On Lenovo Ideapad S10e Audio installation problem

Similar Questions

• Resolution of the Lenovo Ideapad S10e

  Hello

  I want to change my resolution of Lenovo Ideapad S10e. She was set to 1024 x 576 pixels.

  Can anyone advice me on this? or this parameter is fixed!

  Answer me as soon as possible.

  Hi and welcome to lenovo forum

  .. You can spend in virtual XP more big screen... the screen itself has physical resolution to 1024 x 576, but you can move the entire desktop inside this limitation...

  Read here how to...

  > 1024 x 576 resolution / 600  Only works with XP

  cordially KalvinKlein

  ------------------------------------------------------------------------------------------------------

  You want more? For more information to get the most out of your machine S-Class

  Establishment of Lenovo

  Backup

  Driver Windows 7

  Windows 7 Install

  Clean install of XP

  Starting XP

  Guide to WebCam

  Lenovo easy Capture

  > 1024 x 576 resolution / 600  Only works with XP

• WOL on Lenovo IdeaPad S10e

  Hi all

  I've been looking around various forums, but have not been able to find an answer to the following question.

  Is the Lenovo IdeaPad s10e (4187-5LG) off Wake On Lan full support?

  I was able to wake him from sleep mode and sleep, but not completely extinguished. I can't see all the settings in the BIOS to enable or disable wake on LAN. I think that I can't stand of WOL, but the client that I work with the needs to know.

  I hope one of you have the answer!

  Thanks in advance

  Hello and welcome,

  No there are no WOL function in Ideapad S-Series feature.

  cordially KalvinKlein

• Lenovo Ideapad S400 Touch screen problem.

  Original title: Lenovo Ideapad Touch - Touch Ghost S400

  Hi all

  I'm tapped with continuous tapping of the touch screen of my laptop, even if no one is in contact with it.

  This often happens when I use the touch screen or leave my laptop on for too long. I tried to disable and uninstall the drivers for the touchscreen device but it keeps appearing whenever I start my PC in Device Manager.

  Someone knows how to fix this? I've already sent this unit to the service center, but the problem persists.

  Hi Vlad,

  Thanks for the reply.

  The problem persists even after installing new drivers and calibration of the touch settings, this could be a problem with the hardware. I suggest you to contact the Lenovo Support for assistance on this issue.

  http://support.lenovo.com/en_US/feedback/contactsupport.page?

  Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.

• Lenovo Ideapad 11s Yoga camera problems

  Hi all

  My webcam integrated on my lenovo yoga idea seems to be malfuncitoning. When I try to open any device using applications, the screen is black without error message or visible problems. When I check in the Device Manager the device says all drivers are updated and it is in working condition. At all the world is facing this problem / solution without sending it to the computer for repairs? Any help you can offer me would be greatly appreciated.

  I tried many things / things that others have suggested and did not work:

  FN + esc

  Try in other applications outside the camera

  Check for driver problems Device Manager

  Updated drivers

  Turn off the camera

  Thanks in advance,
  Randall

  He always appears. I called Lenovo support and came to the conclusion that it is a problem with the camera while they are currently fixing. Thanks for your attempt.

• Lenovo g550 xp sp2 installation problem

  I bought Lenovo G550 laptop computer without an operating system.

  Now, I can't install Windows xp sp2. When I try to install, it appears a blue screen and says to the chekdisk / f, I did, but nothing, I can not install xp service pack 2

  Can someone help me plssss...

  Press f2 for bios and modify the property in the bios to ahci to ide

• Adapter network on laptop computer Lenovo IdeaPad U350, works do not since upgrading to Windows 7.

  Hello.
  Am running windows 7 on a laptop computer Lenovo IdeaPad U350, but experiencing problems with the network adapter. Wireless connection works, but I can not connect via the direct cable connection. All of the updates were made and in device, the network card Manager (Broadcom 802.11 g network adapter) seems to work fine, BUT still I can't connect. I downloaded the driver from the manuvacturer (Lenovo) and installed. He still does not!

  Any ideas how to solve this problem? I am currently connected to the internet via a wireless connection, but need a wired connection.

  PLEASE HELP :)

  Here's a solution - eventually had to resort to using the Ethernet coz I had to transfer massive amounts of data and using the WiFi was just a bad idea.

  Agree with the above the drivers Lenovo doesn't have just a whole bunch of stuff (unzip, etc, etc) and curiously does not seem to go through the process to INSTALL anything... disappointment.

  For those of you who know how to get to the old plant 'Disc' (Yes, they still exist in Win7), you can get your hands on the drivers here http://www.broadcom.com/support/ethernet_nic/netlink_k57.php--est comes with the good old INF files to tell the system what and where to install

  Go to disc (fuck..... another Google process [Bing since I'm on a MS Web site] the answer)...

  0 have the Admin rights
  1. open your browser.
  2. right click on computer / my computer > properties > Device Manager
  3. I hope that the offending devices (Ethernet in this case) shows prominently in the other category
  4 click on it > properties
  5 looking around for the the driver update button
  6 browse my computer for training software
  7. just choose from devices... (blah blah)
  8 have Disk (tada!)
  9. then point just where you have unpacked the driver with the permission of Broadcomm files.

  Hope that helps.

• Lenovo IdeaPad Z570 - problem disk MBR/GPT (or BIOS/UEFU)

  Hello!

  Someone would be kind enough to tell me how I can disable the UEFI BIOS of my Lenovo IdeaPad Z570 mode?
  (I can see very little things and options in the menu of the BIOS for the moment).
  It is necessary, as I want to reinstall Windows 7 Home Premium on my computer and during installation there is an error message - while choosing the partition where to install the system: "Windows cannot be installed to this disk. The selected disk is a MBR partition table. On EFI systems, Windows cannot be installed on GPT disks. »
  And I read somewhere that disable UEFI mode would solve the problem.

  Furthermore, I have ideas or suggestions for this problem.

  There are two solutions for your problem.

  CAVEAT! The two ways in which I am proposing are going to ERASE ALL OF YOUR DATA on YOUR HD! If you what you want to backup, copy before doing so.
  First of all, easy, is to delete all partitions on your drive through the windows setup utility. Then, windows will offer to convert GPT disk.
  Or, if windows is not this "automatic" way, you can convert GPT disk using diskpart.
  To do this, use this manual to access the http://www.sevenforums.com/tutorials/682-command-prompt-startup.html of the console

  Then, type following commands

  DiskPart

  Wait until it loads, then

  LIST DISK<-- this="" will="" list="" currently="" connected="" disks,="" you="" should="" determine="" which="" of="" the="" disks="" is="" the="" one="" on="" which="" you="" want="" to="" install="" windows="" and="" remember="" its="">

  SELECT DISK <0> <--you should="" replace=""> <0>with the number you had on the previous step, in most cases, it would be 0

  CLEAN

  CONVERT A GPT

  CREATE PARTITION EFI SIZE = 200 OFFSET = 1024

  SELECT PARTITION 1

  FORMAT FS = FAT32 QUICK

  CREATE PARTITION PRIMARY SIZE = OFFSET = 206848

  SELECT PARTITION 2

  FORMAT FS = NTFS QUICK

  That should be all) after that, you should be able to install windows on your hard drive.

• Lenovo Ideapad U310 speaker problem

  Hi all

  My U310 of Lenovo Ideapad has had problems of speaker,

  The headphones work correctly, but the built-in speakers that are Awefully located inbetween as the hinge and the base of the screen do not work.

  I first thought it was a problem with the headphone jack that could have cut the circuit internal speaker because of the incorrect removal of the headphone jack, but it is not true because I've noticed that its a problem with the angle I keep tilt of the screen.

  On the passage of the screen at any angle above 90 or 100 degrees, the speakers cut in and are activated once its below 80 degrees.

  I'm a little worried about the words on it?

  Kind regards

  raisedadead.

  THANK YOU VERY MUCH IN ADVANCE!

  Thank you Alaa,

  The problem is now solved, mainly the mobile hinge was obstruction in fact the thread that connects the speakers, according to the service technician. Need to replace the wiring had been damaged by the hinge. A manufacturing problem small on the wire does not correctly connected to the hinge. Thank you

• Lenovo Ideapad U260 multi-touch trackpad problem

  Hello, I'm from Mexico, I bought a Lenovo Ideapad U260 during a trip to the United States. I fell in love with this powerful small laptop immediately, but I don't know if he has a driver problem or simply too awkward on the trackpad multitouch glass im.

  How to activate the feature on the glass trackpad multi-touch?

  I have to wonder the parameters of the pit, or I have to update some drivers? (This is the Core i5 btw)

  Thanks in advance.

  Control Panel > hardware and sound > mouse > device settings > settings (if you have synaptic hardware)

• Lenovo Ideapad y560 (Windows 7 sp1) bios (30CN71WWW) update problem

  Hello

  I am a Lenovo ideapad y560 user. I tried to load the '30CN71WW' but blocked loading Bios Update.

  "Could not load the driver C:, bios, 30CN71WW, PHLASHNT. SYS.

  Please verify that your accounts, if you have no administrator privileges, please sign in again!

  This driver has been blocked by a loading

  Error code: 1275 "

  What can I do?

  Thank you

  Concerning

  Bülent

  Bülent

  You should contact Lenovo http://support.lenovo.com/en_US/

• How to connect Lenovo IdeaPad Yoga 13 5.1 speakers?

  Hello

  I want to buy Lenovo IdeaPad Yoga 13 (with processor i7, 8 GB RAM and SSD 256). But the main problem is that I don't know how to connect to System 5.1 surround.

  Currently, I have Dell Studio 1555 with 3 audio ports, so it's very simple, but this little laptop is not 3 ports. Is there another solution?

  Thank you

  Hello

  I bought a SoundBox USB breakout on amazon widget. won't cost that a tenner delivered, entry and telephone support microphone, output headphones plus 5.1 output and optical output.

  You can spend a little more to get a compatible system 7.1, but I got it only for entries to be honest (recording/mixing of music).

• How to restore an IdeaPad s10e to factory settings?

  Hi all! I'm new to this forum. I've looked everywhere for a solution to my problem and I can't find an adequate response.

  I have an IdeaPad s10e (which I love), but lately there have been strange and bizarre things going on with XP (network WPA - PSK protected works do not crash, windows that open by themselves programs). Until someone jumps and say "VIRUS!" is not that. I always take the necessary precautions to avoid this problem. What happened is that I used some StarDock programs to revamp XP and he started doing all these crazy things, I uninstalled them and it's always weird.

  Anyway, I wanted to restore my netbook to state of factory, but since I installed Ubuntu 9.04 and Windows 7 with XP my restore F11 option is missing. When I installed Ubuntu, the option was always there, but when I installed the Windows 7 RC cursed the charger ate this option. Now I have restored XP bootloader and deleted the Ubuntu partition, but the F11 option is still missing.

  So, what can I do?... I really want to restore my netbook back to normal. This time, Windows 7 won't be an option until I can buy the full version.

  So please help me. And I also read a few posts on the drive before using the netbook and other cloning, but none of that will help me. Lenovo support is not very useful.

  Thanks in advance!

  I thought about it. I reinstalled Ubuntu and used his GRUB Bootloader and then I was able to access the recovery partition. No expensive need recovery disc or contacting Lenovo to hear a long and boring excuse.

  Thanks for your replies!

• Lenovo Ideapad S510 guard remove WIFI connections.

  My Lenovo Ideapad S510 guard remove WIFI connections. When he falls, I have to unplug the router WIFI off and turn it on to get connectivity. Help appreciated - thanks

  Hello

  Please contact the Microsoft community.

  I understand that your Lenovo idea S510 controller keeps on WIFI connections a fall during the use of the Internet.

  I recommend you to check with the router manufacturer support you mentioned that issue gets fixed when you unplug the router.

  You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:

  • Corrupt or incompatible drivers.

  • Network connection settings.

  • Hardware or software problems.

  • There is interference with other devices.

  • Your router and your PC network card can not work together.

  I suggest you follow the below troubleshooting methods and check if it solves the problem.

  Method 1: Run the network adapter Troubleshooter

  If you cannot connect to a network, it could be a problem with your network adapter, the piece of hardware that allows your PC to connect to a network.

  First of all, try to use the network adapter troubleshooting utility to automatically find and fix some problems. This troubleshooting will be disable and re-enable the adapter and try a few other common repairs. Here's how:

  1. open the Control Panel by right-clicking on the Start button.

  2 in the search box, type Troubleshooting, and then click Troubleshooting.

  3 click network and Internet, run the utility network adapter troubleshooting, and follow the instructions

  on your screen and check.

  Method 2: Uninstall the network adapter driver and restart

  Try to uninstall the network adapter driver, and then restart your computer and have Windows automatically installs the latest driver. Here's how:

  1. right-click on Start, select Device Manager and navigate to the network cards > network adapter

  name.

  2 right click (or press and hold) the network card, and then select Uninstall > remove the driver

  software for this device box > OK to confirm that you want to uninstall.

  3 after uninstalling the driver, click on the Start button > power > restart.

  After restarting your PC, Windows will automatically search for and install the network adapter driver. Check to see if this solves your connection problem.

  If she does not then install download / install the driver from the websites of the manufacturers of Lenovo.

  I hope this helps. If the issue is not resolved, please get back to us and we would be happy to help you.

• Stuck on the Lenovo Lenovo Ideapad start icon, then gets stuck on the repair auto and trys to repair but failing

  I recently got a Lenovo Ideapad laptop computer of game for my birthday just to find that there a hard drive problem, now, recently, he crashed and will not start, simply stuck on the logo of Lenovo starting with the loading icon, but don't start trying system restore brings to this problem and it will also be occansionally trying to fix automatically just for blackscreen and crashed about five minutes after. I don't have a Windows disc because it was before the installation with a program so I don't think that I would need a.

  Hi Timmsey,

  -You are able to boot to the desktop?

  The issue may be caused if you have changed the hardware and software of the computer settings.

  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc.) except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download software updated driver for the device.

  You need a Windows 8 install disc to follow the troubleshooting procedures below. I suggest you connect to any other computer, and create a floppy disk to install Windows 8. Using this disk, you can perform the following troubleshooting methods. You can create the form of installation disk the steps here.

  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

   

  Method 1: Start the recovery environment with installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting to Choose an option screen.

  (e) click Advanced options in the form of resolution of the problems.

  (f) click Auto repair screen Options Advanced .

  (g) then choose the operating system by clicking on its button.

  (h) Windows 8 will then look for problems on the hard drives and verify that all required files are intact.

  Method 2: Run the restoration of the system of the Advanced Options screen.

  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b), select the exact time and the type of keyboard.

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting in choose an option screen.

  (e) click Advanced options in the form of resolution of the problems .

  (f) select System restore.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.