How can I remove a (problem when setting up a Repeater) network extension

Similar Questions

• How can I remove USER ACTIVE when I go into my PC, please? __

  How can I remove USER ACTIVE on the screen when I'm on

  computer, please?

  sikki14

  Sounds like you might want to take a look at: How to disable the functionality of quick-change to user in Windows Vista

• How can I remove the gaps when pasting and select with the magic wand?

  Anti-aliasing is turned off however, there are gaps. How can I stop this? This problem occurred recently, as a few days ago, I've been able to copy and paste without gaps.

  I select a part of the image then copy and paste into a new layer in the same position, then I select the inverse of the image newly pasted the selection back to previous and Coptic image, the other party, and paste it into a new layer.

  The gap is between the tank and the plants (see image)

  

  Sometimes, these lines appear if you are not 100% like c.pfaffenbichler said, it can also be the way that your graphics card is reading the info, as often, when you flatten layers, the line will disappear. One thing you can do is to develop the selection of 1 px on the layer which will be the bottom. This will give you a bit of overlap.

• How can I remove a birthday when the calendar says "contact the administrator"... but that's me?

  What should I do to remove this anniversary?

  I get this message when I try to delete a birthday of my calendar.  This is my own computer, so that makes me the administrator.

  For Apple, I suggest they add also instructions for the administrator like him say where going to allow that to happen.

  

  The "Birthdays" calendar is automatically generated information in your Contacts. You can't delete this calendar events. You need to update your Contacts information.

• How can I fix the problem when another computer is using the same IP address with me?

  My computer has proven to me that there is another computer using my IP address.

  He said I need to contact the administrator.
  I don't know how to do in this regard. Help, please.

  Since it's your own home network, it means you are the network administrator. Which basically means that you should have total control on who can and can not connect to internet through this network.

  Then, you should have a router somewhere in your House. This is the device that sends the wireless signal. Most likely, it will be connected to a phone jack or cable from the wall, or a modem, depending on which company you get your internet service.

  You need to find this device, the router and restart for it. Do the same on your computer. Once both have restarted, try to connect to the internet. The router must have an ID written somewhere on it. This same ID should appear in your network and sharing Center , if you click on "Connect To A Network.

  The homegroup is something a little different. A homegroup is really just a collection of your own computers, or in your home. For example, if you had a desktop and a laptop, and I wanted to share the files from one to the other, you should join them in the same homegroup. It has nothing to do with putting on the Internet, just the connection of two computers together. It of good that you set up a homegroup with a password, but won't really help you here.

• How can I remove old agreements when the "delete" button does not work?

  In our account here several agreements that are years old, created by users is no longer working with us. But in the accounts of administrators who have access to these agreements now, the 'deleted' button is gray and does not? How get rid of these old contracts?

  Hello

  May be that the sender of a document cancel/remove the agreement.

  Thank you

• How can I remove the audio when there is no cutting to click on?

  I did several films, however, the latter has a problem. He didn't there is audio that plays at the end of my movie, but no visible cutting (video or audio) for me, right click and delete.  It's as if the element is missing, but audio plays for five or six seconds, not related to any video.  I can't highlight the audio delete (there is no image showing same) and I cannot reduce the volume level here either.  I think that there is a bug in the last update of the components of Prime Minister.  Any ideas?  Or I have to start all over in the creation of my film?

  todde

  Thanks for the reply with screenshot.

  On your screen, you are in the quick workspace. Please go to the Expert workspace where you can get a better view of what's going on

  and therefore have more control.

  It expanded to display the titles and their content will be a definite advantage.

  We will follow to your results.

  RTA

• How can I remove entries from the catalog of PSE 8 Organizer when his picture does not appear in the browser?

  I imported a group of files in the folder, and organizer gave me the pop-up "new files in track files" and imported correctly.  Then I used Windows to copy these files in the folder B, also a control folder.  Once again, organizer gave me the pop-up "new files in follow the folder" correctly, BUT showed no files imported into the browser, despite everything show, etc.  I used Windows to delete all files in the folder B, then has tried to re - import.  Organizer doesn't say ' no file imported, because they already exist in this folder.  Apparently, the files are saved in the catalog, even if they are not physically there.  How can I remove these catalog when there are no photos in the browser, I can click and say ' Delete catalog?

  Oh, ugh!

  The answer to your question of title, is that you cannot correct this situation by using the Organizer.  Without a doubt, something in your database (catalogue) is screwed up.  The database is a SQLite database, so if you know someone who is a type of database that is experienced, it can use a database query tool to clean the entries in the media_table table.  This can be more or less a complicated matter, depending on how much other data you must save - you will certainly need to work closely with him on this issue.

  The best thing to do, of course, is to create a new catalog and start from scratch.  Lose all your work with labels and albums will result, but...

  At least now you know how to get copies of your photos in the Organizer in the right way.

  Ken

• How can I remove the old plugins?

  Just recently decided to go back using Firefox. Are using Chrome. Firefox has one thing that is not Chrome. So when I see a number of old plugs Ins back. How can I remove them. I set myself to never activate. After that each plug-in poster SEARCH. But I don't want to search... I want to delete the 'old'. So where should I go from here?

  This is my friend. I only moved the old *.dll and *.ocx files in a different directory, deleted the old executables and restarted FF. And voila, it worked perfectly without having to re - install anything. Thanks for the help.

• When I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  Using Windows XP Profwssional.

  (1) when I try to set up "Remote support" I get the error message: "your current system settings prevent you from sending an invitation. How can I solve this problem?

  (2) can I use this feature when both computers are on the same network?

  Hello

  (1) you must configure your computer to use the remote control - see here:

  http://www.winxptutor.com/raenable.htm

  and don't forget to make the firewall exceptions

  (2) this function works on the different network also (so a computer can be in the United States and one in Australia)

  Note - a computer can have Windows XP (family or professional edition) and another may have Windows 7, Vista.

  LC

• How can I remove pop ups look bad when I turn on my computer

  How can I remove pop ups look bad when I turn on my computer

  Hi Semone31,

  ·         What is the full pop-up message?

  ·         You did changes to the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned at step 7 of the article mentioned above.

  Method 2: I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Let us know if that helps.

• whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  whenever I select any folder or any icon in my computer win 7 I get a popup to remove this icon why this error comes how can I solve this problem pls help me

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. What is the exact error message do you get?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: Start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   

  Method 2 :  If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Follow these steps to reset the computer to start as usual:

  (a) click on start toreduce this top that i, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  (b) under the general tab, click the Normal startup option, and then click OK.

  (c) when you are prompted to restart the computer, click restart.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• When firefox load it also load another tab for the search engine. How can I remove this where it will load only my start page?

  When firefox load it also load another tab for the search engine. How can I remove this where it will load only my start page?

  You can check the setting of the home page and make sure that it doesn't have a leak ' |'.

  Firefox supports several home pages separated by ' |' symbol.

  • Tools > Options > general > startup: Homepage
  • https://support.Mozilla.org/KB/how+to+set+the+home+page

• I removed the toolbars so I could see below thinking that I could easily get them back, but I can't. How can I get back them? I can't even put a new web address now. Or refresh a page. Or go to the front/back. How can I solve this problem?

  I removed the toolbars so I could see below thinking that I could easily get them back, but I can't. How can I get back them? I can't even put a new web address now. Or refresh a page. Or go to the front/back. How can I solve this problem?

  It depends on how you

  1. Choose the Mode "full screen" or
  2. unchecked toolbars

  The F11 key activates / turns off Mode full screen or not. Full screen, you have no toolbars, no tab and no bar Add on (bottom).

  • See-> http://kb.mozillazine.org/Netbooks#Full_screen

  If unchecked you your toolbars (checked = displayed; UN - check = not displayed), and then do one of the following, then click on those you want to check/uncheck:

  • Right-click in the empty space at the end of the tab bar
  • Press the ALT key or the F10, the poster Menu bar, click View > toolbars
  • Firefox > Preferences > advanced > General tabFirefox > Preferences > advanced > general tab
  • Hold down the ALT key and type the letters of the keyboard V T
  • the URL/address bar, buttons previous/next, refresh/reload buttons are located on the Navigation toolbar
  • See-> https://support.mozilla.com/en-US/kb/Back%20and%20forward%20or%20other%20toolbar%20items%20are%20missing
  • Also see-> https://support.mozilla.com/en-US/kb/how-do-i-customize-toolbars
  • Also see-> http://kb.mozillazine.org/Toolbar_customization

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• There are ten virus adware and malicious software attempting to invade my files; If you follow prompt to "remove all", nothing happens. How can I solve this problem?

  There are ten virus adware and malware that have file names tries to invade the following files: my dovument (7), Shared (6) and Local C drive files (78); If you follow prompt to "remove all", nothing happens.  There are three flashing warning signs alert me of evil potentiial for files named above. How can I solve this problem?

  Hello

  We need more information. What antivirus do you use? Don't forget to contact support
  and forums. If the MSE a response - MSE here on answers forum. What version of Windows
  you use. It might also help if you named the malware involved.

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ===============================================================

  This troubleshooting is for Windows 7 - Vista is similar - for XP using RUN instead of
  Start - Search.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  There may be necessary sanitation - which some depends on your version of Windows.
  RUJ SFC/scannow and checkdisk (CHKDSK) - if necessary to do a repair installation. For
  more information on these methods require responses - Windows Forums for your version of
  Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  Also, be sure to provide all the information we need to help us to help you:

  How to ask a question
  http://support.Microsoft.com/kb/555375

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">