Of XC-704 & upgrade memory expansion slot

1 expansion slot

What is the specification of expansion slot for this model we would like to add a dedicated with DisplayPort graphics card?

2 memory

How many slots does memory have on the motherboard?

What type of memory is needed?

What is the maximum memory supported by the motherboard?

OK, sorry raising model in Kingston and a few other sites did not show your computer and see that I had not seen everything I was confused. Based on what I found maybe a model from other countries.

That said, it seems that it comes with 2 gigabytes of Ram DDR3L and evolutionary 8Gig

Also, it seems that yours comes with 1 PCI Express Slot x 16. I'm not sure with the power supply and that is there if you would be able to switch to a different graphics card GPU and size of the case would impose a huge limit on what might be able to adapt...

James

Tags: Acer Desktops

Similar Questions

  • Satellite U200 - where can I find the memory expansion slot?

    I want to expand the memory of my U200 but do not know where the expansion slots. Nothing in user manual help.
    Not really want to disassemble the thing if I didn't need to.
    Any ideas?

    Have you checked the manuals s user, including 157 page document?

  • M400 - how to install the memory expansion?

    It's so stupid, but I can't find how to install memory upgrade for my M400. There is nothing in the manual, and I can't find the memory expansion slot. I don't want to disassemble the tabletPC together, but it seems that the only way.

    I tried to find the manual on the web, no luck.

    Any suggestions are appreciated.

    TIA, Ben

    Hi Ben

    This device is not for me. It is probably more recent a tablet PC. Are you satisfied with it?

    Looks great in the pictures!

  • Portege 3500 - upgrade memory

    Necessary upgrade memory for a p3500. 'Expert' advised two sticks of 512 MB PC133, but on opening the rear of the location that a laptop computer and on the insertion of the new RAM it gives an error code beep. Is there than a single slot? and if so what maximum capacity and what type of RAM will it take?

    Hi Jeffrey,.

    As far as I know the 3500 Series provided with a removable module of RAM of 128 MB, 256 MB or 512 MB depending on what model and specifications you purchased. There is one other remaining slot for expansion purposes.

    The total support for the 3500 Series RAM is 2 GB and the type of RAM should be SODIMM PC133 144 pins.

    It is important that you match the RAM modules that your RAM module existing (one removable) is of the same type you new RAM module. Of course, you can always delete the original from the RAM and insert two new modules of RAM instead.

    Please check the following URL for more information on the available RAM module type.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5371&ft=m&St=3

    HTH

  • Upgrade memory for 1800-214

    Can what maximum I upgrade the memory of my 1800-214?
    Now, he uses only a meagre 128 MB on two of 64.
    Is it possible to use two 256 or can I slip a 512 MB with 64 I already have?
    Thank you vm

    Hello

    This machine has two expansion slots and internal not memory.
    These modules are supported on this laptop.
    PC100 256 MB (PA3069U - 1 M 25)
    PC100 128 MB (PA3005U)
    (PA3004U 64 MB PC100

    In this case, you can improve the memory to 512 MB of SDRAM. (2 x 256 MB)

    Best regards

  • Upgrade memory on Tecra M7

    How you actually improve the RAM on a Tecra M7. This is a new laptop and the correct memory card has already been purchased. I can't find technical info in the manual or on the website on how to do it physically.

    Concerning
    Marion

    Hello

    On most laptops the slot of memory are placed at the bottom of the unit, but it seems that the Tecra M7 slots are placed under the keyboard.

    may I ask why you are suggesting that the user manual provides no information about the upgrade memory?
    I downloaded the manual to the user on the Toshiba site and found a statement long and detailed how to upgrade and insert the modules!

    You should check out Chapter 3-> features and utilities and Options-> memory expansion

    Post again after the replacement.

    Hello and goodbye

  • Upgrade memory of 512 to 2G on a T43 gave rise to a white screen with the power upward

    I type Thinkpad T43 2687 and I added 1 GB DDR2 RAM PC2-5300 for the slot originally neath expansion slot and then I added the Mithraeum card to replace the size 512 under the keyboard.  Power to the top of the battery and AC lights came, but the screen remains blank. Then I replaced the card of underkeyboard with the original 512 memory card and nothing changed, finally I removed the second 1 GB card so I was back to the original configuration and all is back to where I started.  Everything works but no upgrade memory.

    No idea why the system does not recognize the additional memory or worse, why he stopped the whole of the system?

    Also any ideas how memory works on the upgrade I used kingston in my approach?

    Thank you

    The slot premanente RAM thus cleared, pop 1 GB under the keyboard and let us know what happens.

  • Re: Equium A60 (PSA670) - upgrading memory

    Guys,

    My brother bought an Equium A60 a few years ago and is trying to improve memory. The current configuration of the memory is as follows

    Slot 0 256 MB
    Slot 1 is empty.

    I can't seem to slot 0, but I am able to access the location 1. I plan on 512 MB or 1 dildo DDR 2700 memory in slot 1. But I do not have the specsso of the motherboard I don't know what the memory configuration is supported.

    I tried the Toshiba site, but could not find all the manuals. Anyone here know the spces are to know where I can download manuals.

    Hello

    The maximum RAM capacity is 1280MB and the 256 MB internal memory and can't be exchanged for 1 location is available for the upgrade of memory.
    This means that you can install the module 1024MB of available memory slot and you need memory PC2700 specification.

    By the way: the user manual can be downloaded from the Toshiba website, that s no problem:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download user manual

  • Upgrade memory for Equium L20-264

    Hello

    I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

    Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
    -Windows® XP Home Edition
    -60 GB hard drive
    -256 MB DDR2 RAM
    -15 "TFT color display
    -Drive DVD Super Multi (Double Layer)

    Issues related to the:

    1. How can I remove the existing memory? Is there a guide of the user on this operation?

    2 How many slots have?

    3. What is the max memory per slot?

    4. can I buy Toshiba memory directly?

    It is rather urgent and would like a quick answer.

    Thanks in advance
    Rag99

    Hi mate.

    As far as I know your laptop supports two memory locations.
    They must be placed at the bottom of the unit.
    If you n t know how to change this then I recommend consulted the user manual!
    The manual can be downloaded from the Toshiba European page.
    I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

    PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules

  • HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

    Hello

    Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

    I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

    I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

    Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

    http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

    Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

    Thanks for your time.

    Hello

    The following link shows the specifications of your computer:

    http://support.HP.com/us-en/document/c03362810

    It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

    b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

    (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

    You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

    Kind regards.

  • Satellite Pro 2100 - upgrade - upgrade memory RAM

    Hello together!

    For your information:

    Upgrade memory today to 2 Toshiba Satellite Pro 2100 (1.9 GH, 256 MB DDR - RAM initially), both up to 1 GB, all fine and no problems.

    Wanted to just end rumors "only 512 MB all together" or even less.

    If you are looking for, don't forget to think of the specifications:

    DDR-266 (PC2100)
    DDR-SDRAM, SO-DIMM
    200 PINS
    2.5 CL

    concerning the frequency of the RAM, building shape etc.

    Greetings

    L0nestar

    P.S.: Don't think that a debate is necessary, thread could be closed...

    According to the specifications of the computer laptop Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have confirmation on the RAM upgrade for this model of laptop old but still good.

    Good day.

  • Portege 4010 - upgrade memory

    I have a Portege 4010 and cannot find the expansion Bay of memory to upgrade the memory. Under my laptop's hard drive battery, dvd and what I think should be the memory, BUT it has 2 wires attached to it.

    Hello

    Memory modules are hidden under the keyboard!
    You will need to remove first a plastic cover to think above the keys F1 to F12.
    Then you should find 2 screws holding the keyboard.

    Please be careful because the keyboard is connected to the motherboard with a thin flat cable

    Then, you could see the memory modules. Gently press the two latches.
    One end of the strip of memory expansion will pop up. Enter the module memory expansion, then take it out.

    I hope this helps...

  • Upgrade memory PAVILION DV7 - 4050EV:

    Hello!! I want to improve my memory for 2 x 4 GB ram... I tried to read the manual but I'm not sure I understood that if I can update or not... any help? My lapot PAVILION dv7 - 4050ev... If finally can upgrade, you think this kit

    http://www.Newegg.com/product/product.aspx?item=N82E16820226027 & cm_re = Mushkin_2x4GB_DDR3_SODIMM-_-20...    is a good thing? any other suggestions >?

    @Prometheus1

    Yes it can.

    2 customer-accessible/expandable memory SODIMM slots

    Memory DDR3, 1 333 MHz

    Supports dual-channel support

    Supports up to 8 GB of RAM i n the following configurations

    Total of 8192 MB ● system memory (4096 MB × 2, both channels)

    Memory 6144 MB ● total system (2048 MB × 1 + 4096 MB × 1)

    Total of 4096 MB ● system memory (2048 MB x 2, dual-channel)

    Total of 3072 MB ● system memory (2048 MB × 1 + 1024Mo × 1)

    Total ● 2048 MB system memory (1024 MB x 2, dual-channel)

    2048 MB total (2048 MB × 1) ● system memory

    REO

  • Upgrade memory for my SP460

    I need to use the expansion slot in my 460 cdt but cannot find memory compatible ie pc100 ect. the number of toshiba is pa2042u but it is no longer carried by the supplier of toshiba, I contacted someone can help. Thanks keith.

    Hi Keith,

    If you search Google for the part number you should find several providers quoting available RAM modules.

    Be careful of some of the cheaper brands, they may not work properly in your laptop. I would say that a search of this forum for further discussions related to memory problems.

    HTH

  • Upgrade memory Portege S100

    Hello

    On the product page of toshiba for Toshiba Portege S100, it says that the maximum capacity of the laptop RAM is 2 GB. So I bought 2 GB of RAM for installation. However, there is only one slot available to increase the RAM (I think).

    The RAM that I got is a 256 MB module, and since my laptop has 512 MB of RAM, there must be another crack also. (After installing one of the 1 GB modules, I now 1.25 GB of RAM)

    How to install a 1 GB of RAM?
    Thank you

    Hello

    usually, if a machine has 2 expansion slots, then the other must be under the keyboard. So, if you want to install the other, try to look under the keyboard.
    But be careful: If you are not familiar with the disassembly of machines and if you have still warranty on machine to you, it would be better to give your machine a technician for the exchange of memory.

    If you can't risk a voiding your warranty if you still have it and you won´t run the risk of damaging your portege.

    Welcome them

Maybe you are looking for