Omni 100-5050 HP all-in-one: hp hardware

Similar Questions

• Need instructions for installing ram in my hp omni 100-5155 all in a desktop pc

  I have a HP Omni 100-5155 while a desktop pc. I run Windows 7 64 bit.

  I wants to increase the ram in this unit, but can not find instructions on how to remove back then ram can be installed.

  I know how to do an upgrade in a regular pc configuration, but not this all-in-one.

  Any help will be greatly appreciated.

  Thanking you in advance

  Leila 1939

  Hello

  There is a good description (including a video preview) of this procedure on the following link.

  http://support.HP.com/us-en/document/c02654240

  Kind regards

  DP - K

• HP 120 omni power ALL IN ONE on passworde

  Obtained and hp 120 omni all-in-one who came in a palette to mix all THE computers in ONE OFFICE, IN

  This one in particular has a POWER ON PASSWORD

  I figured out how to circumvent some of these passwords by getting an error code.

  the problem is that it does not give an error code, but a character (*)

  any suggestions help?

  I already tried to remove the jumpers and they are put back in place without success.

  ANY HELP WILL BE REALLY APPRECIATED

  Hello

  Whether you are able to remove the power on password, you must remove the back cover, and then remove the metal cover that protects the motherboard and remove the jumper located near the memory modules.

  Then try to turn on the system and see if that solved your problem.

  Thank you

• All in one Hp Omni 27 white screen

  Hi all!

  I have an all in one Hp Omni 27-1001es and I have a very big problem!

  Yesterday, I was working on pc and had to leave for a few minutes.

  When I came back the screen was blank and the pc freezes; I tried to restart and nothing has changed!

  At the start of the key power led works, the fan starts working and the led on the drive hard too but the screen continues without signal of life. Unplugged, open the case and clean dust, checked the Ram and nothing seems to be burned or disconnected.

  Thanks for any help

  Leo

  Hello Leo3680,

  I understand your computer but does not show a display on the monitor, is it correct? I'll be happy to help you.

  If you have not already tried it to start with a hard reset.

  1. remove all cables from the computer including the power cord

  2. press and hold button power for 30 seconds

  3. Once done insert only the mouse, keyboard and power cable

  4. try turning on your computer to see what's happening.

  Please answer as soon as possible.

  Thank you

• HP Omni 200-5316d all-in-one: memory upgrade PC 10600 1333 mhz for PC 10600 1600 mhz for hp omni 200

  Recently I bought HP laptop, now time, I want to upgrade my all-in-one hp desktop omni 200-5316 d up to 8 GB of RAM.

  Currently RAM pc3-10600 1333 mhz 4 gb (2 X 2 GB) outside the EEC.

  Should I buy exactly the specification stated or can I switch to 1600 mhz pc3-10600 2 X 4 GB RAM not CEE.

  Thank you

  Hello:

  Installation memory PC3-1600 does not accelerate memory, being the fastest, it can be run to 1066 MHz.

  Even the 1333 MHz memory only runs at 1066 MHz, which is the highest speed of the processor.

  I can tell you that memory installation in any PC HP that has a series 5 including your Intel chipset (and uses the memory of the laptop) is very difficult to upgrade.

  I suggest that you read this post and one that I've referenced in this post to make sure that you get good memory or it won't work.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/re-HP-ProBook-6550b-notebook-PC-RAM-upgrade-issues/m-p/5586992#M336939

• ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm

  Difficulties that the printer will not accept 250 gsm paper past the printhead.

  Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.

  I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?

  Thanks in advance.

  Welcome to the @noxasforums.

  I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.

  Let me know what happens!

  • HP ENVY 100 (D410) and 110 (D411) e-all-in-One Printer Series - 'in paper' Error Message displayed the ENVY and the printer isn't looking upwards or the paper feed

  Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.

  

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• Printer all-in-one HP Envy 100

  I want to scan slides on this printer.  Can I do it?

  ENVY 100 all-in-one printer does not support the scanning of slides.

  There are several manufacturers that offer scans of slides or negatives. Here are the couple of scanners HP that support the digitization of slides:

  ScanJet G4050:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L1957A?HP-ScanJet-G4050-photo-scanner

  ScanJet G3110:

  http://www.shopping.HP.com/en_US/Home-Office/-/products/printers/HP-ScanJet-and-HP-fax/L2698A?HP-ScanJet-G3110-photo-scanner

• HP omni 200 all-in-one: hp omni 200 display brightness and contrast

  I'm trying to adjust my brightness of the screen to the bottom... I already tried the right buttons... All that I can do?  I need

  for the low average display brightness to match printable photo of my laboratory.  Also is it possible to change the contrast?

  I checked online a little and can't see any other information. on this...

  Thank you...

  other than this issue p.s., I was very happy with this system!

  Sharon

  I think that you are good to go now on what I believe that it will keep the setting that you created.

  I don't know if CCC has an option to save these settings. He can just leave them until you change it again.

  Shut down the computer then turn it back on again, then check the settings to make sure.

  Note that if you ever update the ATI driver or update the software of the CCC, you may lose these settings.

  I'd write them down to safety on a case where you need to refer to them.

  If you use a calibrator as a Spyder (for example), you want to leave the CCC at default settings first, calibrate with the screen reader, then adjust CCC after for tweaking final with the brightness and contrast.

  To those who don't have not one built in graphics port. If you decide to extend your display Omni with a 2nd monitor, you can use a graphic like this USB card adapter. If you do, an external monitor is better than the built-in screen year only elon on what you buy. Amazon.com: StarTech USB to VGA video output Also, if you have a 2nd monitor already setup and the built in screen dies (All in One are known for this) the 2nd monitor will generally continue to work and you can always access the computer easily. Cannot override the built-in screen.

  So, as you already know, do not rely on your photos being stored only on the hard drive of the Omni. Use external backups.

  If my advice was useful, please indicate the appropriate post as solved.

  Thank you.

• KODAK ALL IN ONE ESP OFFICE 2150 PRINT SCALE IS FIXED AT 26%, HOW TO MAKE IT 100%

  KODAK ALL IN ONE PRINTER ESP OFFICE 2150 PRINT SCALE IS LOCATED ON 26%... HOW CAN I CHANGE IT TO 100%

  Hi Clarence,.

  Please go to the Microsoft Community Forums.
  I understand from the description of the issue you want to change the print from 26% to 100% scale.
   
  Are you facing this problem of setting of scale impression on any particular program/document?
   

  Check out the link:

  Choose printing options

  http://Windows.Microsoft.com/en-in/Windows7/choosing-print-options
   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• HP Omni 120-1024 all-in-one - I think I'll have hard disk problems, I can replace "on my own"?

  Sorry if this sounds stupid, but with the all-in-one is so compact and mysterious, I'm not confident juggling it as I used to be when I got a tour.

  This week the computer starts to work slower than snails. as something and 10 minutes later, he answers with a click. I ran the tests for the virus, but they do not somewhere through; I noticed a ton of mistakes in the event vwr posing problems SATA. I tried to run the Diagnostics and it FROZE at the SMART test.

  I'm afraid it's the hard drive, I'm still trying to diagnose. I just want to know how it is difficult for the swap on a hard drive on one of these all-in-one.

  Thanks in advance.

  BTW, this computer is only 1 year and 4 months. Looks really 'young' to a hard drive failure, I had computers in the past which lasted for years and years.

  Hello

  Unfortunately indeed resembles diving is a failure and should be replaced.

  As examples, the following hard drives would be a good choice.

  500 GB 3.5 "HDD Sata II.

  750 GB 3.5 "HDD Sata II.

  1 TB 3.5 '' Sata II hard drive.

  Best regards

  DP - K

• Installation of ram in a hp omni 100-5155

  Sorry, I posted this question in the wrong category.

  I have a HP Omni 100-5155 while a desktop pc.  I run a Windows 7 64-bit operating system.

  My problem is I want to upgrade the ram in this unit and cannot find instructions how to disassemble in order to

  install the new ram.  I know how to change a regular desk set up, but not these all-in-one.

  You will appreciate any help I can get will be greatly appreciated.

  Thanking you in advance,

  leila1939

  Hello

  Please check this:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/need-instructions-for-installing-RAM-in-my-HP-Omni-100-5155-all/m-p/1747233

  Good luck.

• 100-5050

  • HP desktop all-in-one 100-5050 model.
  • My computer won't turn on.  The power LED light in the back and I can hear the fan
  • but the screen does not light and my front LED lights.
  • I use windows 8.1.
  • There is no flashing cpu led
  • Please can someone help me solve this problem to a specific module?
  MNB

  Hello @Ubruce,

  I understand that your computer does not completely start and your power light is on, but nothing else, in addition to the powers of fan upward. The problem you describe seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

  I want to thank you for display on the HP Forums. Have a great day!

• Install my HP all in one

  I can't my HP 5600 all in one to install on my HP Omni 100. Error message: the operating system on this computer is not supported. The operating system is Windows 7.

  Hello

  PLS, click on the link below to install your printer...

  Install printer windows 7

  Thank you

• How can I print from my galaxy s4 and hp officejet 150 mobile printer all in one

  I have connected my 150 mobile all-in-one hp officejet to my lap top.  Now, I want to connect my printer on my galaxy s4 Bluetooth smartphone, but the phone is new and I'm not sure the next steps.  Help.

  Hi John. Officejet 150 mobile as you know is a Bluetooth printer.
  
  HP does not offer an impression of the Android operating system solution Bluetooth:
  
  See "Printing Bluetooth with a mobile device":
  
  http://support.HP.com/us-en/document/c03143772
  
  
  
  There are, however, 3 3rd Party Apps that can work for you. Do not forget that they are not officially approved by HP and not guaranteed.
  
  user "jbarsgixxer" of this post said "printershare" worked for him:
  
  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/setup-OfficeJet-mobile-100-and-150-via-Bluetooth/TD-p/706761

• Upgrade processor HP Omni 100-5200z

  I want to know I can upgrade my Omni 100-5200z PC. I do a lot of video editing and have tons of problems. I currently have n AMD Athlon II 170u processor 2.0 ghz, but I need a dual-core or multi core. Can I switch, if so with what and is something med I can do myself thank you

  Storm99,

  Daniel has formulated a hypothesis unfortunately all wrong.

  There are only 3 CPU for this computer, all the 25W. See your system specs here:

  http://support.HP.com/us-en/document/c02822223

  The max would be the Athlon II 270u (Regor) (25W) 2.0 GHz

  PS > you power supply is only of 90W.