USB camera olympus fe-170 not recognized by windows 7

Similar Questions

• USB SD card reader is not recognized by Windows XP.

  None of the previous posts here helped me. Here, I write again.
  When I plug my SDHC Targus card reader I receive a "USB device" balloon unrecognized in the taskbar.
  So, what are we doing about it? I suspect that the Targus seller should have provided a special driver for that.

  Note that this goes on my IBM laptop and my desktop Dell two very fine model material. Both XP running.

  Thank you
  Mike

  Hello MikeLupo,

  Thank you for your message.  Other USB devices work on your computers?  If so, which can exclude the USB port.  This would lead us to a driver problem.  Your computers are up-to-date on Windows Updates?  Execution of Windows updates can load drivers that may correct this problem.  You can also click HERE and enter your SD card reader model and possibly download a driver.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• USB 2.0 devices are not recognized on Satellite L

  Hello

  All of the usb 2.0 device is not recognized on my laptop.
  I got a message stating that the driver are not installed. I'm looking for the driver on the support site, but could not find them...
  I've updated the bios and chip set utility, but still nothing.

  Any idea?

  Hello

  What model of laptop do you have?
  What operating system do you use?
  Since when you noticed this problem?
  Did you test all USB ports?

  Have you tested with different devices USB ports?

  Please post a little more information.

• USB printer (Canon MF4150) is not recognized. Please help. __

  USB printer (Canon MF4150) is not recognized.  Help, please.
  What I tried:
  remove the printer
  Uninstall and reinstall the printer drivers
  printer plugged into every usb port, all working with other equipment
  plugged the printer with a different usb cable.
  stop, and then turn on the printer.

  Thanks in advance.

  Hello murrcat,

  Thank you for visiting the Microsoft answers community.

  To ensure that the procedure for this particular model is followed during the installation, please take a look at this .pdf of Cannon under the install/uninstall software.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to view videos of the Kodak Easyshare touch camera: the selected file has an extension (.) (THM) which is not recognized by Windows Media player.

  Camera video will not play on the computer

  I recently bought a Kodak EasyShare touch camera.  Love it, but for some reason some will not play videos from the camera to my computer.  He will say: the selected file has an extension (.) (THM) it is not recognized by Windows Media player.  Any suggestions?

  . THM is a thumbnail of the file... not a video file. I suspect that your
  Kodak records in the. MOV or possibly. Film MP4 format.

• USB device not recognized in windows 7

  USB device not recognized in windows 7

  Hi eyadOdetallah,

  -Is the issue specific to a particular USB device?

  -What software changes you did on the computer before the show?

  Follow the steps below:

  Method 1:

  Run the hardware and devices Troubleshooter to run the automated troubleshooting services.

  Open the hardware and devices Troubleshooter

  Disable and re-enable all the USB controllers.

  Method 2:

  This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  a. Open the Device Manager.

  b. expand Bus USB controllers.
  
  Note that you have to scroll down to find this point.

  c. right-click on the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• My keyboard is not recognized by windows when connected to the USB ports.

  My keyboard is not recognized by windows because that is malfuncioned or something else, that's what I get a message when I insert the keyboard to the usb port that could do because the ports are fine.

  Original title: keyboard problem

  Hi Caragata,

  Perform the steps from the link below and see if it works.

  Tips for solving problems of USB devices

  Note: This article also applies to Windows 7. If the fix it does not work, you can then run the built-in utility.

  Good day!

• My new Canon 70 d is not recognized by Windows 10 anniversary.

  Anniversary of 10 Windows running under Parallels 12 on a new MacBook Pro.

  Plug my 6 d and that it appears in the devices.

  Plug my 7 d and it does NOT appear in the devices.

  I have two other (not Canon) cameras that work with Windows.

  Using the same USB cable for two Canon cameras. Even tried another cable.

  I have two new cameras: 6 d and 70 d.

  The 6 d is modified and cooled by DS Central.

  The 70 d is original.

  MacBook Pro with 16 GB of memory running macOS Sierra.

  Using the same cable for two cameras, EOS Utility 3 that was installed for the 6 d running.

  The 6 d is recognized by the works and EOS Utility 3.

  The 70 d is not many EOS Utility 3 or EOS Utility 2.

  And curiously, the 70 d is also not recognized by Windows 10 (update birthday, running under Parallels on the MacBook Pro 12).

• Webcam not recognized in Windows XP with VMware Fusion

  I use VMware Fusion 2.0 on a Macbook Pro with Windows XP.  I've been using Yahoo Messenger with the iSight webcam and I think I accidently deleted the icon at the bottom of the VMware window and now the web cam is not recognized in Windows at all.  The iSight camera works just fine under MacOS, but I can't find how to do Windows or VMware recognizes the camera.  I guess I could reinstall VMware and it might solve the problem but I'm looking for an easier route when it exists. Someone at - it a similar problem?

  Thank you

  Dennis

  Have you checked the settings of your virtual machine to see if the isight is activated must be forwarded to the VM?  You might consider checking or setting these options under usb.  Also if you have version 2.0 only then you can consider update 2.0.5 before reinstalling VMware.

• Stor.e slim not recognized by Windows 8.1

  Hello

  A Stor.e slim external HARD drive is not recognized in Windows 8.1 (no problem with Windows 7). When it is plugged in, it s shown as a device not recognized. Driver is requested but not found.

  Hello

  Stor.E Slim external HARD drive is a 2.5 HDD USB 3.0 and 900mA power it requires to work correctly.

  I suppose that there is nothing wrong with this HARD drive, but with your laptop.

  8/8.1 win requires different drivers and you will probably need to install a suitable driver in order to get the USB ports work correctly (USB 3.0 as well as the driver additional chipset would be also necessary).

• Pavilion 550-122nd: Laserjet 1018 is not recognized in Windows 10

  LaserJet 1018 is not recognized in Windows 10 of 155-122nd Panilion.

  The "result of software and driver for laserjet 1018' has not failed (new driver)

  USB ports active aere

  Do I need a new driver for Windows 10?

  Is a new availabe driver for Windows 10?

  Thank you.

  Hello and welcome to the community of HP @Rikkie1,

  I understand that you're having trouble installing the drivers for your HP LaserJet 1018 on your computer Windows 10. I will do my best to help.

  Only the integrated Windows Print Driver is compatible with the HP LaserJet 1018 on Windows 10. Below, I have posted a link to a document that has some instructions on how to install and use the integrated Windows print driver. Please try all the steps in order and get back to me with the results.

  HP print driver printer - install and use the built-in Windows

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• CD/DVD drive not recognized by Windows all of a sudden

  The opitical drive had been used with problem. I removed a couple of days and when I came back it is no longer listed in "MY Computer". Put everything in the disc drive is not recognized. The drive does not appear on the list th of the material system. The drive has power since it extends and retracts. He tries (the light) to play the disc but stops.

  Hi Ranamaska,

  You can follow this link & check if the problem persists:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the following article: 322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows?

  Hope the helps of information.

• .mov file extension is not recognized by Windows Media Player

  original title; Media Player

  When I try and play a movie on my camera which is a Canon I get a message that says this file has an extesión (mov) and is not recognized by windows media player, what should I do to correct this

  You (possibly or) missing a codec.

  I suggest you only install this codec pack.

  http://www.free-codecs.com/download/Vista_Codec_Package.htm

  Main Page: click, download Vista Codec Package

  Second Page:

  Download Vista Codec Package 6.3 first a: 32 bit .zip File

  Download Vista Codec Package 6.3 second one: 32-bit .exe file

  Download Vista Codec Package 6.3 third one: 64 bit .zip File

  Download Vista Codec Package 6.3 fourth one: 64-bit .exe file

  This is the free safe and the best package on the web.

  He'll play 99% of files, so you will not need to download or use other programs.

  You can check here to see what's on your system.

  To check: Open Media Player, click Help in the menu, on the Windows Media Player, Technical Support information.

  Click here to see if you have 32 or 64 bit:

  Control the look of Control Panel, system, under System Type:

• CD or DVD drive is missing or is not recognized by Windows

  Original title: another question about the DVD drive is not detected in Windows 7

  I have the same problem that many others have described here on the DVDR drive not detected after installing Windows 7. I still have not solved this issue. But I have another similar problem. The system will not recognize an external USB DVDR drive connected to a USB port. In essence, I have no access to the internal drive (in a Dell Inspiron 1545) or the external hard drive. Without access to a DVD player I can't even uninstall Windows 7, and I can not install or save anything else without a drive. I'm at my wits end. If anyone can help I will shower you with praise.

  Hi Therevmrbill,

    
  Scenario 1:
   
  
  Reference:
  
  Your CD or DVD drive is missing or is not recognized by Windows or other programs.
  http://support.Microsoft.com/kb/982116
    
  Scenario 2:
  
  1 try to connect the DVD USB drive on another computer and check if the problem persists.
  2. try to connect other USB devices to the computer and check if it is detected.
  
  Try to run the troubleshooter and see if the problem is resolved.
  
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Description of the problem:

  Optical drive is not recognized in Windows 8.1 (x 64) or in the UEFI System Diagnostics.

  Steps to recreate:

  UEFI:

  1. Start the PC in diagnosis system UEFI (F2 at the STATION)
  2. Pane controls
  3. Optical drive
  4. Sequential control
  5. Error: Optical drive not installed.

  8.1 Windows (x 64):

  1. Run Device Manager
  2. Error: No CD/DVD Drives section.
  3. Search for new hardware changes nothing.

  Relevant system specs:

  Mobile: HP Pavilion 15-n023sa (construction of vanilla)

  Optical drive: HP DVDRAM gu70n

  Steps already taken to solve:

  • Replaced the DVD drive with one of the similar specs of HP Pavilion. The replaced gn70n perfectly in the other machine. No change on problem laptop. Conclusion: DVD player works, and there is no problems with Windows 8.1 (x 64).
  • Removed DVD player. Restarted the computer. Sign in to Windows. Stop. Replace the DVD drive. Start the laptop. This is trying to solve defects of material with the PnP devices; more help to solve any problems of intermittent loose connection. Conclusion: No change.
  • Ran, troubleshooting of hardware and devices, via the control panel. Problem found: material changes may not have been detected. Explore more options just takes you through http://social.answers.microsoft.com/search/en-us/?query=hardware+device, that it is a 404 error page. Conclusion: Help and Support Windows is sorely lacking. They show no more information than just that something was detected as incorrect.
  • Ran the Microsoft FixIt troubleshooting of optical disc and auto repairman. (http://download.microsoft.com/download/F/5/8/F586FB7C-78E0-40EB-AF41-4C925F803CAF/CDDVDWin8.meta.dia... The convenience store has reported that the device was not found. He recommended to remove all power cables, power off, and various other things which have no relevance for computer laptop troubleshooting of switching equipment. He said: If the problem persists, contact the manufacturer. Conclusion: Windows troubleshooting can not solve the problem.
  • Run Windows Update to ensure that all updates and definitions have been installed. Conclusion: Windows is perfectly up to date.
  • Run a complete Rootkit and malware using Sbybot S & D 2.3 heuristic analysis. as a signature database scan using Windows Defender. Conclusion: Laptop is clean of rootkits and malware, to the best of my knowledge.

  Notes:

  The DVD player is NOT appear in Device Manager, OR in this PC.

  The DVD drive is NOT detected by diagnostics system UEFI.

  There is reference to the DVD in BIOS drive NUMBER , other than as an option of Setup, which is generic.

  The DVD player itself, works and has been verified on a different machine.

  The only possible conclusion is that the optical drive port mini-SATA on the motherboard is dead.