Similar Questions

• Workstation HP Z620 dual xeon: really only 1 6-pin power connector on the graphics card?

  Hello

  I have a question about the HP Z620 workstation.

  recently bought a dual xeon with 960 GTX installed on the 6-pin connector.

  as I can't find any other power to use nor on the power connector

  or nowhere on the set, I wonder how a graphics card must be powered only

  needs

  1 x 8-pin

  or

  1 x 8-pin + 6 pins

  or

  2 x 8 pin?

  I know there are some discussions about this in this forum, but I did not understand

  the solution. Some said there are adapters to go 6-pin to 8 pin (or 6pin to 2x8pin)?

  But how is that possible?

  like many, I know, 75 watts are max of the pci-e connection, 75 other watts Max for 1x6pin.

  so plug any adapter, 1x6pin for graphics cards that need much more power would be

  According to the standard / danger, right?

  and what about graphical installation double?

  would be happy if someone around could help me with this.

  best regards

  Chris

  The search box on this page by default search only this forum, and it is very convenient.  If you type "extra", you will find a lot of info.

  The Z620 has two of these 6-pin cable, and HP got creative and molded into two empty containers down to the black plastic fan holder before.  So, one is being used by you and the second is sitting there plugged and similar, it is used, but it is stored just it did nothing... the fan is powered differently.

  These extra HP 6 - pin PCIe power cables are not standard ATX... they are better.  The ATX standard is 75 watts can go up to the card out of the slot, and another 75 watts can come via the additional 6-pin cable.  HP 6-pin cable can do a bit more.

  This is the message that you want to read, and there there details that were not in any of the HP manuals that I searched through, but the answer was on the label of Z620 power supply.  12V 18A each, plus adding info on some special HP adapters that allow you to take a HP 6-pin and divided to two 6-pin connectors or cable HP 6-pin connector 8 pins.  Watch here.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091#M12740

• Dv6500 laptop - no Standard disc HARD SATA/power connectors

  Hi - I decided to upgrade my 80 GB Western Digital Scorpio 2.5 inches with a Seagate Momentus 2.5 inch 250 GB. The Seagate as I thought, were the standard SATA power connectors. The connectors slide on, the same thing as what I saw on all SATA 3.5 Desktop drives. We WD Scorpio, the pins are divided and snap into the motherboard. So I don't think I can use the Seagate, what 2.5 inch disks have will work with the DV6500? I thought that SATA SATA.

  Duh! Answered my question on. Looked at training, I got out and noticed there is a converter of pins of connectors SATA slide standard split connectors that facilitate their insertion in Notepad. just removed the old WD drive converter and added to the new Seagate.

• Satellite L300D - power connector broken

  I got my wife a L300D about 4 months ago now, and it has been a good computer.
  Correct autonomy and the screen is big. That's all she needs.

  However, I run into a very big problem. All being 4 months since we got it, we'll have major issues with the power adapter.
  Because it's a straight plug, rather than a 90 degree, something happened where he broke the connector inside the computer laptop itself.

  Are there opportunities to find a replacement adapter that would have a 90 degree turn? Or well, because she uses it near the bed, in order to maintain the system plugged "differently"? I hope that we can this repaired under warranty (the power cord adapter itself also has frayed to move around, I suppose) - but if not, well--I have no idea how much it will cost.

  All thoughts, well, anything would be appreciated.

  Nick

  Hello!

  I agree with sanremo. The best way is to contact your local ASP and ask them for help. I think they will help you more than we do here.

  On the Toshiba site, you can search the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Power connector has come loose on my Equium L300-146

  Hello

  Someone can tell me, how can I take my satellite phone to bits?
  Attachment of power supply located on the side is an absolute git to connect to, it is because the connector inside the laptop is loose and movements. There must be a way.

  Any info would be great

  You want to fix one?
  I mean to do the portable unit must be dismantled and if you don t have any experience with it, it can be quite complicated.
  As you probably know it must be done by authorized personnel only.

  What model do you have?

• W510 power connector loose

  Hello world

  I got a W510 renovated for a few weeks. Recently, the power connector at the back of the laptop computer between the battery and the heat exchanger is loose. How can I solve this problem?

  Thank you

  Wei

  Here is the Service Manual: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles_pdf/63Y0536_05.pdf

• Broken power connector? Where to find one?

  Hello

  the delayed of my thoshiba satellite is broken.
  Where can I find one?

  Thank you.

  Hi Michel,.

  This is the power connector on the power supply that is broken, or is the connector at the back of the laptop you?

  If it's your laptop then it is normally soldered on the motherboard and will result in the replacement of the motherboard unless you can find a suitable replacement connector and try to re - solder it.

  If the adapter connector, you can cut the broken one and weld on a replacement that you should be able to get most of the spare parts electric stockists. Ensure that you get the correct polarity since it is DC current.

  HTH

• HP Envy Phoenix power connectors

  Hello, I was just wondering since I don't have my HP ENVY Phoenix 810-145qe CTO desktop PC even if there will be some additional power connectors in the camera so I don't have to buy anything, I know that I need 3 to sata cables hd additional, anyone have this computer can tell me if there is & how it... Thank you...

  TAAA, welcome to the forum.

  Great choice of computer.  I have the 810-135qe Phoenix.  This is a very good for gaming.  I did it faster by adding an SSD.

  Here is the page of Product Specifications .  If you look at the section "Berries", it shows that there are 2-5, 25 "and 3 - 3.5 drive bays".  For this reason, I am sure that there are additional power connectors.  I'll check my computer when I have the time to see how many are available and report back.

• Compatibility card mother Benicia with connector power button on the new case

  IM wanting to upgrade my computer case but he should know if the power button connector will work with the motherboard of benicia.

  Thank you

  Richard

  Depending on the configuration of the connector of power button, HDD connectors and light power connector on the new case, you may need the connectors changes.

• HP Z620: Problem of auxiliary graphic workstation HP Z620 pci-e power connectors

  I want to fit my new GPU Z620 workstation card. I see that there are two auxiliary pci - e power connectors on the plastic support. I intend to use these two to put my new graphics card but I see potential problems.
  The problem is that in these two connectors pinout is not really to PCI-e spec. There are five female terminals to each 6 connector routes. The three terminals in the top row are crushed and two terminals downstairs is 12V. 6 cavity is empty in both connectors. As far as I know the PCI-e power connectors should have 12V power supplied to cavity n ° 4 and n ° 6 of cavity. What I have to manually change these two connectors pinout and move terminal 12V from cavity to cavity no.6 no.5 or there may be a few HP adapter that could solve this problem?

  connectors

  

  Only HP knows what HP has designed (and why) and as such, it cannot be assumed simply that a connector on a system is consistent with the 'standards' and not a "psudo owner" Connector (as seems to be the case with your PEG connector that is missing pin #3).

  Normally, a PEG 2 connector x 3 can provide 75W and as such, each 12V pin provides 1/3 of the power budget. This means that the HP "psydo owner" PEG connector, for lack of a better term, may not be able to supply 50W (if each ping is kept for the same current capabilities used in the standard 2 x 3 plug PEG).

  Then, this suggests the Z620 can only support a 175W graphics cards (with 75W of PCIe + 50W of each of the two 2 x 3 PEG connectors). Note that the standard allows graphics cards to 225W pulling 75W of the slot PCIe and 75W of each PEG 2 connector x 3!

  Thus, quantify this is to watch the quickspec for your Z620 and see what graphics cards are certified for use with your system. Then to know what cards are certified for your system, you can check what PEG connectors as appropriate are provided on these certified cards and also check what is their energy consumption. I would guess that all graphics cards that require more juice 175W has not been certified by HP...

  Since you say your card draws 165W, this budget of power seems OK during examination of the foregoing. So it should just be a matter of connect the two connectors of the PEG 2 x 3 and all should be well.

  However, it you want a card more powerful, purely based on the fact that a standard 2 x 4 connector PEG can power 150W using three-pin 12V, this would indicate that each pin can supply 50W. Assuming that the pins used in a conector of PEG 2 x 3 and 2 x 4 are the same, a 2 x 3 with only two pins 12V power connector could in theory provide 100W each. So you could in theory use a 275W card into the PCIe slot with your 2 psudo owner HP PEG connectors. BUT it means something to the pins themselves and that your HP power is up to the task (and can actually provide the necessary 275W power).

  And I would say that if you wanted a graphics 225W which is supported by standards, likley it would be a simple mod to the rider 12V among the pins for the vacancy that is normally used by the 3 pin (12V).  I'd be surprised if the block POWER HP of power and wiring could not handle the necessary extra 50W. But maybe it's a little too much for some who enjoy the guarantee.

  In any case, without owning a Z620, I would be comfortable in saying that you have no problem with this graphics card 165W and these exclusive hybrid psudo 2 x 3 PEG connectors as is

  (Heck, I don't got no problem with a 35W graphics card in a slot PCIe capable of 25W of my Dell T610 server that only supports the graphs via the inetgrated adapter)...

  But really, who knows why only two used HP pin 12V in their PEG connectors, maybe they used the best quality PINE and they were not sufficient for the cards, they chose to certify. Maybe save 2 cents for a less pin was a driving force... HP only knows what HP...

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• Power connector at right angle for laptop HP 2230 s?

  Is it possible to get an adapter at right angles to the power connector DC for my laptop HP 2230 s?

  The connector on the DC power cable that goes into the laptop out the path to the side (a good 2.5 "), which, besides being bulky, resembles an accident waiting to happen. On my old Fujitsu, the connector was barely right angle type, it came out at all, and was not a danger to catch on anything and damage the socket or the plug. This type of connector puts also much less strain on the DC input jack, as he does not act as a lever for bit.

  I've seen at right angles to the adapters for different types of cable (you plug your cable on one end and the other goes in the computer), like this:

  

  I hope you get the idea. In any case, what I would like is an adapter for the type of connector used on my HP laptop. The type of connector seems to be pretty standard in the range, so an adapter can be used with many models of HP. In the end, I hope that HP will change cables from their power supplies for laptop to come with these types of connectors at the ends, but in the meantime, is possible to get an appropriate, either through HP or a third party adapter?

  Thanks in advance to anyone who can offer suggestions!

  http://www.bixnet.com/cntlc90.html

  I know this is an old thread... but since nobody listed everything that might work, I found this on the same site listed zetto.

• I have a computer laptop g60-635dx. can I upgrade the graphics card on this laptop?

  I have a computer laptop g60-635dx. can I upgrade the graphics card on this laptop?

  Hello

  Here are the specs of your machine:

  http://bizsupport1.Austin.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02033074 & lang = to & CC = US & TaskID = 101 & prodSeriesId = 4074269 & prodTypeId = 321957

  He uses: Intel Graphics Media Accelerator 4500 M, which is soldred to the motherboard so practically you can not change because you have to change the motherboard, to buy the new video card, to change the cooling system... all adding up will cost more than a new machine.

  Kind regards.

• HP G60-230US laptop HDMI output never fills TV screen

  Interface using HDMI Cable output on my HP G60-230US laptop (Vista and built-in by default Intel graphics software), the image on a LCD TV ever fills the screen - it is only about half as bigger than the screen.  This happens on two LCD TVs in my house - both a new LG 1080 p and an older Magnavox 720 p set. I tried to set the resolution of the screen pretty much all values listed, but nothing has worked.  I have another laptop (an old Lenovo T60p

  with a higher end graphic card), that has a DVI output.  When I use it with a DVI-hdmi cable, two TVs show the total size of the image.

  Any suggestions on how to get the output full size on a HP G60-230US hdmi TV?

  This is the case of the question, with graphics and display using HDMI to image...

  I see you have graphics card intel card... here are the steps on the scale manually to the top of the image...

  • Right-click on the Windows desktop, and then click graphics properties to launch the Intel graphics properties window.
  • Click the arrow next to the scaling and select Customize Aspect Ratio
  • Now move the slider beside the horizontal/vertical scale until the image fit to the screen

• Size of the Inspiron laptop power connector

  No one knows the size of power on new computers 3000 Dell laptops Inspiron 15 series connector? Old laptops Inspiron uses a size of 7.4 x 5.0 mm connector. The news that I have, which is a model 3225, is much smaller.

  Thanks for your help,

  Jim

  Thank you ejn63 and sparksdls for the quick responses, that's what I was looking for!