OfficeJet J4680: Officejet J4680 ghosts and print at an angle

Similar Questions

• HP Officejet 4632: Scanning and printing photos

  How many pages it can scan simultaneously? Is there a certain type of photo paper that should be used with this printer?

  Hi @Faye24,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you have questions about scan using your HP Officejet 4632 e-all-in-one printer and photo paper. I would like to help.

  There are two ways to analyze, either starting from the glass tray, or by using the automatic Feeder (ADF) of Document.

  You can scan pages as much as you want. The ADF has a capacity of 50 sheets, so able to load 50 pages up there, if you had to.

  The big glass dish limits you to a single page at a time, but when you scan with the HP software it is a button that allows you to scan and create a multiple page PDF when scanning of the bucket.

  If you need assistance with the analysis please let me know what what operating system your computer is running so I can provide the appropriate documentation.

  When it comes to photo paper, photo paper sizes supported and weight.

  

  HP recommends using HP photo for best results of printing paper. You can click here to see the photo paper HP is available.

  Please let me know if that solves the problem, or if you need assistance.

• HP Officejet Pro L7590 and printing software Mac Yosemite 10.10

  I installed my Mac to a mew 2014 MacBook Pro with the retina and Yosemite 10.10.1.

  I want to install my old HP Officejet Pro L7590. I have the printer connected by network cable to my Comcast network hub. There is a stable connection on both ends (the lights are on). What software download to install the printer? Is it not available for Yosemite yet? Where is it located? I guess that its not available to Yosemite yet? I don't have the original software. Thank you.

  Hi @rustyblue,

  Welcome to the HP Forums!

  Currently, it there is no full software features and drivers directly through HP for Mac OS X 10.10 for this printer model. However, after some research, I found this driver directly by Apple. HP v3.0 for OS X printer drivers.

  If you need help with scanning without HP software, please see this post, Re: iMac OS X 10.9.3 scan driver for HP OfficeJet Pro 8500 a A910a to iMac doesn't seem to be, by my colleague @Sunshyn2005. Even though this post is for Mac OS X 10.9.3 and another printer, these steps will work on 10.10 as well for your printer.

  I hope that helps you get up and running, please let me know if you have any additional questions!

• How to connect a HP officejet 4500, Fax and copier and scanner 3 in 1 for my pc?

  I have a new computer, windows and a 3 in 1 HP officejet fax, scan and print.  How can I connect it to the fax. I have a modem xfinity and his hook up correctly (I think)

  Monday, October 1, 2012 17:31:54 + 0000, Sheba33 wrote:

  I have a new computer, windows and a 3 in 1 HP officejet fax, scan and print.  How can I connect it to the fax. I have a modem xfinity and his hook up correctly (I think)

  It's hanging in wrongly. Your Xfinity (Comcast?) modem is connected to the
  connection to the internet from your cable provider. You cannot send a fax to the
  the cable line. The fax must be connected to your phone of the voice
  line.

  Ken Blake, Microsoft MVP

• HP officejet J4680 does not print to web

  I have an officejet J4680 which does not print web pages, it prints everything else as of the word, but it will not print from the internet. I have the windows operating system 7. If anyone knows why it's hapenning let me know, thanks

  I'm sorry you have a problem of internet printing.

  Try to open another browser and printer. (Firefox, Google Chrome, etc.).

  Alternatively, you can try to restart the computer and see if it works later.

• OfficeJet Pro 8600. Printing a list of todo in black and white

  I have the OfficeJet Pro 8600 more and I use an iMac, OS 10.92.

  I want to print a list of Todo comics in black and white rather than in color. (This is a todo list [i.e. Gaston ToDo] available in the applications in the HPePrintCenter).

  I don't see a setting that allows me to set a preference to black and white.

  Suggestions, please.

  Thank you.

  Lynn

  Hello lovemutts,

  Thank you for being a member of the HP support forums.  I see you want to learn more about the print settings with one of printing applications to which you are subscribed.

  I've included the document Getting Started with Print Apps and at the request of delivery print Apps .  In the section titled "Managed print Apps" is a sub-section titled 'print settings.  In there, it says "On some printers connected to the web, a settings option is available on the screen of the print Apps Print Preview mode that provides options to select the type of paper and print quality."  If the application you are using does not offer this option so that you will not be able to change all the predefined print settings.

• OfficeJet 5746: Why my printer does not record twice in devices and printers (direction)?

  My HP Officejet 5743 presents itself as the default printer.  Also the appearance is HP649F6A (series HP Officejet 5740).  Why it appears twice with different BOMs?  Will it affect anything if I remove it?

  Hi @Metal1,

  Thanks for joining the Forums of HP Support with your request.

  I understand that you use a HP Officejet 5743 e-all-in-one printer with a Windows 10 PC and printer appears twice in the file devices and printers in Windows, with slightly different names. I would like to help with that.

  I was looking into this and found that there is a solution, concerning Direct eventually picked up by your PC if directly on wireless wireless signal the printer is 'On '.  Try the post with the answer of the @vthapa by clicking here.

  Please let me know if that solves the problem, or if you need assistance.

• HP OfficeJet 4650: HP OfficeJet 4650 does not print web pages: print from Word etc very well. Using Firefox and Windows 7

  HP OfficeJet 4650 does not print web pages: print from Word etc very well.  Using Firefox and Windows 7

  Œuvres of chrome!  Does this mean I have to give up Firefox?

  Thank you!!!

• HP Officejet 7000 - biased and slanted printing

  HP Officejet 7000 wide format printer (A3 and A4)

  Operating system: Windows 7 (32 bit)

  We use this printer for 6 months without any problems for our SMEs.

  Recently we have had problems with the print quality.

  A3 prints are spread between 2.5 to 3 inches.

  I have changed all the print cartridges, run the HP software to re - align the cartridges and clean the printheads several times.

  The paper adjustment arm is ok and his training online right.

  I checked the rear access panel and it is fixed properly.

  We use only one type of paper - a lightweight conqueror.

  We print mainly table A3 with her plans.

  Mainly use us MS publisher, Illustrator, but also print PDFS as well.

  We do the photos printed with this printer - text for graphic images.

  The printer has no intensive use - we have another HP laserjet for the majority of the other the methoeds.

  I think that the printer has a harware issue.

  Any advice or help would be appreciated.

  Here's a link below which may help you with this problem.

  http://goo.GL/tn9PG

  Let me know if this can help, thank you.

• OfficeJet Pro 8600 - How do I 'create and print a copy to one side of a duplex ID '?

  How do I "Create and print a copy to one side of a duplex ID" which is advertised as a feature in the commercial documentation for HP OfficeJet Pro 8600?

  I read the community forums help and documentation of the printer without result.   Any help would be appreciated.

  simple.
  1. press on copy
  2. click on settings
  3. click on 'Copy ID' and select 'on '.
  4 OK

• HP Officejet Pro 8600 Plus: printing and scanning option is not presented when one clicks on destop icon for HP printer

  When I click on the HP printer on the desktop icon, it does not open the usual window for all functions of the printer.  I just get a notification asking if I want to leave the program to make changes to my pc.  Also, when I click on the option of printing a pdf document, the print window that opens only allows me to "Save" the document not printi TI (the 'save' button is substituted for the 'print' button).  Can I save the document and print then after I opened from my windowssaved file, if the printer is working and will analyze in the screen of the printer associated with the.  This is done via the wireless connection, so it works.

  Hello

  Try following the steps listed below and check if it can help, the steps for Windows 8 is also applicable for Windows 10:

  http://support.HP.com/in-en/document/c03640384

  If this does not help, try following the "printer software installation & screen opens instead of HP printer Assistant" section below:

  http://support.HP.com/us-en/product/HP-OfficeJet-4630-e-all-in-one-printer-series/5305049/model/5305050/document/c04714314/

  About the "print" button, I guess that's not related wit the real software problem:

  Google chrome opens the print dialog box, and then press the button change.
  Select your printer from the list instead of the default save as PDF option and try to print again.

  Shlomi

• HP Officejet all-in - One Printer series - L511 Mobile 150... Problem Bluetooth and Windows 8

  Hello

  I have a Mobile of 150 Officejet and I can't connect to my laptop via bluetooth. The laptop that I use is a HP M6-1117TX which has the bluetooth function. It works on Windows 8, 64-bit.

  When I tried to install via the CD nothing happened. The installation screen appears, but there is no button install, just an exit button. From there, I downloaded the software and the drivers from the HP website. This installed OK, but after installing I can not connect to the printer and the computer tells me that there is no driver for the printer. The bluetooth is enabled on both devices.

  I was able to connect and print via the USB using the HP installation wizard

  Question: Why the computer won't recognize a driver for bluetooth? If it not is not how it?

  Hi Anthony999,

  Follow the steps outlined in the document below to install this printer via Bluetooth.

  Installation and printing with a Bluetooth network connection

• 8600 officejet pro to only print in black and white only

  How can I configure my 8600 officejet pro to only print in black and white automatically so I don't have to authorize whenever I print?

  Hi Andrewbono,

  You're welcome, I'm glad we were able to fix everything together!

  If you feel that one of my suggestions brought you a solution please feel free to mark it as an acceptable Solution to facilitate advice for others to find.

  Whatever it is, it was a pleasure to work with you and wish you a great week

• 5740 e: I just bought a HP Officejet 5740 e and are unable to print

  The printer is connected to the network.  When I go to print, it shows the document I want to print but then disappears in about 15 seconds and prints ever.  Any ideas?

  Thank you

  Steve

  You will need to grant full access to the application subsystem spooler and listing the ports used by the Windows file sharing service.

  You should check the McAfee web site on how to do this as there may be other options.

• HP Officejet Pro 8610 and G62: both computer HP laptop and printer do not work not today

  Last night, the printer stopped working and posted message indicating its ' in offline mode. Then this morning, impossible to download the documents on HP G62 online and offline to send. I had changed my Windows 10 OS two months ago, but so far had not experienced any problems. Please help as soon as possible!

  Sincerely,

  Wanda Thompson

  I think that your connection Internet/WiFi connection can be a problem causing your PC to lose internet connectivity and printer to establish a connection with your PC.

  Try to restart your internet modem and see if that helps.

  Its always good contact also your Internet service provided.