OfficeJet 6000: service station

I have an officejet 6000 needed the cleaned gas station. Any one know how to down the hood so I can get to it. ink from the printer works fine, it's just that when the printhead is parked for a period of time, it leaves bloches and I have to remove the print head for cleaning.

cordially V. Presta

Here is the link to the site that showed me how tell - assemble an officejet 6000, so that I could clean the service station. The site is Korean but I don't need a comment that the vid is very detailed.

http://www.YouTube.com/watch?v=RmjuHg3Z8-U

vmpresta

Tags: HP Printers

Similar Questions

  • HP Officejet 6000 609(a): Officejet 6000

    I now want to use this printer for black and white text only. This 920 cartridge needs to be replaced and all colour cartridges show as empty.  I didn't print in gray scale and do not use colors for awhile. Can I just replace this cartridge black & white and forget the colors? as these are expensive to replace, and I'm not going to use them?  I don't want to make this investment in color if possible with this printer Officejet 6000 609(a).  Thanks for the tips!

    I just bought the Multipack cartridges at great expense... but just for a test before it is replaced, I printed a Test Page.  The old B & W ink cartridge works perfectly, although the colors were very thirsty (I don't need them anyway).   It is a strange behavior, like the last time that the printer has been tried on a document, the results were so washed out as unreadable.

    So, "if it ain't broke, don't fix it" applies to me.  Moral: my printer will get the long OK until it is absolutely out of B & W. Then all of the cartridges will be replaced if necessary.  The box has a long service life ).

  • HP Officejet 6000 a: after far right stuck paper jam

    HP Officejet 6000 a and Windows 10.

    After jam paper and jam, clearing printer turn on, goes through current transport parks, start right, flashing lites power and resume. Doctor says print "general Printer Error. Transport to open the lid does not come to Center and did not manually move parked at the far right. Close the cover, flashing lites power and resume, press summary and unplug the power cord when the cart is centered. Remove print head, close the lid, back the start-up routine. Open the lid and now transport stops in the Center and all the lites normals. With lamp torch and lid open (with cardboard in photo electric switch) and print head installed in position, pressing on the set of the view CV under presses of subsequent print head print head to prevent fresh ink while the printer is in sleep mode, remove the cardboard (lid open simulating) tray does not move downwards releasing the print head. Has gone through all six steps of the Solution and no help. Impossible to open the case to observe the load mechanism. Nothing else to try? Printer purchased January 2011 and printed only 5003 + pages and no problems so far. Do not throw with using more than that most just bought full set XL HP 920HP cartridges. should be possible to solve other than maintenance workshop, can buy nine being the least expensive.

    Help, please. Thank you

    Jesse

    Hi @jlmulanax1,

    Welcome to the Forums of HP Support!

    I understand that this transport on your HP Officejet 6000 a printer does not move correctly. I will definitely do my best to help you.

    I would try the steps in Th guides, r HP Officejet 6000 (E609) and 7000 (E809) Wide Format Printer Series - an "impossible cartridge" or "incompatible cartridge" Message is displayed on the calculationand lights flashing on the HP Officejet 6000 (E609a) and 6000 (E609n) wireless printers.

    You describe it sounds like the transport has stalls and if this is the case and you are unable to find the obstruction while the transport mechanism is defective.

    If you have completed all the above steps and your product still has a problem, service the product.

    Contact HP for service in all countries except Asia-Pacific.

    First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
    Cost of repair out-of-warranty printers may apply.
    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
    Step 1. Open the link: www.hp.com/contacthp/
    Step 2. Enter the product number or select Auto detection
    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
    Step 4. Scroll down and click on: contact HP options - click Get phone number
    File number and phone number are displayed.

    Hope that answers your question. Thank you for posting!

  • HP Officejet 6000 E609n series 'disorder with detected printer.

    Original title - HP Officejet 6000 E609n series

    Printer does not print.  Connected to the network - ok.  Troubleshooting not detected any specific error but listed "trouble with printer detected" at top of list.  Printer agrees and sends the sheet of paper through but it comes out of the Virgin.  This s the only printer on the network and is set as the default printer.

    Hello

    1 did you changes to the computer before the show?

    2. what operating system you have installed in the computer?

    The instructions will help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Method 1: Run the fixit:

    Diagnose and automatically fix problems printing and printer

    http://support.Microsoft.com/mats/printing_problems/

    Method 2: R the print spooler service and delete the print queue 

    Start the print spooler service in the Services console

    1. click on Start, clickrun, type services.mscand click OK.

    2. right click on the print spooler service and then clickstop.

    3. right click on the print spooler service and then clickStart.

    Start the spooler service for printing at the command prompt

    1. click on Start, clickrun, type cmdand then click OK.

    2 type the following commands at the command prompt:

    net stop spooler
    net start spooler
    Output

    Note: Press ENTER after each command line.

    Cancel printing

    http://Windows.Microsoft.com/en-us/Windows7/view-pause-or-cancel-printing

    Method 3: Follow the steps in the link:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 4: Delete and add the printer and then check.

    Add or remove a printer (Applicable for Windows 7)

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

  • Windows 8 - officejet 6000 - just stopped printing black-

    Windows 8 - officejet 6000 - just stopped printing black-

    put a new black cartridge in and now it will not print black - going to test the page and color printing - can hardly see black text on the test page - gray value - has always been - no other changes have had recourse to the same printer for a little over a year.  Only clean the print heads still no black printing.

    Hi rea123,

    I understand that you have an Officejet 6000, which is currently not print black ink. I'm sorry to hear what is happening, but I will do my best to help you.

    I suggest that you first look through this document for Troubleshooting print quality problems because it may be a few steps that you have not yet tried.  This document 'Print head problem' or "Print head seems to be missing or corrupt" Message appears on the computer has also a few steps to know how to clean the print head manually.

    If all else fails, take a look at the Bob_Headrick station for soaking your printhead.

    Hope this helps, have a nice day!

  • HP Officejet 6000 printest test page, but do not print anything else. How to print wireless?

    I reinstalled the printer.  It printed the page test perfectly, now I will not print anything else.  How to print again?

    Hello

    Welcome to the Windows 7 community!

    From your problem description, I understand that you can not print from HP Officejet 6000. I take this opportunity to help you.

    Let us perform the following troubleshooting methods and check that it helps to resolve the issue.

    Method 1: Run the printer Troubleshooter
    first of all, make sure that your printer is turned on and connected to your Windows computer according to the manufacturer's instructions. Then, try the printer troubleshooter, which will attempt to diagnose and solve your problem automatically.
    For more information, see the article below:
    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Method 2: Restart the Print Spooler Service
    You must be logged on as administrator to perform these steps.
    a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
    b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    c. right-click on the print spooler service and then click Properties.
    d. on the general tab, next to startup type, make sure that automatic is selected.
    e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Method 3: Configure the driver to correct the printer port
    on the tab "Ports" of the "Printer properties" window, select the port for the printer driver.
    a. from the Windows desktop, open the printer properties window.
    b. click the Ports tab.
    c. under "printing on the following ports; Select the port to which your printer is connected.
    Example: In this example, the printer is connected to the "USB001 virtual printer Port.
    d. click on 'Apply' to validate the changes.

    Click on general tab and then click on 'Print Page of Test' to confirm that the changes fixed the problem.

    You can also check out the links for more information.

    Printer problems in Windows: http://windows.microsoft.com/en-US/windows/help/printer-problems-in-windows

    For any further assistance, I suggest you to contact HP printer Support.

    Here is the link: http://www8.hp.com/us/en/support-drivers.html

    It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

    Kind regards!

  • Access panel back Officejet 6000

    I just bought an Officejet 6000 wireless printer.  It comes with a duplexer.  The standard Officejet 6000 printer is not equipped with a duplexer but only a lid with rollers at the rear of the printer.  I don't want to use the duplexer but it must cover (officially called a rear access panel).  I spent 2 + hours on the phone with HP tech support and service parts and they don't seem to know how I can get a.  Can anyone help?  Anyone know who to contact who can understand what I need and suggest how do I get one?  It is obviously not a 'standard' part, but as there was no I should be able to get a.

    any help would be appreciated.

    Thank you

    Jeff

    chpcrvr wrote:

    I just bought an Officejet 6000 wireless printer.  It comes with a duplexer.  The standard Officejet 6000 printer is not equipped with a duplexer but only a lid with rollers at the rear of the printer.  I don't want to use the duplexer but it must cover (officially called a rear access panel).  I spent 2 + hours on the phone with HP tech support and service parts and they don't seem to know how I can get a.  Can anyone help?  Anyone know who to contact who can understand what I need and suggest how do I get one?  It is obviously not a 'standard' part, but as there was no I should be able to get a.

    I can't imagine not wanting to use the duplexer, but the part you need is CB0507-6007 and illustrated here.

  • Toshiba Service Station falls down running on Satelite L50-C-1GX

    Hi all

    This week, we bought a Satelite L50-C-1GX and the Toshiba Service Station does not work. It opens well, but after we find any updates and you click 'Install', just freezes and cannot afford to be closed by something other than the Task Manager. Any ideas?

    Best,
    Linus

    Draw...?

  • What is the difference between the Service Station and Tempro?

    Searched for information on this, but have not been able to find:

    What is the difference between the Service Station and Tempro?

    I just run the wizard upgrade Toshiba and it installed the gas station but Tempro is already installed and seems to do the same.

    Concerning

    Bushy

    Hello

    These two tools are Toshiba one informs you of the new driver updates available on the Toshiba driver page.

    AFAIK Tempro is slightly older than the gas station.
    In addition the gas station seems to provide a bit more options and features like tool Tempro.
    However, I recommend using one my favorite utility's Service Station

  • Satellite L10 - B - Toshiba Service Station does not

    I have a Toshiba Satellite L10 - B with Windows 8.1, that I bought for my wife. Expiry of the additional phone support, and I need help.

    Since I bought the computer, I am wondering how to check updates from Toshiba. I finally found out there is a program called Toshiba Service Station that is supposed to automatically check for updates, but I've not yet seen this program, or notifications of him.

    I went looking for using the search function, and now I know where to find.

    Just today, I tried to manually check the updates of Toshiba using Toshiba Service Station, but it is coming up with an error message indicating that the program has not been initialized and I need to restart or reinstall the program. I tried to reinstall the program from the Web site, and I still get the same error message.

    Where to go from here?

    I currently have a different problem but with my Toshiba service station on my Toshiba laptop Satellite P70 - A laptop computer 8.1.

    I got when Windows 10 free update became available. Had improved to 10 Windows. I had some problems with my Toshiba since the upgrade. But I'll fix it in another thread.

    The problem I have is the Toshiba Service Station as well. I received an alert notification in the Notification Center of Toshiba Service Station. That there was some new updates to download and install. I opened the Toshiba Service Station. A click on the download button. Wait for the download progress bar of progress overall. But he did not download the download progress bar was not even download an update of size small file for one of the Intel drivers. I'm like waiting and waiting for the progress bar fill. But only see an inch of the bar filled. The update has more than 300 MB to download. My internet speed is fast. So I don't know what's taking so long to download.

    Please tell me what I need to do?

  • Toshiba service station - No server support

    No server upgrade... This is the situation of January so far!

    Can I do? Please see my attachment

    He gas station e da gennaio che non funziona. Sempre che vedete in hoist error... Chi mi Può help?

    WIN8.1 64-bit
    gas station 2.6.14.
    OK Internet
    Firwall ok
    OK antivirus

    the problem is the server of Toshiba?

    On my S50 Satellite - B, everything works fine and the download is possible. I don't know if there is some "global server" Connection Manager or there is a server for each country.

    I don't know if it will help, but try to reinstall the Toshiba service station.

    By the way: you have problems with your machine? I mean, is there a reason for the installation of updates?

  • Toshiba Service Station v2.6.13 vs MSI Wizard Toshiba Service

    Is - better Toshiba Service Station towards. 2.6.13 or MSI Wizard Toshiba Service Station last updated on 02.26.2015?
    Also why, if I remove the first in favour of the second, it will be impossible to put it back in the future?

    MSI Wizard Toshiba Service is not known to me but Toshiba Service Station is pre-installed on most Toshiba laptops and tablets, and this software informs you about new software and driver updates.

    This is a nice tool to keep the software up-to-date.
    So, I would not recommend remove this utility of the system.

    However, if you have already removed this utility, you are able to download this software on the site driver of Toshiba.

  • What is the Service Station?

    Hello

    Which is really the driver of Station Service?

    -check the updates of drivers or others?

    Thank you

    [TOSHIBA Service Station | http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-Service-Station/ta-p/346878]

    + This application allows your computer automatically search for the software updates TOSHIBA or other alerts from TOSHIBA that are specific to your computer system and its programs. If enabled, this application passes periodically to our servers a limited amount of system information required to perform these updates or alerts. +

  • Toshiba service station stop works on Vista 64

    I have Satellite A505, and the Toshiba service station stop working.
    I uninstalled the app and I replaced it for the latest version 2.1.33 and isn't problem solved.

    The service station message is "the Toshiba service station initialization failed. Try to restart or reinstall the application.
    Any suggestions to solve the problem?

    To be honest, I've never heard of this application and is perhaps a specific application of country/continent. I have the European model and we have a similar application called TEMPRO. This application runs in the background and informs the user of new updates or driver downloads.

    I don't know if this Toshiba service station is designed for the same purpose, but I can tell you with certainty that this application is not so important, and you can live without it. I have TEMPRO removed from the system. In my opinion, if you have this kind of problem with it, it deletes the system and the problem is solved.

    Can you please tell us for what is this necessary application?

  • OfficeJet 6000: OfficeJet 6000 does not print

    Replace the ink cartridges for Officejet 6000 would not print.  It prints the words Page Windows printer to test a test page of color with a printer icon in the upper right, then at the center of page 4 with a white fill boxes; yellow fill, blue fill and a red fill.  That's all.  I touched a "print test page" and the paper comes out blank, although that normally shake it like the print head moves back.

    Hello @Pistol_shooter, greetings!

    Thank you access the Forums from HP Support for extra support! I see that you are having problems printing using the Officejet 6000. I will do my best to help you with this problem.

    I suggest you first check the empty ink to ensure it is enough ink. Then proceed to clean the print head using the software installed on your computer. Since your computer desktop, double-click the printer icon, the printer wizard / solution Center will open. Go to settings and navigate to the cleaning of the printheads.

    I found a wonderful document that gives you instructions step by step to solve this problem. Please visit: http://hp.care/2dtFaXe

    Please let me know if that solves the problem. Good luck!

    See you soon

    Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

Maybe you are looking for

  • Preview.app freezes dock and command + tab

    Everytime I open the Preview.app it completely freezes the tab dock and order for a few minutes. I can switch between applications using the mouse and launch applications using spotlight search. But I can't control the dock or use the command + tab.

  • How can I get Firefox to open links in a new tab with Outlook 2010

    I tried almost everything and when I click on a link, it opens in the last tab, I used. Any suggestions?

  • Static IP address of WiFi requires the DNS server

    I was able to confirm this on two separate MacBook Pro (various models) the two Yosemite running 10.11.4. After assigning a static IP address to the wireless network interface, the MacBook ping to a address beyond the gateway by default unless there

  • How to format an old drive hard second with XP OS on it?

    I upgraded my PC from XP to Windows 7. I have 3 HARD disk attached to the motherboard. However I forgot to disconnect all HARD drive I want to install Win7 on when I started the installation, Windows 7 has been installed on a HARD drive that had no o

  • HP Envy 120: Replacement of printhead HP Envy 120

    My two computers are connected wirelessly to my HP Envy 120.  A computer runs on Windows 7, the other on Windows 10. Because I have tried all the advice for my problem: the printer cannot print black ink - I'm now looking to replace the printhead bef