on the set of paths, select anchor points and move the handles at the same time

Similar Questions

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• How can I move two anchor points overlapping of distinct objects at the same time?

  Please refer to the picture for clarification:

  Pink and blue objects in the image are distinct forms that have the same number of vertices/inkings. The forms have been generated with ArcGIS and exported to a. File to HAVE it. I need to move the anchor points of these two forms, so that they create a trail that follows the outline of the layer of the topography, but it seems that I can only move the anchor of a shape at the same time. Is there a way to pass the two anchors both (anchors that overlap, one of each shape)?

  I should also add and subtract some of the anchor so while making it so each anchor is not a 'corner '.

  I want to essentially merge or merge the anchor points of the two forms while maintaining the two colors, so that they share a border.

  Any help will be a life saver! I can try to clarify if it is not supposed. Thanks in advance!

  -Jake

  Jake,

  You can click on selection of object through only in preferences, then after the first deselect all ClickDrag (click outside paths) with the tool directly on each game Selection and then ClickDrag to move (you can simply go to set).

• Too many anchor points and simplify the mess to the top of the photo

  I take a picture and I have a problem - I need a maximum of 2000 anchor points, and I have about 11 k.

  Looks like I have a lot of useless points, but when I try to simplify the image gets all messed. Another way to solve this problem?

  Here is a part of the image, we see that many of the points do not have to be there...

  

  Lars Jørgen,

  Whatever the version, you should be able to:

  (1) select a red path and select > same > fill color,.

  (2) pathfinder > unit/add to shape area (you may need to press Alt/Option to get simple traces if yes, you will get a warning about it);

  (3) separate if you wish.

  Who should group all sets of overlapping paths of this color in unique paths, some of which may be composed of paths, with all the unnecessary layers and their Anchor Points removed.

  Edit: If you use British English in the first sentence, you can spell it without getting caught by the filter of the nanny.

• HELP - strange behavior rounded Rectangle - cannot select Anchor Points

  Good day to you all, I hope someone can help out me.

  I have a strange problem with my Illustrator CS3.

  I worked on an illustration for hours without any problem and the graphics requires me to do a lot of "buttons". I used the rectangular shape with AESTHETIC tool > > button CORNERS ROUNDED to create different forms without any problem whatsoever.

  All of a sudden (without close AICS3), all my NEWLY CREATED rectangles behave strangely.

  None of my new rectangles allowed me to individually select anchor points. As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  When I choose the direct Selection (white arrow) tool, I can not select on the path itself and only the limit is displayed (with corner WHITE, no black points). Adjust this flat bounding box / distorts my rectangle, while the scales of adjustment with the black arrow rectangle. I can't use the scissors tool either. I can't add/remove is a path with the pen tool.

  I can't select individual anchor points.

  All of the 'old' generated rectangles are fine, I can select each path and anchor individually, but all rectangles later do not allow me to do.

  To add to the confusion, this only happens with rectangles. As you can see with the picture below. I can create any simple or complex form/paths, and I can choose individual anchors with no problems. Can I use the tool scissors without any problem or even the tool pen to add/remove a path to all other forms BUT the rectangle with corners rounded...

  

  Only the rounded rectangle tool shows the anchor 'blue '. Note that all four forms have been selected with the direct Selection (white arrow) tool. If I used the black arrow, then the selection should have been outside of the black lines of the rounded rectangle.

  What is going on? I deleted the AIPrefs, it isn't CTRL-H, I am really confused...

  Help, please. Thank you very much

  Dave

  As you know, when you create a rounded rectangle, you'll find yourself with 8 points (2 per corner) compared with 4 anchor points in a normal rectangle. In this case, all of my new rounded rectangles show only 4 points.

  Yes, as it should be. Rounded corners is an effect and unrelated to the native rounded rectangle tool. In order for the paths, the effect should be expanded using the object--> Expand.

  Mylenium

• Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  Why Illustrator change my anchor points and size race randomly when I'm using the tool pen?

  k,

  It looks like you might be haunted by the Align attribute to the ghost of the pixel grid.

  You can select the entire document and untick finally align on the pixel grid in the Transform palette and uncheck also align new objects to the pixel grid in the options of the Launcher. It is crucial that the checkbox is disabled completely, not just a - which also count as ticked.

  It may be noted that even align with the pixel grid is cleared with all the selected objects, align new objects to the pixel grid is checked as the creation of new objects will result in these new objects being aligned, even when they are created from existing objects that can happen with Pathfinder operations.

  You can avoid the types of documents with the default (RGB for the web and other) or change the default value for such documents.

  Here is a screenshot of exquisite made per ton in the first post:

  https://forums.Adobe.com/message/7841770#7841770

• Setting of two sleeves of an anchor at the same time?

  Hello

  Is it possible to adjust the two handles of an anchor point at the same time?
  
  I want to change the top of this form of egg shape so that it is symmetrical on both sides when I adjust it.
  What is the best way to achieve this?

  Thank you!

  jaygoo,

  For the simple fact of drag, you can:

  1) select directly the anchor;

  (2) ShiftClick the two handles;

  3 switch) to the scale tool and the ClickDrag in the face of non more.

• Moving anchor points and the whole shape gets distorted to change the line weight

  I have a fairly simple drawing that I drew in a larger size, so I could be more specific with it, and now I want to reduce up to the finished size and thicken the line, but when I make the line thicker, my anchor points are moving and the whole drawing is distorted.

  Using Adobe Illustrator of 24 years, I never saw that happen. When I click on the "up" arrow in the stroke palette a lot of time to gradually increase the thickness of line, I can watch made anchor 'walk' around like my shape gets distorted.

  If I go to the place a numeric value for the thickness of line, it doesn't.

  However, if I use the scale tool to shrink the design down to the size of 10% or 20%, or whatever, with traits of the scale and effects UNCHECKED, yet once, move the anchor points and the drawing is distorted.

  It's all about a brand new installation of Illustrator CS 6 for Mac (although I use CS 6 for about 2 years now, my hardrive crashed this past weekend and I had to reinstall everything).

  I missed a little box somewhere that I never saw elsewhere that is what actually happen?

  This post editing to add:

  Also, some of these objects in my drawing I cannot change the race less than 1 point thickness. If I choisis.5 ou.25 pt in the context menu, or even if I enter the numeric value, it jumps to 1 point. Other objects in the drawing are not.

  These objects in question are "rounded rectangle" forms I used the scissors tools to cut and then used the "join" command to put them as well as other forms that have been "scissored"as well."

  All forms of "Ellipse" and "Rounded Rectangle" that I have left intact do not exhibit this problem with stroke and distortion.

  You are being bitten by the Align-to - pixel grid. Select the entire document and go to the transformation Panel and turn off snap to Pixel - grid at the bottom of the Panel. Then go into the rollout (small triangle in the upper-right) and disable align objects on the pixel grid.

• On adobe Illustrator, how could I sellect a selection of layers and move to the top of the tab layers everything always now on layers selcted, other than to scroll to the top?

  On adobe Illustrator, how could I sellect a selection of layers and move to the top of the tab layers everything always maintaining on the selcted layers in a sub-folder already done, other than to scroll upwards and gout? As it takes long time, if there are a few hundreds layers. Shortcut keys / setting?

  I'm afraid, is not a feature in artificial intelligence. [PS it would be Shift-Cmd / Ctrl +] or [.]

  Add as a feature here request: Illustrator feature request/Bug Report Form

• Is there a way to set reminders for multiple documents at the same time?

  Is there a way to set reminders for multiple documents at the same time? Now he must go through a list, manually click through a series of options, then select it. If I send more than 300 different documents to individuals at a time, it becomes tedious. Quick. A way to save me the trouble would be so so so appreciated.

  Hello Lindsayb123,

  We do have an option to set a generic reminder under choice of account in the accounts of the company and can be set by going to the tab account-> account settings-> send parameters and set reminders.

  Let me know if you need more information.

  -Usman

• How can I animate various mouse Tracker points at the same time during a recording?

  Hey,.

  I'm trying to animate my character so that his left arm cross out his right elbow, and then the fear character and she jumps on the side. I can't animate the arms at the same time in a single record. How can I animate various mouse Tracker points at the same time?

  Playing right now I seem to be only able to animate a point Tracker of mouse at the same time (i.e. his right arm) and when I return to 're-save' so I can animated left arm, right arm recording is saved on and now only point left mouse Tracker.

  Hope that makes sense, let me know if you need me to develop. Thank you.

  Currently, you'll want to separate Tracker mouse behaviors for each hand. Select the puppet in the project Panel, and then add the second behavior mouse Tracker via the add behavior button ("+") in the properties panel. Then, during recording, make sure to disarm one of them so that other behaviors can control the hand that you drag. We are studying ways to improve this workflow for future versions overview.

• In Acrobat XI, how can I select and move multiple blocks of text/image at the same time on the same page?

  I work with PDF files generated by student requiring all content in a specific range of margin. Occasional tables and figures are indented or otherwise properly spaced so that the content violates the margin requirement. In Acrobat X, I could use the selection tool to draw a selection rectangle around all text and lines of a table for example and just drag the entire table over a little to meet the requirements without referring the PDF to the author for correction. It did not always work, but quite often that I was able to use it on a daily basis.

  Is it possible to select several (but not ALL) blocks of text and image on a page pieces, so they may be submitted at the same time? If I have to select each text block and lines (or each point and in a chart) and move them each individually, it's going to be a nightmare.

  I have Acrobat XI for Mac and Windows, but tend to use the version of Windows more often.
  

  People have reported what happens when preview of the output (I think) window is open. So you can close.  have not heard of another fix

• Is it possible to scan multiple machines at the same time, only not by selecting a whole folder?

  Lets say I have a folder named "Windows" and there I have 100 virtual machines.  I don't want to scan (and so install the scanning agent) on all these machines, but rather I want to scan 20 machines.  I have not found a way to select the 20 machines (for example, by using the CTRL key to highlight) and scan them at the same time or create a scheduled task for this either.  Select 'CTRL' seems to work, but then when start you the scan, it only works on the first selected virtual machine and other virtual machines that have been selected are ignored.

  It seems that I can scan only the level of the entire folder or individual machines (one at a time).  Is this correct, or am I missing something to allow me to do?

  Thank you

  SB

  The files are simply an artificial grouping of vm.  From a functional point of view, there is no difference between leading vm in a temporary folder and selecting vm with something like ctrl + enter to target action.  Create your folder, drag the virtual machine, that you want to scan in the scanner, then drag regularize them and delete the folder.  The politicians in office will be never the wiser

  GE

• How to transform a layer object and a path at the same time?

  Hi all

  I know that I will start when you tell me the answer to this!

  I would really like to know if there is a way I can manage to transform a layer object and a path at the same time... or if there is no work around to get there.

  In a Word, for example I spend a VERY long time to create a drive complex around a very detailed object and then at the end note to what twisted and perspective, and would like to straighten.

  Of course I could turn and correct the object and then carefully turn the path - but it will not correct and I have to spend a lot of time the path of adjustment and make SURE, it is perfect.

  Are there not somehow, I was able to transform set?

  Usually, of course, I do all the correction to straighten and correct the perspective in advance, but in some cases after I am done creating the path I then notice that image could have used other adjustments.

  I appreciate all the advice you can get :)

  Thank you kindly,

  Christine

  Transform the layer and then target the way and make "Edit > Transform path > Again. If you make several changes on the layer, and then each time that validate you and leave transformation mode, remember to do the ' transform path > Again "to keep the layer and the synchronized pathname.

• Is possible to set a user by default POV to all users at the same time?

  Hello world...
  
  I develop a report with the financial report and I want to set a default value for a dimension in the POV for all users. Because when I set a POV on my report it apply only to the user that I use for preparing the report. Other users connect to this report, it sets a default value of values other than the values that I have set myself. I tried to use a form of POV. It applies to the POV, I'm set for all users, but I am able to work with a grid at the same time.
  
  PS: Sorry if I wasn't clear enough!
  
  Kind regards
  Rafael Melo - Brazil

  Hi Rafael

  The ManageUserPov.properties will only fix the POV for one or more users at a specific point in time. As soon as a user opens a report and changes of this POV, then it is lost.

  I know what you're trying to do, but I don't think that there is a way to apply the kind of logic that you hope.

  There is a way of (or certainly used to be a way of) hardcode the POV in the report URL. I am sure that this worked when prior workspace Hyperion financial reports used to have its own web client. It's thinking is the basis of the road that linked the statement of work, that's why I suggested that you look at. You could try to find a way to open the report by substituting the POV by using this hard-coding in the URL or go with my original plan of hard coding a "landing page" type report with your default POV and then use reports related to take the user following a report in which they can change the POV as they wish.

  Hope this helps
  Stuart