On my next problem of data

Similar Questions

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Netflix in WMC «there was a problem of data recovery...» »

  I installed the latest round of updates (Ultimate) of Windows Vista and it apparently burst Netflix in WMC.  Now, I get the error:

  "There was a problem of data recovery. Make sure your internet connection is working and try again. »

  Internet works on the machine.  I reinstalled Silverlight (v4) and Netflix for WIndows Media Center.

  How to diagnose and repair the problem?

  Thank you!

  Keith...

  Sorry for the delay, but I've been busy (in my free time) trying to get this to work.

  I gave up trying to resuscitate MCE and installed a brand new Windows Vista Ultimate Edition with Service Pack 2.  After apply all WIndows patches and installation of Silverlight, I have the "Netflix" element in MCE.  He invites me to install, what I'm doing.  However, every time I start MCE and go to Netflix, he tells me to do reinstall - no login screen.

  I tried all the "mcupdate" article and then supported your steps above, but no go.

  I did this twice, so it wasn't just a fluke.  Apparently, the part of Netflix to MCE is not detect the plug-in that it installed.

  Any thoughts on what to do then?

  Thank you again...

  Keith...

  Later: I ran "mcupdate" after the steps you suggested, and now Netflix is gone again!

  Later: same problem on my other computer running MCE and Vista.  I don't want to mess up this computer so I left as what.

  Later: opening of a new post on problems become Netflix to work with a clean install.

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• ADE 2.0 and 4.0 do not work with Windows 10. The next problem is generated when you try to download a book from the public library.    Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The next problem is generated when you try to download a book from the public library.

  Error getting License Server Communication problem E_ADEPT_DOCUMENT_OPEN_ERROR.

  The work around works of Jean.  It would be nice if Adobe provided a real difficulty however.

  I have ADE installed 4.03.  The problem will occur as soon as that ADE is closed and reopened.    It takes so the patch every time allows you to download a book ADE.

  1. for Overdrive - select a book and click Download. -pop - up - select - Save file. - under the open with select - acsm_auto_file - download the file of social mobilization in your download directory.

  2. expand the Explorer open the file - go up to the OS (c)-

  -go to Program files (x 86) - enlarge

  -to enlarge Adobe

  -go to Adobe Digital Editions and the left click.

  -On the right part of the screen right click on Digitaleditions.exe.

  -Pop - up menu - on the left, click PROPERTIES

  -Pop up to select COMPATIBILITY

  -at the top of the menu compatibility, choose the resolution of compatibility issues run

  -Pop up to select the troubleshooting program

  -Pop up choose the program worked in earlier versions of windows, etc.

  -on the left, click NEXT

  -POP up - which version etc? Choose that I don't KNOW

  -on the left, click NEXT

  -POP - up - left click Test Program-

  -AT THE TOOL Avantek of window screen, a FLASHING ICON will appear - left-click on the icon - a pop-up will ask you if you want this program to change etc. On the left, click Yes.

  3. ADE open - make sure ADE is in library view.

  -Left click on FILE and then select Add to LIBRARY from the menu drop down.

  -POP UP - down to the right to choose the type of file of social mobilization

  -left side of the pop up to choose the directory where you downloaded the file of the CMHA.

  -Select the file of the CMHA in the right side of the window and on the left, click OPEN

  -It should work, but you have to go through the whole routine if you close ADE.

  I HOPE ADOBE will solve this problem. With each update of Windows 10 ADE seems crumbles a bit more.

• Calendar and the problems of data collection with the DAQ Assistant

  Hello NOR Developer area,

  I am a Novice of LabVIEW and have seen how helpful you all can be, and if I come to ask for your help.

  I'm having some trouble with a VI I built that specifies an input voltage, a SCB - 100 connected to a PCI-6031E and converts this tension in a temperature displayed on a waveform table. The goal is to give a constant reading of the temperature and display it in a chart for as long that the VI is running (and to reset the chart the next time the tracks of VI).

  The problems I've encountered currently are:

  -After a few minutes of the VI running, I get an error message 200279: tried to read samples that are no longer available. The requested sample was already available, but has since been replaced. (to the DAQ Assistant express VI).

  -I don't know how to change my chart so that the minimum value X is both during which the VI was launched and have the maximum X value increases with each iteration of the loop. Currently, I have the VI get the time system and contributing to the property node X scale. This worked for the graph of the voltage, but not for the temperature chart

  I appreciate those of you who took the time to read my post.

  Thank you all for your help.

  Sincerely,

  Ethan A. Klein

  SB candidate in Chemistry & Physics

  Massachusetts Institute of Technology

  Class of 2015

  PS I enclose my VI to give you a better understanding of my current situation.

  E A Klein wrote:

  Thanks for writing.

  What property node is talking?
  I do not understand that many different data types. How can I go on the treatment of all the data?

  (Did you mean I should wire 'blue' data for mathematical functions rather than using the node property tension?)

  Sincerely,

  In fact, one of the nodes property.  I mean specifically the tension property node.  But in reviewing, I noticed the other nodes in property for the chart.  Just set auto-scaling to the X scale and that should take care of two of the nodes property (right click on the graph, X scale-> AutoScale X Scale).  I also recommend placing your mathematical functions in a Subvi to make things easier to read.  Attached, that's what I think you're after.

  I hope that these small tweaks will speed things up enough to avoid your error.  If this isn't the case, then we should begin to look at the design of producer/consumer model or take readings at the same time.  It might also be worth looking away the DAQ Assistant and DAQmx real screws.  But one step at a time.

• EID Studio 3.1 double problem with data type in view

  I had a view work EID Studio 3.0 and it imported to the 3.1. The first thing I did was add the FROM clause, but I get validation errors. Questions (so far) seem to be defined as a mdex:double in my metadata fields. My definition of metadata for RESOURCE_QUANTITY is as follows:

  RESOURCE_QUANTITY, quantity,mdex:double, COMP, default

  The first question I have is in my WHERE clause:

  RESOURCE_QUANTITY <>0.0 OR RESOURCE_AMOUNT <>0.0

  gives the following error: a WHERE clause: can't compare mdex:double - set and mdex:double

  I have remove the WHERE clause for the moment and try to validate and get this matter in my SELECT clause:

  SELECT SUM (RESOURCE_QUANTITY) AS QuantitySum

  gives the following error: in the computer attribute 'QuantitySum': 'SUM' is not a valid library on types (mdex:double - set) function

  What is mdex:double - value and how this field get defined in this way?

  Hi Lily,

  I think we'll see a lot of variations on this issue in the next two weeks.  The attributes handling multiple assign has been totally redesigned OEID 3.1.  So, if you have an attribute that is listed as that can have multiple values, it is declared as a set of values (couble-set) rather than a single value (double)

  For example, if RESOURCE_QUANTITY is really unique-assign (and it is declared as multi - attribute by mistake), you can just reload the data via a base line to solve the problem.  If it is in fact several entitlement, you must tell the engine in your application, how to treat the different missions that may be present for each record.

  Hope that helps, I know a lot of people are going to get pop up by the present.

  Patrick Rafferty

  http://branchbird.com

• EA3: Problems of data Modeller

  If I open a data model produced under SQL Developer 3.2.2 SQL Developer 4 EA3 logic model has the attributes column PK shows however that they are not referred to as a PK and FK all attributes are missing.

  Thanks for reporting this.  We recently became aware of this problem, which occurs when the opening of the models in EA3 created using SQL Developer version 3 or version 3 Data Modeler.

  This should be corrected in the next version.

  When it is available, we recommend that you use the original definition of version 3 of your model, rather than any version may have registered with EA3.

• Help with the problem of data type...

  Hi friends,
  
  I have a requirement. I have a warrant 2 guests (from and to). The data contained in the guests are like "Fall 2006", "spring 2006", "full of 2006", "Academic 2006"for a given year. " I have data from the year 2000 to 2008. The data type of the column duration in varchar. I have a report corresponding to this prompt. This report works well if it is not linked with the guests. If I have this tie with guests, its giving me results because in the report I gave filter as term is greater than or equal to ' fisrt_pv "(où first_pv est la variable de présentation j'ai utilisé pour mon d'invite de terme... comme second_pv sage est pour à terme rapide) and the term is less than or equal to"second_pv"."» So, if I put my guest (and) fall 2007 and (spring 2008 to) and run the report, its sends a fall 2007, Full 2000... Full2008, spring 2000... Spring 2008. It is because it is comparing the term based on letter of departure with all the other term. We know that the fall 2007 and spring 2008 are next to next semesters, is expected to see just a 2-column output. How do oracle know that?
  
  I have a term_number associated with this table numbered 1 to the spring of 2000, 2 Full, 3 for autumn 2000 2000, 4 for academic 2000... all the way up to academic 2008. I used this area to the command prompt to order because I want the guest to show as the spring of 2000, Full 2000, fall 2000 etc. instead of 2000 academic, University 2001... hope this field will be useful for you to analyze... I need your help to do this... If you need other info let me know... Thanks for your time n help...
  
  Kind regards...

  Yes. The problem is that your guests are CHAR, so the calculation "superior to" is done alphabetically rather than numerically. This digital keys.

  Create two columns to contain the term_number that match the values selected in your guests. Then the BETWEEN operator do not filter on numeric values. You can still view the CHAR values in your report, but now they will be in the range that you would expect.

• connection problem of data with the support of mobistar (Belgium)

  WiFi works. Data connection isn't.

  The signal 'H' or 'E' is highlighted. I tried with the parameters of android and iphone Mobistar Belgium Web site and with all types of authentication. But it is impossible to connect.

  I will try with a sim card from another carrier and let you know.

  In the meantime, does anyone know if there are any specific APN settings for mobistar.be?

  Hi yellowtrolley,

  Thank you for reporting this issue. Please try the following to the APN settings I found on this site nd make sure your specific device supports the following frequencies:

  • GSM 900/1800 (2G GSM) net
  • W CDMA 2100 (3 G UMTS)

  The APN settings:

  • username: mobistar
  • password: mobistar
  • Name of the APN: web.pro.be

  You can also try this page if you need more specific parameters.

  Please let us know if this solves your problem, or if you have other questions about your Firefox OS device.

  Thank you!! =)

  -Ralph

• Problems sending data between the computer and the emulator.

  I can't send anything to the Calculator Emulator. Does not appear in the Send button calculator. In the emulator, it seems that send key as soon as I connect with the calculator and can send data to it. There is command of testicles that EU can do to make sure that a machine works, for example, the USB driver?

  In fact, including updates, firmware:

  application version: 20140702v6031

  operating system version: V 0.032.6030

  version of the program: 201472 (6031)

  most: the calculator, I received yesterday, day 1. and I doesn't seem to work well. There is a channel for guaranteed support, you can contact?

  Recognizing

  Davi

  Friends:

  Thank you very much. The problem has been resolved. As soon as I saw the kit, 3 updates were made and the machine works normally.

  Thank you

  Davi

• problem with date functions

  Hello

  I have a table with 2 columns. first column is the date and time. Second, this is my case.

  I want an auto-calcul, count the number of records I have today.

  What should I do? I tried the = countif ($A, today (()), does not work.

  help someone. million thanks
  

  You can do something like this:

  

  = COUNTIF (table 1::A, ' > = '& (today), table 1::A,' ')<>

  Today() gives the string date / time of the last midnight.  Today () + 1 gives at midnight tonight.  The COUNTIF counts all entries on or after last midnight and before the next midnight (which is the start of tomorrow).

  SG

• Satellite L850: Drive HARD Firmware problem prevent data recovery

  Am a little confused and need a simple explanation
  My HDD L850 died under warranty and was sent to the people of data recovery to recover the data before entering new drive under warranty.

  I am told that my hard drive has a fairly unique combination of firmware and the drive that prevents the recovery until they get this firmware. Now 6 weeks after it happened I stll wait.

  Someone in support could explain to me in simple terms, why this firmware is the problem cause and so far can only be obtained by your partner data recovery company?

  Hello

  I think that you will here get a correct answer, why the people of data recovery needs of these packages since it is a user forum.

  But to my knowledge all the 2.5 hard drives and SSD drive supports various firmware.
  These firmware tells the hardware how to interact with the operating system.

  It seems that people in data recovery needs these packages in order to get access to the HARD drive, and I presume, without the compatible firmware, it is not possible to recover the data.

• Problem writing data analog and entry of informed

  Hi, I created a labview program that acquires 3 analog inputs (2 current and 1 tension), encoder out of whack angle and 4 temporary sensors. The Analogue inputs record against lunatics of an engine angle, once the engine has reached the point dead high simulateously in a single file. In another temperature record since signals file they are a lower sampling rate. Both files at the same time record by using the structure of flat sequence to the duration of the pulse encoder TDC events. The program works well with simultaneous recording.

  However, I believe that in the file of analog inputs, the current readings are by crank angle but channel voltage readings are not. There a lot of zeroes inbetween pressure readings as if DAQ is not intervene for the tension. I can't understand why my program does that because the analog all the readings are in the same time of the sample and analog read the task.

  I tried a program separate labview using only express DAQ and have the same 3 channels and saves the data in a file of lvm - it works even at the same pace. I do not wish to use Express functions in my program since fast flow and writing, he will miss values due to the explicit functions opening and closing of files (explicit writable) and creating the same physical channel (in daq express).

  Please can someone help?

  I have attached my program and a sample file entry.

  Thank you very much

  Notay

  I think your problem is that you are indexing column 2 for voltage instead of rank 2. That's why you have only three elements in this table in the cluster.

• VI to measure FRF having a problem writing data

  Respected Sir / Mam,.

  I created a Vi to measure the signal in the modal analysis. The Vi is to give a very good signal, but the problem is in the writing of the data. The number of samples is given as 10K and rate is 100 k, but only 5 k datas, it writes to the file. The signals are good, but the registration of data is the problem. I have attached the VI. Your first answer will be very useful for my future work.

  thanking you

  RAM

  In fact, there is nothing wrong. You collect 10 k of temporal data. Spectral analysis that you perform it becomes 5 k of data in the frequency domain. It seems that everything is as it should be.

  Mike...