OID 11.1.1.5.0 connector deliver the connection of IOM 11.1.1.5.0

Similar Questions

• Information on the connector of the host computer

  Hello
  
  I need some information/docs/ppt/slides on mainframe connectors. I don't know where to find the documentation for the connector on the mainframe for IOM.
  
  If anyone knows the path, or you have any type of documentation, please share.
  
  Thanks in advance,
  Kalpana.

  Documentation is shipped with the connector pack (OOTB). Each connector has a folder with the name of Documentation

• Group seeking reconciliation in the connector of the OID of filtering

  Is it possible to add a filter to the scheduled task of reconciliation research group in the connector of the OID 9.0.4.11?
  My version of the IOM is 9.1.0.2 BP10
  
  Thank you

  I went through the doc, I dnt think you can do.
  Look in the eyes to the top of Lookup.OID.Configuration, you could get something here.

  Thank you
  Suren

• Fluid was detected in the connector of the lightning.

  I get a warning when my iPhone is plugged into its lighting cable saying 'Disconnect accessory lightning' "Liquid has been detected in the connector of the lightning" ' to protect your iPhone, unplug this accessory of lightning, and allow the connector to dry. "

  The cable is as dry as a BONE, the phone has never been exposed to water, other than standard moisture. I have several cables, and it happens with all of them.

  Clues?

  Thank you.

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  If the steps above do not help, you may need to test in an Apple store.

• xw9400: xw9400. Pinout of the need for the connectors of the case (no psu connectors, only those in the case)

  I need the list of pins for various connectors case-Strip pin, especially J24 but other multispindle those too.

  Manual of Tyan S2915 Board for is a different version than that of poor quality that they OEM would be at HP for the 9400 and HP Tech Ref for the 9400 only provides pinouts for connectors well defined including pinout lie anywhere.

  The connector of the Panel before xw9400 J34 (there is no J24) pinout, the mother, is map:

  

  There are 2 key positions (lack of spindle) on pins 10 and 15.  Use these empty pins to help identify the signals.

  The pinout is very similar to other former workstations HP.  A few tips:

  -Pins 1 and 3 are for the harddrive activity led.

  -Terminals 2 and 4 are for the power light.  HP systems have back to back LED connected between these pins.  A green is on and functioning normal and red lights (and flashes error codes) when there are errors.

  -Connect a momentary between pins 5 and 6 switch will turn on the computer and off.

  -Connection of a momemtary between pins 7 and 8 switch will force a system reset.

  -PIN 9 is designated as + 5V, but it is powered by a 100 ohm pullup resistor to + 5V, so it will not provide a lot of power.  FOR INFO.

  -SPKR + and SPKR - are for the internal speaker.

  Most of the other connectors xw9400 follow standards of industry, i.e. the IDE drive and floppy connectors.

  Is there anything else you want to know?

• Computer laptop HP G60-230US, - power connector inside the computer laptop seems to be losing

  HP G60-230US laptop

  I started to notice that my laptop power connection has been a little lost; a little later, I needed to play a bit with the connection so that the power would not disconnect; now, it seems that something got completely lost inside the connector and I get no power in my laptop.  How can I get this connector and replace or tighten?  I already tried to open the lid, but did not see an easy way to access it.  Thank you very much for your suggestions.

  Levega.

  Your power supply is not on the system board.

  Here's an Ebay link for your jack.

  http://www.eBay.com/ITM/HP-G60-230US-AC-DC-power-Jack-port-socket-cable-harness-/281245790468?PT=Laptop_Adapters_Chargers & Hash = item417b8e3104 #ht_101wt_1312

  Here is the link for your manual. "Page 4-46.

  http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

  I hope this helps.

  REO

• Satellite A60 - how to fix a female connector on the motherboard?

  I have a Satellite A60 which is since 2005. About 6 months ago the CPU fan started running all the time and recently, the computer began to fade.

  Thinking that it is ongoing overheating, I decided to completely disassemble the computer, clean it thoroughly, remove the old thermal paste and install one DIMM memory more important.

  Well, everything goes like clockwork, until I tried to put the connector of the power on switch in the plug. It wasn't easy so I put gently a little more pressure on the connector using tweezers. At this time, the socket broke apart from the motherboard.

  I don't have the tools for a welding job, but could a competent technician successfully reattach or is there a new mobo in my future.

  Thanks for the tips!

  Dan

  Hello

  To be honest also don t know how to solve this problem, because I m not a technician for laptop and I believe that you will not find the technicians of laptop here because it s only a user to user forum.

  Regarding this issue, please contact an authorized service provider. Talk to the technicians and buy a cup of coffee. I'm sure they'll help you ;)

  Welcome them

• Presentation of connector to the front panel DC7700

  Hello

  Cannot find the necessary schema in the database to support HP I hope someone on the forum can direct me to the table of connector on the front panel of the system (format minitour Convertible) DC7700 Board; It is available to the pins that tells me where to connect the various switches, LEDs etc on a new case.

  Any advice welcome.

  Peter

  FOUND IT!... in a previous post of the forum [see '' info DC 7700 Convertible Minitowers (CMT) motherboard?']  Among other things - who - shows that I had not scanned the tech Ref guide closley enough!  ;~[

  And thank you "mdscole" to highlight the trail.

  ;~) !!

• How can I copy and paste a connector on the sheet without changing name?

  Any way to do it?

  If this isn't the case, it would be very interesting to add functionality.

  dbur,

  Thanks for giving us an easy one this time...  The function exists (even if it is not the default).   Copy the link on Page (Ctrl + C) and instead of a straight paste (Ctrl + V), you can make a (Ctrl + Shift + V) - or go for change-> paste special-> paste without renaming on the connectors Page to accomplish the same thing.   This redundant with the link of the Page On and also copy the intelligence network as well.

  I advised R & D if users copy an existing on the Page that the default behavior should be changed to allow the same Connector/Net copy to be placed in multiple locations (without rename it to a new connector on the Page).  If you also think that this should be the default case, let us know!   R & D a "play it safe" to eliminate the possibility that a double connection would be made unintensionally.

  Kind regards

  -Pat

• Why a VI block diagram display cannot show the display "connector" in the corner of UR, as does the front panel display?

  There may be a good reason for it that I just didn't understand. I saw no doubts, it searches the site of NOR, however.

  But it seems to me quite annoying to always have to go to the front to access the connector pane view, especially if some of these connectors are hidden. So I have to go the block diagram, guess what control/indicator I want display, go back to the FP to check it on the part of the connector, and then go back and hide it again, and repeat the operation if necessary. Even if the C / I is visible on the PF, it's still an extra step or two.

  When I build the connections using the diagrams and planning where to put connectors in subVIs they would be easier to associate (inputs/outputs on the sides line up, don't have to go up and down, etc.), it would be nice to be able to work completely in the realm of block diagram.

  Cameron

  Yamaeda wrote:

  Good idea, put it in the exchange of ideas!

  He has been there for some time already. No need to reproduce...

• I lost the connection to Windows 2003 server and through the connector.

  I lost the connection to Windows 2003 server and through the connector.

  original title: WHS connector has stopped working.

  Hi Mjopritchard,

  The question you have posted is related to Windows Home server and would be better suited to the Windows Home server community.
  Please visit the following link to find a community that will support what ask you:

  Support for Windows Home Server

• Rear connector of the SCXI-1520 module as input?

  Good morning,
  
  Regarding connectors on the SCXI-1520, is it possible to use the rear connector as a 68-pin input (instead of an output)? 
  
  I have the following hardware and wanted to know if it's feasible to pipe a signal from an SC-2345 to a PC through the path below.
  
  NI SC-2345 (Signal Cond. Block)  --> NI SCXI 1520 (Universal Strain/Bridge) via 68-pin cable   -->  NI SCXI 1600 (USB Digitizer Card) --> PC
  
  Thanks
     
  

  Hello hma1,

  Unfortunately, you will not be able to do.  The only "entry" would be taken in chassis cascading signals.

• Connector for the main thinkpad R60 touchpad tear

  Hello

  Yesterday, I removed the palmrest to install my new RAM. But accidentally, the thin wire that connects under the palmrest touchpad to the main has been torn out. I have already released the connector on the motherboard and accepted the fact that the touchpad is now unusable. I also disabled the touchpad in the BIOS.

  But what worries me is that this would affect only the touchpad or it will affect other parts of my motherboard?

  Thank you.

  Yes, it should be correct.

• HP 6200 SFF: 6200 SFF f connector Molex power connection

  Want to install ASUS Xonar DX7 that needs power.  I have a canoe to find a place to connect my Molex plug for power supply.

  Hello

  Your PC isn't a molex connector that you discovered.  Try a molex to SATA adapter. Examine the connector on the power cable from P6.

• What is this connector for the backlit keyboard? (with photo) EliteBook 8760w

  I recently bought a workstation EliteBook 8760w Mobile with the standard keyboard (not backlit).  I really, really, REALLY want to replace the keyboard with a backlit.  I think I found the connector to the Ribbon of bavklight, but I would like confirmation before ordering a new keyboard.  Can (will?) someone please let me know if the arrow on the picture is oriented on the backlight Ribbon connector?  It seems to be in the right place, based on images of the underside of the backlit keyboard for the 8760w.  Thanks in advance for any help!

  Yes, there is nothing else, it might actually be.