Omega TCP IP 66 error
Good Friday afternoon!
I used the web interface for my OMEGA with Option Ethernet iNFB counter successfully. Now, I'm rehearsing the communication in Labview. The program appears to write the data very well but then does not receive a response back, or at least Windows is not patient enough to wait one because I get error 66 to try to read. I added a while loop to re-establish the connection when an error trying to read is reported. I still get no response from the unit. The format of the command is:
* - selected character recognition (any character from ASCII table)
X - read measurement data in decimal format
01. address of the first sensor (actually only)
When this command via the interface 'internet', the device reacts with (for example): X0100076.0. Fixed probe is a probe of RTD and playback of content in the response is correct: 76.0. The attached program your dissection. Thanks for your ideas... Solution: The attached above code works fine (less the while loop) when the i-server is properly configured to accept connections. Apparently, when you use the Web interface, this parameter is ignored and regardless of access. To configure the iserver for access set the "number of connections" greater than 0, most often 1 should suffice. Once it's done VI standard TCP/IP communication as fasteners at the top works like a charm. I hope I can save someone else some time... Tags: NI Software TCP of WCF error 10060. Hello.. I have test hosting of WCF of Hyper-v... Virtual MACHINE operating system is Windows Server 2008 R2 and add Vritual internal network Switch the value of ip 192.168... and iis assign host wcf net.tcp and port sharing is running net.tcp listener adapter firewall inbound rules is ok where it is good to test local vm... but client host to connect vm wcf call... no answer and the tcp error 10060 error code... Accommodation http is good, client host to connect Server vm Net hosting. TCP is error... Please answer my question. Hello Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums. http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer See you soon. Hi all I got an error 63 when running in my case. Basically, I build this case LabVIEW as a station master to speak the prorocol Modbus slave device and now read the registry of her value. The thing is that my computer can talk to the slave, I used the other monitoring software to detect as you can see in 'the slave data '. But in labview, I do not see data slave because of this error. I don't know if it's because of something wrong with the code itself. I hope all of you who are familiar with the implementation of Modbus labview could help me or! Thank you! Jinrong Error 63 is usually thrown when there is no "listen" for a connection. You have a standby server on a TCP connection to the IP address you provided? order TCP/IP ping error and windows command processor errors pop up on my screen. I met errors popping up on my screen. 1 tcp/ip ping command error 2 windows shell any ideas? Hi noahn, Method 1 It is possible that some third-party programs installed on the computer is causing the problem. I suggest that you configure the computer in a clean boot state and check if it helps. To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. See section to learn more about how to clean boot. How to configure Windows XP to start in a "clean boot" State http://support.Microsoft.com/kb/310353 Reset the computer to start as usual When you are finished troubleshooting, follow these steps to reset the computer to start as usual: Method 2 I also suggest that you run a virus on the computer scan and check if it helps. http://www.Microsoft.com/security/scanner/en-us/default.aspx You can also use Microsoft Security databases to scan your computer "TCP server inactive" error in LabView 7.0 My TCP in LabView 7.0 feature has disappeared. In the lower right corner of LabView on splash, he says "TCP server inactive". How can I fix it? Thank you Hi _Matt_, "Checkbox under Tools TCP" Options "VI Server: Configuration could have been unchecked. Make sure this is checked and see if that makes a difference. Thanks for choosing National instruments. Aaron Peña National Instruments Technical sales engineer Blue Screen of Death After adjusting TCP/IPv4-adapter error "STOP: 0x0000007E" Original title: Blue Screen of Death After adjusting TCP/IPv4-adapter Hi all
"Error loading of TCP MIB library" error when I add a standard TCP/IP printer port in Windows 7 My States of research... This behavior can occur if a version of third-party of the Wsnmp32.dll, Tcpmib.dll, Mgmtapi.dll, Ntprint.dll, or Snmpapi.dll file has been copied to the folder. States to fix... To resolve this problem, rename or delete these files in the folder. These files are taking precedence over the file provided by Microsoft in the \System32 folder. Is this correct? If Yes, how can I do to find these files and that do remove for Windows 7? Hello Wsnmp32.dll Ntprint.dll, Tcpmib.dll Mgmtapi.dll Good method to reset the tcp connection after timeout error I have an application that I build that communicates with a Modbus TCP device. If a communication occurs error I wish I could reset it TCP communication. What I have is a control that raises an event when pushed. In this case, I have a sequence that closes first the tcp connection and then opens a new connection. My application starts and works very well. To test the reset function, I removed the ethernet cable from the camera and waited until a timeout occurs. I plugged the cable reset back to and pushed my control. Sometimes the reset will take place, but most of the time I'll get a timeout in the TCP vi open error. After that, the only way I can establish communications must leave my application, disable and then enable the network device. Then, when I restart my application I have communication with my camera. Any help would be appreciated on how I should be reset my TCP connection. Thank you Terry Terry S of a. in writing: I've attached an example vi (LV10) that shows just the connection TCP and Reset. An error occurs when you try to run the open in the event of reset tcp protocol. As writing that your code should be fine. There is nothing inherently wrong with it. However, depending on the device, you communicate with you can try to restore the connection too quickly once you have closed the connection. The device allows multiple connections to it and may require some time to clean up the things on his end after you close a connection. An experimental basis try wait little time between TCP and the TCP Open shut it down. If possible you can try using Wireshark to see what is happening on the network. It may be useful to diagnose what is happening. Close TCP leaves the connection open Hello guys,. I use an ethernet connection to query the data of 2 units of acquisition of sensors. This request is motivated by a second timed loop period 30. As this rate is very low, I have the close connection and reopen it each time. I try to connect to the device via the same 2 ports each time, 50,000 and 50 001. I get the error message that the connection is already used for a close connection of TCP executed without error before. The network view TCP tool monitor gives me the screen following [network_connections.png] when I run w/o specifying the local port. It seems that the previous connection are not adequately closed and are always in the TIME_WAIT state. This list is continuouslly prices, leading to errors of networks. (For the units IP address is 200.0.4.152 and 153) Could you please help me on this? Thanks in advance Kind regards Bruno Hello This seems to be a common behavior: http://digital.NI.com/public.nsf/allkb/119D334B8B78732E862574E1006D1839 Hello I want to read a string of NMEA (1 Hz update rate) of a server. The original NMEA (series, 4800 baud rate) is converted by a MOXA to TCP. Here is my minimum program, I normally have a timer "wait until 1000ms" inside. The problem is that the MOXA closes its other port every minute. I can still read, but everyone else is blocked. Other Terminal programs work. The network guy told me that he sees a lot of traffic from my address and he thinks that, at some point, the MOXA is confused and shut its ports. Is there a possibility that read TCP sends a string of status or failure? azavarsky wrote: Hello I want to read a string of NMEA (1 Hz update rate) of a server. The original NMEA (series, 4800 baud rate) is converted by a MOXA to TCP. Here is my minimum program, I normally have a timer "wait until 1000ms" inside. The problem is that the MOXA closes its other port every minute. I can still read, but everyone else is blocked. Other Terminal programs work. The network guy told me that he sees a lot of traffic from my address and he thinks that, at some point, the MOXA is confused and shut its ports. Is there a possibility that read TCP sends a string of status or failure? How fast this device sends its strings? -What is simply spit data without any query command to be sent? If so your Moxa can be a problem too, because he doesn't know what to do with the data if there is no client connected to read. Also your Moxa converter can struggle to serve more than one client TCP on port even anyway. What should you do if several clients try to access the same port? Send the same message to everyone? Or send the incoming message randomly to one of them? Do you get your TCP read once errors Moxa "closes" the port as you say? If so you should terminate your loop on any error except maybe a timeout error and reopen the port in a second outer loop until your program wants out. Your loop never stopping on the errors will prevent the close TCP to run that will keep open socket and prevent the Moxa to see good handshake that the connection has been properly closed by the customer, which will probably prevent the Moxa device able to accept new connections. Network communication can be tricky and one of the first things you have to learn is the appropriate error handling. No matter what mistake anywhere in the network connection, usually error timeout on reading, with the exception should be managed by closing the connection and tries to reconnect. The search for a solution in detail FieldPoint error everything by deploying the projects(using_Fieldpoint_Hardware).it deploys successfully, but when I run my program host. giving a TCP/IP connection error You have it solved? Can update you? Unable to connect to remote vpn IPSec (Error 412) Hello Try to configure the IPSec vpn connection but error 412: the remote peer not responding. Router Cisco is directly connected to the internet using the dialer interface. So far, I tried the following: Disabled Windows Firewall IPSec over TCP ticket (received error 414) Permit to debug crypto ISAKMP and IPSEC (no illustrated newspaper) Newspapers enabled on the version of client VPN 5.0.01.0440 (Impossible to establish Phase 1 SA with server 'xxxxxxxxx' due to the 'DEL_REASON_PEER_NOT_RESPONDING') The router configuration: version 12.4 horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! ! boot-start-marker boot-end-marker ! ! AAA new-model ! ! AAA authentication login default local AAA authentication login usr_auth local AAA authorization grp_auth LAN ! AAA - the id of the joint session ! resources policy ! MMI-60 polling interval No mmi self-configuring No pvc mmi MMI snmp-timeout 180 IP subnet zero no ip source route IP cef ! ! No dhcp use connected vrf ip DHCP excluded-address IP 192.168.3.1 192.168.3.10 ! pool IP dhcp pool Classes network 192.168.3.0 255.255.255.0 default router 192.168.3.1 Server DNS XXXXXX xxxxxxxxxxx ! ! no ip bootp Server no ip domain search IP domain name xxxxxxxxx property intellectual ssh time 80 VPDN enable ! ! ! ! ! username 7 password xxxxxx xxxxx ! ! ! crypto ISAKMP policy 10 BA aes preshared authentication Group 5 ! ISAKMP crypto client configuration group client_cfg XXXXXXX key DNS xxxxxxx pool vpn_pool ACL 120 Max-users 2 Profile of isakmp crypto vpn-ike-profile-1 client_cfg group identity match client authentication list usr_auth ISAKMP authorization list grp_auth client configuration address respond virtual-model 2 ! ! Crypto ipsec transform-set encrypt-method-1 esp - aes esp-sha-hmac ! Crypto ipsec VPN-profile-1 profile the transform-set encrypt-method-1 value ! ! ! ! interface Loopback0 the IP 10.0.0.1 255.255.255.0 ! ATM0 interface no ip address No atm ilmi-keepalive DSL-automatic operation mode ! point-to-point interface ATM0.1 no link-status of snmp trap PVC 8/35 PPPoE-client dial-pool-number 1 ! ! interface FastEthernet0 no ip address automatic speed ! interface FastEthernet1 Shutdown ! interface FastEthernet2 switchport access vlan 2 ! interface FastEthernet3 switchport access vlan 3 ! interface FastEthernet4 switchport access vlan 4 half duplex ! tunnel type of interface virtual-Template2 IP unnumbered Loopback0 IP nat inside IP virtual-reassembly ipv4 ipsec tunnel mode Profile of tunnel ipsec VPN-profile-1 protection ! interface Vlan1 no ip address ! interface Vlan2 192.168.1.100 IP address 255.255.255.0 IP nat inside IP virtual-reassembly IP tcp adjust-mss 1452 ! interface Vlan3 address 192.168.3.1 IP 255.255.255.0 IP access-group 101 in IP nat inside IP virtual-reassembly IP tcp adjust-mss 1452 ! interface Vlan4 192.168.4.1 IP address 255.255.255.0 IP nat inside IP virtual-reassembly IP tcp adjust-mss 1452 ! interface Dialer1 the negotiated IP address IP mtu 1492 NAT outside IP IP virtual-reassembly encapsulation ppp Dialer pool 1 Dialer-Group 1 PPP authentication pap callin PPP pap sent-name of user password xxxxxx xxxxxxx 7 ! local pool 10.0.0.10 IP vpn_pool 10.0.0.20 IP classless IP route 0.0.0.0 0.0.0.0 Dialer1 ! no ip address of the http server no ip http secure server
the IP nat inside source 1 list overload of the Dialer1 interface IP nat inside source static tcp 192.168.1.1 25 25 Dialer1 interface IP nat inside source static tcp 192.168.1.1 80 80 Dialer1 interface IP nat inside source static udp 192.168.1.1 53 53 Dialer1 interface IP nat inside source static tcp 192.168.1.1 53 53 Dialer1 interface IP nat inside source static tcp 192.168.1.1 interface 1000 Dialer1 1000 IP nat inside source static tcp 192.168.1.1 interface 443 443 Dialer1
IP nat inside source static tcp 192.168.1.1 interface Dialer1 143 143 ! WAN-IN extended IP access list refuse the ip 0.0.0.0 0.255.255.255 everything deny ip 10.0.0.0 0.255.255.255 everything deny ip 100.64.0.0 0.63.255.255 all deny ip 127.0.0.0 0.255.255.255 everything deny ip 169.254.0.0 0.0.255.255 everything deny ip 172.16.0.0 0.15.255.255 all deny ip 192.0.0.0 0.0.0.255 any deny ip 192.0.2.0 0.0.0.255 any deny ip 192.168.0.0 0.0.255.255 everything deny ip 198.18.0.0 0.1.255.255 all deny ip 198.51.100.0 0.0.0.255 any deny ip 203.0.113.0 0.0.0.255 any refuse the 224.0.0.0 ip 31.255.255.255 all allow an ip ! access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.3.0 0.0.0.255 access-list 1 permit 192.168.4.0 0.0.0.255 access-list 101 deny ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255 access list 101 ip allow a whole access ip-list 120 allow a whole ! control plan ! ! Line con 0 exec-timeout 5 0 line to 0 exec-timeout 5 0 password 7 xxxxxxxxxxxx line vty 0 4 exec-timeout 5 0 password 7 xxxxxxxxxxxx preferred transport ssh entry ssh transport line vty 5 15 exec-timeout 5 0 password 7 xxxxxxxxxxxx preferred transport ssh entry ssh transport ! end I don't get any password prompt, so I guess there is a misconfiguration. Would appreciate if you can help with this. Thank you The 10.0.0.x pool is configured properly. Just change the NAT to traffic between 192.168.1.x, 3.x, and 4.x are exempt in NAT, where the above change config. Your split tunnel ACL says allow an entire ip, so please change it to the following: access-list 120 allow ip 192.168.1.0 0.0.0.255 10.0.0.0 0.0.0.255 access-list 120 allow ip 192.168.3.0 0.0.0.255 10.0.0.0 0.0.0.255 access-list 120 allow ip 192.168.4.0 0.0.0.255 10.0.0.0 0.0.0.255 I'm doing a Flash game with a simple socket server, and I have this package imported into the Flash document: package { import flash.display.Sprite; import flash.events.Event; import flash.events.IOErrorEvent; to import flash.events.ProgressEvent; import flash.events.ServerSocketConnectEvent; import flash.net.ServerSocket; import flash.net.Socket; TCP/public class extends Sprite { private var serverSocket:ServerSocket; private var clientSockets:Array = new Array(); public void TCP() { Try { Create the server socket serverSocket = new ServerSocket(); Add the event listener serverSocket.addEventListener (Event.CONNECT, connectHandler); serverSocket.addEventListener (Event.CLOSE, onClose); Bind to local port 8087 serverSocket.bind (8087, '127.0.0.1'); Listening to connections serverSocket.listen (); trace ("listen on" + serverSocket.localPort); } catch(e:SecurityError) { trace (e); } } public void connectHandler(event:ServerSocketConnectEvent):void { Thesocket is provided by the event object var: Socket = event.socket socket; clientSockets.push (taking); socket.addEventListener (ProgressEvent.SOCKET_DATA, socketDataHandler); socket.addEventListener (Event.CLOSE, onClientClose); socket.addEventListener (IOErrorEvent.IO_ERROR, onIOError); Send a connect message socket.writeUTFBytes ("Connected."); Socket.Flush (); trace ('connect send message'); } public void socketDataHandler(event:ProgressEvent):void { var socket: Socket = event.target as Socket Read the message of taking var message: String = socket.readUTFBytes (socket.bytesAvailable); trace ("Received:"+ message "); The echo of the message to the sender message = "Echo-" + message; socket.writeUTFBytes (message); Socket.Flush (); trace ("sent:"+ message "); } private function onClientClose (event: Event): void { trace ("Connection to client closed."); Should also delete table clientSockets... } private void onIOError (errorEvent:IOErrorEvent): void { trace ("IOError:"+ errorEvent.text "); } private void onClose (event: Event): void { trace ("socket closed by operating system server."); } }} However, when I try to run the SWF file, I get this: 1067: constraint implied a value of class type to a function unrelated. It is what is in the FLA: import of TCP; addEventListener (Event.ENTER_FRAME, TCP); The error appears on the addEventListener method. I have the settings of publication in the FLA AIR 2.6 the value. Why? Because when I updated Flash Player 10.2, I get this error: 1046: type was not found or is not a compilation constant: ServerSocketConnectEvent. The ServerSocketConnectEvent is in the package "TCP". I changed the publication parameters in the AIR because after doing a quick search on Google, ServerSocketConnectEvent is apparently strictly for AIR. So this means that the parameters of publication of switching in the AIR was the correct thing to do... right? Unless I get something horribly wrong here... But basically, when it is set to Flash Player, it imports the package and TCP eventlistener very well, but it screws upward to the ServerSocketConnectEvent. So when I'm on the AIR, I get this error 1067 bizarre to the addEventListener method... Is there something wrong with the package? I got it directly to the output of an example Adobe had, I could not imagine something being badly coded... y at - it something escapes me? Any help would be greatly appreciated, thank you. This isn't the way that you typically instantiate an instance of the class. more often, you use the new constructor: ex: example of var = new example(); If ex was a display object, you would usually add it to the display using addChild (ex); 0x0000000A (0x00000002, 0x00000001, 0 x 00000034, 0X81BA4E79) I hope someone could help me understand this... I just left a few minutes just for a coffee when I came back, my screen like that... I try to look in the computer management it says in windows under the application inside the event journal side by side source description 33 ID and it says also in windows under system log is the name of the Journal: System Source: Tcpip Date: event ID: 4226 task category: no level: warning keywords: PC Description: TCP/IP has reached the security limit imposed on the number of simultaneous TCP connect attempts... now why they produce to my laptop what can I do to avoid this msg. Once again I think you have two problems: Try the "last known good configuration". Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL Using the last good known Configuration Do you have Service Pack 2? If you do not, upgrade to SP2 See this: TCP/IP has reached the security limit imposed on the number of TCP simultaneous connect attempts on Windows Vista error By default, the half-open TCP connections limit is disabled in Windows Server 2008 with Service Pack 2 (SP2) and in Windows Vista with Service Pack 2 (SP2). How to enable the half-open TCP connections limit in Windows Vista with Service Pack 2 and Windows Server 2008 with Service Pack 2 5.5 ESXi update 2 | Hosts disconnect and reconnect to randomly We have 3 HP DL380 x G9 5.5 u2 running ESXi servers. They have been in production for about 6-8 months until now without any problem whatsoever, until recently. Recently, Vcentre guests will enter a 'disconnected' State and the alarm 'host and connectivity power '. After a few minutes, the host will reconnect and everything continues as usual. This disconnection causes no VMs sign out or restart. During the period where Vcentre shows as disconnected host, we can still SSH and ping on the ESX host without problem. I checked through the VPXD logs and found that, at the time of the failure, in this case: It doesn't seem to be a single host that is affected, it could be anything. It does not appear to occur at the same time during the day. I have checked for problems known and found some handshake SSL timeout KB articles, but do not believe that the same thing is happening here. I tried increasing the time-out period by that article anyway (KB 2064246) but that does not make a difference. All devices are connected to one HP5406ZL2 pass, with management on a vswitch with 2 x 10 GbE interfaces Active / active with route based on the origin of virtual Port ID set. The server running vCentre is also the MRS server and our server backup exec. Any information anyone can provide would be greatly appreciated. This weekend a just disappeared from the servers disconnected completely and don't come not back online. To fix that we followed the info in this article: This has now been run on all hosts and disconnects the random disappeared. I will seek to apply the updates that are mentioned in this article as soon as POSSIBLE. Cordially for someone else who stumbles across this. Add after the purchase - 24GB flash acceleration Cache disk hard + bluetooth I can't wait but a smart buy HP ENvy 17 t-j100 however it does NOT hace two options, that I really want. 24GB flash acceleration Cache hard drive802.11 WLAN AC and Bluetooth® [1 x 1] I have a heavy discount coupon for the smart buy so I can't set up How to change a parent who manages a child's account? How can I change the parent managing the child's account? Previous title - settings Hotmail Parent after repair XP post hardrive ghosts at all new post Oobe activation start error So my pc crashed I ghost my hardrive to nine a ran windows repair, windows activation error had around it and now I can't open the windows activation section, even if I go to the file in windows32 folder and click? IV changed the registry value and w Frustrated with connection to the browser blackBerry smartphones When I try to browse the Internet, I've recently started having a popup box that says: "this is a problem when trying to render the page. I was not able to connect to the Internet for about 4-5 days. Can anyone help? How can I check the serial number from Adobe if it is correct? Hello adobe community,I recently bought CS3 master collection (second hand) and must check Adobe if the serial number is correct.can anyone tell me where exactly, I can do. Aware of correct e-mail address or phone number for Adobe?Greetings AlinaSimilar Questions
The System Configuration utility dialog box appears.
Snmpapi.dll
error:
using two screws
1 acquisition of data vi. It acquires data using FP Read.VI
2 program.
It is using the TCP/IP protocol to connect, but gives an error.
(Error 63 appeared to TCP connection open in TCP _IP_host.vi-> Main_Host.vi
Reason (s) possible
LabVIEW: Serial Port receive buffer overflow.
LabVIEW: The network connection was refused by the server. For TCP/IP, make sure that the server is running and listening on the port you want to use. Firewalls can also cause a server to refuse a connection. For VI Server, make sure that you have enabled the server from VI tools > Options > VI: Server Configuration.)
http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560129 (v = vs. 85) .aspx
http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration
http://www.mydigitallife.info/Tcpip-has-reached-the-security-limit-imposed-on-the-number-of-concurrent-TCP-connect-attempts-error-on-Windows-Vista/
http://support.Microsoft.com/kb/969710
2015-08-22T01:45:52.952+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:45:52.952+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:45:52.952+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.172, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:46:52.953+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:46:52.953+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:46:52.953+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.172, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:47:05.413+08:00 [09892 info 'commonvpxLro' opID=E83DF74C-00001BE1-18] [VpxLRO] -- BEGIN task-internal-35516 -- -- vmodl.query.PropertyCollector.cancelWaitForUpdates -- 4cb606ef-f3da-9ace-e253-d4c9e9b48bfe(529b4a61-85a4-90fe-ce8c-6361ed144841)
2015-08-22T01:47:05.414+08:00 [09028 error 'SoapAdapter.HTTPService'] Failed to read request; stream: <io_obj p:0x000000000cc5fd08, h:4656, <TCP '[::1]:8085'>, <TCP '[::1]:56470'>>, error: class Vmacore::SystemException(An established connection was aborted by the software in your host machine)
2015-08-22T01:47:05.414+08:00 [09892 info 'commonvpxLro' opID=E83DF74C-00001BE1-18] [VpxLRO] -- FINISH task-internal-35516 -- -- vmodl.query.PropertyCollector.cancelWaitForUpdates --
2015-08-22T01:47:52.954+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.172, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:47:52.954+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:47:52.954+08:00 [09988 info 'vpxdvpxdVmomi' opID=SWI-1021c707] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.fetchQuickStats)
2015-08-22T01:48:07.047+08:00 [09916 info 'commonvpxLro' opID=24b2ad7b] [VpxLRO] -- BEGIN task-internal-35517 -- -- vim.LicenseAssignmentManager.queryAssignedLicenses -- ffe39310-e804-b7d6-92d8-61203ec022ce(52008866-be52-bc37-8007-48ec7a383c04)
2015-08-22T01:48:07.047+08:00 [09916 info 'commonvpxLro' opID=24b2ad7b] [VpxLRO] -- FINISH task-internal-35517 -- -- vim.LicenseAssignmentManager.queryAssignedLicenses --
2015-08-22T01:48:25.450+08:00 [16416 error 'vpxdvpxdVmomi'] [VpxdClientAdapter] Got vmacore exception: Operation timed out
2015-08-22T01:48:25.450+08:00 [16416 error 'vpxdvpxdVmomi'] [VpxdClientAdapter] Backtrace:
--> backtrace[00] rip 000000018018b7fa
--> backtrace[01] rip 0000000180104c78
--> backtrace[02] rip 0000000180105f6e
--> backtrace[03] rip 000000018008ff08
--> backtrace[04] rip 00000001800418d6
--> backtrace[05] rip 00000001800445de
--> backtrace[06] rip 0000000180048382
--> backtrace[07] rip 00000000004f0ca9
--> backtrace[08] rip 00000000004f1399
--> backtrace[09] rip 00007ff7689280df
--> backtrace[10] rip 00007ff76892f418
--> backtrace[11] rip 00007ff768931b9a
--> backtrace[12] rip 00007ff768928257
--> backtrace[13] rip 00007ff768930d89
--> backtrace[14] rip 000000000046157e
--> backtrace[15] rip 000000000055a15a
--> backtrace[16] rip 00007ff7682b379d
--> backtrace[17] rip 00007ff7682b4406
--> backtrace[18] rip 0000000180152544
--> backtrace[19] rip 00000001801525d1
--> backtrace[20] rip 0000000180156eec
--> backtrace[21] rip 00000001801587ba
--> backtrace[22] rip 0000000180158cfc
--> backtrace[23] rip 0000000180158e98
--> backtrace[24] rip 0000000180153ab3
--> backtrace[25] rip 0000000180154b03
--> backtrace[26] rip 0000000180154e43
--> backtrace[27] rip 000000018019d62a
--> backtrace[28] rip 0000000067642fdf
--> backtrace[29] rip 0000000067643080
--> backtrace[30] rip 00007ffdbd7e13d2
--> backtrace[31] rip 00007ffdbfab5444
-->
2015-08-22T01:48:25.454+08:00 [21316 info 'vpxdvpxdVmomi' opID=HB-host-42@141303-7d8115aa] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vmodl.query.PropertyCollector.Filter.destroy)
2015-08-22T01:48:25.454+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] [VpxdHostSync] GetChanges host:192.168.101.171 (192.168.101.171) [GetChangesTime] took 1800035 ms
2015-08-22T01:48:25.454+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] [VpxdHostSync] DoHostSync:0000000009D0F6C0 [DoHostSyncTime] took 1800035 ms
2015-08-22T01:48:25.454+08:00 [21316 warning 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141303-7d8115aa] [VpxdInvtHostSyncHostLRO] DoHostSync failed for host host-42
2015-08-22T01:48:25.454+08:00 [21316 warning 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141303-7d8115aa] [VpxdInvtHostSyncHostLRO] Host sync failed to host-42
2015-08-22T01:48:25.454+08:00 [21316 error 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141303-7d8115aa] [VpxdInvtHostSyncHostLRO] FixNotRespondingHost failed for host host-42, marking host as notResponding
2015-08-22T01:48:25.501+08:00 [21316 warning 'vpxdvpxdMoHost' opID=HB-host-42@141303-7d8115aa] [HostMo] host connection state changed to [NO_RESPONSE] for host-42
2015-08-22T01:48:25.524+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] InvtHostSyncLRO::StartWork [HostSyncTime] took 1800105 ms
2015-08-22T01:48:25.524+08:00 [21316 warning 'VpxProfiler' opID=HB-host-42@141303-7d8115aa] VpxLro::LroMain [TotalTime] took 1800105 ms
2015-08-22T01:48:25.524+08:00 [21316 info 'commonvpxLro' opID=HB-host-42@141303-7d8115aa] [VpxLRO] -- FINISH task-internal-35432 -- host-42 -- VpxdInvtHostSyncHostLRO.Synchronize --
2015-08-22T01:48:25.869+08:00 [09292 info 'vpxdvpxdHostUpgrader' opID=SWI-10381aa1] [VpxdHostUpgrader] Preinstalled bundle found: not installing
2015-08-22T01:48:25.869+08:00 [09292 info 'vpxdvpxdInvtHostCnx' opID=SWI-10381aa1] [VpxdIntHost] Missed 180 heartbeats for host 192.168.101.171
2015-08-22T01:48:25.869+08:00 [09832 info 'commonvpxLro' opID=HB-host-42@141316-52709f38] [VpxLRO] -- BEGIN task-internal-35518 -- host-42 -- VpxdInvtHostSyncHostLRO.Synchronize --
2015-08-22T01:48:25.870+08:00 [09832 info 'vpxdvpxdInvtHostCnx' opID=HB-host-42@141316-52709f38] [VpxdHostSync] Synchronizing host: host-42 (192.168.101.171, 192.168.101.171)
2015-08-22T01:48:25.899+08:00 [09832 info 'vpxdvpxdVmomi' opID=HB-host-42@141316-52709f38] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vpxapi.VpxaService.retrieveChanges)
2015-08-22T01:48:25.901+08:00 [09832 info 'vpxdvpxdVmomi' opID=HB-host-42@141316-52709f38] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vmodl.query.PropertyCollector.createFilter)
2015-08-22T01:48:25.902+08:00 [10564 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.171, vmodl.query.PropertyCollector.waitForUpdates)
2015-08-22T01:48:26.402+08:00 [09876 info 'commonvpxLro' opID=task-internal-35519-3cef20c4] [VpxLRO] -- BEGIN task-internal-35519 -- -- ScheduledTaskLRO --
2015-08-22T01:48:26.433+08:00 [17708 info 'commonvpxLro' opID=task-internal-35520-36662076] [VpxLRO] -- BEGIN task-internal-35520 -- -- ScheduledTaskLRO --
2015-08-22T01:48:26.436+08:00 [17708 info 'commonvpxLro' opID=task-internal-35520-36662076] [VpxLRO] -- FINISH task-internal-35520 -- -- ScheduledTaskLRO --
2015-08-22T01:48:31.420+08:00 [09876 info 'commonvpxLro' opID=task-internal-35519-3cef20c4] [VpxLRO] -- FINISH task-internal-35519 -- -- ScheduledTaskLRO --
2015-08-22T01:48:32.009+08:00 [10092 info 'commonvpxLro' opID=HB-host-47@184250-7ea813a6] [VpxLRO] -- BEGIN task-internal-35521 -- host-47 -- VpxdInvtHostSyncHostLRO.Synchronize --
2015-08-22T01:48:32.010+08:00 [10092 info 'vpxdvpxdInvtHostCnx' opID=HB-host-47@184250-7ea813a6] [VpxdHostSync] Synchronizing host: host-47 (192.168.101.173, 192.168.101.173)
2015-08-22T01:48:32.014+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vpxapi.VpxaService.retrieveChanges)
2015-08-22T01:48:32.016+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.createFilter)
2015-08-22T01:48:32.040+08:00 [19544 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.waitForUpdates)
2015-08-22T01:48:32.077+08:00 [19544 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.waitForUpdates)
2015-08-22T01:48:32.080+08:00 [19544 info 'vpxdvpxdVmomi'] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.waitForUpdates)
2015-08-22T01:48:32.083+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.Filter.destroy)
2015-08-22T01:48:32.085+08:00 [10092 info 'vpxdvpxdVmomi' opID=HB-host-47@184250-7ea813a6] [ClientAdapterBase::InvokeOnSoap] Invoke done (192.168.101.173, vmodl.query.PropertyCollector.cancelWaitForUpdates)
2015-08-22T01:48:32.085+08:00 [10092 info 'vpxdvpxdInvtHostCnx' opID=HB-host-47@184250-7ea813a6] [VpxdHostSync] Retrieved host update to 184250 for host-47
2015-08-22T01:48:32.086+08:00 [10092 info 'vpxdvpxdInvtHostDb' opID=HB-host-47@184250-7ea813a6] [VpxdInvtHost::SaveFieldsToDb] IPMI info of host 192.168.101.173 is not set
2015-08-22T01:48:32.091+08:00 [10092 info 'vpxdvpxdInvtHostCnx' opID=HB-host-47@184250-7ea813a6] [VpxdHostSync] Completed host synchronization for host-47
Maybe you are looking for