Office Pro 8500 A910: settings is more standard for printing double-sided on Office Pro 8500 A910?

Similar Questions

• OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards.

  OfficeJet Pro 8500. orientation of the page when printing double-sided it is backwards. How to change so when doc is printed can be read like a book?

  I don't know where to find and change settings.

  can you please help?

  Thanks in advance

  Anna

  Anna

  There should be an option in layout to "Flip on long edge" or "return on the short edge.  Change this setting to change the orientation of the back page.

  If this does not resolve the problem that, please indicate what operting system you have and the number of exact model.

  

• HP OfficeJet Pro 8600 more with Windows 8.1: failure to print double-sided

  Hello

  I recently bought a new laptop with Windows 8.1 software and unfortunately can not print any document double face of any program.  While I can easily print the documents double-sided on other computers running earlier versions of windows, it doesn't seem to be any option to do it at all on my laptop.

  I see that this problem has been resolved with the older versions of windows, but solutions are not easy to follow in windows 8.1. Here are my stats from the printer and thanks a lot for your help!

  printer: HP OfficeJet Pro 8600 Plus

  OS: Windows 8.1

  Connected via wifi

  Hi duneser,

  I understand that you have a problem with duplexing in Windows 8.1. I'll try my best to help you solve this problem.

  Because the printer print double-sided on the lower version of Windows, it may be the software and drivers installed on the Windows 8.1.  I suggest to uninstall the printer software , then using the printer HP install wizard for Windows to install. This tool will search for the right software and drivers to install for your printer.

  Once you have reinstalled here is a document for printing on both sides of the paper (duplex printing) with adjustment steps upwards and double-sided printing.

  I hope this helps, let me know how it goes.

  Thank you

• 6500 a more don't stop printing double sided

  Good afternoon

  I have a HP Officejet 6500 has more and I can print the mac computer. All of sudden my printer ONLY print double-sided, but only one of my macs. I checked all the settings and even if it is not set to print double-sided, it continues to do so.

  I need help ASAP!

  Thank you

  MMD

  Welcome to the MMD31 forums,

  I understand that you are only able to print double-sided to your JO 6500 has more. I will do my best to help you with this.

  Please try:

  • Mac OS X: how to reset the printing system
  • Restart the computer
  • Re-add the printer (make sure that you add the HP driver and not the AirPrint)
  • HP Officejet 6500 a Plus e-All-in-One - E710n drivers (Select your Mac OS X, click on Next, drivers and you are looking for the full functionality Driver download)

  I hope that helps!

  Happy Monday

• HP Officejet Pro 8600 - the back of sheet 1 is empty on a PDF printed double-sided.

  When printing double-sided pdfs of three pages or more, the following happens - first page prints on the front of the first sheet of paper, on the back of the sheet is empty. The second sheet has pages 2 and 3 and so on. When I print the same document on a laser printer - it prints well (first leaf has pages 1 and 2, etc.). When I print the exact same documents for Adobe Reader on my machine Windows 8, it prints very well. This happens with Adobe Acrobat or Adobe reader. Print the Word version of the documents works as advertised. I have already uninstalled and reinstalled the drivers of HP printer, Adobe Acrobat Pro, and Acrobat Reader. Occurs with several documents from multiple sources.

  Details-

  HP Officejet Pro 8600 - latest version of the driver from the HP Web site

  Adobe Acrobat - Version 11.0.04 (last updated)

  Adobe Reader - Version 11.0.04

  MAC OS X 10.8.5

  Printer connected to the modem cable Arris TG862 via a Cat5 cable.

  Mac connected to the network via Cat5

  Laser printer direct connect for Mac with USB cable

  Windows 8 machine connected via WiFi.

  Any ideas?

  Thank you very much

  Paul A. Simpson

  Hi Paul.

  I have not found Adobe documents that might help you with this problem.

  I have some other suggestions to offer. I'm glad that everything works.

• Color Laser Jet MFP M277 Pro: Can I scan a document on the HP MFP M277 Color LaserJet Pro printer double-sided?

  Hello

  What I can and, if so, how to scan a document double sided on the Color Laser Jet Pro M277 HP printer MFP?

  Thank you very much

  Paul

  Hello

  No, it only supports printing double-sided, recto verso but scan copy not duplex from the Manual:

  http://h10032.www1.HP.com/CTG/manual/c04474163.PDF

  Kind regards.

• Pro Jet 8620 how to print double-sided A5 for the book I'm writing

  I am a first place writer and my guardian forces me to use the A5 format. I was assured only the HP Jet Pro and a brother could printing double-sided a 5.I havetried printing without result. I ealize I beyond the use of date for modern technology, but I'd be very happy ay advice on A; is it possible on this printer? B:how is it achievable? Best regards, Warrigal.

  Hello

  Just the printer does not support this. Please check the specifications following, listed under handaling paper > paper sizes supported:

     http://support.HP.com/us-en/document/c04085902

  (No "tick" under pass duplexer).

  Kind regards.

• Affecting HP OfficeJet Pro 8610 without borders on and printing double-sided "return on the long edge.

  I want enabled no border and return on the long edge, I got another printer installation.  But on the 8610, I get the same dialog box and chose of ' keep this setting, and I will change it later ", but it does not allow me to have the two settings in this way.

  I have some WONDERFUL NEWS!

  The 8610 printer (and it was the printer 8600) replaces my HP
  OfficeJet 9110, which I've owned for about a decade.

  My "existing" Linux computer cannot print on it.  (I have a very old)
  Version of CUPS and at the time I gave it - and I don't have a lot of time
  -I have not been able to install a more recent version.)  But, my most recent office
  Computer Linux is a system of 20 of Fedora.  (And, the goal is to have the most recent
  Linux Desktop become my Linux after I get everything copied and
  configured for it).

  Last week, I installed a new version of HPLIP on it.  Is not only
  It give me the ability to print in duplex/duplex, but it also prints
  without borders!

  I am able to print without margins and double-sided printing, using half of the book
  Once again!

  I'm happy with that resolved, now that I've installed marked HPLIP!  :-D

  Barry

• HP 8630 OfficeJet Pro print double-sided on legal size paper

  I just bought a HP OfficeJet Pro 8630 can I print successfully on each Board standard size paper and print on legal paper (from each drawer).  I can print one side, but the driver seems not to allow the duplex legal communication.

  I tried in all stores (I have read on the set 2 only for plain paper, but as I understand it, which applies only to the brilliant vs plain and not of different paper sizes).  In any case, I put my legal paper in Tray 1 and set tray on shift, and the default for tray 2, which seems that it will be a good idea in the future, when we use envelopes, etc.

  But...  The problem that I'm having it is when I go to the printer properties dialog box, if I use duplex printing either on the long edge or short, the legal (and most other choices for paper sizes) have a yellow/triangle exclamation point icon and if I ignore the warning to resolve differences, which either don't let me out of the modal dialog box , or it will just print single-sided anyway.

  I can't find someone else complain that duplex printing legal size does not work, it seems as it should be, but I am at a loss of the configuration of the printer to make it work.  Any ideas?  Success stories?

  I use the latest firmware (FDP1CN1416AR, patch, version 0) and the driver (just downloaded, can't figure out how to get the actual number of installed version)

  Thank you.

  Hello

  The duplex accessory does not support Legal paper size, it is an expected behavior.

  You can perform manual duplex printing using Pages of print options to print the odd pages only, then replace the printed sheets and send other pages even only... the Pages of print options print job is under print options > Layout > advanced.

  You can find the printer specifications below, check the duplexer column according to the specifications of paper output > paper sizes supported:

  http://support.HP.com/us-en/document/c04085902

  Shlomi

• hpofficejet pro 8620: access to printing double-sided on officejet pro8620

  Just bought hpofficejet 8620 had problems with the installation. Finally up and running.  How can I access the functionality of duplexing.  My duplexer is in position.  Is there some setting or application to allow printing side two.  It does not appear in the dialog box print at all.  With the help of tour Pro Mac OS x 10.6.8

  Hi @popdo,

  Thank you for visiting the Forums from the HP Support! I understand that you do not want to activate the option to duplex printing for your HP Officejet 8620 on your Mac running OS 10.6.

  I would like you to start here: print on both sides of the paper (duplex printing) under Mac OS X v10.6 for printers HP all-in-one

  I hope this helps.

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• LaserJet P1102: printer connected to the macbook pro does not let me print double-sided

  I have a macbook pro and an hp laser jet p1102 printer. I checked the duplex printing option, and then the printer printed the first parts of the document, I wanted to print. Then a message appears - "manual Duplex: without changing the orientation, remove the paper from the output of the battery tray and insert into Tray 1 print side down. Do not discard the blank sheets. Then, press the button to go. " I re-inserted paper, but then what I do next as I don't know where this button is Go! Help, please

  Hi @insy,

  I have read your message and see that you are trying to print manual duplex and you get the message to press the Go button. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "" accept as Solution"" down below this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Please, try the following steps to see if it will help solve the problem. Do not take into account the operating system in the title. A solution for this problem is developing. Check the HP website for updates of software and firmware.

  HP LaserJet Pro P1102w printer - Macintosh: only manual duplex printing prints on one side in OS X Version 10.6 when it is connected to a wireless network.

  Good day! Thank you.

• MacBook Pro: set double-sided printing by default for printing HP 8600 over Word

  Can I set duplex printing default for Word on my MacBook Pro documents. ? I undertand how to set type for a docukment of words individual, but want to set as the default value for all the word - and all the documents. I can do this on my PC.

  Hello

  You can set as default on Mac as well, however that works very different from Windows.

  First define the printing parameters for printing Double sided, then click the Presets menu and select 'Save the current settings as a preset' advance, completing the print job.

  By default, a used preset will remain until another preset will be used.

  Shlomi

• Turn off double-sided Excel printing on Mac with HP office jet pro 8600

  I see a lot of forums about this issue but no real solution.

  I have a HP officejet Pro 8600.  I used to have a small HP but never had this problem.

  I agree that in word, you get the box to uncheck if you don't want to double-sided printing. BUT when in Excel, you don't get the same printer option and I can't find anywhere to stop printing double-sided to Excel.  It's so boring.

  Can anyone help please?

  Thanks in advance

  Hello
  Please follow the steps below for dosed duplex printing:
  
  Go to Excel, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized. Click Show details to see all the available parameters.
  
  Click the Copies and Pages in the print dialog box.
  
  Select layout from the drop-down.
  
  Set the duplex option as Off
  
  You can save the settings for later use by clicking preset > save current settings as preset. By default, a used preset will remain until another preset will be used.
  
  Kind regards
  Shlomi

• Photosmart C7280 - Double-sided printing from Office 2011.

  I just switched to a MacBook Pro, Mac OS 10.8.2, running and have installed Office 2011. While I can print double-sided of my web browser and when printing PDF files, there is no option to print double-sided when direct printing from Word. Can advise you. Thank you

  Hello

  Follow the steps below to print a two-sided from Word:

  The Word open the print dialog box, open the Copies & Pages menu and select layout.
  Set the duplex as the type of connection required

  You can save the settings for later use by clicking preset > save current settings as preset.

  Shlomi

• Best settings for print-to-pdf for news

  Hello, can anyone recommend settings appropriate to use for printing in pdf format of newspaper clippings from a web browser? I archive items of information in PDF format sites, which I then use later for the two reading on PCs and laptops and print devices. Specifically, what standard pdf is better to use in this case? I plead mainly because the text in PDF files that I have done so far is much less smooth and hard to read I thought it would be when viewing on pc even with acrobat 10 smoothing turned on. It makes the right edge of letters seem to be cut off. Mind you, I am interested in the pdf to 86% (adjustment of the height); When I zoom to 100%, the text becomes smooth. And PDF files also seem very clear on my portable devices. My screen is 1920 x 1080.

  See you soon

  If it's a graphic, then a higher resolution would be useful. You should be able to tell if it's a chart zoomed out and checking the pixels. If you capture fonts, then they should look the same at any zoom. You can, of course, that the fonts are included. As a check on some of the questions, try the press or print settings to see if things improve. The other option is to go back and change the settings for a custom, but good form to start with one that look reasonable first - or at least compare some of the settings files. There are other problems of print resolution (the default 1200 dpi value is usually much more you need).