OIM 11 g - connector for PeopleSoft - Recon events dated future

Similar Questions

• Connector for PeopleSoft IT resource configuration

  Hello
  
  I'm creating the connector of PeopleSoft in IOM and fell on incomplete documentation of the Oracle. I followed the installation guide named "Oracle® Identity Manager
  Guide of connector for the reconciliation of the PeopleSoft employee
  Version 9.1.1
  E11205-06"
  
  In Chapter 2, section 2.2.1.3 Configuration of the resource, the guide shows only 2 parameters (Configuration Lookup and IsActive).
  
  The TFTP connector in console design shows several parameters to be defined. Some of them already have some default values. Some of them are empty and they are:
  
  Admin
  AdminCredentials
  Location of the jar file
  URL of Jolt
  Class definition of Native connection pool
  
  What are these parameters and what to put in? Do I need to change the default values are already set?
  
  Thank you
  
  Khanh

  Well you should see the first name field in the fields of treatment. If you have made this field to IOM, but you don't tell IOM for updating the IOM user profile name with this value. Do it as below:

  -Go to the Process Definition of PeopleSoft is used if it exists, otherwise open User Xellerate process definition.
  -Go to reconciliation field mappings tab.
  -Click Add field map. Select field Name = name (your RO attribute) and select user name = attribute (attribute of IOM)

  Give it a try. You will be through.

  Thank you

  Sunny

• PeopleSoft UM connector vs PeopleSoft ER connector for recon approved and commissioning

  We have a requirement of the customer where we integrate PeopleSoft with IOM as a reliable source as well as the provision of a couple of attributes to PeopleSoft. We examined the two choices of different connector that offers Oracle - PeopleSoft User Manager Connector and PeopleSoft employee reconciliation. Documentation, it looks like Oracle recommends the ER connector for the purpose of reconciliation trust. However, the UNIFIED messaging connector is used for provisioning the target and reconciliation.

  However, we need a connector for the two reconciliation trust as well as the provision of a couple of attributes to PeopleSoft. Or the other of these connectors is obtained two features? What connector do you recommend for our use case?

  Kind regards

  Sreejith
  

  It depends on.  If you need the HR component of the information and the data of the PERSON, you will need to use the connector Peopleosft ER of reconciliation trust.  If you do not need the data of the person and that all your users are stored in the application (which I highly doubt), then you will want to install the connector Peoplesoft UM.

  The situation that you're probably looking to set up is reconciliation using recon ER of Peoplesoft to retrieve users and their data from the PERSON.  Then you would provide the user in your Instance target of Peopleosft with UM Peoplesoft connector.  When you put them in your target, if I remember, when you provide us with the type of user as an employee, he will be asked to provide their user name which will connect target their instance to their instance of human resources in the back-end.

  -Kevin

• OIM11gR2ps2 how to use OID - 11.1.1.6 Connector for updating a user that has been created through LDAPsync?

  Hello

  I have two connectors configuration, a database connector generic to an Oracle database that the provisions of a user account (it works fine). The second connector, I am still getting set up properly is a LDAP connector specifically OID - 11.1.1.6.0.

  Use case:

  A user creates an account through automatic recording and is created simultaneously in OUD ldap with the johnDoe1 username. johnDoe1 connects in IOM and asks an instance of application called DBAccount. They fill out the application in all there information (user ID, fname, lname, phone, address, title, etc.). Once they support demand goes through the necessary approvals and after that it's approved successfully the info is put in service to the database. Once this operation has been successful, I would like to provision an update a users ldap entry that was created in the custom attribute ldapsync is called OUDappusername, this attribute is an attribute with value mutli because if demand for the other apps, they will be updated in the OUD aswell. This OUDappusername will be generated by an event handler or to pre-populate the plugin and the format will be "app |" user name' where app is the app they ask and User_name is the user name they use to connect to the IOM, for example "DBAccount". johnDoe1. If they keep asking other apps they will be updated in the OUDappusername so that they may have DBAccount | johnDoe1 and ask another application called app2, then they will also have app2 | johnDoe1 and so on.

  Is this possible with the connector and how do I set it up to users update rather than set up a new account in the OUD?

  The question:

  I currently have the configuration of connector so whenever I have set up a user creates a new user rather than allow me to simply update a user. It is possible to configure the connector for updating existing users is born through ldapsync, rather than those created through the app instance configuration. I have found no documentation on that.

  Thanks in advance,

  J

  Edit #1 - I changed the wording and added more details.

  Edit #2 - I reworded my question to be more specific and focus on a single issue and changed the title to be more specific.

  Post edited by: 6d986dc3-6c9b-401d-9892-76032e7a1e05 on April, 07/04/2014

  Hello

  I just wanted to post what we found the answer. We did not use the connector, but what we did was we created a custom, adapter, which is a small and associated java class then new task in the process definition for the database resource in the console design and we made calls to jndi for the ldap Protocol to update this attribute multivalue. It was very quick and easy and could be tested before the implementation of the IOM. Thanks again for all the help and talk me through the procedures.

  Thank you

  J

• OIM 11 G R2 AD trust Recon

  Hello
  
  I ran an AD Trusted Planner Recon, it succeeded. But I am not able to see users.
  
  I checked the approvals pending and open tasks, but I can't find.
  
  Please suggest
  
  Thank you
  Combet

  For the work of the trust AD user, the only thing you need to do is modify search configuration to "Trusted" an inside resource setting. (is that what you did any other change?)
  In the recon event, check if the required attributes are missing

• SOGo connector for Thunderbird

  Hi all

  First of all, I hope that this question was not asked again; I'm sorry if this is the case.

  In fact, after Zindus reached its end of life a year ago, I'm looking for a new way to sync my contacts, managed by Zimbra with Thunderbird.
  In this context, I would like to know what the community Thunderbird SOGo connector for TB (http://www.sogo.nu/fr/downloads/frontends.html). In particular, why is this add-on not installable via interface of Thunderbird?

  Thank you very much in advance for your help,.

  See you soon,.

  Neirda

  Safety is always a difficult question to answer. Certainly the stuff to Add - ons.mozilla.org (AMO) go through a process of code by the moderators control it. But source code is everywhere and the review is effective to the person conducting the review the day. SOGO is an established project open source, so if security is really something to worry about, you can always hire someone to browse the source code. That's what AMO. On a personal note I don't have a lot of concerns about the safety of SOGO simply because it is open source, the code can be examined and it would be a brave project hat would mess in their own nest with malware etc in their package.

  However, the connector is only a part of the package of SoGo, a tool to connect to their server of groupware software. A live demo which can be accessed here http://www.sogo.nu/tour/online_demo.html the fact, that it can be used for other things is really just a bonus for the community as a by-product of them use standards based protocols.

  On a practical level several antivirus editors insert anti-solutions modules Thunderbird when you install packages. Here's what your informal appeal as well (they are not on AMO). Given that many of them intercept and decode encrypted SSL communications, I'd be more concerned that they have a backdoor to three letter agencies and I would be on the sogo connector. My trust in the internet privacy died a long time ago! but I still trust free unless there is some reason not, simply because the source code is available.

• How to delete all pictures once I transfer them into an album for a particular event

  Is there a way to remove photos of all the Photos after their transfer to a newly created for a special event album.  It makes no sense to do them in two places, but I can't find a way to do it.

  The photos in the Albums are not actual copies, they are just pointers to the original photos still residing in all the Photos or film. If they do not take an extra storage capacity.

• HP Compaq mini 110 c-1010ER: Connector for SIM card in the laptop

  My friend gave me a Compaq mini 110 c-1010ER. Looking at, I found the connector for the SIM card. I inserted the SIM card, but the system does not detect. Please help to run it.

  I tried, but on Windows 8.1. I install Windows XP and try it.

• Satellite A100-033 - where to get the cable/connector for power switch?

  Hello

  I change the cable/connector for * power switch button * which connect to motherborad. If anyone no where I can get in? I tried at PC world, but they do not have cable, I am looking.

  My laptop SPAC:

  Satellite A100-033 part number: PSAANE-03J02GEN

  Thank you

  Hi rjbuz,

  I can t tell you the part number because I m not the owner of the Satellite A100, but a service provider authorized in your country can do this:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Just give them a call and ask. Maybe they can send you the replacement part. :)

• Where to find connectors for map plugin SMU

  Can anyone help with information on the XP4/XJ4 connectors for SMU: numbers of appropriate provider type?

  We want to make a personalized card to plug into a chassis SMU-1071 - but only a need the 3.3V power supply to the chassis. But after a long search, I was unable to find a number type for this connector. XJ4 is the smallest but of course all types of connector will do as they have all of the power pins.

  Hello the heel.

  I searched in our internal documents, and according to my findings we use ERNI as a manyfactor for our connectors.

  ERNI

  Also, since you want to design for own PXI card, you might be able to find useful information in the PXI specification.

  PXI systems Alliance

  I hope you can use this information.

• Events unregistering on a cluster without Unregistering for all dynamic events

  Hello everyone

  I've been playing with dynamic event record but I hit a problem.

  Normally if I want to stop triggering events on a single control I will be wire constant ref with the correct type in the registry for block of events. This means that I don't have to use the unregister for events block and then rebuild the entire events list to registry when I only want to stop the events on a control.

  However, if I try to bring together a group of the refs (which cannot necessarily be of the same type) in a cluster then I can no longer cancel the events on this cluster registration from the register of events work a group of control constants.

  An alternative would be to use an array instead of a cluster, but this has two disadvantages: it does not create a case of dynamic event for each Member of the array and all controls must be the same type or they are co-erced to a more generic control class.

  I've attached an example VI (labVIEW 2011 SP1)

  I think I finally get the problem now.

  You need feed two references in separately.  You can cluster the registry OUT for events, I know, but I don't think that what you want will work.  You know that you can enter the tables in a table instead of a cluster, right?

  Shane.

  PS to be clearer.

  Register to activate your button separately from the rest.  Save all your "to be marketed" references - individually, not clustered - in a second 'register to events' and then together the two outputs (with the Save refnums event) before passing into the structure of the event.  You might have what you want.  So big cluster AFTER signing up, not before.

• remote desktop hang at 'Please wait for the system event notification' during logoff

  When I disconnect a remote connection, sometimes the GET logoff screen stuck at "Please wait for the system event notification" next time I try to open a session.
  This can also happen if that I disconnect the user, but the user seems to weigh on this same screen as well.

  There is a particular difficulty for this?  I can connect as long as administrator to another account, I can't kill connection attached somehow to be registered in the next time?

  Thank you

  Hello

  I suggest you to take a look at the answer in this thread and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Sens-could-not-connect-to-the-system-event/4e5a04e9-88f8-4017-9416-2ca67c5ce7c5

  Hope this helps,

• Trying to register for a developer event SW in Finland. But the record window disappears before saying what happened.

  I am trying to register for a developer event in Finland using MS Live ID SW, but disappears from the record window before saying what happened.
  What should do? Contact person?
  The event is called 3 Amigos & Gal.
  Called MS Finland - person seems to know, they move me just for the next person. Who knows the support to developers?
  PS. It was the support person of the Finland MS who advised me to use this site.

  Hello

  If the problem is specific to Firefox, then I suggest you to send your request to:

  Firefox Support Forum

  http://support.Mozilla.org/en-us/questions

  You can also connect with Firefox for known problems.

  http://support.Mozilla.org/en-us/home

• Where can I buy a hard drive enclosure and a connector for a second hard drive for my dv7-7190eo?

  Where can I buy a hard drive enclosure and a connector for a second hard drive for my dv7-7190eo?

  Gurra wrote:

  Where can I buy a hard drive enclosure and a connector for a second hard drive for my dv7-7190eo?

  Hello

  The right part for the hard drive kit is 681976-001. The website of the laptop stand is on HP Sweden so run on google.co.uk part number (or your Swedish). I found the cheapest on us amazon for $38 or £42.

• Connector for Windows RT

  Hi, is there any news on the connector for Windows RT? I use a such Tablet for a while now and I really miss the function in order to use our environment vd. Best regards, Martijn (vggm)

  Hello Martijn,

  Unfortunately, currently we don't have a release date for connector Windows RT, but it has already been brought to the attention of our development team.

  Best regards

  Murat Coskun