Similar Questions

• Server restarts after a bugcheck. The bugcheck was 0 x 00000050 (Windows 2003)

  Having problem with reboots on a virtual server with Windows Server 2003 SP2.
  Sometimes sometimes during the night and sometimes during the day, a week between sometimes and a couple of months. Cannot see logically for restarts, please help. See analysis of bug-check below:

  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {bcf38c28, 0, bf8b7fc4, 0}

  Probably caused by: win32k.sys (win32k! DestroyThreadsObjects + 4f)

  Follow-up: MachineOwner
  ---------

  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: bcf38c28, memory referenced.
  Arg2: 00000000, value 0 = read operation, 1 = write operation.
  Arg3: bf8b7fc4, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 00000000, (reserved)

  Debugging information:
  ------------------

  READ_ADDRESS: bcf38c28

  FAULTING_IP:
  Win32k! DestroyThreadsObjects + 4f
  bf8b7fc4 8b 01 mov eax, dword ptr [ecx]

  MM_INTERNAL_CODE: 0

  Nom_image: win32k.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4f2a984f

  MODULE_NAME: win32k

  FAULTING_MODULE: win32k bf800000

  DEFAULT_BUCKET_ID: DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: mcwql2.exe

  CURRENT_IRQL: 1

  TRAP_FRAME: b7b53b78-(.trap 0xffffffffb7b53b78)
  ErrCode = 00000000
  EAX = bcf38bf8 ebx = 00000022 ecx = bcf38c28 edx = 80000002 esi = f1eccc98 edi = 00000198
  EIP = bf8b7fc4 esp = b7b53bec ebp = b7b53c3c iopl = 0 nv up ei pl zr pe nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010246
  Win32k! DestroyThreadsObjects + 0x4f:
  bf8b7fc4 8b 01 mov eax, dword ptr [ecx] ds:0023:bcf38c28 = bcf37ee8
  Reset the default scope

  LAST_CONTROL_TRANSFER: from 8085ed47 to 80827c 83

  STACK_TEXT:
  b7b53ae8 8085ed47 bcf38c28 00000050 00000000 nt! KeBugCheckEx + 0x1b
  b7b53b60 bcf38c28 8088c 820 00000000 00000000 nt! MmAccessFault + 0xb25
  b7b53b60 bf8b7fc4 bcf38c28 00000000 00000000 nt! KiTrap0E + 0xdc
  b7b53bf4 bf8b835c 8a4bfdb0 00000000 00000000 win32k! DestroyThreadsObjects + 0x4f
  b7b53c3c bf8b6bb6 b7b53c64 00000001 bf8b7a13 win32k! xxxDestroyThreadInfo + 0x23e
  b7b53c48 bf8b7a13 8a4bfdb0 00000000 00000001 win32k! UserThreadCallout + 0x4b
  b7b53c64 8094c3d2 8a4bfdb0 88829450 00000001 win32k! W32pThreadCallout + 0x3a
  b7b53cf0 8094c68f 00000000 b7b53d4c 8082e0d6 nt! PspExitThread + 0x3b2
  b7b53cfc 8082e0d6 b7b53d48 88829450 b7b53d3c nt! PsExitSpecialApc + 0x1d
  b7b53d4c 00000000 00000001 80889897 b7b53d64 nt! KiDeliverApc + 0x1ae
  b7b53d4c 7c82845c 00000000 00000001 b7b53d64 nt! KiServiceExit + 0 x 56
  WARNING: Frame IP not in any known module. Sequence of images may be wrong.
  00000000 00000000 00000000 00000000 0x7c82845c 009efe5c

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  Win32k! DestroyThreadsObjects + 4f
  bf8b7fc4 8b 01 mov eax, dword ptr [ecx]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: win32k! DestroyThreadsObjects + 4f

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: 0x50_win32k! DestroyThreadsObjects + 4f

  BUCKET_ID: 0x50_win32k! DestroyThreadsObjects + 4f

  Follow-up: MachineOwner
  ---------

  / P

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• new scene after the success of connecting AS3

  Hi guys,.

  I am really new to actionscript, so I have trouble understanding the code. I tried a lot of ways to go to a new scene after the successful login, but unfortunately not. I followed one of the tutorials on the part of connection... It works and I'm happy wif it... but right now, it only displays the success message. Instead, I want to go to a new scene, but don't know how. I'll post the code below. Hope you can help ... I have a date for this project. Thank you!

  [actionscript]

  the package of actions {}

  import flash.display.MovieClip;

  import flash.events. *;

  flash.net import. *;

  import flash.text. *;

  main/public class extends MovieClip {}

  public int main (): void {}

  submit_button.buttonMode = true;

  submit_button.addEventListener (MouseEvent.MOUSE_DOWN, checkLogin);

  username. Text = "";

  Password.Text = "";

  }

  public void checkLogin (e:MouseEvent): void {}

  If (username.text == "" |) Password.Text == "") {}

  If (username.text == "") {}

  username. Text = "enter your username";

  }

  If (password.text == "") {}

  Password.Text = "enter your password";

  }

  } else {}

  processLogin();

  }

  }

  public function processLogin (): void {}

  var phpVars:URLVariables = new URLVariables();

  var phpFileRequest:URLRequest = new URLRequest ("login.php");

  phpFileRequest.method = URLRequestMethod.POST;

  phpFileRequest.data = phpVars;

  var phpLoader:URLLoader = new URLLoader();

  phpLoader.dataFormat = pouvez;

  phpLoader.addEventListener (Event.COMPLETE, showResult);

  phpVars.systemCall = "checkLogin;

  phpVars.username = username.text;

  phpVars.password = password.text;

  phpLoader.load (phpFileRequest);

  }

  public function showResult (event: Event): void {}

  result_text. AutoSize = TextFieldAutoSize.LEFT;

  result_text. Text = "" + event.target.data.systemResult;

  }

  }

  }

  [php]

  <? PHP

  include_once "dbconnect.php";

  $username = $_POST ['username']; flash variables

  $password = $_POST ["password"];

  If ($_POST ['systemCall'] == 'checkLogin') {}

  $sql = "SELECT * OF USERS WHERE username = '$username' AND password = '$password" ";

  $query = mysql_query ($sql);

  $login_counter = mysql_num_rows ($query);

  If ($login_counter > 0) {}

  Print "systemResult = welcome $username!"

  } else {}

  Print "systemResult = invalid user!"

  }

  }

  ? >

  You probably want to check the value that it returns and use it to decide whether to go to the scene following or not.

  public function showResult (event: Event): void {}

  result_text. AutoSize = TextFieldAutoSize.LEFT;

  result_text. Text = "" + event.target.data.systemResult;

  If (String (result_text. (Text). IndexOf ("Welcome") == 0) {}

  gotoAndPlay (1, "Scenename");

  }

  }

  What is the first line is check if the welcome Word is at the beginning of all that is in the textfield (starting at index 0).  If so, then she issues a command to switch to a different frame/scene

• my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  my calendar is stuck on "mobile timetables for the server account" after mountain lion update

  HOPE TO HEAR SOME ADVICE PLEASE :)

  1) go in your user library folder (~ / library). Hold down the option/alt key while accessing the menu Finder go.

  2) go to the calendar folder

  (3) delete all files that say "cache" (replace the your desktop in the case where you want to move them at least)

  (4) always in the user library folder, go to the Preferences folder

  (5) delete the com.apple.calendar.plist (on the desktop again)

  (6) restart your computer

• I can't install Firefox for Android on HTC Desire (Froyo) via Android Market, as the download keeps restarting after reaching 60-75% (about 7-8 MB of 13.84 MB). Any help?

  Download on restarts after a while. The notification bar poster download % as if the previous download is still in progress. It is, first time started download, notification bar shows % correct. Around 70%, the download within the app market starts again from 0 KB, and the notification bar indicates the average of the two downloads (35% when the download market is 0%, 40% after download in 10%).
  This second new download disappears from the market and a third begins, no any other warning or error message. This time the notification bar indicates average of 3 downloads!
  No idea what's going on, this is my first download firefox for mobile.

  Sorry, I don't know why the app from the market is unable to complete the download.

  If it still does not work, you can try the link to FTP server on this page and see if it works better:
  https://wiki.Mozilla.org/mobile/platforms/Android

  You can also try to download Firefox on your computer using this FTP link and then look for the instructions on how to "sideload" application on your phone via the USB port.

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• HP elitebook 2540p does not start after the successful bios update

  Hello people,

  I need your help.

  my hp elitebook 2540p with 2.5 "hhd does not start after a successful bios f.03 to f.24 upgrade done through windows 7.

  When I turn it on the blue light of wifi and power is on but nothing happen.

  I tried to remove the chip from the bios, cmos, hdd, ram, wifi battery... all, but nothing doesn't happen.

  I also tried to start it with the victory + b procedure and win + procedure four arrows so without USB key the caps lock flashing indefinitely but nothing happens, only the fan works quickly with a blue light

  with the USB the system restarts itself every two seconds and I have to remove the USB key.

  I do not know how...

  Thanks for any help.

  Luigi

  all very well now. I used the f.20 rom based on the internet and everything works again.

• Error: wininit lsass.exe windows server restart, event ID: 1000, 1001, 1015, 6005, 6006

  Hi everyone, I recently joined in a Banking Corporation as a leader of IT below support that I explained about an error that is impossible to fix.

  This company is running windows server 2008 r2 standard 64 bit OS sp1.

  HP proliant DL380 G7 intel xeon
  system processor: intel xeon E5620

  This company is facing this problem since April 2014 to cultivate the date, but the question not yet fixed because there is no COMPUTER administrator in this endeavour to maintain this server. So, in this company, I'm the only guy with COMPUTER knowledge and my management was waiting for me to fix this error and to run the server without any problem.

  The last few months I've corrected several server issues related in this society as windows update, windows daily backup, SQL server backup, user permissions, disk space low and network troubleshooting and equipment computer issues etc...,

  But come to this lsass.exe I am unable to solve this problem I tried many ways to research online, but not yet fixed. Below you will find the details.

  *) fix for windows server 2008 R2 Standard sp1

  After the failed to install installation
  Fix for Windows (KB2545850)

  *) Tried to use the system tool
  But failed to solve problem

  *) I tried this command at the command prompt
  sfc/scannow
  result
  Full check of 100%.
  Windows resource protection did not find any breach of integrity.

  *) I also tried to change the registry of one of the web links of dell values, but there is no change at all.
  http://www.Dell.com/support/article/us/en/19/SLN291309/en

  *) I thought installing the fix and some other updates in safe mode only to try my luck, but when I tired to start the server in safe mode it takes a long time to start in it. But, I'll try again if this issue is going to fix through safe mode then please advise me on this.

  So to come back to this question, at the time of the restart, a small window will pop up as below.
  Windows has encountered a critical problem and will restart automatically in a minute. Please save your work now.

  *) I tried this in shutdown command prompt cmd - to stop this judgment but does not any.

  *) I've tried many ways to solve this problem, but none of them worked for me even I tried to upgrade from sp1 to sp2 but could not do so for the following reason:
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=17669

  After downloading the software from the link above and when I tried to install error appear below.
  This service pack does not apply to the version of windows running on this computer.

  It is the only question that is impossible to fix. So, I need expert help to resolve this issue as soon as POSSIBLE.

  Note: I can not reinstall the operating system on this server because it runs many applications on the SQL 2008 database and also it is already configured with many services and I don't really know how many applications do I need to take a backup and how to configure manually. so if I reinstall OS and if I'm bored configurations or settings and then it will be difficult for employees who work on these applications. So I don't want to take the risk of doing as I said I am new to this company.

  Additional information: this sever when ever it will pop up as server will restart in one minute then it restarts to 3 times without any gap, then after an interval extended from 3 to 4 hours, then it will follow even as I said above. To understand better, I'll give you this good example: If the server restart to 09:00, then 2nd reboot will be at 09:02 and the 3rd reboot will be at 09:04 and then after 3 to 4 hours apart, as about 13:00 it restarts again for 3 times vice versa.

  Even I understand that I have to reinstall the OS to fix this stupid problem which is like a nightmare for me, but right now, I can't. So, please help me to solve this problem without reinstallation of server operating system.

  I expect the best answer to my question that will solve my problem without any problem to this server.

  Below the five examples are the main reason for my server restart. If you need anything that either more information please advice me I will answer according to your instructions.
  Event ID 1000
  Event ID 1001
  Event ID 1015
  Event ID 6005
  Event ID 6006

  Below, I have collected more information of the observer of events and even from now this server restarts again due to this error, I don't know what to do...!

  1st error:

  -System
  -Supplier
  [Name]  Application error
  -Event ID 1000
  [Qualification] 0
  Level 2
  Working 100
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479745
  Application of channel
  Security
  -EventData
  Lsass.exe
  6.1.7601.18443
  5348920c
  ntdll.dll
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  220
  01d16482b15bac9c
  C:\Windows\system32\lsass.exe
  C:\Windows\SYSTEM32\ntdll.dll
  5518c7e0-d091-11e5-88FE-68b5996a1808

  1 details of the error:

  The failing application name: lsass.exe, version: 6.1.7601.18443, time stamp: 0x5348920c
  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
  Exception code: 0xc0000374
  Offset: 0x00000000000c4102
  ID of the process failed: 0 x 220
  Start time of application vulnerabilities: 0x01d16482b15bac9c
  The failing application path: C:\Windows\system32\lsass.exe
  The failed module path: C:\Windows\SYSTEM32\ntdll.dll
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  2nd error:

  -System
  -Supplier
  [Name]  Windows error reporting
  -EventID 1001
  [Qualification] 0
  Level 4
  Task 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479746
  Application of channel
  Security
  -EventData
  0
  APPCRASH
  Not available
  0
  Lsass.exe
  6.1.7601.18443
  5348920c
  StackHash_802c
  6.1.7601.18247
  521eaf24
  C0000374
  00000000000c 4102
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  0
  5518c7e0-d091-11e5-88FE-68b5996a1808
  4

  2 details of the error:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0
  Signature of the problem:
  P1: lsass.exe
  P2: 6.1.7601.18443
  P3: 5348920c
  P4: StackHash_802c
  P5: 6.1.7601.18247
  P6: 521eaf24
  P7: c0000374
  P8: 00000000000c 4102
  P9:
  P10:
  Attached files:
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_lsass.exe_6ddcb716254c9cb8578365fbfa251cf472753034_0d1bddf3
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: 5518c7e0-d091-11e5-88fe-68b5996a1808

  3rd error:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Wininit
  [Guid]  {206f6dea-d3c5-4d10-bc72-989f03c8b84b}
  [EventSourceName]  Wininit
  -EventID 1015
  [Qualification] 49152
  Version 0
  Level 2
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 30:33.000000000Z
  EventRecordID 479747
  Correlation
  -Execution
  [Pr

  ocessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  C:\Windows\system32\lsass.exe
  255

  3 details of the error:

  A process of critical system, C:\Windows\system32\lsass.exe, failed with status 255 code.  You must now restart the machine.

  error 4:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6005
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 35:43.000000000Z
  EventRecordID 479787
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  CreateSession
  00000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000000
  In bytes
  0000: 00 00 00 00...

  4 details of the error:
  Winlogon notification subscriber takes a long time to handle the notification event (CreateSession).

  error 5:

  -System
  -Supplier
  [Name]  Microsoft-Windows-Winlogon
  [Guid]  {DBE9B383-7CF3-4331-91CC-A3CB16A3B538}
  [EventSourceName]  Wlclntfy
  -EventID 6006
  [Qualification] 32768
  Version 0
  Level 3
  Task 0
  Opcode 0
  Keywords 0 x 80000000000000
  -TimeCreated
  [SystemTime] 2016-02 - 11 T 07: 36:39.000000000Z
  EventRecordID 479792
  Correlation
  -Execution
  [ProcessID] 0
  [ThreadID] 0
  Application of channel
  Security
  -EventData
  GPClient
  116
  CreateSession
  04000000
  --------------------------------------------------------------------------------
  Binary data:
  In the words
  0000: 00000004
  In bytes
  0000: 04 00 00 00...

  Details of the error 5:
  Winlogon notification subscriber was 116 second (s) to handle the notification event (CreateSession).

  Thanks forward,

  SAI

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  Please do not hesitate to contact us if you have other questions related to Windows.

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000007f

  Get a BSOD on Windows Server 2008 R2 SP1 with "the computer restarted after an error checking.  "The bugcheck was: 0x0000007f (0 x 0x00000000000006f8, 0 x 0000000000000008, 0000000080050033, 0xfffff800018c3484).

  -a ran the system file without error checking

  -a ran diagnostics material without errors

  -all updated hardware drivers

  -windows update updates

  -a ran chkdsk on drives without errors

  I excluded the material with Dell.

  I have the minidumps available if it lights all but check these in the BSOD Viewer, it shows.

  Bug control chain: UNEXPECTED_KERNEL_MODE_TRAP

  Bug check code: 0x0000007f

  Parameter 1: 00000000'00000008

  Parameter 2: 00000000'80050033

  Parameter 3: 00000000' 000006f8

  Parameter 4: fffff800'018 c 8484

  Caused by the driver: ntoskrnl.exe

  Caused by Adresss: ntoskrnl.exe + 75bc0

  Might try to uninstall the AV as another post suggested - will show the result if all of the changes.

  Any ideas what this could be?

  Crash dump...

  The debugging session: 18:40:29.750 Thu Jul 3 2014 (UTC - 04:00)
  System Uptime: 0 days 20:07:06.256

  Loading the kernel symbols

  BUGCHECK_STR: 0x7f_8

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP

  Nom_processus: ledgers.exe

  CURRENT_IRQL: 1

  LAST_CONTROL_TRANSFER: from fffff800018d0169 to fffff800018d0bc0

  Msinfo32.txt

  07/03/2014 17:22 application Error Faulting application name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  The failed module name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  Exception code: 0xc0000005
  Offset: 0x0000ad75
  ID of the process failed: 0 x 8940
  Start time of application vulnerabilities: 0x01cf96bab4486883
  The failing application path: C:\Program Files (x 86) \Client\Ledgers.exe Prophet
  Path of the failing module: C:\Program Files (x 86) \Prophet Client\Ledgers.exe
  Report ID: a9efac34-02d6-11e4-a027-a4badb445132

  28/06/2014 18:53 application Error Faulting application name: Ledgers.exe, version: 1.0.0.0, time stamp: 0x2a425e19
  Name of the failed module: KERNELBASE.dll, version: 6.1.7601.18409, time stamp: 0x53159a86
  Exception code: 0xc0000005
  Offset: 0x00014ab0
  ID of the process failed: 0x21c0
  Start time of application vulnerabilities: 0x01cf92d1ba345f0a
  The failing application path: C:\Program Files (x 86) \Prophet Client\Ledgers.exe
  Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll
  Report ID: 866145fa-fef5-11e3-9b5a-a4badb445132

• Win2000pro computer restarted after an error checking, event ID 1001

  After ten years to keep my Compaq Deskpro EN with WIN2000pro wkstation online, I get it now ' the computer was restarted after a bugcheck. The bugcheck was: 0x0000007f [0x00000008 0 x 0000000 0000000 x 0, 0 x 0000000]. Microsoft Windows 2000 [v.15.2195]. A dump was saved in the: C:\WINNT\Minidump\Mini102511-01.dmp. "I find no conflict in Event Viewer the audit of"error ".  Is it really one can provide the related question? Is there a software related issue?  Sometimes I click on print files and it happaned.  I reinstalled my drivers for my Xerox WorkCentre XL2120 and now he just happaned once again.   Once I close a window.  The only error I have at the moment in the event viewer has to do with the TrueVector monitor for my timing of Zone Evetn ID 7009 alarms.  This evetn doesn't happan while checking error.

  I use my WIN2000PRO machine as well as my e-mail, a printer host client, as well as to contain the many programs in WIN2000 / WINNT and I did not intend to retire there if it's something I can fix.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Server Forums. Here is the link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Windows home server disconnects after 5 minutes

  Windows Home Server disconnects after 5 minutes and there is no way to get there otherwise than to restart the device. Any thoughts?

  Hello

  1 - is the home server that is unplug or is it the client?

  2. what happens when you do an ipconfig / renew? Which will renew the connection?

  I suggest you to try the steps below and check if they help to resolve the issue.

  Method 1: Try to perform the boot minimum troubleshooting to find the root cause of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Make sure that return you the computer to a normal startup mode once it's done.

  I hope this helps. Let us know the result.

• How to check remotely that a computer has been restarted after Labview LIFE 2011 has been installed on it?

  Hello

  I'm deploying an application Labview 2011 on 150 XP machines in various plants worldwide. Currently, all the machines still have an old 8.21 Labview runtime (+ old DAQmx). I sent a procedure to my colleagues in the plants so that they fit the new runtime environment (+ new DAQmx). For my part, I built a code to check my PC if a certain registry key is present on the PC 150 who told me that the new run installer or not.

  The key I found is:

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\Installer\Products\1C5E801AE54C4AE43A59FC169F95CA28]
  "ProductName"="NOR-DAQmx Configuration 9.3.5 Support MAX"
  "PackageCode"="61EEAEC207A28A842B3341ED6809453D."
  'Language' = dword:00000009
  "Version" = dword:0923 c 001
  "Transfer" = DWORD: 00000001
  "AdvertiseFlags" = dword:00000184
  "InstanceType" = DWORD: 00000000
  "AuthorizedLUAApp" = DWORD: 00000000
  "Clients" = hex (7): 3A, 00, 00, 00, 00, 00

  It works well but it does not say that the PC has restarted after the Setup has been run. If I do not have to restart the PC and try to run my Labview 2011 executable I get a long error message (NIDAQmx not registered,...).

  As it seems difficult to get the properties of a key to know when it was installed I was leaning rather to check whether or not a certain DLL (?) was recorded. But it's just a vague idea, and I don't know how to set it up.

  I enclose the code that I have and that works well, but cannot differentiate between Labview 2011 installed runtime and PC restarted or not.

  Thanks for the help

  Christophe

  You could look for a file that would be created as part of the installation to determine date/time Setup (ini or another file created as part of the runtime support installed)

  Combine that with a request of availability of the station and you can calculate if the station was longer than the time since the installation. Not perfect, but should be possible...

  http://en.Wikipedia.org/wiki/uptime#Using_WMI

  wmic /node:"my-server" os get lastbootuptime
  

• Explorer Windows restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer unhandled 0x00000000 in explorer.exe exception States: after repair of Windows XP running.

  Windows Explorer restarts after a minute arriving at log on screen or if I connect quickly the dialogue windows Explorer States of exception unhandled 0x00000000 in explorer.exe: 0CX0000005: reading location access violation) X 00000000 Code: 0XC0000005, flags: 0 x 00000000 after you run Windows XP repair. Repeated repair Windows now for the third time, repair works OK but always produces the result above!. Initially, ran SFC/scannow, he ran very well modified some files but has not fixed the problem. Now I can't run Sfc/scannow in administrator mode in a repair console or environment (cmd) receive error "Windows file protection could not initialize the scanning of protected files. The specific error code is 0X000006ba [the RPC server is unavailable]. Can not access services through msconfig in safe mode, no available tab. When I click on Control Panel in safe mode, I get an error but control then window opens I can access to the services window, but as soon as I click on any service Windows Explorer plunges a black screen with only the white inscription SafeMode visible in each of the corners. When I try to access the sound module in safe mode, I have an error message and he abandoned me in safe mode desktop. Have no tab restore field in system restore to create a system restore point. In safe mode do not log off, restart or shut down (only windows explore drops leaving the black screen with text in each corner indicating the computer in safe mode, no recorded parameters.) Tried to run scanreg.exe & scanregw.exe run, cmd, mode console repair but command is unrecognized. When I tried to run all these commands using BartePe, the States of error cannot access raw disk. In safe mode, I can access the first level for example my computer folder, but when I double click on the c drive or any other drive nothing happens!

  Access msconfig, run, cmd, Device Manager, uninstall programs etc. in safe mode.

  I can easily re - install a new OS on the C partition, but I like challenges! Is there anyone with the skill out there who can offer suggestions for this mother of all XP flaws? (apart from the installation of a new version of Win XP)

  Hi Semi_Tech,

  Step 1: Start the computer and use the Recovery Console to check for errors
  a. see to start the computer and use the Recovery Console
  b. at the command prompt, type chkdsk /f /r and press to enter.

  Step 2: We recommend that you check if the RPC Server service is running.
  a. Click Start, click Run, type services.msc and click ok.
  b. in the list of services, double-click RPC Server service.
  c. change the startup type to automatic and click on the Start button.
  d. click ok to apply the changes.

  See if the steps mentioned by '- MainFrame -' can help you to:
  See windows SFC file protection could not run a scan of protected system files

  Step 3: Check if you can start the computer in safe mode
  a. see the description of the options course in Windows XP Startup Mode
  b. connection to the administrator user account and check if the problem persists.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HELP PLEASE! The computer was restarted after a bugcheck.

  I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.

  That's the message in the event viewer:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.

  This is the message that is displayed on windows re-opening after the accident:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFFFFFFFFFFD0
  BCP2: 0000000000000001
  BCP3: FFFFF800016DE0CC
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 272_3

  Files helping to describe the problem:
  C:\Windows\Minidump\030413-8765-01.dmp
  C:\Temp\WER-83783546-0.SysData.XML

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
  answers if this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
  Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  PAGE_FAULT_IN_NONPAGED_AREA parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The referenced memory address
  2	0: Read operation 1: Write operation
  3	Address that referenced memory (if known)
  4	Reserved

  If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.

  Cause

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Resolution

  
  Fix a defective hardware problem: if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  
  Fix a defective system service: disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.

  
  A problem of antivirus software: disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.

  
  Fix a corrupted NTFS volume: run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

  Remarks

  In general, this address is in the released memory or simply not valid.

  This cannot be protected by a try - except Manager - it can only be protected by a probe.

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000001e (0xfffff803b5ef8b28, 0xfffff8800129c100, 0xffffffffc0000046, 0xfffff8800129c1a0).

  Dear team,

  Our server Dell R 720 Windows server 2012 system restarts by giving the event ID: 1001.

  We use 14 Escan antivirus, and we don't have any ISO in Server system software, please suggest.

  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000001e (0xfffff803b5ef8b28, 0xfffff8800129c100, 0xffffffffc0000046, 0xfffff8800129c1a0). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 060915-47656-01.

  + System

  -Supplier

  [Name]  Microsoft-Windows-WER-SystemErrorReporting
  [Guid]  {ABCE23E7-DE45-4366-8631-84FA6C525952}
  [EventSourceName]  Error checking
   
  -EventID 1001

  [Qualification] 16384
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2015-06 - 09 T 04: 16:14.000000000Z
   
  EventRecordID 437504
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
     
   
  Security

  -EventData

  param1 0x0000001e (0xfffff803b5ef8b28, 0xfffff8800129c100, 0xffffffffc0000046, 0xfffff8800129c1a0)
  param2 C:\Windows\MEMORY. DMP
  param3 47656-060915-01

  Associated bdfsfltr.sys BitDefender AntiVirus FS Filter driver.  I remove it and use the built in Defender in its place