On movie maker how to cut movie in two parts on separate disks

Similar Questions

• How to cut between the two frames?

  I am completely new to Premiere Elements. I saw the capabilities of it on the internet and just had to buy this software, so I was pretty excited when my package came in the mail.

  My question has to do with timing. I want to create video clips with mp3 files. I have a software that analyzes music and tells me how many beats per minute, the audio files play at the. The file I'm currently working on that play on 128bpm which is approximately a video cut to about a timing divisible seconds par.47. However, I don't know where (or how) do first items cut a video to exactement.47 seconds since the Cup marker per frame, not necessarily going to timing.

  Any ideas would be greatly appreciated.

  With video, the lowest element is the setting. There can be no half, thirds or similar image - AN image only.

  If you need to adjust things, at a finer level, 1/24, 1/25th or 1/30th of a second, depending on the frame rate, the only choices are to adjust the sound, by a smaller percentage, or a higher percentage.

  Now, PrPro allows to work in Audio Units, so we could work with Audio in 1/48, 000th of a s, but for the video, would always be blocked in a unique setting.

  Good luck

  Hunt

• How do I mix the two parts of the same image in PS CS5?

  Hello!

  I hope someone can help me with this, as I'm still relatively new to Photoshop... I'm kinda stuck.

  I'm trying to build a part of the image that did not exist as a first step, using parts of the dress that are there.

  This is a screenshot of what I'm sitting with:

  

  I am satisfied with the shape, but now I just mix it all together, so it seems natural.

  Any advice would be much appreciated!

  Thank you.

  Ode

  What you might try is to add a mask and apply a gradient to the mask, or use a brush and a border of painting. Refine Edge can help as well.

• How to cut the great movie for download on YouTube

  In my Finder, in all the films, there is a video, I want to send on YouTube.  However, the original is very big at 1.64 GB (or at least that's what says "Get Info" in the Finder).  I already tried to divide the movie into 4 parts using the Trim function, but even in this case, each segment is between 300 and 420 MB each!

  Is there an easy way to divide the film into several parts, each of them being the maximum size accepted by YouTube?  I could call and then with part # s for download on YouTube. Not sure, but I think that YouTube has a max of 25 MB per upload to film?  So I guess I'll end up with way too many pieces, LOL.

  I could erase parts of the film strip, but I'm not familiar with the process and have "cut" never the movie of "front-end" or the "back-end" (well Yes, I said, I'm not an expert).   Bottom line: I want to get the movie in its entirety on YouTube somehow.

  All advice welcome.  The film is already 4 years old and I did not understand this in order to share with the family.

  R

  https://search.Yahoo.com/search?p=compressing%20video%20Files%20mac

  How about do your own research online for the You Tube tutorials for how to use the iMovie version you have on your OS X 10.6.8 iMac and how to edit clips make movies shorter and weaker in the size of the file.

  The discussions and the answers you need are too detailed tedious to cover in a forum for troubleshooting.

  A lot of YouTube videos for you help with your film questions of edition.

  You just need to look for the tutorial iMovie, you need.

  You had 4 years to do your own research on how to change your own created movies.

  YouTube has a lot of video tutorials to help you with this, and you can play these video the long while real using iMovie to make the tutorial!

  Good luck to you.

• make a slideshow in movie maker, how to extend the duration of a photo of a single image

  make a slideshow in movie maker, how to extend the time image (time peak is seen) a single image that is different from the default time?

  I posted the Live Movie Maker tutorial because
  your question is posted in a forum for Windows 7.

  In Vista Movie Maker 6... There are three ways
  to change the duration of a specific picture that
  is already on the timeline.

  FWIW... the change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  (1) you can increase or decrease the duration
  a specific image by adding an effect:

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  (2) for the timeline... you can change the
  duration for each clip manually. Move your
  pointer on on the edge of an element up to the
  you see a double arrow. Now, drag the
  double red arrow... you will see a ToolTip that
  Watch the evolution of life.

  (3) the term may photo on the timeline
  easily be doubled by simply adding another
  an instance of the same photo next to him.

• For Windows Movie Maker, how in the "film"?

  I'm trying to sing along with the music, but whenever I have it set on the Gateway Web Camera doesn't so I tried Windows Movie Maker, how to make me in the film with the song?

  Hi MackenziArcher,

  1 Windows operating system you are using?

  You can view the following items and see if it helps:

  Add music to your movie

  Publish a movie in Windows Movie Maker

  Hope this information is useful.

• In windows movie maker, how can I change my clips so that they all have the same duration after that I added the?

  Original title: Windows Movie Maker

  In windows movie maker, how can I change my clips so that they all have the same duration after that I added the?

  Hi Ashley44,

  You can use the trim function in Windows Movie Maker to change the duration of the film. See the link below for the steps

  To trim a video clip

  If you want more advanced features, you can use Windows Live Movie Maker

  http://explore.live.com/Windows-Live-Movie-Maker-stunning-in-seconds?OS=other

• AS2 how to make a button that moves every two seconds

  How can I make a button that moves every two seconds by itself in ActionScript2?

  For now, I have to use the command you (press), but what I really need, is the button in order to move randomly by itself every two seconds. For example:

  (insert the code here) {

  BC1._x = random (250)

  BC1._y = random (250)

  }

  Thank you!

  You can use the setInterval function repeated at specific time intervals.  Here is a link to a tutorial that explains how to use...

  http://www.republicofcode.com/Tutorials/Flash/setInterval/

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Adobe first Pro 2015 CC only!

  Please make sure that the audio and video tracks are highlighted.

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  You must set the source patch:

  

• PSE14: How to cut a big catalogue in three catalogs smal without losin all the tags?

  I have a catalog of lage in PSE14 (70,000 images). Now I want it divided into 3 new catalogues. I have created 3 new. But how can I move a selection of photos from the old to the new without lorine tags?

  clausm27391251 wrote:

  I have a catalog of lage in PSE14 (70,000 images). Now I want it divided into 3 new catalogues. I have created 3 new. But how can I move a selection of photos from the old to the new without lorine tags?

  See:

  http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#_Splitting_and_rearranging

  Just a note about the last paragraph:

  
  

  Alternatively, you can split a catalogue in two or more separate catalogs.  In the Organizer, they help > System Info to find the location of the current catalog folder. In Windows Explorer, make a copy of this catalog folder and change the name of the file the desired name for the new catalog.  In this new catalog folder, find the file "catalog.pse8db" (or .psedb/pse7db) and double-click it to open it in PSE.  Then delete the ones you don't want in this new catalogue (not to remove the disc).   Repeat to other subsets of the original catalogue.  Due to bugs in PSE 6, this method can break projects (e.g., slide shows).

  Copy the catalog and the deletion of unwanted images (deletion) seem to be a good idea to keep all the information, including albums, version sets and batteries. The problem is that the deletion of a lot of photos at the same time was virtually impossible in older versions of items. You need to remove the small batches at the same time, and it was very long. Otherwise, you have an overflow of the memory and the process would be giving up. With PSE14, it seems that the process of deletion, but very slow, works without error.

  Of course, when deleted, check the box: also remove the disc.

• I want to move a program from one hard disk to another is possible?

  I want to move a program from one hard disk to another is possible? I have the original disc to the software, but it is damaged. The hard disk that contains the program barely works, so I need to transfer all the programs and data to another drive. I used the transfer Assistant, but that will not transfer this program?

  Unless you make an exact copy of the installation CD, I'm not sure there is much else you can do.

  You can always try using a cloth and wipe the disc from the Center outward. That might do the trick. Or you can use a program like IMGBurn and create a new CD and hope for the best. Other than that, I'm ideas.

  IMGBurn:

  http://www.ImgBurn.com/

• Why don't the mpg2 files allow to move to different parts of the clip in XP? Vista lets me.

  Hello.

  Why don't the mpg2 files allow to move to different parts of the clip in XP? Vista lets me.

  Desktop: Windows XP 32-bit Home Edition. Laptop: Windows Vista Home Premium 64-bit.

  I have a DVD I paid for and used a software to copy video clips (unprotected) to mpeg2 files. There are 4 of them. It was a DVD recorded in 2004 at a dance event. It is not a commercial version.

  XP: The 1st clip allows me to open it in Windows Media Player 11 and I can drag autour in various places to look at different times of the clip. The clip of 2nd, 3rd and 4th are locked and won't let me pick different times to watch. They will play through.

  In Vista: I can't the cursor around anywhere, then select any time to look into all parts of clips with THE 4 clips.

  I took the clips, put them on a USB stick, moved in both sense between each system. I tried two more than once.

  I used the software to rip the clips on XP and Vista. It's the same result. The fault seems to lie with XP.

  Perhaps some of this DVD had some kind of protection against copying for XP but not Vista (and other OS of potentially). Or it's the encoder?

  My account has been locked or something, I couldn't answer.

  It is therefore probably encriptación with Windows Media player. I can read files with RealPlayer on Windows XP and Vista in Windows Media Player.

  Tried to use my software for video editing, re - export files in mpeg2. But each of them had sound problems. So, this is how the DVD is probably protected.

  I have something on Vista operating systems and a workaround with XP using RealPlayer for the original files. I'll keep looking. It's mine to archive all I want at this stage.

• How to cut this image?

  Hey guys, I have an image that I need to cut (remove background) and the background is almost in the same color as the hair. So the question is how I cut

  the brown background woman hair? Example: [I tried the eraser/clone stamp/magic wand but it looks like always * honestly.]

  

  A great idea as always of Norman.  I was going to go in the same sense that Christoph starting by the RAW file, which would have had much more potential for a background of contrasting color, then use them in calculations.  This is something I have not started that recently aid after that see http://www.nathanjosephdodson.com/Nathaniel Dodson on Tutvid testify, so I still homing on best practices, but using green red the value Add and -40 was the best I've had.

  You would still do better starting with the RAW file.  Treat twice and the brighter version just to make the selection of the layer.

  

• How to cut between clips?

  I don't know how to cut between two elements in a sequence.

  I downloaded a screencast documenting my frustrations: http://youtu.be/gIMspPJxXF4

  After download and carefully read Cup two-camera shoot and watch Multicamera editing in Adobe Premiere Pro CS6 - YouTube which is a little outdated since blocking UI is now hidden in the program monitor settings, I managed to make a montage which switches between my GoPro of my head and my screencast. But I found the whole process "Multicamera" a little long-winded. Am I missing something?

  Also on the same sequence I found unable to apply a fade to white transition both the screencast and the video of my head at the same time. Maybe I am not versed in the selections.

  Hello!

  He almost got it. First off you need not unlink the clips to isolate just the video or just audio. Don't forget to press ALT and then select the video and it will highlight only the video and not audio related.  Well, aside from that, you were very close... You see on the left side of the timeline, you have a box that says V1 and if you hover over the V1 on the right it says "track targeting...". "For the moment, you have targeted V1 track which is normal. That's fine, but your nested multicam clip is on track 2. If you can bring to the track #1 or deselect targeting for track 1 and select only the V2 to target 2 track and then the multicam window will appear as it should. So close. Happy editing!