Olympus RS24 Footswitch

Similar Questions

• Downloaded an update for Olympus Viewer on my Mac Mini (2016).  Computer now does not restart.

  Computer: Mac Mini (2016); 10.11.3 OS

  I have a problem, restart the computer after the update Olympus Viewer.

  After I clicked on Restart, the Mac went through the usual screens, and I was able to enter my password.  After that, he on board to the next screen, but with the addition of terror "beachball" and does not go past this screen.

  Any ideas on what to do about it are very welcome.

  Thank you very much.

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  then remove the software as shown in the developer on their Web page for your product

  then restart normally.

• When you use Roland FC300 footswitch to control the transport, all the USB keyboard midi notes do not reach the logic. No help available on this?

  When you use Roland FC300 footswitch to control transport LOGIC, all midi keyboard USB (UMA25s) notes do not reach the logic.

  They are visible using MIDI Monitor s/w so reach the OS X - but do not make SENSE.

  I tried the function of the environment of the logic and the double check OS X Midi Setup but no difference statistically.

  I would appreciate any help on how to proceed.

  Thank you

  Paddy

  I do not understand your post. Your use the FC300 to control logic - how is it connected?   Is it plugged into the keyboard via middle or did you connect to logic directly via a midi interface?  (sense are the keyboard and the FC300 connected independently.

  When you say midi notes reached illogical (those transmitted by the FC300 or those via the USB keyboard do you mean?).

  First thing to do is to circumvent the control surfaces to exclude...

  Then, the control screen the custom value and see if data midi reached logical... If his hitting the midi monitor 99.9% sure it is hitting logic.

• Problem reading Olympus IX-81 VISA

  I'm trying to control the microscope Olympus IX-81 with LabVIEW and can't seem to connect with the microscope. I recently configured settings in panel test VISA and was finally able to both read and write in the instrument by series, but when I tried the same settings in VI provided by National Instruments, I get the same error of timeout in the CITATION read. Each command must end with \r\n, but I can't find where I can fix each order to contain it. I put a probe in the right seat, before the error occurs and noticed, on the settings tab of transfer in the probe Watch window, it didn't there has informed flag called "Use TermChar on read", but the termination character box below it contains 'A' instead of \r\n. In addition, the 'Send end on writing' indicator is on, however, the box "Mode end Send for the entries ' below it says"none ". I'm new to LabVIEW and this is my first time on the forums, so please forgive me if I did not explain my situation in the best conditions. I spoke with LabVIEW tech support several times without success. I have attached a screenshot of what I mean and also a zip file containing the VI, I'm working with. Any help would be greatly appreciated. If there is more information I provide, please let me know. Thank you.

  After eating some lunch and look at your picture better, I see that the removal of CR + LF is only from reading and not before the entry VISA.

  BUT also to research on the "Olympus" Command.VI again, the control of the "chain of command" is in "Normal view".

  So unless you have changed the version you have to "Show Codes"------"" we believe that you have not entered the CR & LN correctly.

  Change the display of the command string setting and re-enter your order with "\r\n".

• By clicking on the software Olympus IB just flashes up on top of the screen and then disappears.

  Original title: IB Olympus software

  My Olympus IB software does not open, I uninstalled and reinstalled but don't work when I click it it still flashes on the screen upward, and then disappears again... any ideas

  Hi Kris,

  1 Windows operating system you are using?

  2. were you able to use it before without any problem?

  3. did you of recent changes on the system?

  I suggest you to run the Fixit material and check if it helps.

  Hardware devices do not work or are not detected in Windows

  If you are using Windows 7, you can read the following article and check:

  Troubleshoot camera connection

  You can also consult the following Olympus support link and try to download the software and the Coachman:

  http://support.Olympus-Imaging.com/ibdownload/index/?lang=en

  Also check out the link:

  http://www.Olympus.co.jp/en/support/IMSG/Digicamera/QA/contents/IB/ib_a1.cfm

• How can I get my Olympus SP-550 UZ digital camera to work

  I need help to make my camera work on my PC.  I also Photostream in the iCoud with my iPhone can they work together? one or the other would be great. I just have connected it to my PC

  I need help to make my camera work on my PC.  I also Photostream in the iCoud with my iPhone can they work together? one or the other would be great. I just have connected it to my PC

  Check website Olympus for drivers/software for any OS you are running.

  All support for the camera is the manufacturer - regardless of the operating system that you use.

  http://www.olympusamerica.com/cpg_section/cpg_support_faqs.asp?ID=1289

• USB camera olympus fe-170 not recognized by windows 7

  Windows 7 will not recognize the Olympus FE-170 digital camera I have loaded down the soft ware and also updated software adobe reader as requested

  Hello

  1. What is the status of the device in Device Manager?
  2. do you get an error message?
  3A this works much earlier?

  Follow these methods and see if the problem still occurs.
  Method 1: Run the hardware and devices Troubleshooter
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Use Device Manager to search for the hardware changes

  Use Device Manager to find the hardware changes. After your computer search the hardware changes, it can recognize the USB device connected to the USB port so that you can use the device.

  To check the hardware changes, follow these steps:

  a. Click Start, type Manager of devices in the search box of start and press ENTER.
  In Device Manager, click on your computer so that it appears highlighted.
  b. click Action and then click Scan for hardware changes.
  c. check the USB device to see if it works.
  d. restart the computer.

  Method 3:
  
  You can also update your chipset drivers.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 4:
  I also suggest you try connecting to the computer or the port of differnet.

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck

• Can't intall Olympus digital camera model FE4020 USB not recognized

  Original title: Help with Olympus Digital Camera Model 4020 Setup
  I'm currently developing my model Olympus FE4020 digital camera... I use the USB port that is provided with the camera, however, Windows XP won't let me make the disc (E), no matter who is.  I get a message that the computer does not recognize this and cannot do the format.  I can't use the camera to do something without the implementation through the computer first. I hope you can help with this problem.

  Hello

  1 do you have similar problems with other USB devices connected to the computer?

  You can download the Auto-connect USB driver from the link provided below and check if that helps.

  Auto-Connect USB driver

  http://www.Olympus.co.jp/en/support/IMSG/Digicamera/download/software/index_other.cfm#driver

  You can try the steps of troubleshooting provided in the link below for solving problems with USB devices not recognized Windows XP.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

• Dragon Nat.Speak. 10 says that I need QUICKLY? to start Olympus 650 s

  I bought a package, Olympus 650 s and 10 Dragon Naturally speaking. my XP says I need Configuration LPR. ? How can I do this?   Are there fees

  Hello eyyvy,

  I found no information on Rapi requirements for Dragon Naturally Speaking. Can you please provide more details on the exact error message.

  If it's an error when installing Dragon Naturally Speaking, you can go to the support page of shade for their product below.
  http://www.nuance.com/support/Dragon-NaturallySpeaking/index.htm

  Also, what is your error when you try to start Olympus s 650?

  Thank you

  Marilyn

• Can not activate my digital camera Olympus

  I downloaded a driver for my camedia Olympus digital camera D-580 and after completion, I could not activate or use cos' the path of the file is "FIS". What is the resolution?

  This is not a Windows problem, contact Olympus for help support with their products.

  John

• Compatibility with the Olympus RAW files (.) ORF)

  IXpand can handle RAW Olympus files (.) ORF) and can they, or at least thumbnails, be read in iXSpand sync?

  It works as you say, and when an image is deleted from the iOS device, it is also deleted from the cloud if the settings are configured to synchronize.

  Thank you very much for your help, I will use the iXpand Flash Drive, it's well done, compact and the software is intuitive and simple.

• Windows Photo Gallery will not handle files Raw of Olympus. What can we do?

  Download the message of that impossible to open the Photo Gallery this file.  Is there a way to allow him to open Olympus Raw files?

  Although my Olympus XZ-1 has been registered on the 64-bit update, it did not help at all. If anything he seemed to back-track to a thumbnail of the image of an icon of the flower. Help

  =================================
  The only other possibility that I know is
  not free... but... There is a free 15-day trial.

  FastPictureViewer Codec Pack
  http://www.FastPictureViewer.com/codecs/
  (WIndows XP SP3 / Vista / 7 / 8)

  Waaaay scroll down for a list of supported devices.

• I want to record a conversation recorded my 702 recorder olympus to my pc

  I connect the recorder to the pc and I can view and play the recorded debate, however, I want to save the discussion recorded on my pc. When I disconnect the recorder, data are not on my pc. Ther must be a switch that allows me to save the discussion on my pc.

  Help

  Pat

  Hello

  What is the exact model?

  You can check the link and see if it helps.

  VN-702PC

  http://www.olympusamerica.com/cpg_section/cpg_support_faqs.asp?ID=1605

  You can also contact Olympus to improve assistance in this regard.

  http://www.olympusamerica.com/cpg_section/cpg_consumercontact.asp

• OLYMPUS Master 2 Runtime error

  All of a sudden I have a Runtime Error on Olympus Master 2 - performance that Vista Home Premium with Service Pack 2 it is not possible to uninstall or reinstall.

  Runtime error!

  Program: C:\Program Olympus Olympus Master2\MMonitor.exe

  This application has requested the execution to terminate in an unusual way.

  Any help greatly appreciated

  Try to update the software Olympus Master 2.04 to see if you have the latest.
  http://www.olympusamerica.com/cpg_section/OM_UpdateSoftware.asp

  If you can't uninstall programs and features, you can find a 3rd party software uninstall program to download.
  Otherwise, I suggest you contact Olympus of support for their product.
  http://www.olympusamerica.com/cpg_section/cpg_support.asp

  Thank you