Laptop screen disabled when connecting to a projector

Similar Questions

• screen flickers when connected to the internet

  my screen flickers when connected to yahoo on the internet.  doesn't seem to be as bad when visiting other sites such as Google.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > looking for the latest graphics drivers for Vista > download/install them

  See if the information below helps you solve the problem/s you have with Internet Explorer:

  http://support.Microsoft.com/default.aspx/KB/936213/?p=1

  "How to optimize Internet Explorer"

  Configuration in Windows Internet Explorer 7 and Windows Internet Explorer 8 settings can cause one or more of the following problems:

  ·     You experience performance issues in Internet Explorer.

  ·     You receive an error message in Internet Explorer. For example, you receive a message error "Internet Explorer cannot display the webpage".

  ·     Internet Explorer stops responding.

  This article describes how optimize or reset Internet Explorer in Windows Vista to solve these problems.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936215

  "How to solve the problems of Internet Explorer in Windows Vista and Windows XP"

  This article explains how to solve any problems that you may experience when you use Windows Internet Explorer 7 or Windows Internet Explorer 8 on a computer that is running Windows Vista.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/936214/

  "How to solve compatibility problems that affect Internet Explorer 7 in Windows Vista"

  This article describes how to troubleshoot software compatibility affecting Windows Internet Explorer 7. To help determine which program may be the cause of the problem, you can do the following:

  1 use the mode safe mode with networking

  2. perform a clean boot

  3. use another user account

  4 scan your computer against viruses and spyware

  5. run Internet Explorer 7 in "no Add-ons" mode

  Hope the above helps.

  See you soon

  Mick Murphy - Microsoft partner

• Touching laptop screen affects the connected monitor. I don't want that

  I have a monitor connected to my x230T do an extended desktop.  When I type on my laptop screen, it does not 'click' on this place, he clicks on a task on the monitor.  For example, if I tap the Start button on my laptop screen, the start menu does not open upward - instead, the left side of the bottom of the screen is clicked on.

  I want to touch on my laptop screen.  How can I fix it?

  You can setup the configuration under Systemmanagement-> Tablet-PC-configuration?

  There, you can choose which screen is the screen stylus and touchscreen.

• Computer laptop screen off when I connect it to the power adapter

  Hi all...!!

  When I connect my laptop to a power socket, adapter screen suddenly turn off and turn on again.  Same problem

  When I disconnect the AC adapter / CC from my laptop.

  I checked my laptop with another power adapter occur the same problem.

  Please help me.

  Hp 630 I3 - laptop

  OS - Windows 7 Pro

  Product no.: LV446PA

  Thank you

  Migas.

  {The content removed}

  Hello

  If your laptop has a switchable graphics then it will try to spend the record GPU power in high performance GPU when the adapter is connected. You can stop that by choosing one or the other card being the default value and remove the check mark in the box that indicates the operating system automatically switch on the battery.

  Your laptop has switchable graphics?

  If your answer is Yes, then try the following.

  Download the latest version of the AMD graphics driver software for your laptop. Uninstall the AMD graphics driver and restart the PC. Install the AMD graphics driver software. It will also install the Intel HD graphics driver. You should now be able to right-click on a place empty on the desktop and select configure switchable graphics and choose the default graphics solution that fits your needs.

• Pavilion dv6700: white screen permanently after connecting to the projector (stuck in "projector only" mode)

  Hello community,

  Here is what happened:

  I have connected my laptop to a TV via HDMI and set the display option to show the "projector only" in the Panel.

  The fn functions do not work and have never been, probably because I, at some point, off the never installed or quick launch buttons driver after the transition from Vista to Win7.

  With the TV still plugged, I closed the laptop.

  Now, when my device is restarted, the screen remains black.

  Connect to the same or other TV sets via HDMI won't show 'no signal' on the TV.

  Connection to an external display or projector via VGA will show either no signal.

  So I presume this must be the source parameter, which would need to be changed back, but I have no idea how to do that blindly. Anyone got any ideas how I could solve this problem?

  I thank very you much in advance!

  Fixed drawing of one of the two RAM Modules. Just like that.

  Hope this can help others to solve the problem.

  What has not helped:

  • Permutation of these two RAM modules and then start.
  • Reset the BIOS by pressing the keys Windows + B while pressing the power button.
  • From the BIOS menu by (several times) by pressing f8 or f10
  • Pressing on the power while pressing fn + f4 button
  • Let start normally and then by pressing Windows key + P
  • Choose different start-up options blindly with the arrow keys and enter

• Keyboard freaks out when connected to a projector

  When I connect my Lenovo T400 with Windows 7 to a projector, I am able to easily share my screen.  But my keyboard does not work.  When I press the keys on my keyboard behaves as shortcut keys.  Screens to start popping up, the menu start appearing... each key triggers the other thing that type.  Help!

  Hello

  I'm assuming that you press the Fn key and the shortcut keys are get activated when you press other keys on the keyboard.

  You can try disabing shortcut keys and check if that helps. You can consult the manual that came with your laptop or get in touch with the laptop
  Reference of the manufacturer for assistance.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Screen white when connect to TV - Equium M50

  Hi, I connect the laptop to the TV via a S-video - SCART adapter to use your TV as an external monitor. However, when I connect both, the image appears on the TV but the laptop turns off.
  Why is this? I tried to use Fn + F5 to switch the screen to the laptop, but not joy.

  Any help would be appreciated.

  What model of laptop do you have?
  What happen when you use FN + F5? You see several options, you can choose?

• SCREEN FLICKERS WHEN I PLUG THE POWER CORD A/C

  Can someone help me with this problem. My screen flickers when connected im playing games with my a/c power cord. Howerver when I remove the power cord, it works fine on battery. Also my battery almost won't charge at all with my laptop running, but when I put into hibernation or to stop it charges more quickly. Would appreciate any help as soon as POSSIBLE. Its a Dell Latitude E6400, windows 7

  Diagnosis

  The video "Refresh" is switching between 60 (on food) and 50 Hz (on battery), and the screen goes momentarily empty.

  Solution

  So what about current alternative, office > right click > properties > settings > advanced > monitor. Here, under the display settings, set the refresh rate of the screen at 50 Hertz. After you apply these settings, the flashing problem gets fixed.

• My laptop screen fades dying, a second screen plugged... but it displays as a part continues to right-hand side of the screen

  My laptop screen fades dying, connected a second monitor. I need to do (in display) do the pluged in the number one monitor.  Because it shows now it acts as an extension (on the right side of my screen.  My mouse pointer can migrate from one screen to the other and my start maing buttons that I don't see on my laptop screen.  What I really want is for the two monitors to show an identical copy of one.  Or at least put the plug in the monitor by default #1 and lapbopscreen #2 I hope that this will make sense I help eed before the screen of my laptop completely died please...

  Hi VictorReventlow,

  Try the following steps to extend the monitor on the second screen.

  1. In the settings of the display properties dialog box tab, click the icon of the monitor that represents the monitor you want to use in addition to your primary monitor.
  2. Click to select the checkbox extend my desktop on this monitor . After enabling this feature, you can drag items across your screen on alternative screens. Or, you can resize a window to stretch it on several monitors.

  For more information, see the articles below.

  How to configure and use multiple monitors in Windows XP

  http://support.Microsoft.com/kb/307873

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

• Alterations of the screen when the monitor or projector is connected to the Tecra M5

  Hello

  I do experience screen corruption when (and only when) I use my Tecra M5 connected to an external monitor or a LCD projector, through a VGA cable and via a cable DVI (and docking station). It seems fine when I use the internal LCD screen.

  He got a Nvidia Quadro NVS 110 M video card with, apparently, the most recent drivers. Alterations can be captured with a copy of Θcran, but I can't post the JPG here! They are usually green or magenta and look like rectangles, longer than high, about 2cm long and full of dashed horizontal lines.

  Sorry for the vague description - but he doesn't that sound familiar to anyone?
  Thank you

  Hello

  I can't say exactly what it could be, but I n t think that there is something wrong with the graphics card.
  I think that if the graphics card would be corrupted, therefore the fault or whatever is displayed on the internal display, but it doesn t.

  Have you changed the screen resolution? Or have you changed the color quality?

• Laptop screen will stay off when connecting to an external monitor

  I have a laptop Acer Extensa 5430 and when I connect an external monitor to the laptop screen remains. I used the Fn + F6 key to turn off the screen of the laptop but it turns shortly after that I turned it off. I searched a lot of blogs and not yet able to understand this. Any help would be appreciated. Thank you

  PROBLEM SOLVED, go to the Windows Mobility Center, then click on connect display, then check external display only.

• When I connect the HDTV office moves to the laptop screen HDMI TV.

  Original title: taskbar with HDMI output

  When I plug my TV in my HDMI output on my laptop, task bar of the window (with the start menu and open programs) always defaults to the TV screen instead of stay on the laptop screen.  Someone knows how can I change the default location for the task bar so that it stays on the screen of the laptop?  Thank you!!

  Hello
   
   
  
  The HDMI TV is defined as the main display on your computer monitor. To change the same to your laptop.
  Here's how:
  a. right-click on an empty space on the desktop and click on the screen resolution.
  b. at the top, you will see the current main screen with the Start Menu in the lower left.
  NOTE: If you are unsure which monitor who is, then click on the button to display the number on the screen to match with identity.
  c. at the top, click on the numbered display device (ex: monitor, projector or TV HDMI) you want to make your primary display to have its established border highlight.
  d. check the brand that my hand display and click OK to apply.
  NOTE: You will notice that when you check this box, the Menu start now we in this numbered display.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.

  Computer laptop screen goes black when the VGA cable is connected, but you press TV poster display correctly when the VGA button on the remote control.   I need the laptop screen too.  It started just after years of correct use.

  Original title: VGA:

  In Panel > all items in the control panel > display > screen resolution you should be able to see the two devices / displays and be able to set options...

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

• The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?

  Original title: clear the display

  Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.

  

  Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.

  You can now close the Power Options pane when you return.

• The screen of my laptop turns off when I connect HDMI cable

  I have a HP Envy and when I connected the HDMI cable to my laptop to the TV it worked for about 5 minutes. Then, all of a sudden, my laptop screen and TV all have both be empty and the TV shows "Invalid Format". My laptop freezes. Even if I unplug my laptop HDMI cable remains empty. I have to do a hard reboot it is up and running. I plug the HDMI cable and it does the same thing. My friend connected to his laptop and it worked fine. Someone please help.

  Hello Jadelcs,

  Thank you for responding to my request for further information. I suggest that reinstall us the original drivers supplied with your system. I'm you provide a document from HP support: use of the Recovery Manager to restore the software and drivers (Windows 7) as this document will guide you through the recovery process.

  I have reviewed this issue and it has resolved most of the cases the issue you described. Thanks for posting on the HP Forums. Have a great day!