Of separate paths to the closed and smaller forms

Similar Questions

• How can I add a separate apple for the iphone and ipad wife id

  How can I add a separate apple for the iphone and ipad wife id

  Hi, are the measures already implemented? If they are, you need to configure them again and establish a Apple ID at this time.

  Apple ID - Support official Apple

• ENVY of HP dv7 w / Win 8.1 freezes after the closing and re-opening of lid

  Computer: HP dv7 ENVY

  Processor: Intel Core i7-3820 QM 2.7 GHz

  OS: Windows 8.1

  Graphics Card & Driver: NVIDIA GeForce GT 650 M (worm 331.82)

  Since the passage of Win 8.0 to 8.1, my laptop does not respond to the new entry after the closing and reopening of the cover.  As an attempt to circumvent the problem, in Control Panel (Control Panel > hardware and sound > Power Options > System Settings) I selected 'doing nothing' for preferences "when I close the lid.  After having opened the lid, tab browser fail to loa, windows cannot be enabled/disabled and CTRL-ALT-DEL gives no answer (preventing access to even the Task Manager).  The computer must be restarted to continue in force.

  This solution seems to have worked, even if I do not know why the four actions that were "resolved" by the resolution of the problems of power would cause the issue.

  Thank you!

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• Find the exhibitor and small caps

  Hello

  How to find the exhibitor and small caps in indesign via javascript.

  Kind regards

  Assia

  Hi assia,.

  Try this to find Exhibitor,

  var doc = app.activeDocument;
  app.findTextPreferences = null;
  app.findTextPreferences.position = Position.SUPERSCRIPT;
  var found = doc.findText();
  app.findTextPreferences = null;
  for(var i =0;i
  for small capitals
  var doc = app.activeDocument;
  app.findTextPreferences = null;
  app.findTextPreferences.capitalization = Capitalization.SMALL_CAPS;
  var found = doc.findText();
  app.findTextPreferences = null;
  for(var i =0;i
  Kind regards
  Cognet
  		   

• Questions asked by a beginning.  CF, HTML, change of name/path of the folder and the addition of home page.

  
  Questions asked by a beginning. CF, HTML, change of name/path of the folder and the addition of home page.
  Hello, I got this new job and I'm trying to understand it as soon as possible. I'm a complete newbie to html, CF and web development
  Yes, I caught a few books, but if you can help me. I appreciate a lot is.
  
  I have this file structure
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  You will find a folder of MyReport
  And find 2 .cfm
  1 index
  2 version.cfm
  I have 2 BIG questions, ok 3
  
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.
  A home page. In other words.
  
  Homepage that contains a main report text
  Name of the division_
  
  Then a link called my reports. And your report
  Prefereably sorting
  
  · My reports.
  · Your report
  
  
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport
  
  And then tap on it
  http://myserver/ repmining\myreport
  
  
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/
  
  without repdocs.
  
  Please excuse me.
  I am a true beginner.
  
  Thank you.
  Hope someone replies soon.
  Take care.
  
  

  OK, I think I understand your questions, so here:

  Quote:
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.

  Just have a link on a page, e.g.:
  TEXT of the LINK,
  As for your question on your reports, I don't understand what you're asking

  Quote:
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport

  And then tap on it
  http://myserver/ repmining\myreport

  If you are directly connected to the server, simply create a folder (what looks like) Z:\ToExport\RepDocs\ which is the new name of Fortin, ex:
  Z:\ToExport\RepDocs\NEW_folder and put the files into it. If you are now directly connected to the server, use a program such as FTP server to connect via FTP and do the same thing.

  Quote:
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/

  It is simply because http://myserver/Myreport/ is set to point to the Z:\ToExport\RepDocs\MyReport file so it looks http://myserver is set on the Z:\ToExport\RepDocs\ folder anything you add to a folder which will be included.

  I have IE hop answered some of your questions

• The Explorer does not collapse 'Libraries' and 'User' to the closing and reopening of the records.

  This is a rather minor annoyance, but it seems every time that a user develops their folder 'User' and farm explore, Explorer will continue, opening with the folder 'User' expanded until they reduce manually.

  Part of the computer is to be efficient as possible, and when I open explore to find the folder of the user is developed, pushing "Computer" and "Drive C:" out of the box, I think it's pretty boring.

  Vista always collapsed the "User" folder, then why isn't Windows 7 do as well?

  Is it possible to disable this behavior? I already looked through Group Policy, but until now, I had no chance.

  This is a rather minor annoyance, but it seems every time that a user develops their folder 'User' and farm explore, Explorer will continue, opening with the folder 'User' expanded until they reduce manually.

  Part of the computer is to be efficient as possible, and when I open explore to find the folder of the user is developed, pushing "Computer" and "Drive C:" out of the box, I think it's pretty boring.

  Vista always collapsed the "User" folder, then why isn't Windows 7 do as well?

  Is it possible to disable this behavior? I already looked through Group Policy, but until now, I had no chance.

  I found a working answer to the Microsoft web site. A record appropriate to the real problem-solvers to the destination address.

  There is a registry key that captures the State of the State of opening and closing of the main files in the Explorer on the left Nav-component, which can be set in the left of the Explorer, Explorer closed to set the key "reg", then the value of reg key manually turned to unalterable. Now when you open occasionally these folders as Favorites or your user ID (or several program file is more problematic / parameters of the open dialog box will open your user folder), after having turned regkey unalterable, when Explorer or application of file dialog box is closed, the expanded NavPane records regkey is not re-written, staying at your preferred expanded state / collapsed.

  State information about the left NavPane of Explorer are stored in the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Modules\NavPane registry key. If you delete the value of registry ExpandedState, the next time you open the browser it will show the tree 'by default' State.

  A user also wrote a batch text file (so you can see each line of code to see what it does) to allow you to explore the value as you wish, then turn to the State of NavPane read-only to preserve the State indefinitely. The batch script also allows you to reset the features to windows default (turn the read/write registry key) and so on.

  Here is the link to the site of Microsoft with all the details and the script file:

  http://social.technet.Microsoft.com/forums/Windows/en-us/48ebc898-290D-405f-b4d5-c3dc72278b76/collapse-all-foldertrees-when-closing-Explorer

  ---------------------------------------

  As a feature add-on to what precedes, I understand this info because the comma/space syntax is different for Win7 vs. WinXP / other versions which is well documented on the web sites. This sytnax opens the Explorer to your file preferred, separate records that are expanded / collapsed with the answer provided to the direct question of this thread, but usually directly related to the objective of opening explore according to your specific needs.

  Here are the command line parameters to further open Explorer to a directory preferred in Win7 32-bit Home Premium. Create a shortcut with this command as a target line: C:\Windows\explorer.exe explore/e/root, / select "C:\". ","C:\PreferredDataDir ".

  Replace C:\PreferredDataDir with of course your favorite directory, including only a reference to the root of C:\ or a different drive letter if you prefer on a subdirectory. The specified root option still allows access to drive E: etc, unlike the desired effect added to the possibility of limiting traffic only within the specified root, which may work on other versions of Windows.

• Paths of the application and the Plugin (32 vs 64 Windows)

  I'm working on a version of our installer of plugin to put the plugin for 32-bit windows in the folder plugins Photoshop 32 bit and the 64-bit plugin in the plugins Photoshop 64-bit folder.

  Currently our only 32-bit Installer uses the Windows registry to locate plugins directory.  (HKEY_LOCAL_MACHINE/SOFTWARE/ADOBE)

  Looking here now I see that even if I chose the two 64 CS5 and CS5 - 32 when I installed Photoshop, there is always only one entry in the path of plugins.  But there are two separate files of plugins.

  Even worse Adobe seems to have changed the Organization over time.

  For CS4, both versions are in the "Program Files" directory

  For CS5 Photoshop 32-bit directory is 'program (x 86) '.

  By changing the installation program to support 32 & 64, I would like to know the best practice to find these plugin files, so I can verify their existence (since it is possible to install only 32 or 64 rather than two) and then put the plugin just in the right place.

  Now this is pretty cool:

  get plugins path of the registry

  install

  I hope I don't have to implement of the trials and errors, such as:

  start in plugins path of the registry

  go up a level and look for other files from photoshop

  go up to another level and see if there are other program files folders

  recurse in their search for Photoshop files

  If there is no better way, the absence of a second registry entry should be considered a bug?

  Adobe has not modified the Organization of the registry, Windows did.

  I also write installers for my business, so I'm quite familiar with that.

  On 64-bit Windows, the registry path you see when you get the keys in HKEY_LOCAL_MACHINE/SOFTWARE/ADOBE are 64-bit values if you call the Registry API from a 64-bit process. They are 32-bit values if you call the API to register a 32-bit process.

  So, you can either write separate 32 and 64 bit installers, or you can get acquainted intimately with registry redirection which runs on 64-bit windows. (None of this is a concern on 32 bit only for Windows systems)

  To learn more about the registry redirection, go here:

  http://msdn.Microsoft.com/en-us/library/aa384232 (v = vs. 85) .aspx

  This is a very important page for editors of the installer to read:

  http://msdn.Microsoft.com/en-us/library/aa384129 (v = vs. 85) .aspx

• The signatures and small caps in MS Word

  How can I access signatures and small caps for Adobe Garamond (or any other font opentype with these features built into the font file) using MS Office, including Word?  Signatures do not activate when checking 'conditional ligatures' and the small caps that appear when checking 'small caps' are not 'real' small capitals - they are just poor Word manufacturing.

  
  

  Thank you!

  You must use the option "Insert a symbol", select the subset of the "private use area" and insert one by one.

  It would be wonderful if MS Word provided a better user experience when you work with OpenType features, but this isn't something of that the police are in control.

  

• My bridge update 5.2.0.4 destroyed previews of all DNG files. They only appear on the side and small and I can't open Camera Raw in Bridge. Someone else has the same problem?

  I've updated Bridge yesterday. CS6 5.2.0.4. Mac OS 10.9.5

  All previews (DNG files) to the bridge now appear on the side and only small miniature size.

  Also Camera Raw has been disabled.

  I tried cache purge for folders as all purge the cache.

  I also spent over an hour on the phone with technical support that being mainly involved switched between departments and try to understand someone on the phone.

  Can anyone help?

  I'm going to guess at the root of your problem is "also Camera Raw has been disabled."

  Can you check what version of Camera Raw, or not at all? Here is how to validate: keeping up to date of Photoshop

• Sending information to the issuer and confidential form to a database

  I have an application form for an air show, can be seen here www.hollisterairshow.com/volunteerapp.php and when the user clicks on submit their information is added to a MySQL database and the user is redirected to a "thank you" page, this works very well and may be sufficient "such what." Try it if you want!

  I would try to improve it a little bit in two ways:

  1. View information of the volunteers submitted on the "thank you" page and/or
  2. Give the user the ability to send by e-mail a copy of their information on their own (it includes days they expect to be available, favorite activity etc.)

  The information that the user submits also includes personal information such as email address, phone number and mailing address and are therefore not accessible by anyone other than the issuer and administrator of aeronautics or me. I have a password protected to secure the area for the administrator to access all the info and it works fine. The primary key of the volunteer table is a "volunteernumber" which is a numeric field that is incremented by 1 automatically when recording is written in the table.

  So my concerns are:

  1. How to move the volunteernumber back to "thank you" page so that it is not visible to the user (if I used a URL parameter the user could see that they were, say, volunteers number 29 and it wouldn't take a lot of skill to change to a different number of volunteer and see someone other info)
  2. I think I read somewhere that the sending of an e-mail message can open me up to malicious attacks - not very likely, but still possible

  I would really appreciate a pointer in the right direction. I use DW CS4.

  Thank you

  Tony

  tonybabb wrote:

  -could there be a problem of formatting here or if I made another mistake?

  To use a session variable, page should start with session_start();.

• How to find the installation path of the Clipboard and jump list?

  Hello

  I'm new on this. I just want to know how I get to know this clip board and jump list are installed in my system. Any particular file related to such content or not.

  PL help me to solve this problem.

  Hi Shashank,

  Welcome to the Microsoft community.

  Please take a look at this article for more information about the list of shortcuts.

  Using lists of shortcuts to open programs and point

  You can also have a look at this thread that deals with the same subject.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/where-is-the-Clipboard/f6ee8fec-2859-E011-8dfc-68b599b31bf5

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help you.

• Correspondence of the corners between the larger and smaller rectangles rounded rectangle rounded

  In the image as an attachment, the largest rectangle rounded on top was the same as the one on the bottom corner radius. However, one on the bottom is not the same aspect and looks more stairs, even if I extended just one to create the bottom of the top. How can I match them within the radius of rounding, but have the bottom one be a larger rectangle?

  Thank you!

  

  Once the corners have been rounded, which extends shape will distort them. If you want to resize. try to select only the lower corners with the direct Selection tool and dragging them down.

• Problem with the date and update form (show 1970-01-01)

  Hi, I have an update form (php/mysql) with several date entry field. When my date is 000-00-00 I show 1970-01-01. Why?

  This is the code:

  label for = "data_chiusura" > < strong > data chiusura < facilities > < / label >

  < input type = "text" name = "Data_chiusura" value = "<?" PHP echo $string = $row_Recordset1 ["data_chiusura"];

  If ($string = ' 0000-00-00') {}

  $string = ";

  } else {}

  $string = date ("d-m-Y", strtotime ($string));

  } ; ? ">" id = "Data_chiusura" >

  Thank you

  k

  Try this-

  "id ="Data_chiusura">"

• the pencil of the closed path 17.1 - does not work for me

  Hello.

  is this working for anyone?

  Draw paths with the pencil tool

  1. Select the pencil tool.
  2. Place the tool where you want the path to start, and begin to drag to draw a path.
  3. When you started to drag, hold down Alt (Windows) or Option (Mac OS). The pencil tool displays a small circle (and, in InDesign, a solid gum) to indicate that you create a closed path.
  4. When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the closure of the road, release the Alt or Option key. You do not have to position the cursor at the starting point of the path to create a closed path; if you release the mouse button in another place, the pencil tool will close the form by creating the shortest line possible return to the starting point.

  This isn't for me. After I start drawing and I hold down the option, it's going to draw a straight line. I hold the key until after I said drawing early on.

  same thing with the railways connect two. pressing the button command does not change the behavior of the pencil tool.

  I guess there is no way to remap "smooth tool" to the new option? or moved it to a different shortcut key?

  It seems that the manual has not been updated to cover the new features.

  You must refer to the following:

  http://helpx.Adobe.com/Illustrator/using/whats-new.html