OfficeJet 6100 prints photos but print the electronic text as truncated including title, date/time?

Similar Questions

• There is text on my photo, but there is no text layer in the layers panel. What is everything?

  There is text on my photo, but there is no text layer in the layers panel. What is everything?

  Hi juliannz,

  The layers panel will contain the text only if you have saved the original under a PSD file.

  If it was saved as a jpeg, png, it not the layers.

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• Printer HP Officejet 6100 (h611a) can not find the WiFi network

  My printer HP Officejet 6100 has recently lost its eprint connection and would not reconnect.  I asked for help and told

  try to use an IP address manually.  I tried this according to the instructions provided to me for the manual IP address, subnet mask and so on.  I selected apply.

  The restarted printer and now the printer cannot be found or will not connect to my

  wireless network.

  I tried to power on the printer, the modem and the router so that it would reset but the printer would not still find or connect to the wireless network.  The little blue light on the printer for wireless connection just continues to blink.

  Because it connects to the wireless network I can not go back in the server web part to cancel the IP address manually and other changes.

  Is there a way I can reset this?  Or get my printer to connect to the wireless network.

  Steve

  Hi scthom,

  Welcome to the Forums of HP Support! I see your HP Officejet 6100 has recently lost its connection ePrint, and now, you are not able to get connected to your wireless home network. I would like you to follow the steps below:

  Please start here: convert from a connected printer USB wireless

  You are now connected to your wireless network? Please let me know the results, I'll watch for your reply.

  Thank you

• HP officejet pro 8600 more random print the unreadable text

  Hello

  I have a problem with a newly acquired HP officejet pro 8600 N911g. When you print the document, some pages are filled with unreadable text instead of the original text (e.g. ' eft! bdujtop! dpssf-wcy TPQ! QSF"). It happens whenever I have print the same document, and sometimes on a few lines of certain pages.

  When the same issue occur on the same page, that's exactly the same gibberish (so it isn't random text).

  Here is an example of an impression goes wrong in the middle of a page.

  The printer is plugged in and the PC is wireless.

  I tried to launch HP print and scan of the doctor, he did not find any problem.

  He tried to print with another PC, same problem happened. My OS is Windows XP with SP2 32 b.

  The printer model number is N911g, the product number is CM750A and the number is 22241.

  Any advice would be helpful.

  Thanks in advance.

  Normally, this means that there is a problem with the radio wireless on the router. It may work fine for everything else for now, but it could be losing signal slowly, that would not be noticed by most of the things until the signal was almost gone. Signals of printing and scanning signal, for some strange reason, I've never even had explained to me, get back on it lose everything first and suffer the worst. I try to search for the firmware updates that may be available for your router, as it may just be a firmware issue that causes a light signal lose. If that does not resolve the problem, I would look in get a new wireless router.

• HP Officejet 7610: Print the task remains stuck in the queue

  I want to install a 7610 Deskjet to print via WiFi on my home network to a windows PC 10.

  It prints pages test locally, and the computer (preferences Print - print a Test Page).

  It still prints the first document, but that the document never leaves the print queue. His status will be 'print' and sometimes size will show that all the file has been sent (e.g. 123/123 MB and sometimes it will show almost all has been sent (for example 120 MB / 123 MB).)

  The doctor Print (v4.9) downloaded and installed: HPSupportSolutionsFramework - 12.5.26.37.exe. The print doctor always reports "Print queue problem solved" and remove the blocked entrance. I can clear the error by deleting files to print that and restart the print spooler service. However it only lets me exactly a document more having to restart the print spooler.

  Tried to use an other PC Win10, same symptoms

  Printing a small text file or print a Page of Test works, but any file to print several pages fails. A tried. PDF. Docx, Web page of the Chrome or edge and all fail.

  Help?

  -Jeff

  Did you check the firmware of the printer? (Link to firmware HP)

• HP officejet 5745: print the computer screen

  I can't print the information on the web.  When I select the option print on the computer page or highlight a section of the Web page for printing, I go to the printing option (which shows the 5745 as the selected printer), select "Print", but nothing happens.

  Can you print from Notepad or other programs?  If this isn't the case, run the http://www.hp.com/go/tools diagnostics can help solve the problem.

  If you can print from other programs, please mention which browser you are trying to print from.

• Resize the photo but not the vector mask?

  If I use a vector for a picture of drawing as a mask, can I then change the picture and hide individually?

  There is a point in the center of the photo which allows me to move the mask, but how can I resize the photo without resizing the mask and resize the mask without resizing the photo?

  Thank you

  Hold down the Alt/Option + click this point blue Center to move/adjust the mask without worrying if the thumbnail of the layer is active.

  Regarding resizing regardless of them, I'm not aware of all the shortcuts except for:

  Decouple (click/enable/disable the link between the thumbnail of the layer and the mask thumbnail)

  Select the thumbnail of the mask.

  Change the values (W/H) in the PI. (You can also do the same thing here for the active layer thumbnail)

  Here is a tip that I use a lot of the time:

  Use AutoShapes like masks. It is those who have points in the canvas "controller" that allow to resize, change the angles etc.

  Example:

  A. open/import an image file.

  B. Edit > cut the image/bitmap to the Clipboard.

  C. adding a Rectangle object rounded on the Web and have it active before moving on to the next step.

  D. Edit > paste inside the contents of the Clipboard (the image).

  The result is your image with the a vector mask was consistent with the auto shape (in this case, the rounded Rectangle).

  That's the problem - select the vector mask thumbnail and you will see again "anchor controllers" there: resize and corner radius.

  h

• Customize the filter/search text, but display the original text of the research to adf 12.1.3

  After customization of search in the QueryFilterBean text, how always display the original text entered by the user if the results of the table appear.

  It is in the ADF 12.1.3 version. Is this possible?

  You introduce new variables to filter for the entrance of users as is described in this blog https://tompeez.wordpress.com/2015/04/11/how-to-filter-adf-bound-tables-by-date-range-jdeveloper-12-1-x/

  Then read the values of variables in the onQueryListener in your bean method that you introduced in the filter and apply both in terms of filter criteria.

  Timo

• can I get the full text of sql from aud$ data table

  Hi gems... good afternoon...
  
  We try to understand the name of the tables and actions associated with their subject (select, insert, update, delete) what we will do with our application.
  So I enabled the audit parameter audit_trail = db, extended. After that I can get the records required of the dba_audit_trail_view by the following query:
  

  select d.entryid, d.timestamp, d.obj_name, d.action_name, d.sql_text
  from dba_audit_trail d 
  where d.username='TEST_SCHEMA'
  and d.obj_name not like '%$%'
  and d.obj_name not in ('_CURRENT_EDITION_OBJ','ALL_OBJECTS','_ACTUAL_EDITION_OBJ','ALL_SYNONYMS','_ALL_SYNONYMS_TREE',
  '_ALL_SYNONYMS_FOR_AUTH_OBJECTS','_ALL_SYNONYMS_FOR_SYNONYMS','ALL_SYNONYMS','DBA_SYNONYMS','PLSQLDEV_AUTHORIZATION',
  'USER_OBJECTS','_ALL_SYNONYMS_FOR_AUTH_OBJECTS','DUAL','_BASE_USER','ALL_TAB_COLUMNS','ALL_COL_COMMENTS','ALL_TAB_COLS',
  'NLS_DATABASE_PARAMETERS','ALL_SOURCE','ALL_ERRORS')
  order by d.timestamp desc;

  I'm satisfactory output by that. But the problem is that some of the requests in hibernation is too large (maybe 10000 characters... "I'm not sure), these queries do not come completely. This is why I don't get some important information such as the WHERE the FROM clause condition, etc.
  There is no sql_id column in the table of $ aud.
  
  Is it possible to get the full text of sql... Please help...

  for this view sql_text column is different... try column sql_text a60000 and answer format which is the result

• HP officejet 6000 prints the alignment page after each print job

  HP officejet 6000 cb051

  Vista 32

  a technician had me remove and then reinstall the driver, I thought it helped, but it didn't so I reinstalled the driver from the web page and that did not help either

  My printer prints an alignment page after each print job.

  I used my call free support to resolve this issue, and I thought it was fixed, but it isn't.  I checked the manual and there is no information there.  I have no idea what to do next.  Someone at - it any help?

  Susana

  susana1027

  The alignment page will print until it completes successfully.  Try print a page of diagnosis as on the Six Solution on this page. Do all color printers correctly?  The alignment will fail if the parties in black and color do not print correctly.

• Printer all-in-one Officejet J6480 prints the document leaves "error sent to printer" message in what.

  I have an officejet 6480 connected wireless that I print from a connected computer eithernet running Windows 8. When I print a document from various (Notepad, adobe, outrlook, etc.), the document print OK, but I find myself with a message in Quebec under the State that says "error - sent to the printer. 8/2 is listed under pagesand I print a two-page document. I ran HPSSdr and it shows errors found and it erases Quebec, but the next time that I print, I have the same problem. The printer is connected to an Actiontec PK5000 without wire/eithernet DSL modem/router. It's a router securred with a WEP password. When I do a test print from the HP software it erases OK, but she let the other message in the what. I also ran SFC/scannow, which did not find any problem.

  The problem seems to have corrected itself. I did a system restore to before the updates required and still had the problem. I reinstalled the updates that have been deleted and the problem seems to have disappeared. I had to turn and then turn the WiFi printers because I received a message to unavailable printer. After all what it seems to work now.

• OfficeJet 6100 printer squeaks.

  My printer is about 1 year old, and when the paper is transported, the printer makes a grinding noise.

  Hello William16and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having problems printing.  I would try to help.

  I recommend you to perform a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Then I suggest you the rest of this paper on a message "erase the transport Jam and press ENTER to continue" on the all-in-one.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Cannot print the added text box

  When I add a text box to an existing pdf document and save the file (with Acrobat X Pro), the text box does not print or appear on the preview (for a printer HP or Acrobat) Panel.  I can print successfully from the text box in the pdf file saved using Adobe Reader.  Any ideas about what could prevent Acrobat X Pro to print this text box reader finds (and prints) without effort?

  In the print dialog box, select Document and markup under Forms & comments rolling. It is just above the Preview Panel. Then it should work...

  Feel free to post back the results.

• I have LR5. On the left column catalog / all photographs I 11557 photos but on the band said: all photographs 9492 11557 pictures. Where can I find these photos of 2065 missing?

  On my Lr5 on lefhand Panel stays: all photographs 11557. The band stays downstairs: all 9492 11557 photos photographs. Where can I find these photos of 2065 missing?

  You have 2065 photos that are in the stacks that have been grouped, which means that these images are not currently visible in "All photographs".

  You can use ' stacking > expand all stacks for all open them if you want them to be visible.

  M