OfficeJet 7410 & WPA2

Similar Questions

• My Officejet 7410 will not longer accept WPA2 network access

  My Officejet 7410 will not longer accept WPA2 network access. He's always worked with WPA2, but after using the temporary printer with USB attached the printer wouldn't connect more after unplugging the USB. The only way to connect wirelessly is using WPA. What is the cause of this problem who can and how can it be resolved?

  Well, since you can't access your router to make changes, the only thing I can say now is take the device to a friends house and attempt to connect to access to the router for the tests.

• OfficeJet 7410 wireless configuration

  I have an OfficeJet 7410 all in one on a Windows 7 system.  I want to print wireless from my laptop to the printer.  I installed drivers and can print when connected but don't know how to print wireless.  Specific help would be greatly appreciated

  The printer should accept WPA but not WPA2 and it may not even accept WPA/WPA2 mixed mode.

• OfficeJet 7410 will not log on to the network because I can't change the security from WEP to WPA 2 Protocol

  I have a Mac powerbook G4 running OS 10.4.11 and a Wireless N Router with WPA 2 security protection extreme Apple.  My Officejet 7410 has suddenly lost its ability to join the network.

  Whenever I try to run the Wireless Setup Wizard on the 7410, it detects my network as a network available to join, but then asks me to enter a WEP password.  I get my password, the rotation of the gears on the screen of the printer for a minute or two, and then it displays that it is unable to join the network.

  Since the extreme Apple uses WPA 2 security protocols, is the reason why the printer is not able to join the network because of his attempts to use WEP protocols?  I did a complete reset of Semi and then a full Reset, nothing helps.  I also tried selecting the option 'restore factory settings' menu without success.

  I am able to connect to the printer using a USB cable, but the reason I bought it in the first place was because of the freedom of its wifi capabilities.

  Any suggestions?

  My suggestions were a few ways to tell your printer on the network.  They are temporary connections used for this communication, and then are disconnected.  After this would connect you to your printer on your wireless network.

  I think I know the problem: after reading the manual (new) it is specifically stated that this printer supports WPA but not WPA2. So make sure your airport the most practical (and Express) are set to WPA/WPA2 Personal utility Airport (not WPA2 Personal).

  Your printer is probably the check on Airport Extreme and not the Express, so the Express in bridged mode is fine - you want only a DHCP service on your network, so looks like it is set up correctly.

• Install OfficeJet 8600 with OfficeJet 7410

  I use a current version of Windows 7, SP1.  Can I install an OfficeJet 8600 on the same computer that also uses an OfficeJet 7410? It seems that when I install the software 8600, it trashes the 7410 installation.

  Both printers have coexisted on my laptop Dell for ten days it seems that the problem has been resolved by uninstalling them both, and then reinstall the 7410 has my work, followed by a relocation of the 8600 at my house using the software downloaded from HP instead of the software from the installation of 8600 disc.  The 8600 without the 7410 was also stable on installing MacBook Pro Bootcamp to my wife for the same period.  Thanks for your help.

• Is it possible to use the wizard to analysis of Microsoft with all-in-one HP Officejet 7410?

  I have a HP Officejet 7410 connected to my system and it works well had to analyze the documents, that I prefer software that comes in the accessories of Windows XP. Naturally, the HP software overrides this facility and the scanner is not seen. Is it possible to make visible in the Microsoft program?

  Thanks for your suggestions.

  If the printer is connected by USB cable, you should find the scanner icon in the control panel > Scanners and cameras. If you double-click on the icon of the scanner, it should start the wizard for scanning.

• OfficeJet 7410: officejet 7410

  I bought two ink cartridges at the Denmark (HP 344 and HP339) for my HP Officejet 7410, on cards, it is mentioned that they are suitable for my printer. However, during installation, I received a message that they are not "compatible" with my printer.

  I understand that there could be a problem from one area to another?, in this regard, please note that I am currently resident in the Venezuela, which is also where the printer was initially purchased.

  I checked the warranty with HP, but it expired

  How to solve this problem?

  Welcome to the HP community @Hawkeye1,

  I came across your post about the use of cartridges for your Officejet 7410 in a different region that the printer was bought in. In your particular situation, a discount to zero 'regionalisation' will be made on your HP printer directly, so that the printer accepts the cartridges you are trying to use.

  Contact HP by following these steps. If you have problems with to join to do the reset, please let me know!

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

   

• Unable to install the solution on Officejet 7410 Center.

  Windows 8 with all-in-one Officejet 7410.  Print wireless, but cannot scan.  I downloaded the latest version of the software.  What Solution Center to open I get "cannot run because the device is not over.

  I tried loading CD but windows 8 can not "run as.."

  Thanks for any help.

  Hi Raindrop211 and welcome to the forums of HP!

  I'm sorry to hear you had problems with the solution Center HP regarding your Officejet 7410, but I will certainly do my best to help out

  It really looks like that something is not to proceed with the installation correctly, so to start I would like that you start by removing the software HP using HP Officejet software and driver removal utility and then once it is removed, I would like to you clear your Temp folder as well.

  Once this is done, I would recommend that you reboot your PC and then go to download and run the HP printer installation wizard as it should be able to download and install the most recent drivers for you.

  I would like to know how it goes for you!

• All-in-one HP Officejet 7410: your printer cannot be found on your wireless network

  I have a home network and two printers connected wirelessly. One is HP Laserjet P1102w and works very well. The other is all-in-one HP Officejet 7410 and I am not able to connect to it. I installed the HP software, but it fails to detect the printer. It was working fine before the update from Windows 8.1 for Windows 10.

  I am able to ping the printer IP. If I enter the IP address on my browser I see the printer (see photo below) and it let me scan (see photo display preview).  But I could not find where to go the scan! It is not in my scans.

  I ran HP print and Scan doctor and it shows the HP Officejet 7400 series. When I select and press Next, it says: failed to communicate with your selected product. I noticed that the IP address is slightly different from the actual IP address that has the format: xx.x.x.xx. Than that shown is xx.x.xxx. Which ' don't know if it's part of the problem.

  Any help would be appreciated. Thank you.

  

  

  Hello

  If you still experience this issue, download and install the following software and check to see if that can help you:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Shlomi

• OfficeJet 7410 Driver Install on Windows Mobile 8.1

  I'm trying to install the HP OfficeJet 7410 all-in-one printer driver.   I downloaded the HP Printer Wizard, the printer has detected and started the installation.    I also ran printing HP and doctor scan which has also detected the printer (in a network) and started the installation.   These two tools, download and run the installation package AIO_CDA_FSW_Full_Win_WW_140_408-5.   This is the process fails.   The software is installed, and then seeks to determine the printer - my printer is connected to the network via ethernet.   When the software does not find the printer, I restart the scan, it fails.  Finally, I wonder if I want to enter the IP (192.168.0.102), and I re - search for the printer.  Saying the direct IP address software does not work, he doesn't know how to find the printer.   I can ping, I can access the printer web page, the PC can connect to the printer and find, the installation of driver software does not work.   To reconfigure the printer and the laptop to use it wireless to repeat the search - always the software can't find the printer, so do not install the print driver or the installation of the software.   If I run the HP Solution Center, it will fail, telling me to set up the printer.   I went through this process as well - he too fails to find the printer.

  How can I get the software to recognize the printer so that the installation may complete and I can use the scanner/printer/etc. ?

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  Please let me know how it goes,

  Shlomi

• HP Officejet 7612: Replacement HP Officejet 7410 all in one HP Officejet 7612 e-all-in-one

  I have currently a HP Officejet 7410 all-in-one which includes the program Solution Center, I bought a HP 7612 Officejet 7612 e-all-in-one. Do I need to uninstall first the 7410 HP? The HP 7612 aura the program Solution on the installion also CD? I need a program that tells my computer when I'm scanning to save JPEG files in my computert.

  I also have a HP Photosmart 8050 installed which is my primary printer.

  Which of the following programs do I need to uninstall related to the HP 7410?

  HP Photosmart, Officejet and Deskjet All - In - One Driver Software 13.0 rel. B

  13.0 HP solutions Center

  HP Smartweb printing 4.51

  HP Photosmart Essential 3.5

  Program HP Customer Participation 13.0

  Imaging of the functions of the unit 13.0 HP

  HP update

  I don't want to uninstall whatever it is that might interfere with my active 8050 printer and driver

  The Hp uninstaller States "if I have multiple HD devices choose to uninstall all HP products associated with this device" will affect some of the other printing imaging devices or it asks to choose programs to uninstall.

• Need advice on the installation of the driver (Generac monitor pnp) officejet 7410

  Hello I have an Officejet 7410 MFP, Win7 Home Premium 32-bit and a 32 bit IE9. I have a third-party driver updater (Driver Boost) I did a scan for new drivers and installed all the drivers except the drivers OJ7400. . These 2 drivers are generic pnp monitor that have a different icon for my HP officejet 7400 series. Boost driver support said I should install all updates. However, I request support here because I am wary of a pilot who is not associated with my officejet 7410 icom. Please provide recommendations related to this issue. Thank you.

  Hello

  You can download the drivers for your printer below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76971-1&cc=us&DLC=en&LC=en&OS=4062&product=391194&sw_lang=

  Proior start the installation, be sure to unplug the USB and restart the PC, and then start the installation. You will be guided to connect the USB cable during the installation process.

  Kind regards

  Shlomi

• HP OfficeJet 7410 connect wirelessly to a wireless computer

  I have a HP OfficeJet 7410, which seems to work if the computer or printer is conncected to the network by an ethernet cable.  If both are wireless, the printer cannot be seen from the computer.  Any help will be greatly appreciated.

  Thanks in advance,

  John Novak

  What router?  You can get in its settings? If so, search for "Isolation wireless" or just "insulation" and disable it.  This setting blocks communication between customers Wi-wired and on the router.

• Fax/scan without a phone with officejet 7410 all-in-one line

  I have an officejet 7410 all-in-one and UNPLUGGED my phone line at home. How to download software in order to fax/scan items? I get the message error is "you must install or run HP software for this feature.

  Here is a link that will help you with that.

  http://WWW8.HP.com/us/en/support-drivers.html

  1. Enter the name of your printer DRIVERS AND SOFTWARE

  2. choose your operating system

  3. then, when he asked to SELECT A DOWNLOAD, choose the software FULL of FEATURES.

  Let me know if this can help, thank you.

• OfficeJet 7410 pilot lost after 3 days on the Vista operating system

  I'm on a Vista operating system with an Officejet 7410 printer connected to a network using a Linksys router. About every 3 to 5 days, the printer disappears from the Vista computer and I again to load the driver anywhere.

  Any thoughts?

  Check the updates on this page.