vSphere 4.0.0 Update 1 installation hangs on "loading image.tgz".

Similar Questions

• Dell Precision 490 - Installer reboots after loading install.tgz

  Heya,

  I'm trying to install VMWare ESXi Update 1 4.0 on a Dell Precision 490 workstation. (Yes, not on HCL, I think).

  In any case, I boot on the CD, and it proceeds along until the "Loading image.tgz" Stadium, after which it restarts without delay.

  I took a video of the process, and in the last screen, just before the restart, he says:

  Module: install.tgz

  Loading install.tgz...

  Start-up: MBI = 0 00010150 x, entrance = 0 x 0...

  I tried to add that the 'noACPI' switch to the boot options, same result.

  There seems to be something similar to what occurred here:

  http://communities.VMware.com/thread/263240;JSESSIONID=9C89E876F761BC5E6D528BBB5ABC810F?TSTART=30

  But there is an answer. (I posted here to see if the author has managed to operate).

  See you soon,.

  Victor

  What you use for storage in the PWS490? What the rest of the specification of it (processors, amount of RAM, etc.)? Have you tried to install ESXi on a USB key (a device 2 GB +, SanDisk Cruzer work)?

  Once I have my iSCSI SAN built, I'll be able to see how to boot from the USB goes on my Tower of PWS490... Should be some time later in the day...

  VMware VCP4

  Review the allocation of points for "useful" or "right" answers.

• VMware ESXi 3.5 U3 Installation hangs while "loading module sata_svw.

  I tried to install ESXi on a DELL 2970 with PERC 5 / i and the installation stops while loading module sata_svw...

  the last entry in the log of the kernel is:

  WARNING: LinSCSI: 3494 driver didn't scsi_done of its abort handler and yet he returned SUCCESS

  How can I get rid of this problem?

  Thank you!

  Hello

  had the same problem, its clearly the sata on the PE2970 :_| device.

  If you turn off (both) controller sata in BIOS Setup will work. Pretty sad: you won't miss your CD-Rom I drive so I used a USB CD-ROM for installalation.

  I know that this is only a workaround, cause I need the CD of shortcut for the guest computers, but I hope that there will be an update of the driver soon.

  Respect of

  Thomas

• VMware ESXi 3.5 U3 Installation hangs while "loading module ide."

  Hello.

  I tried to install ESXi on a server (motherboard: Supermicro P4SDA;) Processor: Pentium 4; 3 x HDD: Samsung SP0411N & 2 x WD 400BB) and installation stops while loading add-on ide...  And that's it, no error messages - nothing.

  How can I get rid of this problem?

  Thank you!

  Had a similar problem on a box.  He had a problem with the onboard IDE drive.

  Disabled the onboard IDE and a USB DVD drive to install ESXi.

  Not sure if this will help, but the suggestion that' her.

  Jase McCarty

  http://www.jasemccarty.com

  Co-author of VMware ESX Essentials in the virtual data center

  (ISBN:1420070274) Auerbach

  _{Please consider awarding points if this post was helpful or appropriate}

  

• OME 1.3 installation hangs on "loading prior information.

  Title says it all. I have built many virtual machines all with the same result. I'm using Server 2008 R2 x 64 with IE 11 / .NET 4.5.1 is installed with all Microsoft updates. IE ESC is disabled.

  The circle just guard spinning forever.

  Any ideas?

  Chris-

  Make sure that the installation program downloaded is not restricted by click right properties.

  Make sure that the user running the installation as an administrator.

  Let us know!

  PPrabhu

• Photoshop CS6 bridge hangs on loading image in Photoshop

  Bridge CS6, text in the folder window freezes after loading an image of the bridge in PhotosShop CS6.  The bridge is rendered useless.  Closing Photoshop releases bridge.  Bridge does not update the type in the files window and UN-attached leaves partial tiles of images in the content window.  This time from esch takes place one image is loaded bridge in Photoshop.

  Photoshop CS6 & Bridge have been updated at 11:47 AM PST today 2012-12-07

  Win 7 64 X Professional latest updates from 2012-12-02

  Intel Core i7 Quad Core 950 3.06 GHz, 8 MB

  12 GB OF RAM

  EVGA GTX 460 GrForce - 1 GB graphics card

  'C' drive Intel X 25 120 GB SSD

  Work drive Intel X 25 120 GB SSD

  Two (2) hard drives 1 storage to

  Hi Jeff,

  I have the last video player for Win-7 64 x.

  Thanks for the tip, looking for the info pilot under 'Start', I discovered > "All programs" > "Nvidia Corporation" > "3D Vision" > "disable 3D Vision.  By disabling the "3D view" in the "all programs" menu cured the problem.  Kind of a strange place for a 'switch '.

  Hope this helps someone else as it was a very frustrating problem!

  Esch_ay

• Vsphere installation 5 hangs on "Loading module e1000.."

  I'm trying to install VMware vsphere 5 on a HP DL385 G1, but when I run the Setup it hangs on "Loading module e1000.."

  I know that only the DL385 G1 doesn't support vsphere, but I found the post saying he did install without problems.  http://communities.VMware.com/message/1851113

  Here's what I have on the DL385 G1

  Processor AMD Opteron 275 x 2.20 GHz (1 MD L2)

  HP BIOS A05 01/03/2006 (the most recent version of HP)

  Integrated NIC HP NC7782 Gigabit Server Adapter

  Slot PCI card NETWORK HP NC7170 Gigabit Server Adapter

  Thanks in advance for any help you can provide.

  E

  disable the pci network card and see if it works.

• XP SP3 installation hangs

  The installation hangs when the 'execution process after installation' I removed and tried it 4 times the same thing happens every time and SP3 is necessary to use TurboTax2011.  It is a single computer currently running XP Media Center Edition 2002.  Help, please!

  Hello

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  For reference:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• OfficeJet J4550: Could not load the driver for the WIN10 - installation hangs

  Updated my Dell XPS to WIN10. I tried to upgrade the driver for my J4550 but installation hangs at the beginning of the installation process, "control systems".  When I tried the download, the old files from HP devices detected HP program and deleted. Now my computer does not even recognize the OfficeJet when you plug into the USB port.

  Need help why computer does not recognize the printer no matter what I do and how to get the computer to download the driver.

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, run the following tool:
  FTP://ftp.HP.com/pub/Printers/datfileremover/installdatfileclean.exe
  Then, run the Setup file and check all difference

  Kind regards
  Shlomi

• BI installation hangs on step 5 - Administrator Details

  Hello
  
  I downloaded Oracle Business Intelligence, v. 11.1.1.3.0 and try to install it.
  
  But the installer hangs on the details page administrator - step 5, after checking the settings of all other systems are very good!
  
  I checked several times that I have enter valid administrator username and password.
  
  What could be the problem and how can I get in this step, please?

  LeonMatch,

  You will need to install the loopback adapter to fix this password error during the installation of 11 g. Its a sine qua non for OBIEE 11 g to call the IP of the host file. It is defined in this way, you can go through the documentation for it.

  Instructions to install rear loop:

  To manually install Microsoft Loopback card in Windows XP, follow these steps:
  1. click on start and then click Control Panel.
  2. If you are in Classic view, click on switch to the display of the categories under control panel in the left pane.
  3. double-click on printers and other devices, and then click Next.
  4. under See also, in the left pane, click Add Hardware, and then click Next.
  5. click on Yes, I have already connected the hardware, and then click Next.
  6. at the bottom of the list, click Add a new hardware device, and then click Next.
  7. click on install the hardware that I manually select from the list and then click Next.
  8. click on network adapters, and then click Next.
  9. in the manufacturer box, click Microsoft.
  10. in the network adapter box, click the Microsoft Loopback adapter, and then click Next.
  11. click on finish.

  After that, go to the network configuration and look for the back loop network adapter and configure it with a static IP address, such as (192.168.1.1) as follows:

  After the step above, if the box has lost the network connection to the rest of the real network. Then go back and re - configure the network adapter physical in the way it was (for example, DHCP). Because of the feedback loop, the LISTENER. ORA should be updated to reflect the new static IP address assigned above as part of the configuration of loop back.

  Kind regards
  -Laurence.

• I had to replace my hard drive and I only have a disk of windows XP Prof. Update My installation aborts because she wants is a full version. What should I do

  I had to replace my hard drive and I only have a disk of windows XP Prof. Update  My installation aborts because she wants is a full version.  What should I do

  You will need to borrow an installation disc to a former operating system Microsoft - Windows 95, 98 or me. There is no way around it. If person don't you know is an older drive, you can borrow for a few minutes, you will need, you will need to either buy a copy full XP or take the unit to a local computer professional to do the XP installation for you. MS - MVP - Elephant Boy computers - don't panic!

• The same updates keep installation again and again.

  Every time that the computer shuts down, the same updates keep installation again and again.  They also create a new folder on drive C named as numbers only with the 2 files in each directory.  These are difficult to remove.  Previous updates of the same number succeeded.  It is a bit of a pain!

  Hi Papabear1001,

  See the article after some troubleshooting for your question:

  http://support.Microsoft.com/kb/910339

  I hope this helps!

• Update Windows Installer is dead & now: 0x0000007B blue screen (0x80399BB0 0 x 0000034 0x00000000 0x00000000) AND a fix will prevent the system from starting.

  I was installing updates of windows and the computer is dead in the middle of it.  When I turned it back on it brought me to a blue screen with error codes: 0x0000007B (0x80399BB0 0 x 0000034 0x00000000 0x00000000).  It prompted me to do a system restore or to get to the system recovery, however it shows that there is no available restore points (even though I know that there are a bunch of them... because I checked this before I tried to make the updates of windows).  I went into the system recovery & the scan of my system with a scan of the additional memory, and there is nothing wrong with my real hardware.  The error recovery of the system that was given to me after the scan of my system is "a fix prevents the system to start.".  I looked at different positions in line with methods to get around this, but none of them does not seem to work.  Vssadmin does not appear on my system to try to use it again.

  I also tried cela http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/8b3e2550-c174-486f-b5dc-98260abc05f9, but as I mentioned before all my restore points have disappeared and when I try not to make method 4 there is no pending.xml file and these registry entries do not exist: HLKM\Offline Components\AdvancedInstallersNeedResolving, HKLM\Offline Components\PendingXmlIdentifier.

  I'm almost done try all this and ready to make a fresh Windows... Install but I hate to really do this knowing that everything was working fine before all this & my hardware is fine... If I could just figure out how to get rid of this darn update all this hangs then all would be well.  Anyone have any suggestions?

  Thanks in advance,

  Phatty

  Hello

  When a computer dies in the middle of an update, it often corrupts many system files leaving no other choice than to reinstall. This is why it is always recommended that laptops/notebooks be connected when you install updates. If Windows was trying to replace a critical system file when the power is off, there are very little that you can do to fix it. If possible, start with a system for the Recovery Console disk and try running "sfc/scannow" to correct or replacement of the damaged system files, but does not satisfy, you are faced with a relocation.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Updates Windows installs - Error 8000FFFF

  Whenever I try to install an update through Windows Update, I get the same error: 0x8000FFFF. I tried the solution given here, but these registry values do not exist in my registry so the problem is something else. I was not able to install an important update in a very long time (some updates requiring installation go all the way back for 2009!). Because of this window will let me install Internet Explorer 9 and Security Essentials. Updates only that it allows me to install Silverlight and Microsoft Office updates are, are not as important as the updates of security and whatnot. Any help?

  Windows Vista Edition Home Premium 32 bit SP2

  Time to try it here:

  http://supportservices.Microsoft.com/support/services/windows_update>

  If you find the answer to your problem, please let us know! I hope someone else can benefit from your solution.

  09:52:2107/13/11

• VMware 5.5.1 installation hangs at the end in XP Pro Sp3

  Then the installation hangs and won't be finished install but progress bar is just at the end have waited over an hour for her to finish - by using the administrator account.

  A folder for it but I don't see in the start menu.

  You know not so completely installed or missing components.  Nothing in Add/Remove programs related to it, so I think not completely installed.

  How to install XP or is there another version number which can do a physical examination to the conversion of the virtual machine of multiple partitions (drive by keeping letters) to a conversion of an existing for a guest of computer virtual of XP Sp3 XP run on Windows host 8.1 - hyper-v or vmware player prob / virtual box?

  Thank you very much.

  Also these: cmd prompt: netsh int ip reset resetlog.txt
  then netsh winsock reset catalog.
  Then reinstalled the NIC drivers as suggested.
  Also put the installer program office (extract the Installer file) and which ran on reboot.
  FIXED - after that restart could install all services installed in the end and shortened came office - running he opened the program.