On a "home" network remote access
Im a volunteer at my church and Im help the office. They have recently implemented a new workstation running Windows 7 Edition Home Premium. Admin Asst has 8.1 Windows Pro. She would like to access the Win 7 machine remotely because it has an application it needs to consult and can't always walk to the office where its located. I tried accessing it on several occasions, but the machine to WIN 8 can't see Win 7 (I can map the Win 8 machine records so he does not see the device). I tried the name and IP address.
Can I assume that a workstation running Windows WELCOME editions cannot be accessed remotely by? Thank you.
Bklynrr
There is a much easier way. There is a 3rd party app called team Viewer which is easy to use, the test bullets and free to use.
This is the gold standard for those of us who need to do remote access
http://www.TeamViewer.com/en/index.aspx
Tags: Windows
Similar Questions
-
Cisco vpn 5.0.07.0440 - k9 connected but not the network remote access to Windows 8.1 pro
I use 5.0.07.0440 - k9 vpn Cisco and Cisco vpn 5.0.07.0290 - k9 both version on our 8.1 Windows Mobile pro.
VPN connected successfully, but not remote access network and receive no ping.But when I try with wifi and vpn, then good job.
Please help me as soon as possible.
Thank you
SanjibIt is very problematic on Windows 8 and EOL now.
Kind regards
Nehmaan
-
Windows home server 2011 - remote access error - wrong password or account to GoDaddy
My windows Home server remote access does not recognize the domain, I've implemented into Go Daddy.
The login and the password are considered bad by the wizard.
Of course I can access with login and password to godaddy.com and everything is nominal.
I noticed the problem 4 weeks ago. No solution has worked so far.
I tried even to remove the entry in the register (via REGEDIT), I found a link to that in the past. But the problem remains.
I fear that some change was introduced on the way the security part
Hello
I suggest you post your query on the TechNet forums to get help. Consult the following link:
It will be useful.
-
After the remote access connection, network printers disconnected
I hope someone can help me here.
In Windows Vista, whenever I would give the remote access connection to my PC at home, my default printer (which was be a shared printer on the network out of my server) will prepare its default value. It was boring but easily fixible.
I've since upgraded to Windows 7 Ultimate and I'm having a related problem. Now every time I connect remotely to my home PC, my default printer (same network shared printer - HP LJ 4000) disconnects, and it only comes back online after a reboot.
It is a point of pain is huge for me because I usually 20 + / applications windows running at a given time and a restart takes 30 minutes out of my day to get back to where I was.
Any help would be appreciated. Jeff Balcerzak
-
do not access my home network via antconnect
I am able to connect through the anyconnect client and get an ip address, but I am not able to access my administration (internal network)
Administration = 10.18.1.120
VPN pool = 172.16.10.0/28
10.17.13.120 outside
This is my config
ASA 1.0000 Version 2
!
!
interface GigabitEthernet0/0
nameif administration
security-level 100
IP 10.18.1.120 255.255.0.0
!
interface GigabitEthernet0/1
nameif outside
security-level 0
IP 10.17.13.120 255.255.0.0
!
interface GigabitEthernet0/2
nameif admin-out13
security-level 0
IP 10.13.1.120 255.255.0.0
!
interface GigabitEthernet0/3
nameif VOIP
security-level 0
IP 10.90.100.120 255.255.0.0
!
passive FTP mode
network of the NETWORK_OBJ_172.16.10.0_29 object
subnet 172.16.10.0 255.255.255.248
network of the Admin_Email_Server object
Home 10.18.4.120
e-mail Description admin server
network of the Admin_Srv_Farm object
10.18.4.0 subnet 255.255.255.0
Description subenet where the admin servers are hosted
ICMP-type of object-group ICMP_Group
alternate address ICMP-object
ICMP-object-conversion error
echo ICMP-object
response to echo ICMP-object
ICMP-object information-response
ICMP-object-request for information
ICMP object-mask-reply
Mask-request ICMP-object
ICMP-object mobile-redirect
ICMP-object-parameter problem
redirect ICMP-object
ICMP-object-announcement of router
ICMP-object-solicitation of router
Object-ICMP source-quench
ICMP-object has exceeded the time
ICMP-object-response to timestamp
Timestamp-request ICMP-object
Object-ICMP traceroute
ICMP-unreachable object
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
pager lines 24
Enable logging
asdm of logging of information
management of MTU 1500
administration of MTU 1500
Outside 1500 MTU
Admin-out13 MTU 1500
ip_phones MTU 1500
local pool ADMIN_VPN_POOL 172.16.10.1 - 172.16.10.10 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
NAT (administration, outside) static source any any static destination NETWORK_OBJ_172.16.10.0_29 NETWORK_OBJ_172.16.10.0_29 non-proxy-arp-search to itinerary
public static NETWORK_OBJ_172.16.10.0_29 NETWORK_OBJ_172.16.10.0_29 destination NAT (outside directors) static source Admin_Srv_Farm Admin_Srv_Farm
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
LOCAL AAA authentication serial console
AAA authentication LOCAL telnet console
the ssh LOCAL console AAA authentication
Enable http server
http 10.18.0.0 255.255.0.0 administration
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = admin-pare-fire
Configure CRL
string encryption ca ASDM_TrustPoint0 certificates
Crypto ikev2 activate out of service the customer port 443
Crypto ikev2 access remote trustpoint ASDM_TrustPoint0
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd address 10.90.100.1 - 10.90.100.100 ip_phones
dhcpd 4.2.2.2 dns 8.8.8.8 interface ip_phones
dhcpd lease 1800 interface ip_phones
dhcpd field uz.ac.zw interface ip_phones
dhcpd option 3 ip 10.90.1.254 interface ip_phones
ip_phones enable dhcpd
!
!
maximum session 1000 TLS-proxy
!
a basic threat threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
AnyConnect profiles ITADMIN_VPN_client_profile disk0: / ITADMIN_VPN_client_profile.xml
AnyConnect enable
tunnel-group-list activate
internal GroupPolicy_ITADMIN_VPN group strategy
attributes of Group Policy GroupPolicy_ITADMIN_VPN
WINS server no
value of 10.18.4.120 DNS server 10.50.7.178
client ssl-VPN-tunnel-Protocol ikev2
uz.AC.ZW value by default-field
WebVPN
AnyConnect value ITADMIN_VPN_client_profile type user profiles
webster nwgth7HVlZ/qiWnP password encrypted username
webster username attributes
type of remote access service
username admin password encrypted xxxxxxxxxxx privilege 15
username user2 encrypted password privilege 15 xxxxxxxxxxx
attributes of user user2 name
type of remote access service
type tunnel-group ITADMIN_VPN remote access
attributes global-tunnel-group ITADMIN_VPN
address ADMIN_VPN_POOL pool
Group Policy - by default-GroupPolicy_ITADMIN_VPN
tunnel-group ITADMIN_VPN webvpn-attributes
enable ITADMIN_VPN group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
class class by default
Statistical accounting of user
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c9820a69d5b4fb9e3f7cce253f2450e4After the addition of administration management-access command, please check if you are able to ping to the administration interface (ip = 10.18.1.120) of the remote user's machine. In addition, run this command on the ASA.
Packet-trace entry administration icmp
8 0 detailed Once you run this copy please order the output and the share here. Please see links to the ip address of the host, sitting behind the administration interface that you think that the ip address of the internal host should be able to ping from outside. Assigned ip address is the ip address that is assigned to the pool anyconnect client.
Share the details here and we will be able to understand the question.
Thank you
Vishnu
-
Client remote access VPN gets connected without access to the local network
: Saved
:
ASA 1.0000 Version 2
!
hostname COL-ASA-01
domain dr.test.net
turn on i/RAo1iZPOnp/BK7 encrypted password
i/RAo1iZPOnp/BK7 encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside
security-level 0
IP 172.32.0.11 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 192.9.200.126 255.255.255.0
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
nameif failover
security-level 0
192.168.168.1 IP address 255.255.255.0 watch 192.168.168.2
!
interface Management0/0
nameif management
security-level 0
192.168.2.11 IP address 255.255.255.0
!
passive FTP mode
DNS server-group DefaultDNS
domain dr.test.net
network of the RAVPN object
192.168.0.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.168.200.0_24 object
192.168.200.0 subnet 255.255.255.0
network of the NETWORK_OBJ_192.9.200.0_24 object
192.9.200.0 subnet 255.255.255.0
the inside_network object-group network
object-network 192.9.200.0 255.255.255.0
external network object-group
host of the object-Network 172.32.0.25
Standard access list RAVPN_splitTunnelAcl allow 192.9.200.0 255.255.255.0
access-list extended test123 permit ip host 192.168.200.1 192.9.200.190
access-list extended test123 permit ip host 192.9.200.190 192.168.200.1
access-list extended test123 allowed ip object NETWORK_OBJ_192.168.200.0_24 192.9.200.0 255.255.255.0
192.9.200.0 IP Access-list extended test123 255.255.255.0 allow object NETWORK_OBJ_192.9.200.0_24
pager lines 24
management of MTU 1500
Outside 1500 MTU
Within 1500 MTU
failover of MTU 1500
local pool RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 IP mask
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 66114.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
NAT (it is, inside) static static source NETWORK_OBJ_192.9.200.0_24 destination NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.9.200.0_24
Route outside 0.0.0.0 0.0.0.0 172.32.0.2 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
Enable http server
http 0.0.0.0 0.0.0.0 outdoors
http 0.0.0.0 0.0.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
Terminal registration
name of the object CN = KWI-COL-ASA - 01.dr.test .net, C = US, O = KWI
Configure CRL
Crypto ikev1 allow outside
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.9.200.0 255.255.255.0 inside
Telnet timeout 30
SSH 0.0.0.0 0.0.0.0 management
SSH 0.0.0.0 0.0.0.0 outdoors
SSH 66.35.45.128 255.255.255.192 outside
SSH 0.0.0.0 0.0.0.0 inside
SSH timeout 30
SSH version 2
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
internal RAVPN group policy
RAVPN group policy attributes
value of server WINS 192.9.200.164
value of 66.35.46.84 DNS server 66.35.47.12
VPN-filter value test123
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value test123
Dr.kligerweiss.NET value by default-field
username test encrypted password xxxxxxx
username admin password encrypted aaaaaaaaaaaa privilege 15
vpntest Delahaye of encrypted password username
type tunnel-group RAVPN remote access
attributes global-tunnel-group RAVPN
address RAVPN pool
Group Policy - by default-RAVPN
IPSec-attributes tunnel-group RAVPN
IKEv1 pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory 2
Subscribe to alert-group configuration periodic monthly 2
daily periodic subscribe to alert-group telemetry
aes encryption password
Cryptochecksum:b001e526a239af2c73fa56f3ca7667ea
: end
COL-ASA-01 #.
Here is a shot made inside interface which can help as well, I've tried pointing the front door inside the interface on the target device, but I think it was a switch without ip route available on this subject I think which is always send package back to Cisco within the interface
Test of Cape COLLAR-ASA-01 # sho | in 192.168.200
25: 23:45:55.570618 192.168.200.1 > 192.9.200.190: icmp: echo request
29: 23:45:56.582794 192.168.200.1.137 > 192.9.200.164.137: udp 68
38: 23:45:58.081050 192.168.200.1.137 > 192.9.200.164.137: udp 68
56: 23:45:59.583176 192.168.200.1.137 > 192.9.200.164.137: udp 68
69: 23:46:00.573517 192.168.200.1 > 192.9.200.190: icmp: echo request
98: 23:46:05.578110 192.168.200.1 > 192.9.200.190: icmp: echo request
99: 23:46:05.590057 192.168.200.1.137 > 192.9.200.164.137: udp 68
108: 23:46:07.092310 192.168.200.1.137 > 192.9.200.164.137: udp 68
115: 23:46:08.592468 192.168.200.1.137 > 192.9.200.164.137: udp 68
116: 23:46:10.580795 192.168.200.1 > 192.9.200.190: icmp: echo request
COL-ASA-01 #.
Any help or pointers greatly appreciated, I have do this config after a long interval on Cisco of the last time I was working it was all PIX so just need to expert eyes to let me know if I'm missing something.
And yes I don't have a domestic network host to test against, all I have is a switch that cannot route and bridge default ip helps too...
Hello
The first thing you should do to avoid problems is to change the pool VPN to something else than the current LAN they are not really directly connected in the same network segment.
You can try the following changes
attributes global-tunnel-group RAVPN
No address RAVPN pool
no mask RAVPN 192.168.200.1 - 192.168.200.254 255.255.255.0 ip local pool
local pool RAVPN 192.168.201.1 - 192.168.201.254 255.255.255.0 IP mask
attributes global-tunnel-group RAVPN
address RAVPN pool
no nat (it is, inside) static source NETWORK_OBJ_192.168.200.0_24 NETWORK_OBJ_192.168.200.0_24 static destination NETWORK_OBJ_192.9.200.0_24 NETWORK_OBJ_192.9.200.0_24
In the above you first delete the VPN "tunnel-group" Pool and then delete and re-create the VPN pool with another network and then insert the same "tunnel-group". NEX will remove the current configuration of the NAT.
the object of the LAN network
192.168.200.0 subnet 255.255.255.0
network of the VPN-POOL object
192.168.201.0 subnet 255.255.255.0
NAT (inside, outside) 1 static source LAN LAN to static destination VPN-VPN-POOL
NAT configurations above adds the correct NAT0 configuration for the VPN Pool has changed. It also inserts the NAT rule to the Summit before the dynamic PAT rule you currently have. He is also one of the problems with the configurations that it replaces your current NAT configurations.
You have your dynamic PAT rule at the top of your NAT rules currently that is not a good idea. If you want to change to something else will not replace other NAT configurations in the future, you can make the following change.
No source (indoor, outdoor) nat Dynamics one interface
NAT source auto after (indoor, outdoor) dynamic one interface
NOTICE! PAT dynamic configuration change above temporarily interrupt all connections for users on the local network as you reconfigure the dynamic State PAT. So if you make this change, make sure you that its ok to still cause little reduced in the current internal users connections
Hope this helps
Let me know if it works for you
-Jouni
-
My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:
(1) remote access to the server is not enabled
(2) the remote computer is disabled
(3) the remote computer is not available on the network
Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.
Obviously, I am missing something or something wrong. Please help me to understand.
What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?
See this help as possible...
http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html
-
Hello!
I read the articles on access distance to another mac, but what I need is to remote access to files on airport time capsule without a great second computer mac at home.
Only Mac... Mac you will use for remote access to files on the Time Capsule... is necessary.
-
All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?
Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.
Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?
Laughing out loud
-
Home network (MSHOME) working group worked OK for the last 3 years. DSL, with an attached DLink wireless router cable modem. The network has been implemented with a Lenovo Thinkpad R60 that Windows XP with a USB attached HP PSC 1210 printer (X computer). My daughter got a second ACER laptop with Windows XP (computer Y) and I used the floppy disk created by the network configuration wizard to get connected to the network, everything worked OK. My wife is the mini netbook HP under Windows7 starter edition (Comuter Z) and I used the same disk to be connected, and I made sure that the Working Group has been installed as (MSHOME). Lenovo Thinkpad (computer X) appears on the list of network devices (computer X, Y and Z) but when I started to ADD a new printer, after selecting (computer X) a message box pops up saying ("Windows cannot access (computer X), you do not have permissions to access (X computer).") Contact your administrator to request network access). How can I do this?
Hello
Make sure that the share is configured correctly on each computer:
Networking of computers running different versions of Windows
http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows -
Unidentified network Local Access only on Vista Home Basic using Ethernet.
Have 2 laptops not identified network Local Access only on Windows Vista Home Basic. One is a Toshiba and the other is a Dell. I can use the Ethernet on the Toshiba to one of the The Fire Dept. I work at. (From lastweek, haven't checked since.) I can't go to the other Station. Get Local access to the unidentified network only. I get also home and when I checked the Dell, get the same message. I can connect wirelessly. How can I solve the unidentified network problem?
Hello
If your system is running Hello , Netmagic or any other party 3rd network try to uninstall.
Try also.
Type Cmd in the search text box.
Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt. Allow the elevation.
Type route delete 0.0.0.0 press ENTER.
Type ipconfig/flushdns press enter
Restart your computer.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Home network problem cannot access one of that PC even if should be able
I ran into a problem... I have a PC running Windows Vista and Windows 7 PC on my network home. I can 'see' each from the other PC PC when I go on the network. The Windows Vista-based computer can access shared folders on the Windows 7 PC... and the Windows Vista computer can share items specially for windows 7 PC SHOULD have access to these folders. I placed the user for the Windows 7 PC as co-owner. HOWEVER, when I go to the network on the Windows 7 option, I select the Vista PC in the network thinking it should then show me the file and instead, troubleshooting network appears.
When I go to the troubleshooter, it says that it can't find the Vista machine... even if it it displays network before I tried to access it.
They are both in the same workgroup. I checked the machine windows 7 has permission for the folder in question indeed. and I've checked that the machine of windows Vista CAN access folders on the windows machine 7...
No idea what I'm missing?
Thank you!
Hi Jim,
1. did you change any software on the computer?
2. where you can access files on Windows Vista earlier?
Method 1:
Please click on this link to find how to share files and specific folders with someone,
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone
Method 2:
Disable the antivirus/firewall softwareand check if it helps.
http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software.
Warning: If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3:
Turn off sharing protected by password:
Password sharing is enabled by default for computers of working groups. When password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer. There are two ways to enable file or printer sharing:
o identical user accounts create on all computers in the workgroup (recommended). For more information, see create a user account.
o turn off password protected sharing. To turn off password protected sharing, follow these steps:
a. open the network and sharing Center by clicking the Start button on the Control Panel, click Network and Internet, and then click Network and sharing Center.
b. under sharing and discovery, click the arrow next to password protected sharing.
c. click turn off password protected sharing, and then click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Please, try the following steps and check.
I hope it works!
-
Home network works great, remote desktop will not connect.
I have a Windows 7 laptop and a Vista laptop. They are connected to a secure wireless network. Both work very well as standalones. When I try to connect via Remote Desktop or connect with each other. My 7 is in a homegroup with a single name. My Vista is in a WORKING group with the same name. I can't connect either using remote desktop. Computer for both names are names of a single word, 'XXXXXX', not the format xxx.xxxxx.xxxx and I can't figure another way to their name. I spent 2 days serching various tech forums and tried what they suggested.
Hello
Homegroup is a unique feature of Win 7. It uses IPv6.
As you connect to Vista you must configure Windows 7 to the home network.
------------------------------------
Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
------------------
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructionsGeneral example, http://www.ezlan.net/faq.html#trusted
Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .
Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET
-
Cannot access shared folders on the home network.
Until a few days ago, I had a successful network operation consisting of two Vista Home premium computers and two XP Home. I have not had problems with opening files or folders before, but now I find I can access shared files and folders on the computer units XP vista, but cannot open the computers XP Vista of the units of the. I get the following message:
\\user-D5139A8DF2\desktop on IBM is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
Not enough server storage is available to process this command.
I checked the registry as suggested, computers are all on a home network with the same workgroup name. One solution I found in the forums has to do with my anti-virus Norton N360, but as all my computers are using the same version of that I'm uncertain or not to change the settings. It's very frustrating. Can anyone offer a solution or suggestion, please?
Hello
It might be Norton.
If not for "insufficient server memory is available to process this command."
Read this, http://support.microsoft.com/kb/106167
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Remote access under Vista Home Premium computer
All the instructions I've seen for remote access to my computer layout calls for a different Version of Windows. I find it a bit of a rip off. At the time where the user had a little more control of his machine, if he had the guts to try, you could always find a workaround or solution to another way to accomplish the task.
I wonder: is there a fix for this problem?
I am taking my current office in the Brazil and by setting up there. I wish I can access it from the United States and the thought that I could put in place so I could do. But I don't want to upgrade to another version of windows on it. I'll try to access using a laptop running Windows 7. can someone help me with this problem?
Thank you very much for your answers.
It is a Forum of Vista. To Windows7 questions, you need to republish your question in the Forums Widows7: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where someone who specializes in issues of Windows7 and procedures will be more than happy to help you with your problem. It is possible that your computer in the States works under Vista, but the computer controlling the process is the initiating access and that is why you need to post on the forums of Windows7 (although you will certainly also have to make some changes to your computer in the States to allow remote access works correctly).
In the meantime, here is an article that applies to both Vista and Windows7 that could help with the basics: http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/. I do not know thay will tell you more and better in the other forum. BTW, I have no idea if Windows7 supports remote access or remote with antyihing desktop - other than the Windows operating system, but you can ask in the other forum. I suggest to use the network, Email and online Forum here because it is above all a network problem.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
NB 100 cancelled xp install to halfway now stuck
My daughters netbook nb100 has ubuntu or anything on this subject, she has probs so I said that I don't know anything about ubuntu it I put xp on. Got my old xp drive (had a lot of licenses it a former construction company) and slipstreamed SP3 on th
-
can I see previous devices that have logged on to my iCloud account?
-
Change icon - initial folder browse changed
Recently a strange thing: when I browse to change icon, instead of start Sys32, he started in the folder that I recently watched an icon. However, little of what erks me is that long ago I asked whether her search for a start icon folder could be cha
-
My new U2414H I have a mass purge of backlight. The previous was already exchanged cause there was also a mass purge of backlight. Right now I don't know what do more. Here are pictures of the monitor. When I play games or watch a movie, the light is
-
How can I delete the message from the voicemail from the screen of a SPA302D
I have two combined SPA302D recorded on a SPA232D basis. My voip provider (voipfone.co.uk) provides a voicemail service. If it does not respond to a call, it is recovered by the voicemail system. A voicemail icon on the SPA302D with the number of me