows 7 should be simple and without problems during migration.

  (2) what version of Windows 7?

  Unless you need functions of class Affairs (unique encryption, join a domain, etc.), it is not really a necessity for professionals.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• access keys stopped working after the upgrade from vista to windows 7 Professional,

  keyboard shortcuts no longer works after upgrading vista to windows 7 Professional, I have a desktop hp, 64 bit, and use of wireless, my keys, i.e. hot keyboard.  have been, key, key club hp, search key email, help key, eject the dvd buttons, stop, play, etc. before keys do not work, THE VOLUME BUTTON SLEEP MODE KEY ŒUVRES WELL, Please HELP, HP AND MICROSOFT will not HELP ME, ILS ARE SAYING what CALL HP, HP SAID CALL MICROSOFT, SO No. MORE MICROSOFT or HP for ME ANYMORE ITS APPLE MAC TIMES, THANKS IN ADVANCE

  You need a version of Windows 7, the keyboard drivers for your HP computer model.  Go to Support & drivers HP to start site. Boulder computer Maven
  Most Microsoft Valuable Professional

• Satellite P200 - 10 c: camera does not work after upgrade to Vista ultimate

  After the full vista upgrade webcam did not work. After some research, I found that I had to change the driver for usb video camera I did.

  Everything works fine now except the snap button of the camera software. Record audio and video works fine. Snapshot button does not work after you have clicked on it. Can someone help me solve this problem too.

  Hello

  you have reinstalled the software of the camera (not only the drivers) that controls the special features snapshot-thing like that?

  It should contribute to reinstall everything because vista is confusing every driver/software maximally... :)
  Would appreciate comments on your success.

  See you soon

• Various services not loading after upgrade from Vista Home Premium to SP2

  I searched the forums for solutions to this problem for several days, but nothing helped. I first noticed the problem after an attempted upgrade to SP2, when the upgrade failed Mid - install and restored automatically to the previous pack service, it seems that it does not restore things to their good working condition. On the one hand, the audio service no longer works, despite attempts to start in services.msc. I am also unable to check the dependencies of this service. Second, the network in the taskbar icon indicates that the connection status is unknown, despite the fact that I can not connect and this post. Thirdly, arranging complains that it has stopped working.
  I tried several fixes, like uninstalling and reinstalling drivers, running virus scans and replacement of dll files download, but nothing has changed. I also tried the sfc/scannow command. to identify the root cause, but can not start repair services. Restore to the last know good configuration was my last attempt to win back a system that works, but this service is also blocked, complaining that the volume shadow copy service is not functional (even if I can throw in services). All previous changes have been made using administrator privileges.
  Does anyone have any suggestions before you reinstall the operating system? (ASUS laptop refurbished w/o a DVD of vista) Would be very grateful if you can provide help on this

  Thank you!

  Hello

  Create a new user account and verify. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Lifecam VX6000 does not work after upgrade to Vista

  Lifecam VX6000 does not, even if he says he's ok, installed

  Updated from XP - Pro to Vista Business, everything's fine except that I can't get my webcam Lifecam VX6000 at work

  http://www.Microsoft.com/hardware/download/download.aspx?category=ice

  You have completed the 4 menus at the above link > click on GO > Download Vista software for it.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD/CD RW drive does not work after update from Vista Premium for Vista Ultimate

  I have a gateway notbook, series P-7805u - 8400.  DVD/CD RW drive was working fine until I upgraded to Vista Ultimate.  Now, I can't even restore to a point before the update, nor that I can run my recovery disks.  I have to correct this problem.  I hate not having a phone number where I can at least speak to a technician or a place where I can scream my lungs.  I need help, real help.

  Something is terribly wrong when you spend too much for a product that doesn't work not as advertised and then you can't get the help you need when you need it.  No wonder they want to keep things civil here...

  Oh my God, bless you... it works!  After removing the filters (try manually this hotfix if the Fixit 314060 does not
  ( http://www.pchell.com/hardware/cd_drive_error_code_39.shtml) after reboot, everything is back.  THANK YOU, THANK YOU, THANK YOU.