On machines Pro XP and Win7 Home premium, I throw FF18, Win7 toolbar seems to have been updated in 17, toolbar XP why?

Similar Questions

• Dual OS and W7 Home Premium

  I have an OEM (Elite e9280t) machine and wants to set up a configuration to dual-boot with W7 64 bit Home Premium and Linux (Ubuntu, v10.10). Is this possible with this version of Windows? I know that you can do with W7 Pro but what version Home premium? I have a good Suite of management/Boot Disk (Paragon) software. I have a lot of space on my HARD drive.

  Also, this will violate any part of my vices? Thank you very much in advance.

  P.S. I'd be ready to move to W7 Pro if necessary, as long as it is allowed by HP.

  Laurent,

  Install another OS is not going to void your warranty. Worst case, HP may ask you to use your recovery discs and reload the original OS.

  If you have two hard drives in RAID mode you can install the new OS on the second hard drive. You'll have to boom the size of hard drive 1 to adapt to the needs of the new operating system.  Unplug the data cable 0 disk hard when you perform the installation on hard disk 1.  Once everything works, and reconnect the hard drive 0. When you start, press the ESC key, then select the boot drive. I know it works because I use it on my system e9280t.

• Upgrade XP Pro SP3 to Vista Home Premium?

  I have XP Pro SP3 and a Vista Home Premium Upgrade disk. When I start the upgade of the workstation xp disc and put in the product key it gives me the option to clean install. It leaves me to upgrade.

  What is the problem and I can around it?

  I'd appreciate advice civilized!

  Hello

  There is no way of upgrading between XP Pro and Vista Home Premium.

  It must be done with a clean install.

  http://Windows.Microsoft.com/en-us/Windows-Vista/upgrading-from-Windows-XP-to-Windows-Vista

  See you soon.

• I have XP Home and Vista Home premium desktop computers. I can't print using a limited account and I can't share printer

  I have XP Home and Vista Home premium which are interconnected desktop computers. they have only two accounts.

  I am not able to get ashare a printer, or and I can print if I type something from the administrator account on the computer connected directly to the printer, I can't print using the account of this same computer - only on behalf of the administrator.

  I can't print at all using the Vista computer.  Is to show that they are networked - is do not know maybe it's that the XP needs a NETWORK map?

  I have two accounts, one is an administrator on a computer and the other is one Director on the other.  Help, please.

  There is a router.

  Hello

  Follow these methods and check if that helps:

  Method 1:

   

  Make sure discovery network and printer sharing are on by following the steps in the article:

   

  Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 2:

  You can also download from this link and check if it help you.

  Troubleshooting File and Printer Sharing in Microsoft Windows XP

  http://www.Microsoft.com/download/en/details.aspx?ID=744

• you want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Daul Boot Windows XP PRO sp3 and WIN7

  I want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Hello

  Access the link that has a video on how to set up a configuration to dual-boot between Windows XP and Windows 7: http://www.microsoft.com/showcase/en/us/details/ae3108ed-a8a1-4ba3-8698-01b8cedd2cf4

  Here's a few that has information on multiboot: can I have multiple operating systems on my computer (multiboot)? : http://windows.microsoft.com/en-US/windows7/Can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  Install multiple operating systems (multiboot): http://windows.microsoft.com/en-US/windows7/Install-more-than-one-operating-system-multiboot

• My computer will not install the last update of security mpam-fex64 [1] .exe. I have__Windows 7 Home premium X 64 based PC. Does anyone have any suggestions?

  My computer will not install the last update of security mpam-fex64 [1] .exe.  I have
  Windows 7 home premium, X 64 based PC.  Does anyone have any suggestions?  Windows gives me the message that the update failed.  I get the error 66 has code.

  Hello sajanclt,

  It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
  http://social.technet.Microsoft.com/forums/en-us/category/forefront

  They will be better able to help you.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• A few days, I bought a mac mini which I transferred the data and programs with time machine: programs have been updated except for iMovie, and now it seems that I have to pay for the update: possible? What I am doing wrong?

  A few days ago, I bought a mac mini and I transferred all my data and programs with time machine: all programs have been updated but iMovie (7.1.4)... However, it seems that, to update to the latest version, I have to pay to download on Appstore: is it possible? what I am doing wrong?

  If it were a new mac mini, you need already installed 10.1 iMovie.  Otherwise, but you already have iMovie 9 registered version to your Apple ID, you can upgrade to version 10 for free, but if (as it appears) is an earlier version then you have to buy version 10.

  Geoff.

• Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates

  Home premium Windows Vista 64-bit SP2 installed - will be not updated, still just trying to find loop updates.  He worked for years until now.

  How to fix?

  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-update/Vista-Windows-Update-does-not-work/8385103e-4117-4b0c-B21F-27a266fdf4a9

• I first pro cc and the follow-up is based on the mask. Yes I've updated. Thank you

  I first pro cc and the follow-up is based on the mask. Yes I've updated. Thank you

  You have both CC and installed CC2014, you sure you open the appropriate program? Often a desktop shortcut always related to the older version of CC and not CC 2014

• Is time Machine always being backed up to the folder My Documents/Desktop now that they have been sucked into the iCloud?

  Is time Machine always being backed up to the folder My Documents/Desktop now that they have been sucked into the iCloud?

  Yes. The files are still on the computer so that they will always be saved by Time Machine.

• the drive seem to have been partitioned by another utility and cannot be erased

  I have a MBP with 2 SSD. Yosemite is running on the SSD that has been partitioned 1 TB to a 150 / 850 GB volumes.

  I wanted to install Windows 10 using Boot Camp but after succesfully download Windows software support that I can not go to the next step where I have to choose a volume (Pluto). Wizard Boot Camp shows my SSD and when I chose the following warning is displayed:

  "the drive seem to have been partitioned by another utility and cannot be erased."

  I see that Pluto isn't GUID and maybe that's the problem, but there are already some data on the volume of 850 GB that I can't erase. Is there a way to fix this without destroying the data? I don't even know why Pluto doesn't have GUID in the first place...

  Thnx,

  G

  

  You have two entries 'Pluto '. The outermost is a volume CoreStorage group, which has two volumes, one is named Pluto, the other is TerraNova. The 512 GB of Samsung is your second physical disk. The Pluto in the BC Assistant is the complete LVG, not only the volume of Pluto, which contains also of Terra Nova.

  BCA does not support such a configuration on your MBP. You will need to backup your data or manually partition the disk and do a little terminal work, if you want to install Windows in this configuration. The second SSD will complicate it further. You may need to physically remove the disk non-windows in order to install Windows.

  Your end of 2011 Mac does not support Windows 10 as described in using 10 Windows on your Mac with Boot Camp - Apple support . You will encounter problems of pilot.

• I went to update and it won't let me update. It just says: to please quit and try again later and I continue fact that and still, it won't let me. My photoshop has not been updated in forever and my current photoshop lacks some fonts that I need fi

  I went to update and it won't let me update. It just says: to please quit and try again later and I continue fact that and still, it won't let me. My photoshop has not been updated in forever and my current photoshop doesn't have some fonts that I need to fix my Web site

  Hi jennah68228106,

  Please refer to the below given links:

  Troubleshoot Adobe Creative cloud download, install and update questions

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Do not install updates | Failure to update or U44M errors

  The activation and deactivation of Adobe problems

  Let us know if that helps.

• Try to configure Windows XP Pro and Vista Home Premium to connect wireless to a field internal.

  Hello. I recently graduated from a COMPUTER course that was very intense, but I don't think that it covered all the basics for me quite challenge the MCSA exams. In order for me to do, I bought a bunch of MS Press books covering ISA Server, Server 2003, Exchange, etc. My journey made us buy copies of Server 2003 and XP Professional, so that we can continue to practice at home.

  One of the things I wanted to do has been implemented a network in my home, using the software I have (not about to try 2008, although I think that one of the books I ordered comes with a version of a test - but it is in a game for the MSITP exams).

  This is how I currently have my network configuration. Currently, everything is wireless. I have 1 spare computer that I use as DC with active driectory.

  Currently I have a router D-Link DIR 655 (located in the basement) which acts as a gateway to the internet server and dhcp on my network and WPA2-PSK encryption use.

  I have a laptop with Windows XP Pro top (that I gave to my wife - old laptop I have baught strictly for the course, I took), and it is completely wireless. It is located on the ground floor.

  I have an office (located on the 2nd floor) using Vista Home Premium 64-bit. It's wireless.

  There is also a network of printers laser color next to the router in the basement, connected via an ethernet cable.

  On the main floor is also my Wii, which connects wireless.

  So, as you can see, it's a mixture of differnet devices connected through my router.  I have the Wii or the printer to connect to the domain specifically. The printer must be accessible to computers on the domain, but the wii should just be able to connect to the internet via the router.

  The spare box I have kicking around, I put 2003 on server and install active directory. I will also implement via this network storage server. I would like to put up to control the accounts of users of my wife and myself and that it uses roaming profiles.

  This works very well when it connects directly through, but how to configure something like this works wirelessly? I read something on another forum in which is setting up a wireless bootstrap, to authenticate against a Radius Server, and then log in to the domain. However I don't have the money to spend to get ISA Server.  The server will be basically be there just to provide roaming profiles and to store things out of our systems, incase we have problems with one of our computers. We could set up something for our own internal e-mail in the future, but since we live in the same House, it seems rather useless at the moment lol maybe set something in the future to let the other note or purchase or to do list. But for now, just want to configure what initially appears to be a single domain with roaming profiles.

  Everyone has tried to do that? Connection of the wireless networks in a field, with a router provides the address and gateway?

  Carlo

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server 2008 in a domain environment, and would be better suited to the Windows Server TechCenter community. Please visit the link below to find a community that will support what ask you:

  
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• What is the best for home PC Win 7 Pro or Win 7 Home Premium?

  Hello

  Can I know if professional Win7 and Win 7 Home Premium offer the same sound, graphics and video effects on a good PC at home?

  Y at - it any variation in the speed of startup and execution of applications like Outlook and Excel?

  I think that Win 7 Pro is a job more suitable fopr rather home entertainment, I'm good?

  Thank you

  Low

  Windows 7 Professional would be no advantage to specific items you mentioned.
  For more details on the differences, see http://windows.microsoft.com/en-US/windows7/products/compare

• Upgrade to Win 10 Pro of Win 7 Home Premium, Win Pro 8 & Win Pro 8.1

  Old PC died after the last update important victory 10 Pro.

  Bought a new PC.

  Installed my Win 7 Home Premium retail version.

  Trying to move up to Win 8 Pro in detail, followed by Win 8.1 Pro then the free win 10 Pro.

  Now I'm stuck to Win 8 Pro. The installer of Windows 8 got my key, but said "we cannot connect you right now. Check your internet connection and try again.

  As far as I know, my inet connection is fine. Win 7 updates are currently still to come...

  Someone has an idea?

  Why not just use your Windows Pro 8.1 product key or product key Windows 8 Pro to go directly to Windows 10 Pro?

  How to install and activate Windows 10 using your Windows 7 or Windows 8 product key