Omni 10 bad Bios Fix?

Similar Questions

• Pavilion 17 f010sv i3 4030u: offer for f010sv support assistant bad BIOS Hp pavilion computer laptop 17

  I am the owner of the laptop above. After formatting with windows 8.1 and installation wizard Hp support me support upgrade wizard councils report to bios version f42revA! ???. After the upgrade, I realize that the system got too long to stop and then I started to find what goes wrong. Finally, I believe that the bios is bad version and I want to restore using a USB and a HP PC Hardware Diagnostics UEFI partition using the firmware option. After several attempts to downgrade again to f07 version that works perfectly I am not able to do so and I get the message >!?. I tried also several other versions of decommissioning, but always got the same message. Please me advice what to do because the system does not normally behave since the bios upgrade to version f42a. Also please fix this dangerous bug for bios update to the incorrect version on the support assistant hp software.

  Best regards

  Dimitris Siaflas.

  After several attempts I managed to return to the f33 version which seems stable. But please someone to repair

  the bad Council with assistance from assistant hp offering a bad bios CPU.

• Portege 2010 - bad BIOS (block3)

  I have a portege 2010 with a bad bios
  on normal startup, it goes to screen
  BIOS (Block3) is damaged! (Call the repairman).

  so I tried to reflash the bios in the usual way.
  do a disk with
  -----
  biosfile biofca6t.com
  chgbiosa.exe
  -----
  and start either with the flashing the BIOS button (just to the left of the space bar)
  or by pressing any key on-screen "block3.

  It does not load the program chgbiosa.exe. who reads the bios file
  Hot flashes and it recharges
  -----
  Reading BIOS file...
  Data erasure and writing the BIOS...

  ROM write successful!
  Utility finished
  -----
  Then it restarts

  but unfortunately. nothing changes. He still goes to the display of block 3

  so I think I can have damaged the chip of the bios on my hands.
  Since the successful re-flash does nothing...

  -----------------
  NOT RECOMMENDED
  So I decided to check if the chgbiosa actually do anything.
  so, during the writing process, I unplugged the power.
  (incomplete writing process) and I'm done with a (block 1)
  damaged. An another bios update later.
  and we are back to (Block3)
  so it does not write in the bios
  DO NOT TRY THIS: can erase the part "failsafe" of the bios
  ---------------------
  so the question is. Where should I go from here.

  I'm willing and able to unsolder the chip and flash also
  but I don't have a bios not 'complete' user flashable part only of it since the official updates of the file...

  can I order a new chip preflashed somewhere?

  can I somehow totally clear the bios user box then it reflashing?

  can - I somehow replace the bios (more than the standard chgbiosa way?)

  can I transplanted the and of a motherboard Portege 2000
  (the failsafe will start so I can flash with a bios P2010?)

  I can start another tool, describing it as "chgbiosa.exe" on the floppy drive, which can be useful

  can I do the smaller biosfile, so it won't need block3 (remove the logo toshiba etc.)
  from the rom file?

  Any suggestions are appreciated

  This notebook is a project of the company. I am prepared to do anything...

  / Jean-Paul

  Hello

  So many questions, and most of them must be answered by technicians. I really think you need professional help. I recommend you to call the nearest Toshiba service provider and ask for help.
  To be honest, I don't think that you will be able to order this chip anywhere. Speak with the service.

  By the way: mainboard renovated for Portege 2000/2010 with work well chip BIOS, I found on eBay for 39 euros, so if you can not do anything and BIOS repair buy new motherboard, Exchange and be happy.

  Furthermore, I Portege 2000 and it's really nice laptop.

• Satellite A60-202 after bad BIOS updated the PC does not work

  Hello

  After a very bad my BIOS update, my PC doesn't work and doesn't turn on.
  What to do now?
  It is Toshiba Satellite A60-202 with 512 MB of memory and 40 GB of HD.
  model PSA60E-OLP06TFR SA60-202

  Thank you

  Yves

  HI Yves,

  Unfortunately, if the BIOS update procedure does not work (or fill), then it is likely that the BIOS in the CMOS chip had been corrupt and without it, you will not be able to boot your laptop to fix the problem.

  It will be necessary to bring (or send) your laptop to a repairer authorized to have reflashed BIOS.

  Kind regards

• Satellite U400 PSU44e - bad BIOS flash

  Hi all

  I had a big problem.
  Yesterday I was bios new flash 5.0 for my Toshiba u400, but he still on about 70% of 2 hours.
  I turn out of it.

  Then after plugging I see onlu black screen and nothing happends, I had something bios bad flash.

  I try with phoenix crisis recovery and a usb drive.
  I try with the toshiba via bootable CD bios update.
  I try to make the bootable CD with files BIOS.wph (and I change autorun.bat).

  I try this with the keys: fn + B, win + B and Fn + Esc (it's power led flashes after startup).

  What you suggest me?

  Service is the last option that I accepted.

  Concerning
  Alan

  Hello

  You should get in touch with Toshiba ASP in your country.

  Maybe the crisis disk BIOS could contribute to reflash the ROM module otherwise it could be possible that module ROM is damaged and motherboard needs to be replaced.

• Satellite 3000 - x 4: bad BIOS flashing of THE

  Hi there I called technical assistance on this topic and he completely waste and cannot even give the right numbers...

  Right my Sat 3000 - x 4 with incorrect Bios flashed and now have a laptop justshowing power dead - it lights but that on this subject. There is no screen and no evedece of life as we know it.

  Is there a fail safe module integrated into the system to let me create a boot disk, so I can reflash my system with the bios files correct or and I basically knackerd.

  What can I didsasemble the laptop and do a hotswap and reflash the system.

  any help would be apracted.

  of many thks mick

  Hello

  Looks like you used a bad version of BIOS update the BIOS on the device. Well, I put t know if you know but the wrong version or an incorrect BIOS update procedure may damage the motherboard. Also it is not possible to upgrade the BIOS for example 1.6 to 1.3 s.
  I recommend contacting the partner of service in your country, because only the ASP can install the BIOS again. Hope that the motherboard is not broken.

  Good bye

• Satellite L500 (PSLS9A-01U012) - bad BIOS HWsetup

  first the card, I have the toshiba satellite l500 core i3 @2. 13 ghz 4 GB ram 500 GB hard drive
  I bought this laptop in December and has recently had a problem that required me to reinstall windows 7. I went to a set of recovery discs, only to be told that he could not find the recovery partition. the recovery partition is still there that I can see via easeus data recovery pro. thing is try to make a backup of recovery it says cannot find the recovery partition and now the hwsetup shows the bios version as a bunch of symbols instead of the number. is there a way to fix this without ordering a set of discs from toshiba?

  screenshot of hwsetup window is http://imageshack.us/photo/my-images/135/biosversionscreenshot.png/

  Hey,.

  I put t think that the problem is related to your installation of Windows 7

  In your case, I'll try to reinstall HWsetup and added value package. These two tools can be downloaded from the official website of Toshiba:
  www.MyToshiba.com.au

  Check this box!

• Need help to recover a bad BIOS flash on Satellite L300D-01

  I need your help to fix my laptop because the BIOS is not included in the guarantee.

  What happened:

  I was downloading all the drivers from the site Web of Toshiba to make a CD-ROM of drivers, in case I need it.
  I clicked the update of the BIOS when I drag and drop into a new folder and the BIOS start without asking and freezz about 50% I wait 30 min because I know THAT BIOS is critical, but after all this time I have no choice then to power off the computer.

  Now when I turn on the computer, I have no disk image trying to read and she.

  Now what I want to do is a CRISIS of recovery since this is the only option I have for now.

  What I need, is that the BIOS file not the stupid .exe, but a ROM or .bin I think and instruction to do on this particular model.

  Thanks for looking for my post and I hope that someone can help me here because repair $80 for a budget laptop is great.

  I doubt that you might be able to repair this laptop for yourself.
  The fact is that the ROM module has been flashed properly and I guess it must be flashed again using a traditional BIOS version.
  This version of BIOS is NOT available on the Toshiba page. Only a victory according to BIOS version.

  Therefore, you will need to contact the ASP in your country for a BIOS flashing module.

  Mate sorry but I don't see another solution to the problem you.

  Welcome them

• PayPal has a certificate of bad mine fixed by disabling the kaspersky.then I turned it off turned safemoney and back on

  close safemoney fixed mine, first disable kaspersky, then if it works turn off safemoney.
  Good luck

  Is PayPal, the only site for which you get a wrong certificate error? Normally with the feature of SSL Scan Kaspersky, you get a lot of errors, or if Firefox is configured to work with it, you don't see any false errors, only those specific. Hmm...

• Satellite L50 - A - bad BIOS in the download section

  Hello
  I downloaded the update to the bios for my laptop, L50-A-165
  http://www.Toshiba.PT/laptops/satellite/satellite-l50-a/satellite-l50-a-165

  The update indicates that bios model doesn t match the downloaded rom is for model vg10st while I vg10s.

  Can anyone help?
  Thank you

  > The linux kernel agrees with flashing:

  Does that mean exactly?
  Try you update BIOS under Linux OS?

  You must use the preinstalled Windows system in order to update BIOS!
  The update of the BIOS is not possible using Linux!

• Satellite L850/0C9: Toshiba Service Station recommend bad BIOS update?

  I have a portable Satellite L850 - 0C9 and Toshiba Service Station recommended I install the new update of the BIOS that are marked "Satellite Pro update BIOS of C850 - v6.50.

  Should I install that is not the same model as my laptop
  If this is not the case, why gas station recommend that I install it?

  I guess it's your laptop and all the drivers and BIOS available for this model of laptop:
  http://www.MyToshiba.com.au/support/computers/satellite/l850/pskdla-0c900r/download

  The latest version of the BIOS is v6.50 and it seems to be the right one.
  C850 Pro seems belongs to the series even though maybe the BIOS is the same.

  However, the update of the BIOS is still a technique sensitive and from my point of view it is not really necessary if you n t s were a serious problems.

• I have a bad BIOS on L300 Satellite?

  I have a Satellite L300. I don't think I've changed (upgrade) of the BIOS.
  I had problems with Vista and get the wireless doesn't work on XP.

  When I checked changed BIOS and has tried to update, I discovered that update to the newest BIOS on Toshiba site is 1.40, whereas the BIOS I have installed is 1.50 and I am not allowed to install a BIOS with a lower version number.

  The BIOS seems messed up.
  Some items are grayed out and cannot be accessed or modified.

  Apart from the laptop to the Toshiba sending anyone has a suggestion on how to re - install the correct BIOS 1.40.

  Thank you very much

  Daka

  Hello

  The European Player Toshiba page provides drivers and different BIOS series of portable Satellite L300!
  For certain series BIOS 1.4 came out and for some series, you won't find the BIOS
  However, please could you put your laptop model number; Satellite L300-xxx and the number of Pxxxxxx?
  Thank you.

  By the way; usually the BIOS you cannot downgrade the BIOS version... as far as I know that ASP may downgrade the BIOS using another version of BIOS.

• Bad BIOS installed on the Satellite A200

  I had one laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty. I researched and downloaded many programs, but I don't have a USB floppy drive. I downloaded phlash16, created an autoexec.bat file and follow all directions I've read on different post of different Web sites.

  Can someone please help me to recover my BIOS using the virtual floppy drive to USB and can someone please give a process step by step on how to reflash the BIOS. My laptop is Toshiba Satellite A200. Please give me a BIOS for my laptop.

  Please email me [email protected]

  Any help will be much appreciated. Thank you.

  Hi mate

  > I had a laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty

  I'm afraid, you will need to contact the ASP in your country in order to solve this problem of m

  Toshiba driver page contains no traditional BIOS updates but only focus on the Win BIOS update, this means that you will not be able to update the BIOS by using a floppy disk because you don t have a traditional BIOS version

  Get in contact with the ASO technician, they can help you!

• Bad BIOS installed on Satellite P200D

  Hello

  I accidentally installed wrong BIOS version. Instead, for P200D, I installed for P300D and after installation, now I have laptop dead. Did someone have idea how bring him back alive, I read allot on the crisis recovery disk and I tried several times without success.

  Please give me some advice how to handle this situation hopeless.

  Sorry to hear that. It's really a big problem today.
  It is unclear to me that some discs of crisis can make your computer laptop for work again.

  The only thing you can try is to follow the advice or method posted on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=54395

  I hope you help.

• Equium L40: After bad Bios update cannot use the WLan

  Hi there hope someone can help.

  I've updated the Bios as tempo toshiba said, but I have not read the last piece. Who was that it is not for mine which is the model L40.

  I have now tried to put the right pair, but he says he can't. As I'm putting that has an earlier date.

  My main problem now is that my wireless stopped working, it says its there and so to work, I put the switch on, but he can't find any networks he used to find approximately 4 in my area

  Do I have to restore my entire system :(?

  I'm really confused about your message because the European Toshiba page provides drivers and BIOS for one Equium L40 series m.
  I found 2 different versions of the BIOS for Equium L40; a BIOS for XP and a BIOS for Vista.

  In my opinion it of almost not possible to update the BIOS with the wrong version

  However, it you have updated and used the wrong BIOS, then you must contact the ASP to help

  But first, I recommend a check of the WLan configuration