Sam s173-1415: cannot use the restore CD - 'Bad Machine' error message appears

Similar Questions

• Qosmio F25: Cannot use the recovery CD - bad CD message appears

  I have a Qosmio F25-AV205. When I tried to use the recovery cd set with my laptop computer, an error message appears saying that I use the wrong cd and this cd is for model F25. Only despite I have the same model that the message...

  What is the problem?

  Someone replace the motherboard of your laptop?
  Sometime, a Toshiba system has had the system board replaced, it may become impossible to image the system using the recovery CD.

  The DMI string contains the model number of the system. When you use a recovery CD to recreate the image on a system, the installation process examines the DMI string and compares this string to the image being restored to ensure that the right image is applied to the correct machine.

  If the DMI string and the label on the image n t game, a bad machine or bad CD message will appear.
  In this case, you should ask the ASP in your country for assistance

• Cannot use the references in Subvi cluster (error 1055, invalid references)

  Hello

  I'm going through a lot of that through a cluster to a Subvi.

  The idea here is to manipulate objects in the MainVI in the nodes property thorugh Subvi, which gains the reference number of the cluster.

  In the Subvi, I use unbunling by name to access the references I need. However, I get an error 1055 (invalid references) every time I try to access the object by using the node property.

  What I am doing wrong?

  Attached you will find three files:

  The mainVI: Main.vi

  The Subvi: Single_Cam_RefBased.vi

  The def of the type for the cluster: RefClusterTypeDefinition.ctl

  Thanks in advance,

  Marcel

  SteveChandler wrote:

  The constant you have wired to the bundle is not the same as the cluster of type defined wired to your Subvi.

  I was going to say the same thing. This should be the first thing to try. (I haven't studied the Subvi, but it seems buggy too...)

  COMMENT: Again something is screwed in the current VI which makes no sense. Hovering above the terminal should tell us information about the corecion, but in this case it is said that the terminal is something like a cluster of error. This might just be a cosmetic bug...

  

• Cannot retrieve the Satellite P200-123 - IMAGEX error message

  Hello

  I HAVE A LAPTOP TOSHIBA P200-123 AND I AM DOING A RECOVERY, BUT FOR SOME REASON, IT IS ABOUT 19 TO 26% AND THEN RETURNS WITH AN ERROR SAYING THAT IT COULD
  IS NOT APPLICABLE TO IMAGEX AND I'M AT A LOSE WHAT TO DO.

  IS THERE ANYONE WHO CAN HELP ME WITH THIS PROBLEM.

  Hello Erin

  It is not easy to say why this happens because this error message occurs for different issues.
  One thing can be the reason for this.

  If I well remember when you start the recovery option it must be key SETUP (next step after the confirmation of the language). Maybe you're trying to use installation option OS on the existing partition).
  I tested it a long time ago, and I can confirm that this will not work. What is happening is very strange.
  What is happening, it's a procedure facility trying to install the OS on partition WinRE (Vista). This partition is 1.5 GB only and after 20 or 30% facilities simply stops.
  Maybe you try to do this. I do not know.

  Try using the installation of recovery with the default settings. Don't change anything in the configuration option.
  Test if you please and let me know exactly what is happening.

• Cannot build the project to burn. Error message

  Hi guys

  New to CS4. Used the first several years ago, went through to Final Cut Pro and just moved backe to Adobe CS4.

  The problem I have is that I did the project in again and all the links are fine, but when I click on the build, after 5 seconds of her building, I get the error message "the SOFTWARE INTERNAL ERROR:.\Vobulator\TitlePlanner\CVOBUPlanner.cpp,line 332.

  Does anyone know how to fix this?

  I appreciate any suggestions.

  If you search the forum by using the keyword "vobulator", you will get some

  ideas on how to solve this problem.  I hope that one of them will work for you.

  -Jeff

• "The missing config file corrupt" error message appears

  When I start my laptop, I get the "Missing config file corrupt" message and I can't start windows, it falls needs the original installation cd-rom!

  It seems that I do not have this cd? That I should?

  I don't want to just do a restore from the hard drive that I'll lose everything.

  Any ideas?

  Please, I beg you!

  Hello

  Have you tried booting in safe mode?
  If it is possible, then you can try to use the System Restore tool under Programs Accessories System Tools, you should find.

  Try to roll back the OS to the beginning. Well, if this procedure doesn't help then as said jmatthews you save files on the other computer and reinstall the operating system.

• Could not load the dreamweaver because it gives the dreamweaver.exe - bad image error message

  I have been using Adobe Dreamweaver 2015 for a few weeks, but all of a sudden, I can't load the software because it gives an error message with "dreamweaver.exe - bad image".

  How can I fix?

  The error points to a library file corrupted, usually ATMLIB.dll.

  This could have been caused by the malware, therefore, it is best to run a program anti-malware first.

  After that, use the Adobe Creative cloud cleaning tool to solve installation problems

• Cannot use the set option in WMP, error: Media is not available and cannot access the server.

  Original title: W7 error play "Media is not available.

  On W7 Ultimate, I'm having a problem in the use of "play to" media action to my Sony TV. The tv is visible as a device and it is the same for the laptop to the TV. On laptop I get the error: "themedia is not available." Similarly, when I try to access the laptop to TV, I get error "can not access the server. any solution?

  What exact model Sony TV? You may need to install additional software
  See the content if you want to browse the content on the computer from the computer
  the TV. as to play to, see
  http://blogs.msdn.com/b/E7/archive/2009/05/12/media-streaming-with-Windows-7.aspx
  for beginners.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Cannot use Internet Explorer and Windows Store, error messages "proxy server is unresponsive and we could not connect to the Bank.

  Original title: store in connection to wide band BSNL

  I browse the Internet via a broadband BSNL connection. I have no problem accessing internet through google chrome, but IE does not open web pages saying "proxy server is not responding", shop said "we were not able to connect to the Bank. This could happen because of the connection to the server or the connection timed out." How to solve this?

  Hi Laurent,.

  Glad to know the steps described in the previous post has helped you.

  To solve the problem with Windows Store, I suggest you try these methods.

  Method 1:

  Let's first try run the troubleshooter modern UI App and check if it helps.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:
  If the problem persists, I suggest you make sure that the date and time are correct on the computer.

  (a) check the Date/time setting by selecting the tile of office , then left click on the date/time in the corner.

  (b) click change date and time settings. And then check zone is correct as well as the internet time tab has the ability to synchronize with the time server Internet.

  See the article for more information.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-in/Windows-8/what-troubleshoot-problems-app

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot use or restore Vista after SP1 uninstall

  original title: cannot use or restore after uninstalling SP1 Vista - please help.

  In order to perform an upgrade of Vista installation to repair the damage caused by a virus recently, I uninstalled Service Pack 1 (because installation upgrade will not work with SP1). I know there are other things I should have done (a sfc/scannow in theCommandPrompt) or SP1 slipstreamed DVD, but I did not know them at the time, nor did I think there will be problems as a result of an uninstallation of SP1. As the title suggests, I got kind of wrong.

  It all started after uninstallation, which seemed successful. I rebooted, and instead to get Vista without SP1, I get an error code of the variety of the command prompt (just the black screen with white writing). This continues for a couple of times, and after a few remedies attempts that fail miserably, I decide to systemrestore(using the Vista CD, of course) at a point before uninstalling SP1. I think it will work, but the first time, as it gets to the "development of restoration" and how he hung for three hours before, I decided to turn off the computer because he was of course not moveable anywhere. I restart and let the boot from HARD drive upwards to see if maybe something worked, and I get to the login screen of Vista, how I notice none of my devices work. The mouse or the keyboard responds (both are USB) and the attempts with the PS/2 versions don't either. I thought maybe it was a driver problem, so I reinstalled the driver chipset at the disk using my laptop (took thedesktopHARD drive, put in a box outside, then executed the installer of the chipset on my laptop and said to install outside driver), but it could not solve the problem. I also tried other restorations, but invariably they fail after a certain point, which gives me an error message:

  "System restore failed due to an unspecified error. The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction. (0x80071AA7).

  I googled errormessageand see that most people encounter it while trying to install a service pack, I thought it was a problem with restoring Vista without SP1 to Vista SP1. Thusly, I used the command from theVistaCD command-line option to read my Windows Update log and got the following:

  "2010-07-09 04:44:32:593 664 29 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =".
  2010-07-09 04:44:32:593 664 29 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 04:44:32:593 664 29 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 04:44:32:593 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:34:605 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:36:617 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 04:44:38:630 664 29 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 15:26:30:160 216 12 c Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 15:26:30:160 216 12 c Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 15:26:30:160 216 12 c Misc = Module: X:\Windows\system32\wuapi.dll
  2010-07-09 15:26:30:160 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:32:172 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:34:185 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 c COMAPI FATAL: unable to connect to service (hr = 80040154)
  2010-07-09 15:26:36:197 216 12 ch. COMAPI WARNING: failed to connect to the service. (hr = 80040154)
  2010-07-09 16:04:19:912 356 Misc 3 b 0 = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:04:19:912 b 356 3-0 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:04:19:912 b 356 3-0 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:04:19:912 b 356 3-0 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 Misc = logging initialized (build: 6.0.6000.16386, tz:-0800) =.
  2010-07-09 16:18:08:745 532 248 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:18:08:745 532 248 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:18:08:745 532 248 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:18:08:745 532 248 COMAPI WARNING: failed to connect to the service. (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 Misc = logging initialized (build: 7.4.7600.226, tz:-0800) =.
  2010-07-09 16:25:53:894 976 244 Misc = process: X:\windows\system32\Rstrui.exe
  2010-07-09 16:25:53:894 976 244 Misc = Module: X:\windows\system32\wuapi.dll
  2010-07-09 16:25:53:894 976 244 COMAPI FATALE: unable to connect to service (hr = 80080005)
  2010-07-09 16:25:53:894 976 244 COMAPI WARNING: failed to connect to the service. (HR = 80080005) »

  I can't interpret it, although it seems to confirm my suspicions the transition from other than the SP1 and SP1 is causing issues. If someone else could interpret this?

  Basically I have a non-functional operating system, I can not restore it to a State of operation, nor access the input devices because it does not work on the login screen. Anyone all proposed solutions to the problem, short of a clean install of Vista? I don't want to reformat unless absolutely necessary.

  This is the forum Vista install.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/threads

  You can try the repair Forum.

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code redemption to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they c

  Sorry I added it in the question, sorry about that part!

  Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code CD Exchange to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they could transfer to my Surface and they canceled the monthly... but no, I'm still paying every month and I have a box of cd $ 500 that I can't use! Help, please!  How can I activate this pay redemption code (which does not work? I tried for hours!) and I pay monthly?  Help, please!

  Hi shannonr44052735,

  I see that you have an active subscription to Acrobat Pro DC under your email address.

  See this KB doc for help: redemption code help

  If your redemption code does not work, I will propose you to return what you already active subscription.

  You can install Acrobat Pro DC from this link: download Pro or Standard versions of Acrobat DC, XI or X

  Make sure that you use the same Adobe ID, in which you have Acrobat subscription.

  Let us know if you need help.

  Kind regards

  Meenakshi

• Lightroom cannot use the catalouge named 'Lightroom '.

  I read online for a solution for this for two hours. I tried all the solutions I found. Please can someone help me with this error message

  "Lightroom cannot use the catalouge named 'lightroom' because it is not writable and cannot be opened.

  I changed the permissions, without success.

  I ran as administrator with no luck.

  There is no current lock file.

  What else can I try?

  Thank you very much

  At this point, I think that you need to restore a recent backup of your catalog file.

• Satellite M70: Question on registration after using the restore CD?

  I have reinstalled the OS on my 70 M satellite using the restore CD and now system even once asked me to register with Microsoft and Toshiba. I've already done, so I jumped it. I just want to ask if I use the recovery CD, I have to register again with Toshiba and Microsoft, or is not necessary.

  Hello

  You n t need to save anything when installing Toshiba recovery image.
  The Toshiba recovery image is already out.
  You can register your device on the Toshiba site for more support, but this procedure has nothing to do with the recovery image record.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=000000147a

• How can I copy bookmarks from another PC without using the restoration is not to lose the curtrent PC each

  I want to copy favorites from another PC, do not use the restore function inorder does not remove bookmarks on current PC

  Export to a HTML file, and then import the HTML file to the other computer, which will add bookmarks to existing ones.

  • https://support.Mozilla.com/kb/exporting+bookmarks+to+an+HTML+file
  • https://support.Mozilla.com/kb/importing+bookmarks+from+an+HTML+file