OIM 11 g Double supply

Similar Questions

• I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What is the EULA

  I'll buy Adobe Creative Suite 6 Master Collection from a discount supplier and observe to install on my laptop and desktop PC (which is for my use only). The vendor said that there is no provision of the EULA to install double. What does the EULA say?

  A single user license allows you to have two machines with enabled facilities.

  Licensing and terms of use | Adobe

• I can do that double-OIM 11 g R1 to emails?

  Hi, in my organization, we need OIM 11g R1 allow duplicate e-mail addresses...
  I have not found where I can disable this restriction...
  any idea?
  Thank you.

  Yes, you can update the system property called: IOM. EmailUniqueCheck. Related: agglomerates E-mail must be validated for uniqueness

  I hope this helps.
  Leoncio Thiago.

• Z620: Z620 with supply unions 970 GTX double

  Hello

  I bought a pair of MSI GTX 970 games 4 graphics cards of G with the idea of installing in my workstation for GPU rendering.

  I was looking at the connectors power and noticed that two 5 connectors.

  Each 970 GTX requires a 6 pins and a 8 pins.

  I was wondering, do I need an adapter to make the 5 pins for a 6 pin?

  And also, I am able to install two graphics cards in the system? I just need to add extra power cables?

  Any help would be greatly appreciated.

  Thank you

  Hi Brian1965,

  Thank you for your reply and information, it was very helpful.

  I had a quick glance around forums, if you take a look at this link... http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091/highlight/true#M12740

  The thread talking about each individual cable offering up to 216W of power. My two graphics cards are valued at 145W each. If I would be able to use an adapter to convert the 1 6-pin 6 + 8 cables to power a single card, so I would be able to install both?

  I found this adapter, but I was hoping you might be able to advise whether it would work or not?

  https://www.Reichelt.com/?language=en & CTYPE = 0 & MWSTFREE = 0 & CCOUNTRY = 447 & ARTICLE = 160848 & PROVID 2788 = & wt_guka = 22596806657_79177386257 & PROVID = 2788 & gclid = CMKQ2oizvM8CFRMTGwodN3YFyA

  It would be my first time changing graphics etc so I'm not completely clued up on what I would need power wise.

  I asked a local IT guy but he could not help because of not enough information (guess he won't be held responsible if he broke the pc)

  Thank you

  Dan

• Double video cards

  I have the video card from AMD Radeon 7950 / 3GB with 3 monitors has 30' and two of 24.  Would I be able to add an another 7950 to help speed up the video rendering?  And not to add another monitor.  Or should I replace the video card for two cards video that would be equal to 3 GB?

  Yes, you can add another video card, however, I think that the 7950 requires two power connections to THE and the MP has only two connections. You probably need to add another power supply

  NG-a-second-GPU-w-w-o-soldering.1460429/ http://forums.macrumors.com/threads/How-to-Rig-a-2nd-PSU-for-Modern-GPUs-or-addi

  Also if you install two cards double width, you will have only one slot of card available.

  Tip: Mac cards replacement Graphics Pro money Tour (2006-2012)

  http://www.macvidcards.com/index.html

• Mini display to HDMI adapter double link

  Can I use a mini display HDMI Dual link adapter to connect 3 HDMI TV to a Mac Pro?

  I never heard of a "Mini display Dual HDMI link.

  There are double-ling mini displayport > DVI adopters as the double bond is required for DVI so a resolution higher than 1920 x 1200.

  You can get the dispatchers who will share a single HDMI into two identical signals. You may be able to get one which divides into three signals. A power supply may be necessary for a this type separator

  A dispatcher will give identical screens on each monitor.

  What model Mac Pro?

  What card graph (s) installed?

  Want a different output on each monitor?

• Equium A60 power supply insulation question

  My laptop recently failed a PAT to trial because of the continuity of the Earth. For background, it's a laptop bought UK but I am running an advance Australian 3-pin into the power adapter as I am in Australia.

  I saw somewhere on here that standard satellite UK does not connect through the Earth and I wonder if someone can confirm the preference for an official title, because I believe that this is the cause of the problem, but it doesn't seem to be, for example, a symbol 'double insulation' on diet, nor the manual referred to - the laptop works very well and I have no reason to suspect the power supply are faulty.

  So wonder if it actually has a pin plug 2 (UK power points need the same if taken earth it is not connected, Australian points are not).
  I really need to resolve this issue I need to use my laptop on the site, but can't until he gets that agreement and I do not want to get a new (OEM) power when I do not think the existing one is broken, so I need something to test guys and show them that it is a normal behavior...

  Of course, if this isn't normal behavior, I would be better to know now!

  Thank you

  I Don t think that the power supply is broken, and it doesn't really matter what the wall of the AC cable is connected from the regulated AC adapter voltage by itself and has it s own ground.

  Maybe the PAT test fails, but food is not broken.

  Welcome them

• Light flashing orange and double beep at startup - Tecra M1

  Hi guys,.

  I have a Tecra M1, which starts with a double beep, which continues for almost a count of 28 or 30. At the same time between the power lights and the battery light flashes to the rhythm of 6 seconds on and 6 seconds off. Nothing else happens.

  Where can I get information about such error codes only displayed by these symptoms?

  Any help would be appreciated.
  Thank you

  Hello

  Unfortunately there is no public record of these codes. What happens when you try to start your Tecra without battery and connected to the power supply current only

  What I know for sure, is that when the microcontroller detects certain defects in the power supply flashing code will be sent. You can not do anything alone. Contact the partner Service of your country and you ask what is the best solution.

• Double screen Enquiry

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  philiom wrote:
  

  I have a Compaq Desktop model number: SG3-250UK and glancing to the establishment as a double screen, search on the web, but had no luck trying to find one, I am sure they must be available, can anyone help?

  The only upgrade to the video that you can install is a PCI Express x 1 video card with two video.  The card must be a low-profile PCI Express x 1 video card (with 512 MB or less VRAM) that there is no PCI Express x 16 slots on the motherboard. For a card with VRAM than an upgrade of the power supply must be considered as your original power supply is only 180W. Who does not have capacity to a level that will attract a lot of current.

  Best regards
  ERICO

• Double layer burning fails every time - Tecra A9

  Hi all.

  My Tecra A9 is equipped with Teac DVW28ECT (Rev7.5A) I have no problem burning on a DVD single layer... but EVERY time I try to burn to a double layer process stops about 25% in the burning process.

  I can't find more recent updates of the driver/firmware for the dvd drive. I tried all brands of disk...

  Burning programs I use are up-to-date and are great for double layer / DVD9 disc production.

  Any advice of members who can help would be EXTREMELY appreciated!

  Hello

  I checked the manual and there is info that the laptop support DVD + R DL and DVD-R DL (format 1)

  But certain types and formats DVD-R DL and DVD + R DL disc may be unreadable.
  Also the DVD-R DL can be burned using the 2 x speed and the speed of 2.4 x DVD + R DL.

  Please see also the 90 user manual page.
  You will find information on tested DVD DL disc that are compatible with this laptop.

  Notes; the companies mentioned in the user manual are disc manufacturers one no suppliers!

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• Replace the power supply, computer does not turn on

  I had a Seasonic SS 560 KM power supply for my HP Pav e9280t.  I removed the old power supply while keeping the power cable is plugged in.  Then replaced each power cables one at a time in the new power supply and finally he attached to the tower.

  Now when I try to turn on your computer, it just boots barely upward.  I can hear the fans kick on for a second or two, then everything just stops.

  Since I replaced the cables one at a time I don't think I missed anything; MoBo, Fan of MoBo, 1 optical drive, disk HARD 2 and 1GPU.  The tower is open and I can see the fan, the fan GPU MoBo and PSU fan all hang on one second so that they get the right power?

  I must have missed something or possibly faulty PSU?  Any help will be appreciated.

  Hello Chadow86, it is possible to the new power supply may be faulty. I would check double all the connectors again.

  Since you mentioned the fan to the motherboard, it would not be necessary to unplug the CPU fan when you changed the power supply. The CPU fan power source comes from the motherboard and not directly from the power supply. I don't know what fan on the motherboard you are talking about.

  I watched the specifications and photos of the new power supply. It is a modular design. I would check the cables connected to the power supply to make sure that they are in the correct connectors.

  If the system still does not start, the cause could be a new power supply faulty.

  I hope this helps.

• Replacement of a power supply

  Hello my dear

  before you ask for help, I want to thank you for the greatest Pc you guys offer they are really powerful and impressive

  in any case I'm now looking forward to change the power supply (that I bought the pc of a black market)

  and my pc is HPE-026sc, I'm going to buy a new suplply of power which is a Corsair and told me that not all cases of pc can adapt with each power supply (or at least the best of them) that's why I'm asking for help and tell me before I buy a power supply if it will go up with the pc case I had it or not
  and I thank you in advance

  Oh an by the way that I saw in the site that the pc comes with a 8 GB memory and a graphics from nvidia gtx + 460 Watt power while the I bought it has only 4 GB of memory and a 8800 GT (I know I got a black market so I have to accept what I got inside the computer) I would get quick assistance because I don't can't wait I want to play games as I am an addict Cheerz.

  Hello

  The Sapphire 5770 that you posted the picture for should match as much as the adjacent PCI-E slot on the PCI-E x 16 in your PC slot is vacant.  The card is 8.5 "in length, but it's double wide.  It is now time for you to open the PC and measurement.

• I am trying to intensify on my power supply by a factor of 1V. Can someone tell how can I do?

  I'm using labview 8.2 and try to make a loop where I have to increase the tension of my supply(3631a) of the power by a factor of a. And this increase leads to my other devices (34405 and 34401) as well.

  Also include a copy.

  Double Post.

  Please don't ask the same question in multiple threads.

• Power supply upgrade Question

  Hi all

  This isn't a typical question. I read in all directions for an answer with nothing doesn't. I have HP Pavilion A1560n, which comes with a power of 300W. As most of you know, HP uses ATX power supplies and so for me to original power level, I need to know if the upgrade of power must be for the rail voltage 12V or 5V voltage rail. You're probably wondering the reason for the upgrade, and it's because I have a lot more hard and readers of DVD RW that I need to use this system. Think of this system as a station of mini Server (admittedly not the best system for this) If you want.

  With hard drives, one might think that the new power supply should have a higher on the 12V rail power. One could argue that the ATX V2.3 is also a good choice here because it has more than one 12V rail and retro-compatible with ATX. However, the fact that 2 different HP technicians mentioned that I need to upgrade is the power rail 5V me puzzled. A third technician just told me I need more power from 12V every power that I have met has more power on the 12V rail, except for the couple who had the same amount of power of 12V as my original power supply and many more the 5V power and the 3.3V rail.

  Could you please refer me to any documentation that could enlighten us in what route to go? Should I get an ATX upgrade that would increase the power on the 5V and 3.3V rails or V2.x ATX which will increase the power on the 12V rail.

  Thank you

  Jim

  Won't you Dear?  How about $ 45 for a Fortron 600W with 80 + cert?  $ 35 yesterday with a $10 OFF coupon.  This unit is 580W for 12V output rate.  No need to worry about the modern 3.3 and 5V rails with PC since the maximum load will be less than 100W.  This device does not have no problem of transverse load... which means that the system can take as little as a few watts on 3.3 and 5 v rails and still be able to get close to 600 w total power.  You can buy the adapter to convert SATA connector Molex, or vice versa if you have plenty of HARD drive.

  This power supply has three independent 12V rails, each rated up to 18A.  Say staying us cautious and rates from the coast to 16A by rail, one call always load to the top of each tubular structure with eight drives.  The processor and the motherboard to sit on the other 12V rail and you can put a high range GPU and a few additional hard disks on the 3rd rail.

  The HP tech skill level can vary considerably.  Great people work cheap, so if you want good advice, then you should put these questions to the hardware enthusiast forum.

  Let's take a specific example for illustration.  I have a WD 1 TB green drive on my test bench.  The label says A 0.70 @ 5VDC (3.5W) and A 0.55 @ 12VDC (6.6W).  Eight hard drives would put on 28W load on the charge of rail and 5V on the 12V rail 53W.  Double this amount if you want a sturdy margin of safety.

  Your PC will probably rely on 180W peak due to the older Intel CPU.  I doubt that you will have no problem to start six drives on the PC with the stock power supply.

  http://www.Newegg.com/product/product.aspx?nm_mc=AFC-&cm_mmc=AFC--_-na-_-na-_-na&item=N82E16817341010&CMP=AFC-C8Junction