OME 1.3 installation hangs on "loading prior information.

Similar Questions

• VMware ESXi 3.5 U3 Installation hangs while "loading module ide."

  Hello.

  I tried to install ESXi on a server (motherboard: Supermicro P4SDA;) Processor: Pentium 4; 3 x HDD: Samsung SP0411N & 2 x WD 400BB) and installation stops while loading add-on ide...  And that's it, no error messages - nothing.

  How can I get rid of this problem?

  Thank you!

  Had a similar problem on a box.  He had a problem with the onboard IDE drive.

  Disabled the onboard IDE and a USB DVD drive to install ESXi.

  Not sure if this will help, but the suggestion that' her.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

  

• VMware ESXi 3.5 U3 Installation hangs while "loading module sata_svw.

  I tried to install ESXi on a DELL 2970 with PERC 5 / i and the installation stops while loading module sata_svw...

  the last entry in the log of the kernel is:

  WARNING: LinSCSI: 3494 driver didn't scsi_done of its abort handler and yet he returned SUCCESS

  How can I get rid of this problem?

  Thank you!

  Hello

  had the same problem, its clearly the sata on the PE2970 :_| device.

  If you turn off (both) controller sata in BIOS Setup will work. Pretty sad: you won't miss your CD-Rom I drive so I used a USB CD-ROM for installalation.

  I know that this is only a workaround, cause I need the CD of shortcut for the guest computers, but I hope that there will be an update of the driver soon.

  Respect of

  Thomas

• vSphere 4.0.0 Update 1 installation hangs on "loading image.tgz".

  I try to install vSphere 4.0 ESXi on a new server:

  Mother SATA superMicro SuperServer 6025 B

  Intel E5405 2.0 GHz CPU quad-core 64-bit

  8 GB OF DDR2 ECC RAM

  9690 storage controller - SA GCCA 3Ware

  I have not created any volumnes RAID, and I just 2 hard drives 1 TB in slots 0 and 1.

  When I boot on the installation CD, the unpacking of compressed files continues until "Loading image.tgz" how Setup does nothing and is blocked indefinitely.

  As far as I know, all my system components are compatible.

  What I am doing wrong?

  It sounded just like ESXi was the better (and easier) way to go.

  That is right. From what I've heard and read, it will also be the future of ESX...

  but I don't like as long as I can get it installed and running with a minimum of fuss.

  I agree with you. ESX taking action a little more during installation and update, however it works in the same way as ESXi (with the exception of the Service Console).

  André

• OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

  Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted. Now my computer does not even recognize the OfficeJet when you plug into the USB port.

  Need help why computer does not recognize the printer no matter what I do and how to get the computer to download the driver.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe
  Then, run the Setup file and check all difference

  Kind regards
  Shlomi

• Vsphere installation 5 hangs on "Loading module e1000.."

  I'm trying to install VMware vsphere 5 on a HP DL385 G1, but when I run the Setup it hangs on "Loading module e1000.."

  I know that only the DL385 G1 doesn't support vsphere, but I found the post saying he did install without problems.  http://communities.VMware.com/message/1851113

  Here's what I have on the DL385 G1

  Processor AMD Opteron 275 x 2.20 GHz (1 MD L2)

  HP BIOS A05 01/03/2006 (the most recent version of HP)

  Integrated NIC HP NC7782 Gigabit Server Adapter

  Slot PCI card NETWORK HP NC7170 Gigabit Server Adapter

  Thanks in advance for any help you can provide.

  E

  disable the pci network card and see if it works.

• XP SP3 installation hangs

  The installation hangs when the 'execution process after installation' I removed and tried it 4 times the same thing happens every time and SP3 is necessary to use TurboTax2011.  It is a single computer currently running XP Media Center Edition 2002.  Help, please!

  Hello

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For reference:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Satellite A105-S1014 - BIOS hangs during loading

  Hi all

  I'm working on an A105-S1014. the problem is that when trying to boot the system, the bios starts to load, but it freezes. There is a bar of progression at the bottom of the screen and it stops just about 2/3 of the way. This is a laptop that has been abandoned so that on. Initially, he was stuck in a reboot loop. One of the memory modules was knocked loose so I reinstalled them both. Now im stuck and cannot get the bios to complete loading. Ive opened the laptop and checked all the connections and wires to make sure that nothing else is loose or disconnected. I tried to exchange the memory one at a time and can not think of anything that would stop the bios to load a configuration jacked up. I can't reset the cmos because the battery is soldered in place and there are no jumpers that I see.

  Any ideas? Thanks in advance :)

  Hi Theeone,

  Usually if the BIOS hangs while loading procedure, there seems to be a serious hardware problem but I don t know what part is assigned exactly

  In your case I would try this first:
  Remove the battery and the AC adapter, now wait at least an hour. Reconnect the battery and the AC adapter / CC and try to start the laptop.
  It work?

  If this isn't the case, you need professional help of an authorized service I think. Guys should check what part is affected and needs to be replaced. ;)

• VMware 5.5.1 installation hangs at the end in XP Pro Sp3

  Then the installation hangs and won't be finished install but progress bar is just at the end have waited over an hour for her to finish - by using the administrator account.

  A folder for it but I don't see in the start menu.

  You know not so completely installed or missing components.  Nothing in Add/Remove programs related to it, so I think not completely installed.

  How to install XP or is there another version number which can do a physical examination to the conversion of the virtual machine of multiple partitions (drive by keeping letters) to a conversion of an existing for a guest of computer virtual of XP Sp3 XP run on Windows host 8.1 - hyper-v or vmware player prob / virtual box?

  Thank you very much.

  Also these: cmd prompt: netsh int ip reset resetlog.txt
  then netsh winsock reset catalog.
  Then reinstalled the NIC drivers as suggested.
  Also put the installer program office (extract the Installer file) and which ran on reboot.
  FIXED - after that restart could install all services installed in the end and shortened came office - running he opened the program.

• Standard of 6 CS installation hangs up on 'Close these applications.' Safari is closed. Now what?

  CS 6 Standard installation hangs at "close these applications: Notifications Safari.» Safari is closed, I do not see Active notifications. Someone knows what to do?

  Guest of installation of close SafariNotificati

  https://helpx.Adobe.com/Acrobat/KB/install-prompt-close-safarinotificati.html

• Adobe Flash Player installation hangs at 25%

  I did a clean uninstall of Flash Player - no use-installation hangs at 25%.

  using Mac OX X worm. 10.10.2

  IT FIXED!  ... by following these instructions:

  How to do a 'clean' Flash Player installation in Mac OS X

• Download flash Installer hangs at 30% then fails every time

  Hello, I'm running a MBP 2012 retina.  I download the latest version, but the Installer did pause for one minute in download (at the 30% mark) and then fails.  "The connection has failed.  Unable to complete the installation.

  I tried the rest of the solution in this thread:

  Flash Player installer hangs at 95%

  But I do not see the .pkg file in the downloaded .app file.  I'm not under antivirus and I restarted.  I used uninstall as well.  I use Safari.

  Any suggestions?

  Thank you

  Chris

  Managed to solve myself (see this thread: How to perform a "clean" Flash Player install in Mac OS X)

  Thanks for all the replies so

• First Pro CC hangs after "loading media".

  Last week I had to Exchange my media from one HARD disk to another.

  Loading following the project of creation where crashed just after the "loading media" bar, has ended.
  No signs or whatever it be open as not expected. And first became completely unresponsive.

  I went back to the use of the original copy of the HARD drive, but I still had the same problem.
  My soultion was to create a completely new project and import my media.

  Today the same thing happened but I never moved the images on the HARD drive.
  The second project now hangs after "loading media" too.

  Other projects where all the files are on my internal HDD are fine.

  No error report is generated, and I have a small chance to be able to open the Task Manager to close the first. Usually, I have to pull the plug to turn it off because it seems like using 100% of my use of the disk.

  Everything is updated (6.0.5) and I am on Windows 8 (sorry don't know what data you need :/))

  Any help would be much appreciated!

  Try this:

  https://blogs.Adobe.com/genesisproject/2011/02/Premiere-Pro-CS5-maintenance-two-great-tips .html

• ESXi 4 Installation hangs

  Hello

  I try to install ESXi 4 on a HP DL380 G6, leave a .iso downloaded from the VMWare website. When the installation gets to "loading ipmi_si_drv", it crashes. I read the previous posts on the 1 h 10 min wait, and I'm still waiting (50).

  The version is 171294, Server 2 Intel Xeon CPUs and standard network card config.

  Any help would be appreciated,

  Concerning

  RedBike

  I'll make sure that you have the latest firmware of HP. Download the Firmware CD on HP website under downloads windows.

  Get the version of ESXi 4 HP on HP website.

  There is a firmware ILO listed under ESXi 4 on the dl380 G6 page. I don't think that it is different than on the CD firmware but check it out. ILO is the ipmi interface

• The installation hangs at 25%

  I just purchaesed Dreamweaver CS6 student & Teacher Edition. The installation hangs at 25%. I tried uninstalling and reinstalling, boot without failure, as an administrator and even clean the registry with Ccleaner. Same result EVERY time. I have other products installed (CS5 Design Premium) and am running Windows 7 Ultimate x 64. Any Suggestons?

  I just killed the AdobeHelp.exe and finished

  -Dan