OIM 11 g R2-problem when setting up field of IOM in weblogic

Similar Questions

• Rendering problem when setting ChoiceBox elements with a service

  I am preparing some examples to show the various features of FX when I came across this strange issue. I use a javafx.concurrent.Service to populate the items of a ChoiceBox. When I click the ChoiceBox to display a list of choices, I get only a blank rectangle with a triangle drawn on top. It's only when I click on the triangle the ChoiceBox gets correctly redrawn. From what I could see in the debugger is that the elements are there at the time when I click on the ChoiceBox.
  

  final ChoiceBox<String> choiceBox = new ChoiceBox<>();
  ExampleService service = new ExampleService();
  service.setOnSucceeded(new EventHandler<WorkerStateEvent>() {
       @Override
       public void handle(WorkerStateEvent aEvent) {
            ObservableList<String> tempValue = (ObservableList<String>) aEvent.getSource().getValue();
            choiceBox.setItems(tempValue);
       }
  });
  service.start();

  Screenshot: [url https://dl.dropbox.com/u/8978331/ChoiceBoxRenderingProblem.png] https://dl.dropbox.com/u/8978331/ChoiceBoxRenderingProblem.png
  Code example: [url https://dl.dropbox.com/u/8978331/Example2App.java] https://dl.dropbox.com/u/8978331/Example2App.java
  
  I'll write a Jira issue for this one, or is it my fault?
  
  I use 1.7.0_10 - ea - b13 on Windows 7 64 bit, but same problem occurs on Mac OS X.
  
  (PS: I could also use binding to accomplish this task, but unfortunately the RT-22449 prevents me to do).
  
  Published by: Thilo 13 November 2012 10:57 to repair broken links

  Looks like a bug to me. It is not related to the use of a service (or multithreading): the code below suffers from the same issue.

  import javafx.application.Application;
  import javafx.collections.FXCollections;
  import javafx.collections.ObservableList;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.control.ChoiceBox;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class ChoiceBoxTest extends Application {
  
    @Override
    public void start(Stage primaryStage) throws Exception {
      primaryStage.setTitle("Example 3");
  
      final ChoiceBox choiceBox = new ChoiceBox<>();
      final Button populateButton = new Button("Populate");
      populateButton.setOnAction(new EventHandler() {
  
        @Override
        public void handle(ActionEvent event) {
          ObservableList tempValue = FXCollections.observableArrayList();
          for (int i = 0; i < 10; i++) {
            tempValue.add("Item " + i);
          }
          choiceBox.setItems(tempValue);
          // This will work:
          // choiceBox.getItems().setAll(tempValue);
        }
  
      });
  
      VBox root = new VBox();
      root.getChildren().addAll(populateButton, choiceBox);
      primaryStage.setScene(new Scene(root, 300, 250));
      primaryStage.show();
    }
  
    public static void main(String[] args) {
      launch(args);
    }
  
  }
  

  To work around this problem, replace

  choiceBox.setItems(tempValue);
  

  with

  choiceBox.getItems().setAll(tempValue);
  

• How can I remove a (problem when setting up a Repeater) network extension

  Hello

  When I tried to installed a Repeater (TP-Link, TL-WA901ND) of my iMac, it did not.

  But since then, my wifi name double in the list. And none of these two works...

  We installed the Repeater from a different computer, but now I'm the only person who is not able to connect to the network that we share. Probably due to mishandling, I did when I tried to install the Repeater of my imac...

  Do you know how it is possible to remove only the two networks of my system / list and restart from the beginning?

  Thanks a lot for your help!

  Have you tried to reboot your router with the Repeater of the dead fire? Or if all else fails then reset your router to the default settings, and then start over completely.

• Problem when setting brightness of the screen in Windows 8.

  I use Windows 8 Pro.

  System Specs:
  * HCL ME laptop, series 1114
  Description: I can't adjust the brightness of the screen, I tried to use the keyboard shortcuts provided as well as the power options in the Control Panel, but no effect. The cursor goes to 0, but the brightness of the screen remains the same.

  The problem is with the INTEL HD graphics driver that you have downloaded from the site Web HCL. However on the installation he States, it is compatible with Win8 but in fact, it is not.

  The same problem is faced with one of my friends on the same model HCL 1114.
  I suggest you go ahead with the value by default WIndows and uninstall the Intel HD Graphics driver
  Graphics driver and everything works perfectly.
  Referring to Intel Driver download section they distribute the library to OEM (HCL) may be you
  should try in the near future to obtain the effective execution of the Intel HD graphics driver

• Problem when setting the option of delay in delivery on JMS

  Hi, I am trying to set the option of delay in delivery over JMS, but it does not work. For this I used the following code:
  
  Private Sub queuing (message from InterfaceMessage, int priority, Boolean isLog) {}
  QueueConnection queueConnection = null;
  WLQueueSession wlQueueSession = null;
  WLMessageProducer wlMessageProducer = null;
  ObjectMessage, objectMessage = null;
  delay = 5000;
  try int = 5;
  try {}
  queueConnection = connectionFactory.createConnection () (QueueConnection);
  wlQueueSession = (WLQueueSession) queueConnection.createQueueSession (false, Session.AUTO_ACKNOWLEDGE);
  
  Logger.info ("\tMessageManager.queuing--> FRONT RedeliveryDelay: {} - delay: {}", wlQueueSession.getRedeliveryDelay (), delay); * //Here the newspaper prints 0 - 5000 *.
  wlQueueSession.setRedeliveryDelay (delay);
  Logger.info ("\tMessageManager.queuing--> AFTER RedeliveryDelay: {} - delay: {}", wlQueueSession.getRedeliveryDelay (), delay); * //But here, the newspaper prints still 0 - 5000, instead of 5000-5000 then why is the value set is not respected? *
  
  wlMessageProducer = wlQueueSession.createProducer (interfaceEXPRESSMessage) (WLMessageProducer);
  wlMessageProducer.setRedeliveryLimit (attempts);
  objectMessage = wlQueueSession.createObjectMessage (message);
  wlMessageProducer.send (objectMessage);
  } catch (Exception exception) {}
  Logger.Error ("MessageManager.queuing-> Exception - msg: {}", objectMessage, exception);
  } {Finally
  try {}
  wlMessageProducer.close ();
  wlQueueSession.close ();
  queueConnection.close ();
  } catch (Exception exception) {}
  Logger.Error ("MessageManager.queuing-> Exception - msg: {}", objectMessage, exception);
  }
  }
  }
  
  Could someone advise on how to fix this?
  
  Thanks in advance!
  
  Published by: cbustamante on April 29, 2011 10:54

  Configuration of the period of delivery and return limit can also be set programmatically (using WLST script or java mbeans), so if these settings change infrequently – say once a day – then mbeans could be a good approach...

  Can you explain more about what you are looking for? Your original question was late redelivery, no delivery deadline. It looks like delivery limits can be set for producers - as directed by the javadoc I mentioned above, and delays can be set on the sessions of consumers (no effect on the producers from the same session).

  An MDB does not provide users with access to the session of the container used to create internal consumption.

  Tom

• Problem when writing hidden beforehand, sets

  OK, I'm having a problem when masking a layer of Twixtored.

  This is what happens:

  I have the original footage into a computer, I used twixtor to it slow down to 3% of the speed

  Seen here: http://prntscr.com/zbicc

  I then composed pre which slowed down in a model of its own and hidden around that parts I wanted and named this model "obliterated comp 1.

  Seen here: http://prntscr.com/zbitw

  and here: http://prntscr.com/zbiyc

  I précomposé then the hidden in another comp called 'replacement of the sky' layer and that's when I hit the problem, it does not appear, it gives me just a black screen.

  Seen here: http://prntscr.com/zbj9n

  and here: http://prntscr.com/zbjcn

  I tried to make ' Masked comp 1 ' and 'replacement of heaven' and with the two it just shows a black screen, but if I turn the Twixtored model that makes very well. So I think it has something to do with the mask, but I can't understand it.

  Help, please.

  Black screen, I see two VERY big problems in the workflow as described... or at least as how I understand your workflow.

  You used Twixtor for slow video to 3% of its normal speed: this is tons and tons of redeuction of speed, and you're lucky that Twixtor has been able to give you a picture useful to ALL.  Then you precomped, too boot.

  Then, you were hoping against hope that you could effectively mask the precomp... which was probably the target frame rate.

  Give you a chance to find something: once you use Twxtor, prerender it.  And I have to tell you: If you actually use Twixtor to slow down the film to 3% of normal speed, it probably doesn't look good.  Twixtor is optimal for minor speed variations, but for 3% of normal?  He cannot work miracles...

• Why firefox is always problem when I put cache 0 MB Web site?

  Hello

  I develop Web sites and about 1 month, I think that to the top of the Version 30 or 31 have problems with the cache.

  I activated the manual cache size and set it to 0MB (Web sites), but I still have problems that a site is cached.

  In development, it's a big problem, when the browser still shows you an old page. I have change something in my code, but it does not apear when I reload the page. When I opened another browser chrome for example I see my changes.

  BTW, I don't like chrome and I was really happy when I stay in firefox. But the described problem could couse me to change browser.

  Best regards and continue to have fun in dev
  Michael Topor-Grabowski

  Hello Michael,
  There are actually quite a few ways to accomplish what you're trying to do. To refresh the page without querying the cache, the simplest method is to type ctrl and f5 instead of simply typing f5 or hit the button reload. The second would be to set up your development web server to transmit the "Cache-Control: non-cache ' directive cache so that any browser you test with, (as long as it is in accordance with w3c) does not cache the hosted Web pages. The last method should be considered as a last resort, but you could also disable the cache of Firefox by activating / disabling the network.http.use option - Hide all: config to false. Remember, once you decide on one of these methods to clear your browser cache before testing again.

• I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update.

  I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason

  http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.

• Problem when the PWM signal combinning and analog signal TOGETHER!

  Hello everyone,

  first I DAQmx 6212, and I need to run the water pump small (9V - 16V) that should be driven by a PWM signal; I also have a motor (5V - 13V) for a water supply which must be controlled by an analog signal and it has built in a force feedback potentiometer, I logged onto this potentiometer correction + 5V the DAQmx and used the output voltage of the third extremety as a value to diagnose to know the position of the engine.

  My VI shows:

  1 is a normal meter production to create my PWMout signal.

  2 is an analog input, I use it as a PWMin to the LabVIEW to diagnose what is happenning in my pump water through the cycle and frequency.

  3 is an entry of the third extremety of the analog potentiometer.

  4 is an analog output that I used as power supply of the motor valve and I used an AC/DC amplifier for aplify signal the DAQmx and the motor road, between the two (3. 4.) I made a comeback with a few calculations, I had a P-controller to know the real position of the engine valve.

  My problem:

  When setting to 1. and 2. in the same VI only, I get an own PWM output with no problem.

  also with 3. and 4. in the same VI only i can control the motor valve without any problem.

  but when I put all these 4 set found in the attached VI, I have a problem as the engine valve turn continuously without stopping even if I change the position of the valve between 0 and 100%, I should mention that I see a PWM normal outside a signal on my oscilloscope, another thing to delete one of (1 or 2)  and run the engine valve VI works fine without any problems.

  so this my problem, if you can think of any solution please let me know.

  Thanks in advance for your help.

  Kind regards

  Caliente

  Here's your VI, slightly modified so the two analog inputs belong to the same task.  This if only for purposes of illustration, I him have not tested.  You will still need to do some debugging.

  While changing your VI, I noticed another potential problem with your original configuration.  You have configured the two tasks of AI for the same frequency, but read you 10000 samples of one of them and only 100 samples from the other (and throw it most of it).  Data acquisition data are buffered, and if you read as fast as you acquire, the buffer fills eventually.  If you read 10,000 samples of a channel, and the other channel acquires at the same rate, then when you read from the second channel you will get old stale data or an error full buffer.

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.

• I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent. What can I do?

  I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent.  What can I do?

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• Problem when the copy of the newspaper

  I just bought a new Pro Laserjet MFP M276nw. When I copy the daily crossword from the newspaper, empty cells prints gray rather than white as was the case with my previous ink jet which was a HP 309 has. I don't see all the parameters that will change that outside the change of 'lightness' or 'dark' settings. Is there a solution?

  Hi RossL49,

  I see that you are having problems when copying. Daily crossword cells are printing in gray instead of white.
  I'll be happy to help you.

  A cheque to document all the copy settings to see if this will solve the problem.

  Fix the copy quality issues.

  You can define a new default copy settings once the problem is resolved.
  You can save any combination to copy the settings as default settings to use for each job.

  In the home screen, press the copy button.
  Press the settings button.
  Configure the copy settings to your
  preferences, then highlight and touch the
  Set as default button is new.
  Press the Yes button.

  To test the paper (newspaper - which is not bleached paper) print a worksheet with empty cells and make a copy to see if they are white.

  Please let me know if you need additional assistance.

  Thanks for posting on the HP Forums.
  Have a great day.

• I can't register names and create playlist appear windows media player acountered a problem when creating or saving the playlist

  appear windows media player acountered a problem when creating or saving the playlist

  To the WMP library, please click on organize and select manage libraries - music . What places are? If there is no available location, remove them and also make sure that a default save location is set. Do the same for the other libraries (videos, pictures, and Recorded TV).

  If this does not help, close WMP, open Windows Explorer, right-click the music library, select Properties and click on restore by default . After that, make sure that a backup location is defined (as indicated by a check mark).

  Tim Baets
  http://www.BM-productions.TK

• Problem when using bb-ant-tools to create a multi-module application

  I am trying to redesign an application prototype into something more adapted to our needs. The prototype was built with the first version of the Eclipse plugin, but I've converted successfully to the current version.

  I have same configuration Ant with bb-ant-tools for it and have successfully build the application and the executable running on the real device.

  But this prototype had code to put them all in a single module, even the source to a third party library with support for managing messages JSON ('J2ME JSON").

  We need to build several slightly different applications from the same code base (differing mainly in aspects of the customer specific look and wording etc.).

  So I want to divide the code into several distinct modules, each providing it is build own artifacts and have a top-level project for each variant you want to produce.

  So at the beginning I want to have these three modules:

  • J2ME-json - the third party lib
  • Code base - the largest part of the source code and default localization resources
  • my-app - the main class, icon resources (and in the future some property files and resources specific to the customer location)

  I have Ant generate files for each module, which compiles and signs packages resulting - seems ok so far, no problem when executing the task of sigtool. The build for 'j2me-json' file and 'code base' defines the product as a type = "library".

  The build for "my-app" file collects the artifacts to build (* .jar, * .cod, etc.) and copy them to a local directory "dependencies", where they will be extracted for the compilation of the actual application. After compiling and signing all are copied to a deployment directory.

  Deploy the application on the device via the 'Desktop Manager' but when I run it on the device I get the error message:

  Error at startup MyAppId: Module ' code$ 2dbase ' attempts to access a secure API.

  The strange thing is, that the "Tool of Signature" window shows demand of signature of all modules during the phase of signature of the request, not only for the request form itself as the error message suggests. And I even sign the modules separately because of this message - but it does not help...

  So, what's wrong here?

  Here is the definition of the actual target of the relevant elements:

  The *.alx file that looks like this:

           My App Name      1.2.1.35               MyAppId.codj2me-json.codcode-base.cod         
  

  I'd appreciate any help with this problem! Thanks in advance...

  Horst Weber.

  Found!

  My mistake was that I thought that I can mix attribute and property file inclusion statements in the task of jdp bb-ant-tools. My actual task for libraries looked like this:

  Obviously, the author didn't want to handle the ambiguity when someone sets the same property as an attribute, and in the file. So you should use either one or the other: If you use properties files, then declare all your properties here.

  So this message "Module attempts to access an API secured." seems to be very misleading: it disappered after correction of the generation of files and I now have a common application.