On the laptop typing jumps on another line and continues the text on the line

Similar Questions

• Text jumps on another line when you type

  Text problems

  When I type, all I can do about that now and then the text jumps on another line making the unintelligible sentence. Is there.

  See... He did then. This is an example!

  "Hide pointer while typing" was already checked. I slowed down a little pointer, and so far, while I was typing this message I had no problem.

  Thanks a lot for your help
  Concerning
  John

• the cursor moves when you type on another line without any command to do so. Line never even

  When type any message in outlook or word or excel the cursor will move to another line anywhere in the message, never the same thing apparently not and of course you add letters to words, a line or it will even go to the signature block.  In this case no order for the cursor to move

  This usually happens on laptops by a sleeve or an arm moving above the small box that replaces a conventional mouse.  Most of these devices can have their reduced sensitivity, or you can search the ' net for one of the many utilities that turn them all in being key off the coast.

• Windows 8 cursor jumps in the existing text and continues to type here rather than the finish line that I am on, anyone else spotted the same thing?

  Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on.  Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part.  Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated.  Think there may be a loophole to WIN 8.  It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing?  Or is it just me?

  Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.

  Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from

  http://www.Synaptics.com/resources/drivers

  above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.

  Its such a relief to be able to settle this problem - THANK you

  Lets see if it sorts the problem MS Office too.

• hit the tab opens another line of address rather than go to the subject field

  With the last update to Thunderbird, I can not tab directly from the field address within the scope of the topic. Hit the tab opens another line of address to be removed, then tab will move to the scope of the topic. I hope someone solves this problem quickly.

  In my version 31.2.0
  It depends on how MANY fields are automatically inserted.

  So if I have 3 set as default, but have used an email address, tab scrolls the (two) other TO and in THE fields and then go to topic.

  The rest to THE fields may not necessarily appear if the content by separating the divider was raised to provide more space to strike. So it might appear as though the creation of a new FIELD (which is normally when you press the enter/return key), but it's actually only to already available in THE fields.

  To check this:
  Open a new message of Scripture.
  Lower the separator bar to reveal header space, all the fields to display and also a few extra empty lines.
  How many auto fields appear?

  Place the cursor at the top of the page to and use Tab to move.
  the move of the tab should move from FIELD to the fall of choice FOR down, then next field. When the last FIELD was used, tab should go to the question, it should not go to an empty field AND create a new FIELD.

• can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  can I move all functions to another monitor and still close the laptop without turning off the second monitor on a laptop

  You define 'Action close lid' to the 'status quo' instead of sleep or Shut down:
  Go to-> double click "Power Options" Control Panel-> 'Select a power plan' under your selected plan, click "Change plan settings"-> "Change plan", click on the blue link 'Change advanced power'-> in 'Advanced settings' tab expand "power buttons and lid"-> extend the action of the 'close' lid, set "on battery" and "Plugged in" to "Do nothing"-> click apply-> OK button

  Multiple monitors: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Set up multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Move windows between multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/move-Windows-between-multiple-monitors

  Understanding multiple monitors
  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

• How to draw a line (with the line segment tool) then draw another line, from those previous anchor point. When I try immediately draw another line on the other anchor lines it try to turn instead.

  I'm following a course of basic fundamental illustrator on Lynda. The video of "draw straight lines" is troubling me. They draw a line with the line segment and then draw another line coming out the anchor point at an angle.

  Here's where it is troubling me - when I try to drag a line to the anchor point trying to transform the first line, I drew. (the line cursor turns into a selection tool) I can't draw another line connecting the first.

  Advice would be great because it's driving crazy me.

  See you soon,.
  Kyle

  Yes, it is irritating. You must clear the previous line first. If you want to make sure that both ends are perfectly aligned, start by turning on the guides. If you want two lines to be part of the same way, you should use the tool pen instead.

• Hello, I have Lightroom and Photoshop CC on a mac and a PC laptop. I bought another mac now and no longer want to use the laptop PC (windows). What should I do to load them on the new mac? First remove the applications from the laptop?

  I have Lightroom and Photoshop CC on an imac and windows laptop PC. I've now bought another mac and want to use the laptop to windows. I need to remove the applications from the laptop first, then download new mac?

  Hello

  Lol you should not remove it. You can turn it off with the signing of the application Adobe CC.

  Reference: connect and disconnect activate Cloud Creative applications

  And then you can install it on your other machine.

  Kind regards

  Sheena

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• Question of Layer palette. I choose a layer and when I use move the tool on that layer PSCC jumps to another layer

  I use Photoshop CC 14.2.1x32. When I select a layer in the layers palette, then use the move tool to reposition an item on this layer PS force one jump to another layer. The only way I can put it back is by using free transform on the layer, I want to work. What happens with PS CC? Help, please. About to dump CC and return to the CS 6

  Uncheck the automatic selection in the move tool Options bar. That should do it.

• Click the "add another line" adv table must fill in the data in tbl.

  Hi all
  I have a requirement of value of column in table adavance automatically filling in read-only mode when the user clicks on the add another button in the row.
  
  Initially when the page loads there is no data and therefore no line in the table in advance. And advanced table will have the "add another line." When the user clicks this button, the first column of the table advance must complete with so-called values a contant '1'.
  
  
  Can someone please provide a code example in how to achieve this?
  
  
  Thank you
  Sunny

  Hi Sunny,

  Please use the controls below before creating and inserting the line so this new line will be created at the end.

  custVO1.last ();
  custVO1.next ();

  Thank you
  Agnes.

• Portege R500 - cursor often jump back a line or several spaces back

  I just bought a R500.
  When you type, the cursor jumps back a line often or several spaces back.
  It's an involuntary yip, and I don't think it's a human error of keyboard.

  How can I stop this? Any advice?

  Best regards, Ron

  Hello

  Disable the touchpad while typing. You can do that by pressing the Fn + F9 key combination.
  I had the same problem and it was caused by touching the surface of the touchpad while typing.

• Corrector "jumps", leave a line of brush size circles instead of a smooth line

  When I use the healing brush is tends to "jump".  He leaves a line of circles as would a stamp instead of a fluid line as it should leave.  No matter how slow, I pass the brush it leaves a circle and then as I continue to draw, nothing happens until I reached the edge of the first circle, then it drops another circle and he keeps going as long as I draw with him.   The Brush tool works fine, leave a line smooth.  Spot Healing and patch tool work very well, but the Healing Brush tool will heal in a smooth contour.  It ignores along a leaves a tail of the circles the size of the brush.  I use a fast computer, i7, 16bg of ram processor and a SOLID-STATE drive, so I don't think not speed is an issue.  I've updated since CS4 where the Healing Brush tool worked well on this computer

  I would try to reset the correction tool by right-clicking on the healing brush icon in the toolbar options and choose Reset tool:

  

• What happens when a number of blocked calls a person and they're on another line?

  What happens when a number of blocked calls the person and they're on another line? Does go directly to voicemail, or ring several times to voice mail?

  If "on the other line" means on another call and call waiting is activated, the blocked call goes straight to voicemail.

• How to copy the numbers in a cell to another cell and gets their total

  500.40

  192932.90

  231838 * 90

  290414 * 15

  222312 * 15

  222314 * 5

  141722 * 20

  Hello, can I ask how to copy the numbers after the period/asterisk to another cell and then add up all the numbers copied without having to type them.thank you

  Hi mirijin,

  

  Break the problem into small steps:

  Step 1. All separators (periods and asterisks) convert the asterisks.

  Formula in B2 (fill down)

  = SUBSTITUTE(A2,".","*")

  Step 2. Find the position of an asterisk in each cell.

  Formula in C2 (fill down)

  = FIND("*",B2)

  Step 3. Extract everything to the right of the asterisk.

  Formula in D2 (fill down)

  = RIGHT (B2, LEN (B2) −C2)

  Step 4. Convert the text to numbers re using the VALUE function.

  Formula in E2 (fill down)

  VALUE = (D2)

  This table has a header row and footer of the line, so the SUM in E9 apply to all cells in the body.

  = SUM (E)

  You can combine the individual forms in a unique and complex formula, or simply to hide intermediate columns B, C and D:

  

  Kind regards

  Ian.