OfficeJet Pro 8610: No desktop Windows 7 printing and Officejet Pro 8610

Similar Questions

• "" Just had something appear on my desktop - Windows XP Professional "' and that 'Build' is stated below. Cannot move and would be just as quickly get rid of it. One

  "" Just had something appear on my desktop - Windows XP Professional "' and that 'Build' is stated below.  It is in the lower right corner and watch whatever I chose.  Cannot move and would be just as quickly get rid of it.  Don't know how it got there.  Any help would be great!

  ALL TAKEN CARE OF-FOUND THE ANSWER AFTER HAVING POSTED THE QUESTION

  Hello

  I suggest that you check whether the version of Windows XP installed on the computer is enabled or not.

  Check out the link provided below for more information

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890

• Problems faxes sent using Windows - Windows XP - Windows XP printing and fax

  I have Windows Fax properly installed under Windows XP SP3 with Aztech SoftK56 Data Fax PCI Modem (manufacturer CXT).  The modem receives incoming faxes, but does not send.  The Fax Console States that there is 'No response' to fax numbers that were entered correctly and I first rang just to check if they are indeed the fax number and if they work. This has been attempted without dialing rules, as well as the rules of composition and is still a problem.
   
  Fax numbers that I tried to send to are of the format: -.

  1 020-7833-nnnn 2.  020-07380-nnnnnn 3.  01324 - nnnnnn

   
  NB. an attempt was when the Fax Console has awarded occupied status "line".  It was too fake I think.
   
  Device Manager indicates that the Fax Modem works properly.  I agree completely with this.
   
  The Fax Modem receives incoming messages that suggest that the Modem is compatible with Windows Fax under Windows XP SP3 and I should also be able to send messages using Windows Fax.
   
  Have you the XP community and other suggestions?
   
  Problems with faxing using Windows Fax in Windows XP seems to have been a problem for a number of people.  However, there is no published statement of a solution that I can find.

  I have Windows Fax properly installed under Windows XP SP3 with Aztech SoftK56 Data Fax PCI Modem (manufacturer CXT).  The modem receives incoming faxes, but does not send.  The Fax Console States that there is 'No response' to fax numbers that were entered correctly and I first rang just to check if they are indeed the fax number and if they work. This has been attempted without dialing rules, as well as the rules of composition and is still a problem.

   

  Fax numbers that I tried to send to are of the format: -.

  1 020-7833-nnnn 2.  020-07380-nnnnnn 3.  01324 - nnnnnn

   

  NB. an attempt was when the Fax Console has awarded occupied status "line".  It was too fake I think.

   

  Device Manager indicates that the Fax Modem works properly.  I agree completely with this.

   

  The Fax Modem receives incoming messages that suggest that the Modem is compatible with Windows Fax under Windows XP SP3 and I should also be able to send messages using Windows Fax.

   

  Have you the XP community and other suggestions?

   

  Problems with faxing using Windows Fax in Windows XP seems to have been a problem for a number of people.  However, there is no published statement of a solution that I can find.

  Fax services Windows XP is not a very robust application.  The usual answer to questions such as yours is, "If the modem is not on the compatibility list hardware Windows XP, then it probably won't work with Services of Fax XP."  The problem with such a response is that the XP HCL (or whatever Microsoft changed its name to) is no longer available, and even if that were the case, you probably couldn't find one of the modems listed to sell more.

  Your phone numbers are clearly not to the United States.  In the United Kingdom perhaps?  If you are using dialing rules, so the number called and the call number must be included in the 'canonical form'http://support.microsoft.com/kb/318575/

  With the American numbers, this means that they would look like this: + 1 (202) 456-1414 (standard White House). If you call a London phone number, it could be something like this: + 44 (020) 7782-5000 (Sunday Times).

  I'm sure that you must sign, almost certainly you need parentheses and don't know the spaces and dashes. For this reason, I don't usually use dialing rules.

  When you leave the area for numbering rules uncontrolled, you must enter the phone number EXACTLY as you would if you were composing a normal phone using the line to which the modem is connected.

  Try to send a fax to your phone (mobile or not, it is not serious).  Is called ringtone? When answer you, you hear fax tones?

  Based on your answers to the above, we can (or cannot) be able to move forward in order to diagnose your problem.

• Windows 7 printer and HP1120c using gigaware usb, a parallel printer cable is not recognized by plug-and-play

  I can't get my printer recognized by plug-and-play.  I have installed a printer manually, but still can not get to work.  All boards

  Hello Kirk,

  I'm not sure what you mean by "manually installed", but you need a print driver for the printer recognized by Windows. Go to this page to download the driver you need for whatever version of Windows you have: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=14497&locale=en_US&taskId=135&prodSeriesId=25522&prodTypeId=18972&lang=en&cc=us .

  Once you have downloaded the right print driver, I let the computer do the installation.  NOTE: you may need to completely uninstall what you've done "manually" so that the correct driver is working correctly. See the HP Web site for more information (I'd do it, but I do not know what operating system you have and its depth of Bit (32 or 64)).

  Post here if you need further instructions or assistance (be sure to include your OS and Bit depth). Let me know how you fare.

  Kind regards

  BearPup

• When you turn my computer to get on the desktop windows stops before and an application error pops up that is described below.

  Lsass.exe - application error

  x application failed if initialize properly (0xc00000005) click on OK to close the application
  the OK button is less

  I tried many ways to restart the F8 advise such items that start windows normally, know last good configuration, safe mode and nothing works.  It happened for about 12 hours.  the computer works fine until what happens... not sure if a virus has infected my computer or not.  When you click OK will appear dark and the mouse works but nothing else is running or change.

  sbdci,
  If you are able to boot mode safe mode with command prompt or start from a XP CD to the recovery console and run the following commands.

  Chkdsk /r

  sfc/scannow

  Also if you go the Support technique Microsoft and search lsass.exe it will give a list of articles on the issue.  There are many elements that interact with this file, then you may want to look at the search results to see if any apply to your situation.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Secure a PDF "unlock" in view of the browser window, allow printing and recording

  We have a problem. We secure our PDF for printing is not permitted before posting on our WordPress site. The problem is when people open in any browser they are now able to print very well. The only way that the PDF is locked is if you save on your PC and try printing again. We must be able to display PDF LOCKED files to our Web site. This feature worked fine before the last update Adobe Reader XI. I feel like it is a bug. Does anyone else have this problem? How we solve this problem?

  When you "secure" PDF to restrict certain operations, Acrobat appears an alert that all Adobe products meet these restrictions, but PDF 3 rd-party viewers cannot. That's what you're up against. Preview PDF in Firefox, Safari and Chrome do not respect PDF permissions. If you want to really secure your PDF documents, you must go with a solution of DRM (like Adobe LiveCycle).

• HP Laserjet installation on Windows 2012 print server

  Hello Forums HP

  I try to add a Hp Laserjet P4515 on a Server Windows 2012 print and update its parameters to itself all 6 trays installed.

  I realized that on a Windows Server 2003 print using HP PCL 5 universal print drivers by using the Automatic Configuration under device settings option in the printer properties. However, following the same procedure on the server of 2012 option Update configuration is missing.

  I left the configuration of the printer automatically select the driver which is listed as HP LaserJet P4515 PCL6 on the name of the driver class and Micorsoft Point and print on the Advanced tab.

  Does anyone know how to get the driver to update the config?

  Regards,

  Cam

  I finally got this working. Remove the printer and starting from scratch.

  I have downlaoded 32-bit and 64-bit drivers PCL6 and extracts into a folder. Started the installation of the new printer manually and unchecked the box detect automatically the driver. Come in 64 bit location extracted folder and allow the driver to install manually. When installation is completed I went the printer properties/sharing tab and select additional drivers and checked the x 86 button. Then, said the browser in the 32-bit extracted folder.

• slow printing and copying

  After replacement of the ink cartridges and install another version of Windows Xp, print and copy the characteristics of my hp f 380 all in one has become very slow, some time does not. I installed the UN and re installed the software of the product several times... no results. I installed the print and scan hp diagnostic utilities, they show that everything is OK. .. What to do

  This is caused by the failure of one of your cartridges.  Remove the black print cartridge and print a test page.  The printer prints at a normal speed?  Is therefore the black cartridge was the issue and needs to be replaced.  If it isn't then, put the black back cartridge in and remove the color cartridge and the test page printed.  If the printer now prints speed the color cartridge is responsible and must be replaced.

• HP Officejet Pro 8610: hp officejet 8610 printer error "Please stop your printer, and then click.

  When I turn on my HP Officejet Pro 8610 - it goes through its cycle - once it ends the initialization of the startup LCD flashes a Blue Screen of Death with B8931C7C for less than a second, then the screen shows printer error "Please stop your printer, and then click.

  I've tried so far, I've tried it unpluggin at the back, wait 15 seconds and 60 seconds.  Also this operation and in him plugging in several power strips and directly into the wall outlet.

  I was able to restore the default settings at one time.  This questions has gradually deteriorated to the point that wow its very pretty in a loop without end with failure - consistantly crashing after start up - please advise.

  Hi @mrberad,

  Welcome to the Forums of HP Support!

  I understand that your printer HP Officejet Pro 8610 is stuck in an error state. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating, it would be for you. The error you receive is usually related to a general printer error, sometimes leading to a hardware problem.

  I take a flashlight and look inside the obstruction.

  Use this guide to check obstructions:

  • Displays a Message 'Transport Jam'

  I see that you reset the default printer. Have you tried a reset complete semi? I can send you this information in a private message. In the forum next to your handle name simply click on the envelope to see.

  If you have completed all the above steps and your product still has a problem, service the product.

  If the printer is buyer's remorse period, you can take that back at the point of sale or contact HP.

  Contact HP for service in all countries except Asia-Pacific.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• OfficeJet pro 8500 a, Windows XP, printer receives information but prints blank page.

  OfficeJet pro 8500 a, Windows XP, printer receives information but prints blank page.  Test page out of rose.  Ran test, test page out of rose

  The whole page out pink (which means a solid pink page) or is it roses words, boxes, and

• Can I use a printer HP Officejet 6310 on windows XP, vista and 7

  Original title: HP Officejet 6310 printer

  I have two computers, a desktop computer running XP Pro and a laptop running Vista.  I recently bought a laptop running Windows 7 64-bit.  Can I use a HP 6310 printer on all three?

  Hello

  Windows Compatibility Center shows that this printer is compatible with windows XP, Vista and 7. Drivers for all the operating system three are offered by HP, so you should be able to use this printer on all three OS.

• HP OfficeJet Pro 8710: HP OfficeJet Pro 8710 print do not tried HP Print and Scan Doctor

  Hello HP Forum,

  I'm new and have read many articles on printing does not. I had this printer yesterday and I was so excited to use it! When came home... DOH! Nothing prints not! So, I used the print and Scan doctor and that fixed it... temporarily. Now it won't print and print and scan doctor said nothing! I printed something this morning, but I saw a mistake, then I went to print it again, nothing would have uttered. I'm getting a little angry that I (May) have lost $170 on this thing.

  I could really use some help please! If not, I just lost $170 on this thing.

  My system is Windows 10 1511 Pro 64 - Bit, and the printer is USB connected.

  Thanks in advance,

  HPOJPro8710

  Edit: I just tried printing HP and Scan Doctor 4.9 once again, now it works again. But this will not last forever, I need a permanent solution.

  Edit 2: I forgot to add that I intend to leave it on all the time. It is good to do? Causing my problems?  My grandparents have their HP OfficeJet Pro 8600 24/7 for I don't know how many years! haha and they have no problem!

  I got a HP OfficeJet 4630 USB connected, and I turned off each time and printed correctly. Only had to fix once with HP print and Scan doctor.

  Hi, seems that your computer is powered off the USB ports to save energy.
  Check in the Device Manager.
  Check under USB controllers.
  Check all USB hub root.

  Select power management and ensure that:

  Allow the computer to turn off this device to save power is DISABLED.

  Use a USB cable of good quality, not more than 6 feet long.

  Connect the 8710 directly to a power outlet wall.

• Cannot use my L7860 printer from an XP network on a desktop windows 7

  I use a home network of XP Pro I can accsess the L7680 form my XP laptop but not my desktop Windows 7 Pro. Windows 7 see the printer on the network but will not be able to communicate with it all I get is an error message 0 x 00000012.

  Still can not coming on the XP network printer, I found the solution to my problem doesn't leave it that I wanted to but it works. By taking the plug it on the Windows Xp network printer 7, now I can use the printer on all the computers on the network. XP, Vista and Windows 7.

  Thank you for your time and your efforts.

  Don

• Windows Vista 7 and HP Officejet Pro 8500 A910 connected wireless but does not properly

  I just moved in with roommate and wireless to connect to Windows Vista 7 with HP Officejet Pro 8500 A910... when I select print test page or a document to print, the printer and the computer are connected and respond, but instead of the test page or document the printer starts printing of dozens of pages of AI computer jargin: % BeginProlog %. : file Pscript_WinNT_ErrorHandler 5.0 0/currentpacking where{pop/oldpack...etc etc... This jargin continues for more than several pages. Anyone know what is the problem and how to fix?   Thank you, cropcircleguy

  Hello

  Please visit the link below to fix the problem.

  http://whp-Java.extweb.HP.com/ewfrf/wc/document?DocName=c01954177&LC=en&cc=us&DLC=en

• OfficeJet 6500 E709A on new HP Desktop Windows 8.1 installation problems

  Hello

  I'm troubleshooting an issue on all new HP Envy Desktop from my father-in-law and its existing OfficeJet 6500 E709A.  It came with Windows pre-installed 8.0, and I ran Windows Update to apply all the necessary patches, which included the upgrade from PC to Windows 8.1.  His previous PC is a Dell Windows XP, but due to the end of LIFE of XP, he bought a new HP PC.  I had him download 64-bit Windows 8.1 for the printer on the HP site and it did not work properly.  I tried to uninstall using the uninstall on the HP support site and requiring a reboot.  We then tried to reinstall the software after the restart and he said that it was extracted files but did not say where they were extracted to.  The extract window goes away and then it's just sitting there and nothing else happened.  I also saw another method to install the printer through the computer to be scanned and then decide the best software and driver to use.  Who started working and then just sit there as well and did not finish.  I'm in and I normally don't have these types of issues, but for some reason any, that he's not well.  I also went to the Microsoft site to test hardware compatibility with Windows 8.0/8.1 and it said it was, but other people said that it is not based on their experiences.  I have tried everything I know and searched this forum and google for the answers and don't come up with anything.

  1. when the software is extraction, can you please tell me where this is extraction to (IE folder Temp, Windows, etc.)?

  2. the software and drivers are 10 22, 2012, is there new files that you can give?

  3 is this fully certified by HP printer to run on Windows 8.0/8.1?

  4. is there anything else I can try?  I think I saw a troubleshooting step when you install from the CD and then download the updated Support files or windows.  I don't remember what OS files were on the CD.  Since it is in another State, I do it via webex with him to control and do what I tell you him to do, it complicates things.

  Help, please!  This is frustrating me like him.

  Thank you

  Rob

  Hello

  First, enter the installation folder and delete all current software that could be partially installed.

  To access the installation folder, click R on your keyboard and the Windows logo keys. the Run dialog box is displayed.

  Type %temp%, and then click OK.

  Open the HP installation folder that begins with the characters in 7z, if there are several just open the most recent one.

  Open the Util folder, then select the CCC folder and run the Uninstall_L3.bat file.

  In the listed command line click on Enter and confirm a window of dialogue for the installation of multiple, don't forget to restart the PC once you will be prompted to do so.

  Proceed as follows, in my view, it should solve the problem described:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  Kind regards
  Shlomi