Office from vista to windows 7 upgrade does not

Similar Questions

• How is the best way to improve my office from Vista to Windows 10 to 15/02/16 date?

  Original title: Conversion of Vista to win 10

  How is the best way to improve my office from Vista to Windows 10 to 15/02/16 date?

  Buy a full version of Win10 & do a clean install - assuming that you think 10 + years material will be compatible Win10.

• The x 64 Ultimate from Vista to Windows 7 upgrade. Should I buy WIndows 7 Ultimate to keep my applications?

  Same as title.

  The x 64 Ultimate from Vista to Windows 7 upgrade. Should I buy WIndows 7 Ultimate to keep my applications?

  Thanks in advance.

  Found my answer. I need Windows 7 Ultimate upgrade to keep existing applications.

• have changed from xp to windows 7, now does not work my usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  You must install the driver for Winows 7 for the camera, * if * it exists. Get it at the web site of the manufacturer of the camera.

  Also, note the following:

  You ever need connect your device directly. Buy a card reader for the type of flash card your camera uses (they are very expensive), put the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is much easier and doesn't use the camera battery. I have two cards - one readers that I keep on my desk next to my desktop computer and another that I keep in my case of laptop for use when traveling.

• HP pavilion dv4-1400cto notebook entert, I upgraded the OS from vista to win7, my bluetooth does not

  HP Pavilion dv4 - 1400 CTO entertainment notebook, I upgraded the OS from Vista to Windows 7 system, my notebooks Bluetooth is not detect and also does not, no matter what Advisor.

  Kind regards

  Hello:

  You will probably need to install the drivers and software HP Vista, which should work as well on Windows 7.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-70319-1&CC=US&DLC=en&LC=en&os=2093&Product=3945147&sw_lang=

  Paul

• After the OS from Vista to Windows 7 upgrade, lost bookmarks. Could they be somewhere in "windows.old"?

  Hello

  I upgraded my OS from Vista to Windows 7 and lost bookmarks, I had in Firefox. Back up my documents files and they are OK. Unfortunately, I don't think to back up my Firefox bookmarks.html file.

  However, I did the upgrade of the operating system from the disk and a "windows.old" folder has been created which seems to have a lot of my old files, applications, and others, but I can't find "bookmarks.html" in the firefox folder or in my user folder.

  Is there another place in windows.old where bookmarks could be, or a different file name, it may be under?

  Please help, there are a few important bookmarks that I lost and which were accumulated over several years.

  Thank you!

  Firefox has not used the file bookmarks.html for storage of bookmark since the release of Firefox 2. You need a JSON bookmark backup file or the file places.sqlite. See this:
  
  http://support.Mozilla.com/en-us/KB/recovering+important+data+from+an+old+profile

  Your old profile is located here in Windows Vista and Win7:
  
  drive: \Users\Windows login user name\AppData\Roaming\Mozilla\Firefox\Profiles\profile_name

  You may need to display 'files and hidden folders' in Win7 to be able to access the Firefox profile in windows.old files and the new installation of the OS.

• Pavllion HP dv9000 / web cam: changed O C from vista to WIN 7 cam does not appear without being on "Yahoo Messenger".

  I can not get my web cam lights up now, as I did, until I upgraded to the Tower of vista (32) to windows 7.

  Hello

  HP dv9000 Pavllion's system is not compatible with Windows 7, this is the reason that the Web cam does not work on the system, I suggest you to download the drivers for the Webcam from the link below and install it in compatibility mode and check.

  See the article mentioned below to install the drivers in compatibility mode.

  Make older programs in this windows version

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Download the Webcam utility from the link mentioned below (the software).

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1842189#N6309

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Boot Camp Windows 10 Upgrade does not work

  Hello world!

  I use Windows 7 Professional SP1 with boot camp, I managed to function very well.

  I bought a legal copy of Windows 7 Professional and active, it yesterday, so all is good and works as it should (more or less)

  I did it on my iMac 5 k (end of 2014). I use version 6 of boot camp and installed all updates in OSX as well on Windows 7 via the apple software update tool.

  Now, I decided to upgrade to Windows 10 but somehow it does not work for me as it should.

  I am able to do 10 downloaded Windows and Setup will start, but immediately after it will crash.

  I use the German version so I can only tell you what is presented here:

  "eine handcrafted befehlszeile [/DynamicUpdate] angegeben wurde.

  I don't know what the problem is, I tried 3 times more using the Microsoft upgrade page.

  I also tried the MediaCreationTool but I still get the same error at the beginning of the installation.

  What I need to install additional drivers on my USB dongle or do I have to remove my USB mouse and the USB dongle (which is always to have the files to install boot camp Windows 7 top)?

  I don't see what else to do and hope that someone here knows how to perform the upgrade properly.

  Kind regards

  ela7ion

  Update!

  The upgrade succeeded finally!

  I managed to do the upgrade after removing all devices that are connected to the iMac before.

  This includes:

  -SuperDrive

  -USB mouse

  -USB dongle

  I then started the tool to upgrade from the Microsoft Web site and guess what: it worked.

  Best regards

  ela7ion

• Windows Vista starts - Windows error message does not close properly

  Whenever I turn on my computer, I get a message that Windows did not close properly, even though I know that I went through the correct procedure when stopping down.  It started only in the last days.  I did not change my machine or installed / uninstalled something.

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• updated from XP to Windows 7 and does not connect to internet

  I'm upgrading to a computer running XP on a Windows 7 computer.  I have all the wires and cables connected and in the correct places, but now with Windows 7 computer, I get a message that I am not connected to the internet.

  I unplugged the computer Windows 7, rehooked the XP computer and everything works fine and connects to the internet.

  I wonder... I must have an ethernet cable to most recent update with Windows 7 computer newer than what I used to the old XP computer?

  Thank you!

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

• Just downloaded windows 7 Home premium 64-bit version upgrade for my computer vista laptop, windows Media Center does not have internet tv option.

  When I open windows media center, it shows only "Recorded TV" and "Live TV Setup" under the heading of TV. How can I configure internet TV for windows media center? Y at - it an upgrade or something that I can download, I went to the site of Windows Media Center and they provide all the information on the issue...

  Hello shadowboi_2009,

  Welcome to the Microsoft Answers Forum!

  Here's what you need to configure Internet TV on your computer:

  ·         Have an active Internet connection.

  ·         Complete the installation of Windows Media Center.

  ·         Wait a few minutes for an automatic download complete.

  If you do not see these items of menu in a few minutes after the installation, go to:

  "" "" Tasks"settings" general "Automatic Download Options" Download now.

  After you download updates, these menu items appear in the Windows Media Center Start menu:

  1.Guide: a TV program on the Internet and broadcast TV program lists *.
  2. Internet TV: an experience of discovery Visual to see shows, movies and videos.
  3.promotions: direct links to specific Internet TV, movies and videos.

  Here is an article that will give you more information about this:
  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Internet-TV/articles/Internet-TV-overview.aspx#access

  You can also see the article that will give you a comprehensive tutorial on the installation of the library:

  http://www.Microsoft.com/Windows/Windows-Media-Center/learn-more/Internet-TV/default.aspx

  I hope this information helps, please get back to us if you have any questions on this subject.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• the upgrade from VISTA to WINDOWS8 - BACKUP.1 does not WORK

  UNTIL I NEW COMPUTER RUNNING WINDOW8 I MADE A BACKUP OF THE USB STICK 32 OF MY FILES ON THE VISTA MACHINE.

  WHEN I TRY TO RUN PROGRAM BACKUP.1 IS BLOWS UPWARD LOOKING FOR 'MSVCP71. DLL? I LIKE THEM I'M THE ONLY ONE
  NO ONE IN THE WORLD, WHO ATTEMPTED TO RESTORE THE SAVED ON THE VISTA FILES AND YOU WANT TO COPY TO WINDOWS8?

  Hello - for those who have a computer HP Vista MS, they provide a backup system that creates an .exe file called guess what? 'backup.1.exe' and a file 'backup2.fbw '.  Try to use google next time and look it up!

  Maybe you can Google to find an answer.  When was the last time you could make a backup of an any other operating system and restore it on a newer version?  Once you get this answer let us know.
  Guess what this backup is for HP computers running Windows Vista only!  Maybe if you understand how works the backup program you wouldn't be so rough for those of us who are trying to help.  But since you've already made your decision, you can Google how to do.  Sure that no one here will help you now.  Maybe HP will... for a price.

• Downgraded from Vista to XP BUT AUDIO does NOT WORK!

  Hello ~!

  I have a HP Pavilion dv6500 laptop with an AMD processor. Recently, I got drowngraded of Windows Vista to XP by following the guide on this site, but not install the audio drivers (Conexant High Definition Audio Driver) and so I have no sound. It says "ERROR - Driver Installation Failed: could not be found for this driver MEDIA." The same for the Modem driver and the MS - SAU (I tried first by following the instructions). What should I do to fix this? =(

  You use the part 2 of the Guide Downgrade XP drivers? Did you install Conexant using Device Manager as described?

• Windows 7 upgrade fails error is "Windows Anytime Upgrade is not in this edition of Windows.

  I have a Toshiba bought in Australia with Windows 7 Home Premium. I bought a key to upgrade to Ultimate, but when I try to run Windows Anytime Upgrade (be it 'Search' or the control panel) I get a message "Windows Anytime Upgrade isn't in this edition of Windows. I can't find anything on the web that helps: each site assumes that you can run Windows Anytime Upgrade! What is a registry problem?

  I have Service Pack 1 is installed, and Windows 7 is activated.
   
  Original title: problem upgrading to Windows 7 Ultimate via Windows Anytime Update

  Take a look at these discussions, the information could help you:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-Anytime-Upgrade-is-not-in-this-edition/6945eacd-7376-4437-9efb-51b4d6fe7f7a

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/Windows-Anytime-Upgrade-does-not-work-with-Edition/53b5b2c0-CFAA-422C-A638-e6228e0cad41

• The upgrade from Vista to Windows 7: How can I make sure that I keep Microsoft Office

  A few months back I took advantage of this offer to upgrade from Vista to Windows 7 for a discounted price. After that I downloaded the upgrade file, Upgrade Advisor told me that because I'm using Vista business and I was upgrade 7, that my computer would probably be home must pass through with a 'clean install', thus wiping my hard drive.

  That's fine with me, I could just move my documents and Favorites on an external hard drive. But I'm afraid that the upgrade will be wipe my Microsoft Office programs.

  I bought this computer a few years ago. I don't even know if I bought the program with office bundled with it, or if I bought it separately (and probably the discs are somewhere in storage).

  How can I make this update without losing Microsoft Office? Is it possible to confirm if my word has come with my computer or if I installed it separately. If it came with it, and I lose it, certainly there must be a free way for me to recover. Right?

  Any other advice for someone planning on the upgrade?

  Thank you!

  You're the one who knows if you installed Office.

  Office (Word, etc.) comes for free with Windows. you have to buy.

  If Office is preinstalled, it was a test.

  A clean installation will wipe everything.

  You cannot transfer programs.

  It needs to be reinstalled from the original media.

  If you do not have the desktop drive:

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon.

  Mick Murphy - Microsoft partner