the upgrade from VISTA to WINDOWS8 - BACKUP.1 does not WORK

Similar Questions

• I can't get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Does not work.

  Remember - this is a public forum so never post the private information such as email or phI cannot get the Microsoft wired keyboard 500 to work on my laptop. I bought a PS2 Connector USB to actually connect to laptop. I also downloaded the software from Microsoft, but still nothing. Do not work.one numbers!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Louise South,.

  Follow the instructions below that may help you resolve the issue.

  Method 1:

  I suggest you to uninstall the software and reinstall it from the link below.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Check whether the problem is resolved.

  Method 2:

  Follow the instructions in the link below and check if the problem is resolved.

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• HP pavilion dv4-1400cto notebook entert, I upgraded the OS from vista to win7, my bluetooth does not

  HP Pavilion dv4 - 1400 CTO entertainment notebook, I upgraded the OS from Vista to Windows 7 system, my notebooks Bluetooth is not detect and also does not, no matter what Advisor.

  Kind regards

  Hello:

  You will probably need to install the drivers and software HP Vista, which should work as well on Windows 7.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-70319-1&CC=US&DLC=en&LC=en&os=2093&Product=3945147&sw_lang=

  Paul

• Downgraded from Vista to XP BUT AUDIO does NOT WORK!

  Hello ~!

  I have a HP Pavilion dv6500 laptop with an AMD processor. Recently, I got drowngraded of Windows Vista to XP by following the guide on this site, but not install the audio drivers (Conexant High Definition Audio Driver) and so I have no sound. It says "ERROR - Driver Installation Failed: could not be found for this driver MEDIA." The same for the Modem driver and the MS - SAU (I tried first by following the instructions). What should I do to fix this? =(

  You use the part 2 of the Guide Downgrade XP drivers? Did you install Conexant using Device Manager as described?

• APEX 5.0 upgrade from 4.2 successful but APEX does not work

  Hello

  I just upgraded to 5.0 4.2 APEX.

  The upgradeprocess is resolved without error.

  But when I try to go to the adminpage (as http://apexserver/pls/apex/apex_admin ) the browser becomes this:

  X ORACLE-IGNORE: IGNORE X-ORACLE-IGNORE: IGNORE X-ORACLE-IGNORE: IGNORE X-ORACLE-IGNORE: IGNORE the Content-Type: text / html; charset = utf-8 Cache-Control: no - store Pragma:no - cache expires: Sun, July 27, 1997 13:00:00 GMT Set - Cookie: ORA_WWV_USER_61817374465583 = ORA_WWV - mKS9zsXl3aEGSO7yn9sMhAo -; Path = / pls/apex; HttpOnly Set-Cookie: ORA_WWV_RAC_INSTANCE = 1; Path = / pls/apex; Status: 302 HttpOnly location: f? p = 4550:10:12821611738183:

  If I try to start an application (like http://apexserver/pls/apex/f?p=110), it shows this:

  
  

  X ORACLE-IGNORE: IGNORE X-ORACLE-IGNORE: IGNORE X-ORACLE-IGNORE: IGNORE X-ORACLE-IGNORE: IGNORE the status: 302 location: f? p = 110: 1:

  The Web server is an IIS with Thot-gateway.

  Someone knows why these error messages?

  Thank you

  Marco

  Hi Marco,.

  next to this IIS with Thot-gateway is not a configuration supported for execution of APEX, I know that Morten is working on a fix for Thoth-gateway resolve the above problems. You must get in touch with him. You can get a beta version to test.

  Concerning

  Patrick

  Member of the APEX development team

• My CD-ROM/DVD-Rom drive & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.

  My readers Optiarc DVD - RW AD-7530 ATA Device DVD/CD-ROM & the Bison Webcam built into my laptop. Does not work after I upgraded from Vista home premium to Windows 7 Home premium.
  Although of course, the CD-ROM drive worked during the upgrade.
  I noticed that when I turn firstly on the laptop, the last two lines of the front entry from Windows 7 are the following.
  PXE - E6i:Media Test Failure, Check Cable
  PXE - MOF: Exit PXE Rom
  During the audit of each Properties in Device Manager devices", I learned that they both work correctly.  In the list in the printers and the @Devices the only Webcam shown is also a "USB 2.0 Camera"
  Can someone help me please?
  Best regards
  John

  Besides what abdelhak says:

  The message of PXE boot that you receive when you start your computer has nothing to do with your CD/DVD-Rom drive. Your computer uses a PXE boot method to attempt to load Windows from a location on your network. Since you do not have this configuration, it is safe to ignore it. If it slows down the startup time of your system, contact your manufacturer and ask them for instructions on how to "disable PXE Network Boot of the BIOS.

  Hope this helps,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Number keys don't work since the upgrade from vista to windows, anyone know why?

  Numbers on my laptop keyboard keys don't work since the upgrade from vista to windows7, anyone know why? Keys of numbers very well work in office and other software for browsers

  See the following troubleshooting steps below thanks Azam K with Microsoft Support:

  Try to activate the numeric keypad and check if it helps, here are the steps:

  1. open on-screen keyboard by clicking theStart button,all programs, Accessories, easy accessand then clickingOn-screen Keyboard.

  2. click onOptions, check thepad box and then clickOK.

  I also suggest you to start the computer using safe mode and check if it works properly, following the steps:

  1 restart your computer if it is running.
  2. tap on the F8 key after your initially on powers computer.
  3. Once you see the menu Advanced Boot Options, you can stop tapping.
  4. use the up/down arrow keys to highlight your selection.
  5. select Safe Mode and press ENTER.
  6. you should see loading drivers and wait please.
  7. you should then be at the Welcome screen.
  8. connect to your computer using an account with administrator privileges.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in Safe Mode, then try to perform the audit and the clean boot, here's the link:

  http://support.Microsoft.com/kb/929135

  If it is not working in Mode without failure, then try the System File Checker and see if it helps, here are the steps:

  1. click on start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  2. click on continue or provide administrator credentials if prompted.
  3. in the command prompt window, type the following text, and then press ENTER:
  sfc/scannow

  Here is an article that will give you information about Scan SFC:
  http://support.Microsoft.com/kb/936212

  I hope this helps!

  OT

  Change options for accessibility on Windows 7
  Control Panel
  l---> ease of access Center
  I---> make the keyboard easier to use
  I---> uncheck "turn on mouse keys.

• I upgraded from PS5 6 PS and bridge does not open in RAW, failure of the AMT, as you allow me to update

  I upgraded from PS5 6 PS and bridge does not open in RAW, failure of the AMT, also will let me not updated and closes bridge down.

  I uninstalled and reinstalled 3 times and always without success. Any suggestions?

  What system are you on? Did you run the Creative Suite cleanup tool inbetween that installation of your tent? If this is not the case, try this to produce a 'clean' with the default installation. Except that there could be a system specific to the issues at stake, but once again, we would need to actually know what system you are on...

  Mylenium

• The product key on my Satellite Pro P300 does not work

  The product key on my Satellite Pro P300 does not work.
  I entered the key from the sticker on the back of the computer. What I am doing wrong?

  Hello

  Why use this product key?

  Firstly the Toshiba recovery image is already enabled and you don t need this key more activations.

  Second, it's an OEM key and it will not work with other versions of Vista!

  Cheers mate

• just upgraded cs6 to css, now matrox mxo2 does not work?

  I just upgraded cs6 to css, now matrox mxo2 does not work? He still works at the cs6.

  You must uninstall the current driver from Matrox and download and install the latest 7.5 driver that supports CC, as well as CS6, on the PC.

  http://www.Matrox.com/video/en/support/downloads/

  Thank you

  Jeff Pulera

  Safe Harbor computers

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• Migrated from DPM2010 to DPM2012 and reporting does not work

  Original title: due tapes dpm powershell online

  Hello

  Can someone please? I migrated from DPM2010 to DPM2012 and reporting does not work. The mmc console crashes.

  I intend to remove DPM and re - install, but in the meantime, I was wondering if anyone knows how to use Powershell to know which bands are due online and also the most Due strips to go?

  I searched through Google on all day, but found nothing so thought I would ask here.

  Thank you very much

  Willie

  Hello

  It would be better if you reposted the question to the Forum 2012 DPM.  Professionals will help you resolve the problem you are experiencing.

  DPM TechNet

• I upgraded Qualcom Ateros and now my wifi does not work.

  Original title;

  I upgraded Qualcom Ateros and now my wifi does not work. How is it?

  I've just updated and now my wifi does not work. I trust Microsoft updates... But this time I shouldn't trust...

  Hello

  1. what operating system is installed on the computer?

  2. How is that you have updated drivers for QUALCOMM Ateros?

  3. what exactly happens when the problem occurs? You receive an error message?

  If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the following link.

  Restore a driver with its previous version

  http://Windows.Microsoft.com/en-us/Windows7/restore-a-driver-to-its-previous-version

  Also check out the following link:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm

• have changed from xp to windows 7, now does not work my usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  You must install the driver for Winows 7 for the camera, * if * it exists. Get it at the web site of the manufacturer of the camera.

  Also, note the following:

  You ever need connect your device directly. Buy a card reader for the type of flash card your camera uses (they are very expensive), put the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is much easier and doesn't use the camera battery. I have two cards - one readers that I keep on my desk next to my desktop computer and another that I keep in my case of laptop for use when traveling.