Office XP will always work in W7?

Similar Questions

• Start Microsoft office 2010 will not work

  MicrosoftOffice 2010 will not work on my g - A6 notebook series

  Hello:

  See if repair works... info on how to do this on the link below.

  http://Office.Microsoft.com/en-us/Starter-Help/Update-repair-or-uninstall-Office-click-to-run-products-HA010382089.aspx

  Paul

• Want to updgrade of nto 8.0 windows 8.1 on my new computer, and then turn on my micrsoft home and office 2007. will it work?

  My office 2007 will activate in each version of Windows?

  Yes, Office 2007 is compatible with Windows 8 or 8.1 of Windows. You can also use the phone activation if Activation Internet does not work:

  Microsoft Office Activation number:
  http://support.Microsoft.com/kb/950929

• Cancelled and uninstalled PS CC and now my Office CS6 will not open

  I tried the plan of photography CC but cancelled and uninstalled PS and Lightroom as directed. My CS6 installed office previously will not work now. I get a box of Creative cloud open and asks me to wait... She turns immediately and never stops.

  I called Adobe and said CC changed my version of office and creative cloud is interfering. He uninstalled creative cloud and PS and said I should reinstall the PS with my original disc. So I did but the result is the same and PS is completely unusable... does not open! Looking for help with what I am at a loss to know what to do.

  Cloud of reading takes up https://forums.adobe.com/thread/2089127 for some ideas

• my windows photo gallery will play is no longer my videos (they have been there for 2 years and always worked before, now when I try to play them just the photo gallery)

  my windows photo gallery will play is no longer my videos (they have been there for 2 years and always worked before, now when I try to play them just the photo gallery)

  Maybe some type of update caused a compatibility issue.
  Doing a system restore to an hour before the beginning of the question could
  be worth a try:

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• Will not work my Office Gadets, any ideas on how to fix?

  Will not work my Office Gadets, any ideas on how to fix?

  Hello

  I advise to check on the following website: http://support.microsoft.com/kb/2515657
  It contains information on doesn't work does no gimmicks and information about the gadgets are not displayed correctly.
  See also http://windows.microsoft.com/en-PH/windows-vista/Windows-Sidebar-and-gadgets-overview
  This link explains on the gadgets and the sidebar, how to open the sidebar and explains the main features on the gadgets.
  Thank you
  I hope this helps.

• Coral psp x 2 will not open has always worked before running w7

  Hello
  Paint shop pro Coral does not open I use windows 7, it has always worked before.
  Jackie

  Hello

  1. what happens when you try to open the application?

  2 have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  Uninstall and reinstall the application.

  Uninstall or change a program.

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

• If I update to OS El Capitan my Adobe CS4 work / will always be compatible?

  If I update to OS El Capitan my Adobe CS4 work / will always be compatible?

  Good question! I want to encourage you to ask even though I have no answer for you. I'm trying to find our something related. I have CS5 Master Collection for Mac and want to know what Mac computer and OS X version to buy it to support my CS5 programs effectively. If you use a Mac, it would be very encouraging for me to hear that you are able to use CS4, especially if you have a recent version of OS X. I would be very interested to know the kind of computer you have, what version of OS X you are using, what programs are included in your package of CS4, and how well the system and the OS X version work with CS4. If you want to reply, please go to my question on this link: https://forums.adobe.com/message/8706596#8706596

  Thank you! Best wishes to get an answer that helps you!

• If I sign up for Photoshop and LR CC on a monthly basis and you decide to stop after six months, I will always be able to access, to work on images that I've adjusted? [was: Adobe Photoshop LR CC?]

  Hello people,

  I have a question regarding membership of Photoshop and LR CC.

  I know that its probably been asked and answered repeatedly, so forgive me for asking again.

  I installed Photoshop CS6 and Lightroom 6 on my Imac as stand-alone programs.

  If I sign up for Photoshop and LR CC on a monthly basis and you decide to stop after six months, I will always be able to access, to work on images that I've adjusted in CC, with versions of my stand alone CS6 and LR6?

  Thanks for any help provided

  When the CC subscription plan, if you cancel the subscription, the LR develop module is disabled. You can always view and export in the library module.

  At this point, if you have the stand-alone version you can use that to get all the features. You may need to uninstall the software CC and reinstall the stand-alone software.

  I saw a few conversations that suggest using two different emails for two different licenses makes things much easier.

• HA is located on the hosts; If the server vSphere is unavailable HA will always continue to work?

  Hello, I found the following question on the page Simonlong and I was sure it was incorrect.

  Which of the following are valid reasons for the deployment of vCenter Server on a virtual machine (choose 3)?

  A. vCenter Server must be deployed as a VM to migrate using VMotion

  B. vCenter Server must be deployed as a virtual machine to support the recovery by using the Site

  Recovery Manager

  C. vCenter Server must be deployed as virtual machines for joining a group Linked Mode

  D. vCenter Server must be deployed as a VM to be protected by a high availability

  E. vCenter Server must be deployed as a virtual machine to support using vCenter data

  Recovery

  Answer: ADE

  I didn't know that d was correct.

  So my question is, when HA is located on the hosts; If the server vSphere is unavailable HA will always continue to work?

  VMware HA is intalled on the side of ESX and can also operate without vCenter Server.

  vCenter Server is required to configure each host for HA, but then (per HA) is not necessary.

  André

• The cutting tool will not work in trying to capture the menu drop-down

  I've recently upgraded to Office 2016 from 2013 and since then my Snipping Tool will not work correctly. I can always capture what I want except for the drop down menus. Eight other users are connected to my network of the company; all Windows 7, all Office 2016 and it works on all the computer but mine. I opened the Snipping Tool, click Cancel (tried to escape, too), and then open the menu drop down, press Ctrl + print screen and nothing happens. Can someone help me?

  I just thought of it myself. Used to work in previous versions using the Esc, then press Ctrl + print screen. Now, it's a little different.

  1. Your screen are preparing to capture you want, with the exception of the drop down.
  2. Open the capture tool and choose the type of capture you want (I use the Rectangle) and now the new part... Choose a delay for however many seconds you have to when you press New when you can open the drop desired down.
  3. Click new. (The capture tool will activate not to but the number of seconds you have chosen late.)
  4. Open your drop desired down and wait for the tool.
  5. Proceed as usual.

  Hope that helps!

• New Windows 7 Professional program is not working nd that product key will not work.

  Windows 7 (trial version) program has been installed on my laptop ACER One. Passes to the Home Premium account in 2010. Recently, it is impossible to use Word documents or to modify existing files; box popped up that the test program has been exceeded and when I tried to enter the product key, it was not accepted. Today, I bought an upgrade to Windows 7 Professional. However, always receives the same message and the new product key does not either. Am I missing a step to activate the new program? I got the message that it has been installed successfully.

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

  Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

  Here are the current models of Brother products which are supported.

  http://support.brother.com/g/s/ID/OS/Macintosh.html

  If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

  Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

• Portege M750 Win7 64 bit Wireless Manager (3G) will not work

  I can't TOSHIBA Wireless Manager (3G) to work in a new installation of Win 7 64 bit.

  I did a test installation of Windows 7 64 - bit on and old SATA hard drive and checked TOSHIBA Wireless Manager would work. He did.

  I then did a fresh install of Windows 7 64 - bit on a new Crucial C300 Real SSD 256Go.

  The new facility with the Crucial SSD is not very successful... The operation "stop and restart" does not - the closing not always power off completely and you must push the switch down to.

  Sometimes the SSD does not start - you enter the password of the BIOS but then nothing happens. Sometimes you turn off the power and remove the battery before as the startup disk.

  But the biggest problem is that the (3G) Wireless Manager will not work. The application opens and indicates that "died" - which it is impossible that I use WiFi to post this question.

  I tried to install the software Vodafone 3 G portal. It detects the presence of the 'mobile device' (SIM in housing) but then can not turn it on.

  I downloaded and installed all the latest drivers for the chip, the pilot 3G, 3G software, LAN driver, LAN software and all updates of Windows 7.

  I have the latest version of the BIOS (3.0) but this has not been updated by Toshiba since 11/04/09.

  I would point out that Diagnostic PC Toshiba tool does not recognize the installed 8 GB memory (but ccleaner):

  Model name PORTEGE M750
  Part number PPM75E-00N017EN
  Version of the OS Microsoft Windows 7 Home Premium 6.1.7600
  Version of the BIOS Version 3.00
  Processor Intel (r) Core (TM) 2 Duo CPU P8400 2.26 GHz
  Physical memory 4096 MB RAM
  Disk capacity hard 256,052,899,840 [bytes] 238.468 [GB]
  Network Intel(r) 82567LM Gigabit Network Connection = 10.0.2.2 version = MAC address
  TOSHIBA F3507g Mobile Broadband Network Adapter version 1.3.0.9 = MAC = address
  Version of Intel(r) WiFi Link 5100 AGN = 13.4.0.9 = MAC address
  F3507g Mobile Broadband Modem Modem TOSHIBA version = 5.24.3.0
  Internet Explorer 8.0.7600.16385

  This indicates a BIOS problem?

  -don't

  points to a problem of firmware on the SSD drive (is it sandforce) torque to the incompatibility of BIOS of the SSD.

  I assume that all drivers installed etc were identical on the installation of the trial of HARD drive? so if this is the case it must be the SSD does not not with the BIOS correctly, so the other issues as well

• Re: After the secondary display (Beamer) system recovery will not work

  Hello

  I had a problem with my Thosiba laptop! (Detail of the system name follows... later)

  I saw the first time that the sound chip of Yahama is disabled (disapper) caused by Windows Update and I
  couldn't find a way to recover / install the correct driver.

  So I decided to... abandon with timewasting and start the system recovery process.

  After recovery finished... the sound was so back and during the update process (Windows)
  ... he ' has been disabled again, but this time I could install the new correct driver.

  After that I withdraw my notebock installed to work (her again) I connect a projector
  the connection of secondary vga... and what a surprise
  the projector doesn't show ANYTHING... before that it always works

  Anyone an idea what could be the reason for the error?

  My system runs XP Home (updated to SP3 and corrected)
  The SAL is a GeForce G 400 (installed the CD-Rom driver)
  ... I could not download the latest driver vga... because he had a temp. problem with Webaccess
  I get the rigt ip-installation (just FYI you)

  If you need more details please ask... I will answer all right, I can

  Thanks to all how to read this (and full of hope help out me)

  This message is from Germany... you could read in English!

  > I had a problem with my Toshiba laptop! (Detail of the system name follows... later)
  Why later? Can you put a laptop model name?

  However, the laptop can switch to the external video port using the FN + F5 key combination.
  Please check this!