RTF generated using option table Pivot BI publisher but do not generate output when executed in ebs 12.1.3 simultaneous

Similar Questions

• Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?

  Computer crash xp pro have attempted to use the console to restore windows, but im not a good enough geek to type orders correctly is a more automated way to boot from the CD to reinstall the CD?  There is a lot of argument about deplacerb help pages the correct process and commands to use I don't want to do more damage.

  Thank you

  Hello

  I suggest you to visit these links and check if it helps:

  How to install and use the Recovery Console in Windows XP:
  http://support.Microsoft.com/kb/307654

  Description of the Windows XP Recovery Console for advanced users:
  http://support.Microsoft.com/kb/314058

  How to perform an upgrade on the spot (reinstallation) of Windows XP:
  http://support.Microsoft.com/kb/978788

  Check if that helps.

• All trying to deploy Linux VM model using PowerCLI, during customization in error that "do not provide dns when you create NIC mapping for customization with type 'Linux" ".

  All trying to deploy Linux VM model using PowerCLI, during customization in error that "do not provide dns when you create NIC mapping for customization with type 'Linux" ".

  See my response on the other thread where you posted the same question.

• I have install windows 8.1 and to use as a dual boot Linux, but linux not shown in boot pls help me

  Hi Acer, I use Acer V3 - 571G i5. I have install windows 8.1 64 and Linux 64-bit for use in dual boot, but linux not shown in boot pls help me. When I boot it shows only windows 8.1. In my computer the drive not present but is disc from the drive partion what linux installed shows as logical.

  Someone on the net says 'change the UEFI boot legacy '.

  but I can't have this option in my Woods, please help me where is and how to change...?

  You can't update 1.x to 2.x and you do not need.

  you just erase you the Ubuntu grub after windows 10 installation, follow the first link on the post of JordanB.

• Receipt used iPhone 5 as a gift, but can not access iCloud account to clear the phone.

  Hey Apple community. I recently got old iPhone to my uncle 5 as a replacement for mine, but he still all of its data on this subject. The email associated with the account is no longer active, he does not remember the password or the answers to security questions. I have no way to remove the phone bill, or in any case to disable find my iPhone so that I can factory restore. What should I do? Is there anyway to use my new iPhone? I would like to give any info that I can to be able to use my new phone. Thank you!

  Tell him to contact the account of Apple security team or with her and his original receipt to a physical Store. If none of these methods work, you will not be able to use the iPhone.

  (139031)

• Using of new 64-bit drivers, but DOES not connect Win 7 & TungstenE2. Help!

  After trying to hotsync over bluetooth on the new laptop with Windows 7 w / TungstenE2 and failure (serial port used by another application);  I downloaded the new 64-bit drivers provided in this message section. Problem now: no link could be established between the desktop and the device. Even if bluetooth is 'off' the device is now trying to use the bluetooth to non-working process. Tried the USB process, using the newly installed drivers. No connection.  It is now beyond my skills, and I'm in the circle of bluetooth, or the circle of 64-bit USB driver. I must be missing something!

  Have you set the Hotsync Manager to use USB on your device and the computer?

  What version of Palm Desktop are you using?  6.2 or 4.x?

  On the E2, open the Hotsync application and display the value.  It must be defined on 'Cable', not Bluetooth.

  WyreNut

• try to use easy connect to befriend isqlplus but does not

  Using the Easy Connect naming method
  
  of http://download.oracle.com/docs/cd/B19306_01/network.102/b14212/naming.htm#sthref783
  
  I want to connect to isqlplus remotely.
  
  Forgive me if I ask this stupid question,
  
  do I need to install the oracle client to use isqlplus. If Yes, then no need to answer the question above.
  
  I mean with browser without a doubt, I can reach the url, but when it prompts for the connection string, I try the replace by the
  
  
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = globalro-417667)(PORT = 1522))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = tomkyte)
  )
  
  so I wonder if I'm doing the right thing or not.
  
  Thank you!

  Hello

  See the link support entirely, the page which you referred it self says 'this chapter describes how to configure the connectivity information for client connections to the database server'. If the Client is required.

  Clients can connect to a database using easy connect server name if the following conditions are met:
  -Oracle Database 10 g Net Services software installed on the client.
  -Support for the oracle TCP/IP on the client and the database server protocol
  -No functionality requiring a more advanced connect descriptor is required

  Everything is there in the Document ORACLE.

  -Pavan Kumar N

• Is ' InstallSecurityCentral_787.exe really a file Mozilla or a Trojan or a virus carrier. He jumped two times while using Firefox stating I have viruses, but Comodo not agree!

  A window that is supposed to be a "Firefox security alert" jumped two times what opening of websites (not the same site each time) indicating that I have viruses by performing an analysis indicating there are 98 virus but list only 9 and indicating that I need to download a program called http:// swocmod InstallSecurityCentral_787.exe. it. Mrs.

  I am suspicious that it is a ploy to make me load a horse of Trojan or a virus and she would appreciate advice on the subject.

  I ran a test of the Comodo virus on the file and it came clean but it's a link charger and not the actual program is not surprising.

  A Comodo sweep on Friday, may 6, 2011 did not find the files listed by the alert?

  Cordially astralcc

  Edited to disable the link - Maurane

  It's not Mozilla, it will be malware, do not install it.

  There are many sites that will present you a security alert dummy trying to install the software. The real security alert Firefox you just warn you on a malicious site, it does not perform a scan or you notify that you have installed viruses and will tell you not to download any software.

• I need to uninstall the toolbar "many" - used Add/Remove in Control Panel, but did not firefox.

  I have installed a freeware no net program, said to alot toolbar, but it installed in all cases. I then went to the Add/Remove programs in the contral Panel, says delete, then he said is was uninstalled, but it is still in the firefox and internet explore BOTH. I love Firefox, but want the toolbar out alot. Help, please

  • http://www.alot.com/FAQ

• Cannot get my dell A920 printer to print using windows 7, it will scan but not print. It is said it can not print, but may not know why when troubleshooting

  I can't get my dell A920 to print.  It scans but does not print.  The reasons why CN can't find troubleshooting.  Help

  dosducexx,

  First run, delete print jobs to eliminate any print job stuck in the queue.

  Unplug the printer.

  Download and run the patch (cleaning printer utility) until it prompts you to restart your computer.

  Restart your computer. Make sure that the printer is deleted. Deleting Manual printer driver

  Download the 32-bit drivers for Vista for Windows 7 32-bit or 64-bit drivers for Windows 7 64 bit Vista. Install the Vista drivers in Vista compatibility mode, you will get a message, the printer is not connected. Connect the printer at the moment (power on).

  You will find links to the patch/drivers to...

  Owners of printer inkjet all-in-one Dell A920 thread (W7)

  Don't forget the programs anti-virus and firewall will block communications.

  Rick

• How to use "Routing Table" option in the Proxy in OSB service?

  Hello
  
  I created business services and Proxy in my console of OSB. I used the "Custom Query" option when creating the database adapter and I am passing a parameter to the query. My input parameter is 'name '.
  
  Based on the input for this parameter values, I spend a values corresponding to the query. By example, if I pass the following values to the input parameter "Name" (India) I need to spend "Value1" to my request.
  
  The India-> value1
  China-> value2
  America-> value3
  
  To achieve this requirement, I used option "Routing Table". I specified the values as follows: -.
  
  Expression - $body / fet:FetchCustDataInput / fet:Name
  Operator - '='
  Compare the value - India
  Service - "my Webservice.
  Operaton-"my Service operation.
  
  In the "application of Actions:" I added the 'add an Action-> processing e-mail-> replace' and provided the following values.
  
  Replace < XPath > = $body / fet:FetchCustDataInput / fet:Name
  Variable = 'name '.
  with the Expression = xs:string('Value1')
  and the "Replace the content of the node" option selected.
  
  No validation error I encountered. I created the routing table in the Proxy service. But when I try to run the service proxy in my Test Console, I get the following error
  «The call resulted in an error: an unknown error during the processing of the message of service ProxyService OSBQueryService/FetchByCustomQuery/FetchByCustomQueryPS.»
  
  I even activated "Direct call" and 'Include Tracing' options as well. The message in "Tracing" give "(echo request)
  Routed service. No Service has been invoked, echoed the demand. ».
  
  Can someone please help me solve this problem.
  
  Thanks in advance,
  Udaya

  Hi Marion,.

  Replace = $body / fet:FetchCustDataInput / fet:Name
  Variable = 'name '.
  with the Expression = xs:string('Value1')
  and the "Replace the content of the node" option selected.

  Above replace the action is wrong. It should be like -

  Replace = $body / fet:FetchCustDataInput / fet:Name
  Variable = body
  with the Expression = xs:string('Value1')
  and the "Replace the content of the node" option selected.

  Kind regards
  Anuj

• How the XML element used in RTF PUBLIC/PRIVATE? I know how to hide columns in RTF, but do not know how to generate xml below way. Help, please.

  Hello

  I'm following link below to show/hide my columns dynamically. See "formatting of column.

  http://docs.Oracle.com/CD/E12844_01/doc/BIP.1013/e12187.PDF

  According to the doc element can be made in private/public.

  <items type="PUBLIC">
   <item>
    <name>Plasma TV</name>
    <quantity>10</quantity>
    <price>4000</price>
   </item>
   <item>
  

  And even can be used to hide the column with the help of State

  <?if@column:/items/@type="PUBLIC"?>
  

  MY QUESTION IS HOW TO DO THIS IN MY XML BELOW?

  Here's the part of my XML code that I use in the definition of the data to RTF.

  <group name="GH3" source="QH3">
  <element name="COLUMN_HEAD3" value="COLUMN_NAME" /> 
  </group>
  <group name="GH4" source="QH4">
  <element name="COLUMN_HEAD4" value="COLUMN_NAME" /> 
  </group>
  

  I'm out like that.

  <LIST_GH3>
  <GH3>
  <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
  </GH3>
  </LIST_GH3>
  <LIST_GH4>
  <GH4>
  <COLUMN_HEAD4>XYZ</COLUMN_HEAD4>
  </GH4>
  </LIST_GH4>
  

  In order to use the logic according to the oracle document I want output like this.

  <LIST_GH3 type="PUBLIC">
  <GH3>
  <COLUMN_HEAD3>REBILL_TO_OTHER_BUSINESS_UNIT</COLUMN_HEAD3>
  </GH3>
  </LIST_GH3>
  <LIST_GH4 type="PRIVATE">
  <GH4>
  <COLUMN_HEAD4>BLANK</COLUMN_HEAD4>
  </GH4>
  </LIST_GH4>
  

  Should what changes I make in my XML to get the result of the execution as above? Help, please. Where should I make changes in the XML above? Name of the Group? Name of the element?

  I intend to use it under condition in RTF model to hide the column, but do not know how to set the column as PRIVATE/PUBLIC type in the XML output that is used to populate the data in the RTF while running.

  <?if@column:/BTSPIEXP/LIST_GH3/@type=”PUBLIC”?>COLUMN_HEAD3<?end if?>
  

  Kind regards

  Patricia K.

  Hello

  Problem has been resolved. I used the value of the item to determine whether to show it.

  Kind regards

  Patricia K.

• GPF using the Table control

  Hello world

  We use a table control to display the log files. Each row of the table represents a log file entry. In addition to that we have put in place

  Some filter chopsticks (string tonalite) to speed up filtering. This means that only the entries corresponding to these substrings are shown. So whenever the filter options

  changed to renew the contents of the table.

  This is done by DeleteTableRows, looking for entries to display, InsertTableRows and SetTableCellRangeVals.

  It works very well.

  But if we remove all the contents of the table (caused by the filter options) and then hit a button (even if the focus is on the table) you get a GPF on ProcessSystemEvents.

  This occurs only after inserting a large number of rows in the table before deleting all the. For example, a table with 5000 x 2 (rowsxcolumns) reduced to 0x2.

  1 create a table with 5000 x 2 (rows x columns) control elements.

  2 remove all lines

  3. press tab until the control panel to get the focus.

  4. hit Enter for example

  => Crash

  Someone has an idea? We have already 'dimmed' CTRL, but this is not enough to avoid that the focus on the table by pressing the tab key. So, which leads to an accident as well.

  Thanks for the help

  Philipp

  Yes, it is a known issue (396240), although it is not actually on time last updated known issues. Unfortunately there is no good solution, other than just by waiting for a version corrected to be released, which should happen soon.

  Luis

• Can you attribute programmatically size when you use the table in the Cluster service cluster

  I use the table of the Cluster service.  The only way I know to the size of the cluster is to right click on the function and set the Cluster size.  But what happens if the length of my table changes?  Is there a way to make the cluster size is the number of elements in the table?  Seems like labview should do this automatically at run time.  There may be some nodes of property I don't know.

  I tried the SQL statements, but it always boils down to having to know the number of columns is in the database prior to execution.

  What I did to generate the object to be a cluster to match database fields.  My recordset is an array of objects.  Then I a vi member to build a recordset from the database and another Member vi to retrieve an array of clusters of the recordset object.  If the database changes, I have to change the subject and these two vi.  All the other Subvi call these two for the manipulation of data.  No other sub - VI have bundle and ungroup functions in them, only the vi of two members.  Thus a change in the database requires a change of control and two vi.  Not too bad.

  (I'm tooting my Horn in choosing me as accetped solution provider.  I learned this bad habit of others here on the forum.  )

• How can I resize a table directly (without using the table to remodel)?

  Hello world

  I have a porgam in which I use a table as a command (with specific values that goes from the user before running the program). By mistake at the beginning, I created a table of 4 dimension (for example), but I didn't because I was showing only the first 3 values (not to expand the table to 4 or more). I would now like to change the size of the array of 4-3. I don't seem to be able to find an option (right click on the table) which allows me to do so directly. I don't want to use the icon "reshape the table", because it is not what I want to do. I hope I am clear enough.

  Thanks for any help,

  Kind regards

  Marc

  • Right click on the additional array element, then... Select 'delete data operations.
  • Now go to the menu bar and not "current default values edit..make'
  • Save the VI.