Officejet 5610 prints a line waits 20 seconds etc etc.

Similar Questions

• Officejet 5610: Printer all-in-one Officejet 5610 laptop

  Until yesterday, I had the printer all-in-one HP Officejet 5610 installed on my PC (Windows 7). Now he's disappeared! When I try to install a new driver, it seems to download and install, but I'm not and it does not appear in devices and printers.

  Hi @Casona,

  Welcome to the Forums of HP Support! I see by your post that the printer does not appear the window devices and printers, even after reinstalling the software. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would say to restore your computer to an earlier time when everything worked correctly, System Restore for Windows 7

  Please let me know the results and if there is anything else I can help you. Thank you.

• my hp officejet 5610 printer prints very small

  My all-in-one officejet 5610 hp printing is printing letters very small when I print a document, I try to change it but still not working.

  bernabe125 wrote:
  My all-in-one officejet 5610 hp printing is printing letters very small when I print a document, I try to change it but still not working.

  What program are you printing from?  What settings have tried to change?

• 5740 HP Officejet printer: HP Officejet 5740 prints all lines of poor quality of black ink, a few lines thru

  New printer, getting the veins through every few lines of print black ink

  Hi @Badgermitt,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Officejet 5740 e-all-in-one printer with a PC of Windows 8 and the printed text has black steaks through every few lines. I would like to help with that.

  Black lines through the text is usually due to present an accumulation of debris around of the cartridge that can usually be solved by cleaning cartridges or ink. This can be done in the control panel of the printer.

  Cleaning of the cartridges is discussed in this support material designed to be used with this problem - solve print quality problems.

  Please let me know if that solves the problem, or if you need assistance.

  In fact, if it helps you to find a solution, please click on the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• All-in-one HP Officejet 5610: print gets stuck every time

  Hey,.

  For some reason my printer has been giving me a hard time lately--whenever I have print something, it starts printing after 1 line it gets stuck, gives me an error of "Printing cancelled" message and nothing happens.

  I changed the ink cartridge, I've deleted and reinstalled the driver and same thing - even on the once reinstalled Test Page.

  What could be?

  Thank you!

  Well, the problem is related to the job queue on your system or your network.

  Let's start by ensuring that the printer is plugged directly into a wall outlet and not a surge protector. Once it's done:

  1. If the USB cable is connected the printer to the PC, remove it.
  2. Click on start and devices and printers.
  3. Right click on all the icons in your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. Uninstall any software associated with the printer.
  7. Download the latest drivers by clicking on this link.

  Now, we should be able to print without any problem of speed.

  Please let me know if you are able to print without any problems at this point or if you have other questions. Otherwise, have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• HP Officejet 5610 print queue

  How to remove an object stuck in the queue with the status "deletion"?

  I can't delete or remove the printer.

  See if it helps:

  Unable to print? Print jobs are stuck in the print queue
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&tmp_track_link=ot_faqs/top_issues/en_US/c02205477/loc:3 & cc = us & dlc = en & lang = en & lc = en & product = 441125

• I've upgraded to snow leopard and now I can't scan with my HP Officejet 5610 printer. Help!

  I can print fine but can not analyze is the computer printer/scanner. Ideas? Suggestions?

  You have installed the latest driver for Mac OS X 10.6?

  If this isn't the case, uninstall the HP software by using the option of the scrubber:

  Applications > Hewlett-Packard > HP uninstalled

  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall

  Approve the alert to remove softwar any installed HP

  You restart the mac and install the latest version of the software

  http://FTP.HP.com/pub/softlib/software10/COL30237/MP-75101-1/HP_Installer_Inkjet_Full_Group07_10.3.dmg

  Install the latest updates from HP, Apple: Apple Menu > software update

• How to clean a HP all-in-one Officejet 5610 print head?

  I use a HP no. 27 and a HP #22, each one about half full of ink.

  Head cleaning, for normal users, is possible directly in the drivers Windows 7 or any tools provided printer software that is compatible Windows 7.

• OfficeJet 5610 install not on Windows 7

  Our new Dell Pro Windows 7 64-bit system will not install the all-in-one OfficeJet 5610 printer software.

  First attempt of installation since the downloaded software and driver from the HP website.

  Second attempt from the CD that we purchased at HP for Windows 7 specifically.

  Attempts to start the installation, it passes by the process of extracting the files... and then the installation screens go away and never come back.  There seems to be no kind of progress bar or error messages or the other.

  We went through the suggested topics to disable startup programs, TSR, uninstall previous installations etc. but without any help.

  I have not tried to install this on another Windows 7 system yet, but it's my other next step in this weird problem.

  Please help this confused soul.

  Thank you
  
  Kim

  This problem is now solved...

  The process of setting was to unplug the USB cable from the printer.

  Remove the printer from the list of printers in the printers on Windows 7 and peripheral area

  Run the software provided on the CD from HP (probably could use the downloaded files from HP support)

  The installation after you select INSTALL from the pop-up window (it will show also read - me, etc...)

  The following screen speaks of warnings and you must check the "agree"box to continue

  This next page is where I clicked on each of the four options and modifications

  The part that shows each item to be installed is the place where I unchecked all except the first checkbox
  Make sure that you open and exit of each 4 selections (they take a different color when you do)

  Click on the button continue, and this time, you will come to a point where the software finally will ask you to connect the Flash DRIVE to the printer.

  Now, rerun the package a 2nd time and a screen will come asking you to install "additional software".

  Select each (OCR proper recognition, shop for ink and paper etc...) and let the software run to the finish.

  Now restart your system and "solutions" HP center icon should now be on your desktop.

  BTW, I tried to use the 'install your printer on Windows 7 Wizard' and the different 8 times, he tried to download 380Mb file, he finished only once.  Other times, he died on the time and amounts by saying that the 'download has been cancelled' Nice a HP... Attach it to a minimum so that we can continue with a download point of failure vs having to start over from the beginning. 8 x 17 minutes is 136 minutes of time lost.

  Please mark this as a correction of a problem.

  also please email me at {removed personal information} if anyone has questions about this problem.  I'd love to help you.

• H/P 5610: printer problem

  Printing text on the internet is so light that it unreadable. Printing from the computer and using the copy is ok. I can e-mail prnt, it's a bit darker and more readable.  Are there any settings that I have czn amendment to correct the problem.

  Hey @jimcack,

  I'm sorry to hear that resettlement was no difference to the internet print quality.

  Because each document prints correctly, with the exception of web pages there is no chance that it's your hardware printers affecting this quality. Just to check the hardware on your printer one last time, I'll have to print you a diagnostic quality report.

  1. Press the left arrow and right arrow at the same time on the front of your printer, and then release the two buttons.
  2. Press 1, 2, and 3. The Service menu appears.
  3. Press the right arrow button twice. The special reports menu opens.
  4. Press OK.
  5. Press the right arrow once. Opens the menu of the print cartridge .
  6. Press OK. The diagnostic page prints.

  

  1. printed by the right cartridge

  2 printed by the left cartridge

  This report should print with net and black colors that there are no problems with your printer. Therefore, we can try another driver on your computer to see if that fixes the problem with printing from the internet. If this report is printed with quality problems, don't spend troubleshooting at the moment.

  How to add another driver:

  1. Open your screen Startup by clicking the Windows button in the lower left corner of your computer screen or by selecting the Windows key on the lower left of your keyboard to the right of the Ctrl key.
  2. In the screen type start "devices and printers
  3. In the devices and printers folder right click on your printer all-in-one HP Officejet 5610 and left click on printer properties
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit Next to complete the wizard driver new
  10. Under the printer properties window, select "Apply", but don't hit not OK
  11. Select the general tab
  12. Rename your all-in-one printer, HP Officejet 5610 printer
  13. Click OK
  14. Finally, right click on your printer all-in-one HP Officejet 5610 one more time and left click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its normal fast
  17. Press apply and OK

  Now that the other driver has been added, please test printing from a Web site again.

  Please let me know if these steps don't resolve your problem. Good luck!

• OFFICEJET 5610 all-in-one: PROBLEM WITH OFFICEJET 5610 all-in-one

  I used an all-in - One HP 5610 since 2008.

  A few days ago the printer stopped working and gave me "error: 0xd05d010d Reset power", the lights on the buttons 'ON', 'COPY', 'FAX', 'SCAN' and the 'QUESTION MARK' on the front panel are on.

  I tried each proposal given by other users, for example to remove cartridges, reset the printer with #3 or #6 or #9, remove usb cables and electricity... but no result.

  Finally, I am in front of a printer will not work for me, with all of the above, more continuous "beep" and removed cartridges.

  Is there other option/proposals to test?

  Tanks in advance for your help;

  Hi @pankal,

  Welcome to the HP Forums!

  I understand that you get the error: 0xd05d010d Reset power with your HP Officejet 5610 printer. I am pleased to see that for you!

  "Please make sure that the steps in this guide, ' 0xc19a0005" or similar error screens are completed.

  If this does not resolve the problem the printer will need to be repaired / replaced. Please Contact HP phone support for hardwareoptions. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I hope this helps!

• HP Officejet 5610 all-in-one printer have something that can be attacked by a virus?

  I have a "HP Officejet 5610 All in one printer" running Windows XP Home edition (32 bit).

  I tried to print a file that I had been sent and the printer began to print very slowly (one line / 5 seconds). At the end of the document, which had been printed was a load of rubbish! The next print was ok and printed at normal speed. BUT now, whenever I try to "Scan" a document using 'Microsoft Scanner and Camera Wizard', the 'Wizard' can take up to 1/2 hour to load when it is used for the scanner. If used for the camera the Assistant immediately.

  I downloaded and installed the latest HP drivers and still have the problem.

  Is there something inside the printer [ROM?] that can be attacked or is this a rare case to be an error of 'material' with a four year old unit. It is interesting to try to have it fixed or can I get a new camera? If so, which is recommended for a system of "consumption"? -Many thanks.

  Hi Semajleep,

  I would recommend printing HP and the Scan Doctor running. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the link below for more information on how to download, install and run this tool:

  http://goo.GL/MzwLH

  I would like to know if this helps or not.

• HP officejet 5610 all-in-one does not print one when it does print a map from 2 months ago.

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

  Who is this?  Do not print or print the old data?

  Under what circumstances does the former print job print (for example, after restarting)?

  Follow these steps:

  Open a command prompt window (start > run > cmd > OK)

  Type the following command and press ENTER after each line:

  net stop spooler

  del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]

  net start spooler

  output

• HP OfficeJet Pro 8620: RDP 8620 Officejet prints strange lines

  I tried to find an answer to this for almost a month.

  We have a HP Officejet Pro 8620 and we want to be able to print from a remote computer to ours. The printer is shared.  We'll call the local computer pc1 and the computer remote pc2. PC1 remotes in pc2 using a standard Windows 7 Remote Desktop connection. PC1 sharing their printer with pc2 by redirect. the sharing of each resource to which is connected to it. PC1 is trying to print, and then waits. The printer that is connected to the pc1 via USB cable gives us a message that looks like this of course is not what we want when we try to print an Excel worksheet. No, this is not the complete document. This is the first 1/3 or the page and the rest is completely white. It almost looks like a code any. I installed the drivers on ppc1 both pc2. I tried the drivers universal instaslling. I was told that get this work 4 years ago was very easy, but I could not crack. Any advice or assistance would be greatly appreciated.

  Problem has been resolved by the default driver. Has not reappeared since we have updated for the generic driver for 8600. Had to install the driver on the two machines.

• HOW TO PRINT FROM TABLET RT FOR HP OFFICEJET 5610

  Help!  I have a new tablet.  I use old operating systems of Windows on an old Toshiba laptop for years.  Now, I have a tablet of RT and it seems everything has changed!  I downloaded the driver for my HP Officejet 5610 all-in-one and it would not install it.  He recommended that I go to the "store".  What the devil?

  Hi MontanaDawn, welcome to the Forums of HP. RT of Windows does not use the driver installs as in ordinary Windows. Printer media shall be natively for it to work in Windows RT. RT of Windows supports several HP printers, I don't know if it's a printer supported however. Plug the USB cable and the RT Windows Installer if he can. If it is not this printer will not work with this operating system.

  If this does not work, these documents will show you how to print and scan.

  Simple printing on a tablet with RT and Windows 8 windows
  
  How to scan Windows RT or Windows 8 tablets