The installation hangs at 25%

Similar Questions

• Upgrade Photoshop CS5 but re-installing the installation hangs

  After a restoration of the system, in an attempt to re - install my Photoshop CS5 on my Windows 7 PC, it remains at a standstill.  It reached a point where the "install now" does not move, but the "Total remaining time", continues to rise, have tried to get this installed for two days.  At one point 'Total remaining time' had reached more than 800 minutes with 5% full.  On this last attempt to install, he went up to 296 minutes with 15% full, and then kept fluctuating up to 280 minutes 14% then up to 305 minutes 15% complete.  At this time I just let it run.  Before he was at a standstill with the help of Adobe, now it's at a standstill on Adobe Air.

  I have restarted this facility several times, uninstalled and reinstalled my previous versions of Photoshop, and tried again.  Made sure all other programs/applications are closed and my internet connection was solid.  I don't know what to do or try next.  From now to 337 minutes still 15% Complete and always on Adobe Air.

  I gave it one more try and note here for others that may encounter the same problem, how I was finally able to install Adobe Photoshop CS 5.

  When you get to the screen to select what to install for Photoshop CS 5, if as in my case, you have the 64-bit, do verify THAT the 64-bit (if the 32-bit is checked to remove the check mark) and remove the check mark from Adobe Air.  This does the trick and will install properly.

  I noticed at the guarded facility is at a standstill has either using Adobe or part of Adobe Air installation.  I think that it is possible that because I already had the air latest Adobe on my computer (I have 5 other adobe products) that she, in other words, "caused an insurmountable difference of opinion between the installation and the computer".

  I do thank you very much for your time and try to help solve this problem.

• When I try to install photoshop menu appears and the installation hangs

  Can anyone help with this?

  Do you mean that?

  WHITE cloud screen http://forums.adobe.com/message/5484303 can help

  - and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html

  - and step by step http://forums.adobe.com/thread/1440508?tstart=0

• VMware 5.5.1 installation hangs at the end in XP Pro Sp3

  Then the installation hangs and won't be finished install but progress bar is just at the end have waited over an hour for her to finish - by using the administrator account.

  A folder for it but I don't see in the start menu.

  You know not so completely installed or missing components.  Nothing in Add/Remove programs related to it, so I think not completely installed.

  How to install XP or is there another version number which can do a physical examination to the conversion of the virtual machine of multiple partitions (drive by keeping letters) to a conversion of an existing for a guest of computer virtual of XP Sp3 XP run on Windows host 8.1 - hyper-v or vmware player prob / virtual box?

  Thank you very much.

  Also these: cmd prompt: netsh int ip reset resetlog.txt
  then netsh winsock reset catalog.
  Then reinstalled the NIC drivers as suggested.
  Also put the installer program office (extract the Installer file) and which ran on reboot.
  FIXED - after that restart could install all services installed in the end and shortened came office - running he opened the program.

• Through the installation of voice in Win & RC 32-Bit - upgrade to Portuguese.

  Hello. I tried to install via voice (Portuguese), as Win 7 doesn't support speech recognition in Portuguese for the moment.
  I tried several times, but the installation hangs. (as administrator, earlier versions of Windows, etc)...
  I uninstalled IE8 and the installation went further, but has not ended.
  How can I install Via Voice? Please?

  Hi PKBrasil,

  Thanks for posting on community forum is ready for Windows 7.

  Here is a link that provides more information about language packs for Windows 7.

  http://support.Microsoft.com/default.aspx/KB/967828

  My understanding of the position, you try to install something via the Portuguese speech recognition feature and installation, to what it is, is not install properly?

  Try to start with as minimal a Setup on your system will allow.

  Here are the steps to a clean boot process, however, before you are able to install you may need to identify the services which need to be present before installation will take place.

  Hello Charmedbysarah,

  Thanks for posting on the forum of answers.

  I suggest to try a Cleanboot to see if the problem occurs. If it does not occur when you are in a cleanboot, then use the steps in the article to narrow down the cause of the problem, http://support.microsoft.com/kb/929135.  (Note: this article is referenced for Windows Vista, however, the steps are the same for Windows 7)

  Step 1: Perform a clean boot Note if the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. Log the computer by using an account with administrator rights.
  2. Click Start
     

     , type msconfig.exe in the box start looking for and then press ENTER to start the System Configuration utility.

     

     If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  3. On the general tab of the , click on selective startup of , and then click to clear the load startup items check box. (The box use the file Boot isn't available.)
  4. Under the Services tab, select the hide all Microsoft services checkbox and then click disable all.

     Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. Click on and then click OK on restart.

  Debbie
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• XP SP3 installation hangs

  The installation hangs when the 'execution process after installation' I removed and tried it 4 times the same thing happens every time and SP3 is necessary to use TurboTax2011.  It is a single computer currently running XP Media Center Edition 2002.  Help, please!

  Hello

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For reference:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• W2003 freezes on the installer on a PE2900

  Hi guys,.

  I don't understand, I can't seem to get a windows installed on my PE2900 when vmware even linux (suse) are not a problem.

  Every time when I install by generation tools or to start the DVD directly, the installation hangs after a few second to blue screen "windows setup". I tried with RAID 10, RAID 5, same result.

  I need help, I can't waste any more time on this.

  is there something I need to know to install a microsoft OS?

  Thank you very much

  Fred

  
  

• BI installation hangs on step 5 - Administrator Details

  Hello
  
  I downloaded Oracle Business Intelligence, v. 11.1.1.3.0 and try to install it.
  
  But the installer hangs on the details page administrator - step 5, after checking the settings of all other systems are very good!
  
  I checked several times that I have enter valid administrator username and password.
  
  What could be the problem and how can I get in this step, please?

  LeonMatch,

  You will need to install the loopback adapter to fix this password error during the installation of 11 g. Its a sine qua non for OBIEE 11 g to call the IP of the host file. It is defined in this way, you can go through the documentation for it.

  Instructions to install rear loop:

  To manually install Microsoft Loopback card in Windows XP, follow these steps:
  1. click on start and then click Control Panel.
  2. If you are in Classic view, click on switch to the display of the categories under control panel in the left pane.
  3. double-click on printers and other devices, and then click Next.
  4. under See also, in the left pane, click Add Hardware, and then click Next.
  5. click on Yes, I have already connected the hardware, and then click Next.
  6. at the bottom of the list, click Add a new hardware device, and then click Next.
  7. click on install the hardware that I manually select from the list and then click Next.
  8. click on network adapters, and then click Next.
  9. in the manufacturer box, click Microsoft.
  10. in the network adapter box, click the Microsoft Loopback adapter, and then click Next.
  11. click on finish.

  After that, go to the network configuration and look for the back loop network adapter and configure it with a static IP address, such as (192.168.1.1) as follows:

  After the step above, if the box has lost the network connection to the rest of the real network. Then go back and re - configure the network adapter physical in the way it was (for example, DHCP). Because of the feedback loop, the LISTENER. ORA should be updated to reflect the new static IP address assigned above as part of the configuration of loop back.

  Kind regards
  -Laurence.

• Flash Builder 4: Installation hangs

  Hello

  just download Flash Builder 4 and try to install, but the installation hangs on display "install...". ». What are the causes of the problem?

  I use Windows XP SP3.

  Where did did you extract your Installer to? There is a known bug where a subcomponent hangs during installation on windows, when the path contains a space https://bugs.adobe.com/jira/browse/FB-26442leader.

  Jason San Jose

  Software engineer, Flash Builder

• Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also used faster then the previous version.

  Since the installation of the latest IOS i.e. IOS 10.0.1 and 10.0.2, my phone is very slow, especially the contacts do not appear in the search and the camera hangs on startup. the battery is also faster, then the previous version, use 6s with 64 GB

  Hello naqvi65,

  I see that you have several problems with your iPhone after updating to the latest version of iOS. These issues include problems of performance, inability to find contacts at a Spotlight search, problems with enforcement camera freeze after the launch and the battery discharge more quickly than what you are accustomed. I want to help you find a solution for these questions!

  To answer your questions with performance and your inability to find contacts, we will try to restart your iPhone first to see if the problems persist. Take a look at this resource for more information:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Take a look at this Web site using your photo app troubleshooting:
  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  To keep an eye on your battery use, take a look at the information here:
  On the use of the battery on your iPhone, iPad and iPod touch - Apple Support

  To help maximize your battery performance, this site has some good tips for iOS devices:
  Batteries - maximize Performance - Apple

  See you soon!

• After the installation of Office 2003, Word hangs on a Tecra A3

  Hello

  On my Toshiba Tecra A3 (1.86 GHz Pentium, 1 GB RAM) I had until yesterday Office 2000 it emits the ideal way.
  Now, I installed Office 2003 and I am unable to work with Word.

  The program hangs on each file that contains a single piece of simple photo or clip art. I can't believe it. A re-setup of Word did not help. Now, I installed again in parallel Word 2000 and it works flawless.

  THX if someone can give an opinion

  Antonio Giarrusso

  Hello

  You must perform a new installation of Office 2003.
  First remove all files and the former software office 2000 registry keys and then perform a new installation.
  After the installation of Microsoft Office 2003 Download all patches and updates on the Microsoft site.
  The use of the CCleaner is very useful, because this tool checks the programs and the entries in the registry for certain shortcomings

• Since the installation on my Windows 7 64 - bit installed, Firefox has constantly gotten slow that hour passes, hangs for 10-15 seconds at a time and just gets worse over time with updates and all.

  Since the installation on my Windows 7 64 - bit installed, Firefox has constantly gotten slow that hour passes, hangs for 10-15 seconds at a time and just gets worse over time with updates and all. It was fast when I installed first, but of the six latest mos has slown to a crawl.

  upgrade your browser Firefox 8 and try

  • getfirefox.com

• Satellite L300 - product recovery disk hangs on step 2 of the installation program

  The product recovery disk will not work, it hangs on step 2 of the installation program.

  Help appreciated

  Hello

  Do you mean you cannot create the recovery disk or do you mean that you cannot complete the installation of recovery procedure?

  If you can not finish to create the recovery disk, then you must test different drives from different manufacturers. In most cases, this helps

  I m with Verbatim DVD-R

• The DirectX Web Installer hangs during installation of the components

  I try to get several games running, but am stuck by the demands to DirectX 9 c. My machine is Windows 7, so it's DX11 installed. I went here to download the web installer:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2da43d38-DB71-4C1B-bc6a-9b6652cd92a3&displaylang=en

  When I run the installer, it downloads the components, then hangs on "Installation of components. It displays the message "copying files...". "and the 1.0.2910.0/Microsoft.DirectX.Direct3DX.xml

  One of my CPU is maxed out running dxwsetup.exe * 32 and this for hours. My computer is a Dell with Windows 7 64 bit.

  Are there instructions anywhere to update DirectX to hand?

  Thanks for any help.

  Steve, thanks for your suggestion. Running at startup using the minimum does not solve the problem, but it got me thinking in the right direction.

  I finally put in the Win7 disc and 'fix '. It is really a re - install, but the programs and data are stored.
  It took a few hours to go through the installation, but after that, I ran the DirectX Web Installer smoothly. Played some BioShock 2 last night!
  Thank you

• OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

  Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted. Now my computer does not even recognize the OfficeJet when you plug into the USB port.

  Need help why computer does not recognize the printer no matter what I do and how to get the computer to download the driver.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe
  Then, run the Setup file and check all difference

  Kind regards
  Shlomi