OfficeJet pro x551dw: presentation of quality setting

Similar Questions

• OfficeJet Pro X551dw: A4 borderless

  Just install my replacement printer. I do a lot of graphic work where I'm used to color print in A4 borderless. Worried. I don't see any reference on how to configure the printer for borderless. I saw on the Forum that photo without postcards print margin is feasible, but I need exit A4.
  If I'm missing what is obvious?
  How do return you to the settings papermargin and can be done with negative x or shift is forcing a borderless printing?

  Or is there a work around?

  Hello

  HP Officejet Pro X551dwdos does not provide the functionality of the printer without borders.

  You can find the specifications below:

  Borderless printing: No
  
  http://store.hp.com/us/en/pdp/hp-officejet-pro-x551dw-printer
  

  Kind regards

  Shlomi

• HP Officejet Pro 8600 Plus Scan quality issue

  Hello

  I just set up my HP Officejet Pro 8600 Plus, and everything seems to work properly.  I am really disappointed by the quality of the images so, so I thought I'd see if anyone has experienced the same problem?

  The scanned images are very dynamic, but are too.  Detail is lost in the scan either because the brightness, or because the scanner is not properly using the resolution I have him ask to scan (600 dpi).  I have tried various different brightness and contrast settings in the scan dialog, nothing helps.  Printing HP and Scan Doctor reported no problem.  Increase the resolution of scanning on the 8600 is not helped either.

  I joined a segment of an image of the 8600 and a lot cheaper all-in-one I expected to replace, a canon mp630.  I have bought the 8600 because the scanner component had good reviews, but based on my experience, that I'm starting to have my doubts!

  Please let me know if you think there's nothing I can do to improve the quality of the scans?

  I use Windows 7 Ultimate, 64-bit.

  Thank you

  Pete

  8600 scan 600 dpi (Note lack of paper grain)

  

  Canon MP630, 600 dpi (capture of paper grain, wash the details)

  

  Unfortunately, I must point out that the replacement was no better.  It's a real shame, old flat scanner HP I was replacing with the ACM was high quality, but the Pro 8600 scanner was simply not enough good.

  Ultimately I exchanged for another manufacturer MFP that produces a large part analysis better (even if printing is not as good).

  I had much rather have paid more for a higher quality scan on the HP, but this option is not available to me, which is a shame!  On the 8600 Pro scan color reproduction was great, but there not only to capture the details.

  You can adjust for color problems in the software, but if the detail is not captured, you can't put it in!

• HP Officejet Pro 6830: How can I set up my printer to print only in black and white?

  Hello
  I was wondering if someone can help me. I want to be able to print in black just on my printer.

  My printer is a HP Officejet Pro 6830, and my operating system is Mac OS X 10.10 Yosemite.

  I don't have an option on my Word program which allows me to 'gray levels' or any type of color option.

  Any help would be great, thank you in advance!

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print. The print window is displayed.
  NOTE: The print window might be minimized: click Show details to display all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset.

  A used preset will be default, so simply select the standard preset to print in color.

  Shlomi

• printer hp officejet pro 8610: new HP Officejet Pro 8610 Plus router network setting locked by admin impossible to reconfigure

  need to change the network settings on officejet pro 8610 more printer but locked by admin settings. Also, I have printed the network configuration page but could not open http://192.168.223.1with browser, connection has expired.  Help, please.

  Hi kimvb,

  Thanks for joining the forum to Support HP for a solution to your problem.

  I understand that you have a HP Officejet Pro 8610 e-all-in-one printer you need to change the network settings on but you can't because it has locked by admin and also, you can not access the Servicer (EWS) Web embedded with the IP address of the printer. I would like to help with that.

  There is a stain on the integrated Web server that you can join the admin settings, but if you are unable to access the built-in Web server with the IP address of the printer there is another way may work around this problem.

  I'll send you a (PM) private Message with reset information that can help. If you are unsure how to check your PMs, click here.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• All-in-one HP OfficeJet Pro X576dw: poor Fax quality with ADF

  I have a fairly new HP OfficeJet 576, which sends faxes fine when using the flat bed scanner.  When documents are sent by fax using the ADF, the receiving end gets a copy of very poor quality; the document is very light and the lower part is impossible to read.  No streaks or lines in the document.

  The test page was sent using a single sheet and the ADF seemed to treat the paper without any problem.

  The ADF is necessary because most of the faxes include several pages.

  Any ideas?

  Hello

  Can you please confirm what version of firmware you have?
  The most recent version ends with 1409BR. We find it by pressing the question mark, and then "touch" printer information.

  If you have the latest, please install and let me know. I'll see if I can help.

• HP Officejet Pro 8600 low scan quality

  My scanned documents are of very poor quality on my computer. There is a line in the middle of each page and the colors are very dull and low quality. Can anyone here help to solve this problem?

  It's weird that the 8600 pro has separate scanners, one for glass and the other the ADF.

  If you lift the lid, the ADF scanner is under the small pane on the left side, we get the image for the paper to move through the window, so a spot on the window would result in a line in the image. You can clean the glass with a lint or paper towels.

  A line in the scan glass, usually means dead sensor or dust inside the scanner, in this case, the paper does not move, the scanner moves on and forms an image, so a dead sensor would result in an incorrect line. It would be more difficult to correct.

  Here is a page from HP on how to clean the scanner glass: http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?docId=emr_na-c02881567&ac.admitted=1414217107682.876444892.199480143

• HP Officejet Pro X551dw: Do not print

  Hello people, my printer is set up and Iv used for a few weeks, but now when I try to print the printer from printing via my phone sounds like it is printing, then the flap on the printer opens, but no paper comes out air. If I try to print from my desktop via wi fi top it works, I am confused, the only thing that happen different has been that an update was available, I pressed update, but it would be not low charge and showed something of spinning on the screen and said 0% downloaded, it was like that for 5 hours then I turned it off then back on to the form. When the available down load came, I said no. Help!

  Hello

  Try restarting your router by unplugging its power for 30 seconds.

  Once the top router completely (which may take a minute or two), restart the printer and the iPhone and check for the difference.

• OfficeJet Pro K8600 - my print quality is mediocre... some colors are missing.

  With the exception of the first inch or two on a page of my printer seems to only print in red and yellow. He begins the ideal search for 2 or maybe 3 inches and then looks like there only red and yellow ink in it. The ink cartridges are all new. How will I know if the cause is my print heads? If so, should I replace both of them? Thank you!

  Here is the link to a document that deals with bad print quality for your printer model. It will give a troubleshooting to try to establish the quality of the production printer. In this document, it will show you how to print, and then read the diagnostic report.  It will show you what models of test on the average of the leaf when it comes to the health of the print heads. I hope this helps.

  If you reach the end of the document and have not fixed the problem of printer output; sought to be the replacement of the product.

  If you are still in warranty, HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call. Technical Support case HP formula call: https://h10025.www1.hp.com/ewfrf/wc/phoneInput?cc=us&dlc=en&lc=en&product=5061082

• HP Officejet Pro 8620: after that I set up my fax, cannot answer phone or answering machine messages

  I recently set up my fax feature and now I cannot answer my phone and cannot get messages on my answering machine.  I'd be ok just to cancel the fax feature that I use really, but do not know how to do this.

  I really need to get messages more faxes.  Any help is greatly appreciated!

  Charles, thanks again for your help.  I have reset my answering machine and now everything works!

  I am so happy!!

  Thanks again

• HP Officejet Pro 8625: How can I set up the printer to print only in black

  What is value?

  Hi GloGlo66,

  Here is a document that describes how to print in black under windows.  If you have a MAC let me know and I'll attach this document.

  I don't know what you mean by what is value?
  Jean

• OfficeJet pro 8500 wireless problems

  Hello

  I have a HP Officejet Pro 8500 has more printer, set up my wireless network. It is connected to my Linksys E2000 wireless router (wireless, do not use the LAN cable). I print from my Win7 64 bit laptop, my iPhone / iPad (via airprint).

  This configuration is used to work perfectly, and 1 day to the other, I can not connect to the printer. I think that this happened after the printer has proposed an update of the firmware. No changes have been made to firmware on my laptop or a router, without the router settings have been changed.

  If I use my i-devices, no airprint printer is detected. From my laptop, I get an error indicating that a connection to the printer cannot be established.

  I tried selecting the IP manually (192.168.1.120), I did a factory reset the printer and run the wizzard wireless again and finally I connected a router LAN cable direct to the printer. I managed to connect the printer to the network, the network printer diagnostics detects any flaws, but the machine is still invisible to other devices...

  Now, I'm quite stuck...

  wingwalker1, is the light on the printer and a solid blue wireless? She has the same IP as before (which is the IP address if it has changed)?

  When you say thayt it has not completed the wireless configuration wizard, at - he gave a specific failure message?

  I want you to do a reset of network. First turn off the printer and the computer, and then unplug the power to the router for 10 seconds and plug it back. Wait for all lights to come back on the router and turn on the printer and the computer.

  Go to wireless menu, reset the network defaults and restart the wireless configuration wizard.

  I would like to know how it goes!

• 4.3 "touchscreen of the Officejet Pro 8600 Premium could be established in the Spanish language? Help me!

  I just sent an e-mail to HP support, but unfortunately they never told me anything. I need to buy a printer for trade muy and I would like to acquire the Officejet Pro 8600 Premium, but I don't know if his screen 4.3 "touchscreen could be implemented in the Spanish language. So my question is: can the Officejet Pro 8600 Premium touch screen set up in the Spanish language? Please, ¡Anyone help me!

  Yes, you can.

  The 8600 Officejet Pro may be installed in different languages.

  I provide and example of this:

  • 
  • This screenshot is when you select the paper size for copying:

  And another example:

  • 
  • It is the main window of the façade.

  * Don't forget to click on the stars KUDOS say thank you

  * also click on the Solution button if your question is answered.

• HP Officejet pro 8620: Scan To Email does not work

  I have an Officejet pro 8620. I've set up parameters which allow to scan to an email address. In the end, it is said that all the settings are OK, but when I scan a document, I am not getting any email.

  What's wrong?

  Hey @jakobius,

  I understand that you have some problems with the scan to E-mail on your Officejet Pro 8620 e-all-in-one printer. I can help you with that.

  Usually, if you have entered your information on scan and she has accepted the information but refuses to analyze, it means that your server information sent e-mail saying that the information was correct, then in fact, something isn't. I suggest try to re-enter your server information, but try different ports instead.

  Please let me know if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• OfficeJet Pro 8600 N911n scan to folder gives "system failure."

  We have an Officejet Pro 8600 N911n and we set it up to scan to folder, but it gives an error "system failure."  Rights have been given and file is shared with all the rights and even tried using the admin account and still the same error.  They had a different printer configuration a year or two there has been no problem.  Here is the screenshot of the error.

  I see that a FW update for the 8600 JO is available on the HP support site.    By chance, it is a point made in this update?    I tested a network folder today and it worked fine.   Have you tried other folders as well?