on the desktop computer administrator password

Similar Questions

• Remote assistance - unable to connect to the desktop computer using the remote connection

  Hello

  I'm currently running vista Professional 64 bits for portable and desktop computers.

  Problem:
  -I am not able to connect to the desktop computer by using the remote connection.

  Tried:
  -Setup the remote asstance for the Username (account login) designated
  -looked up the IP address
  -entering the IP then username and password
  Failed connection *.

  Little Question, too:
  -I run behind a router with 3 machines connected to the router, it would change my location from IP address? I think that's where I'm stuck at.

  The following article should you guide through the process and solve your problems:http://www.vistax64.com/tutorials/116361-remote-assistance.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• vdmadmin to assign the desktop computer?

  I'm giving entilements to a user in AD to access your desktop using the vdmadmin.exe command line interface.  I use VMware View Administrator 3.1.0 build-167577.

  Here is an example of what I am running and see:

  C:\Program View\Server\bin VMware & gt; vdmadmin.exe-L d DesktopVM u example.com\phife757 m Pool1

  Sucessfully assigned the machine specified user

  When I look at the web administration interface after the above command I don't see this user, such as the right to use the desktop computer.   Sign in using the customer discovers also fails.

  I received the command from this article: http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 100752

  So I guess my questions are, I use this command properly?  If this is not the case, how could do this using the command line?

  phife757 wrote:

  C:\Program VMware View\Server\bin > vdmadmin.exe-L d DesktopVM u example.com\phife757 m Pool1

  Sucessfully assigned the machine specified user

  So I guess my questions are, I use this command properly?  If this is not the case, how could do this using the command line?

  There is no option for vdmadmin command line allows users to a desktop computer, only for (UN) assign a VM specific to them within a pool of persistent. You must use the administrator user interface to set up rights to the office. recommendation of davesherman to manage rights for large pools of office using ad groups is a good way to go, you can then change the rights by changes to scripts in the group.

• How to stop firefox to shutoff valve of the desktop computer

  have not been able to stop the desktop computer, while in firefox there is no button on the keyboard

  Hi, I'm still not quite sure if I understand your question. However, the stop button is something that will always be handled by your operating system and is usually to be found within the user interface of your browser.

  http://Windows.Microsoft.com/en-us/Windows-8/how-shut-down-turn-off-PC

• Problems with the desktop computer, phone and Tablet Design

  Hi all

  As soon as I download my phone design that is all I get, phone design in each desktop browser, iphone and Tablet I, how do I MUSE use view PHIONE for phones, tablets for the Tables and VIEW of PHONE NOT ONLY in each device, a computer or a browser. -They only way I can see my design office is by removing the phone design.

  Any help appreciated.

  TX

  Hello

  I just check the site in my phone and the desktop computer. His office showing the desktop version and the version from phone to phone.

  Please clear the cache of your browser on the desktop browser and return to the site. If it's a windows machine, the shortest way is to press Ctrl + F5.

  Concerning

  Vivek

• Small blue square box flashing in the middle of the desktop computer

  Original title: I have a small blue square flashing in the middle of my monitor that holds a white lock inside and I can't get rid of him... any suggerstions?

  I have a 11/2 inch with a lock blue square white inside on my screen and I peut-not get rid of her, shows up at first upward and monitor stays on the computer so no matter where I go or what I do, any suggestions?

  Hi Frankie Barkere,

  1. did you of recent changes on the computer?

  2. don't see no message in the box square on the desktop?

  Method 1

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Method 2

  If the problem does not persist in safe mode then he isa possibility that some third-party programs installed on the computer is the origin of the problem in normal mode. I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP pavilion dv7 1245dx: what is the average of administrative password

  Turned on the computer laptop and says enter the administrative password. The screen is black with the blue box. Then took me to unlock screen password with 50743009 numbers. I tried to enter, but it did not work. I'm stuck please help? !!!

  Try to enter

  45621029

• WRT150N running on the desktop computer crashed

  I have a router that is running on a desktop computer that crashed. The router still works well with my wireless laptop. It is secure and I don't have the passkey. How can I put the software on a new computer without changing any parameters, so that I can connect a new laptop wireless?

  If you have not changed the ip address of the router when you have installed go ahead and open a browser and when you type the type of URL 192.168.1.1 and press ENTER. It should ask you username and password go ahead and enter. If you has not changed it when you built the cd, it should be by default and have no user name and password is admin. If your able to logg in you can modify all the information here the wep key routers and find also. To do this, you don't need to use the cd more and go through the process of it and you don't need to install it on another pc.

• If I downloaded photos on my iphone on my hard drive from the desktop computer, can I remove iphoto library without deleting them on the hard drive?

  I received the message that my iphone storage is almost full.  It is mainly from photos and videos.  I deleted the videos and have uploaded my photos on my hard drive of computer desk top of the page (which is a Dell non Apple products).  Can I now enter into the iphoto library and delete photos without losing those I downloaded on my desktop computer.  If so, how do I?  Thank you D

  iCloud is a synchronization system, not an external 'hard drive '. If you remove them on your device, they will remove icloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone/iPad storage. That will reduce the space required by 90% when it is fully effective.

• Unable to connect to on the XP computer administrator accounts

  Both my administrator account and the hidden admin account have been password protected. How can I get around this? Please? Windows XP Professional SP3
  I am not able to burn all the programs to use. My teacher said that I can use these forums to get a response, so here I am.

  All input will be greatly appreciated.
  * original title - hidden Admin/Admin password breaker? *

  ... My teacher said that I can use these forums to get a response, so here I am...

  Your Professor won't. It is not the purpose of these forums for coaching someone in how to circumvent or otherwise break administrative password. Administrative passwords are there for a reason and should be respected.

  Assuming that "burn all programs" does not mean "'software piracy ', ask the person who created the passwords to transmit them to you or give you sufficient permissions to achieve what you're trying." If this can be done for some reason, reinstalling Windows and set your own passwords.

• The menu icons and desktop start missing after the start of the desktop computer

  Original title: I do not see my bar of tasks or deskop

  When I start windows xp, I don't see the start menu or the desktop icons, only the desktop wallpaper. I was able to access the internet Explorer via windows Task Manager...

  Help me please! :))

  Hi Daannii,

  1. don't you make changes before the show?

  Try the following steps to start a process of the Windows Explorer and check the result.
  a. start your computer and boot to the desktop.
  b. press CTRL + ALT + DELETE, and then click Manager tasks.
  c. click on the file menu, click New task (run...).
  d. type % windir%\explorer.exe, and then click ok.
  e. restart the computer and check if the problem persists.

  For additional troubleshooting steps, see the following article: http://support.microsoft.com/kb/318027

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Select several icons to remove from the desktop computer

  On my desktop computer Windows XP, if I press and hold the Ctrl key so that I can select several icons that I want to drag to the trash, after choosing 3 or 4 it suddenly makes copies of all. I don't want that to happen. What I am doing wrong?

  You move the mouse slightly. This problem occurs usually because the hand is not quite as stable as you would like. You move the files/objects slightly when you drag and creating additional copies. Try lowering the sensitivity of your mouse in Control Panel > mouse applet.
  MS - MVP - Elephant Boy computers - don't panic!

• The mouse out of the desktop computer

  I have two monitors and when I unplug the other... any that the mouse on the main computer comes out of the screen on the desktop... Please help?  my mouse accelration is unstable because of this

  I have two monitors and when I unplug the other... any that the mouse on the main computer comes out of the screen on the desktop... Please help?  my mouse accelration is unstable because of this

  Hello

  When you remove one of the monitors, you must also disable the Extend option.

  Right click on the desktop, and then select the screen resolution.

  In multiple views of the drop-down menu, select the option to display the desktop than 1 (or 2 depending on the number of monitor in the upper part).

  Concerning

• Blinking cursor at the start of the desktop computer

  Original title: flashing - cursor does not match other scenarios that I read on

  When I turned on my desktop computer (Win 7) today, it started all the way to the office, but the cursor will not stop flickering. I can launch programs, but the cursor just keeps flickering. I rebooted and got the same results. All of the other answers I've found are where people are not able to boot at all. As I said, I can get all the way-just can't do not have the cursor moved! I checked my (optical) etc. of the mouse. The computer was fine when I stopped last Eve. It's just that when I started again today, and help the can't diidn restart. So, any ideas, anyone? Thank you very much!

  Hello. My mouse is a Logitech. Not sure of the model (I write from a location different than the House and can not ck at the mo). Nothing has changed re hardware/software. As mentioned, it was fine when I stopped, flicker when I rebooted. Have you tried again today and he is always wavering; so, we have two reboots since it began and no improvement. I'll try the other suggestions once housed. Will post back. THX.

• Unable to connect to the desktop computer running Windows 7 laptop running Windows 7, both in my home network, using remote desktop

  My desktop (host) is running Win7 Pro and my (client) laptop is running Win 7 Home Premium. For the office, I went to the control panel and allows remote connections. When I try to connect with the laptop in my same home network, I get an error message: Remote Desktop cannot connect to the remote computer you for one of the following reasons:

  (1) remote access to the server is not enabled

  (2) the remote computer is disabled

  (3) the remote computer is not available on the network

  Now, the computer is on and I can see what he listed as one of my computers on network. In fact, I accessed the command of remote desktop by right-clicking on the desktop in the list of networks and by selecting Remote Desktop in the menu dropdown.

  Obviously, I am missing something or something wrong. Please help me to understand.

  What do you call the remote [DRC] host desktop desktop machine, IE. local LAN IP static, the laptop?

  See this help as possible...

  http://theillustratednetwork.MVPs.org/RemoteDesktopTroubleshootingChecklist.html