On the use of PIVOT problem

Similar Questions

• Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family

  Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.

  These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.

  Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu

  

  > options > advanced > General.

• I have problems with of the Subvi after the use of customized device model

  I used to start my machine personalized customized device model and I got success in the deployment until I started to do more complicated the Subvi.   I am currently trying to convert low FPGA and high ticks to the duty cycle, but for some reason when I add it to the RT VI "Data read of HW" driver, it seems to cause a downtime... ideas? Is a circuit agree? I have added a time delay but I am still having problems. It is a device online, so I'm suspicious of it hogging resources, but am not sure.

  Attached images are meant to be read like this:

  1. the case of the RT pilot ReadDataFromHW

  2. it's the Subvi calling ToDutyCycle SIMStimPWMSubVI

  3 ShiftRegister.PNG is inside the Subvi.

  As a robotician I celebrate early and often (usually by a failure or two...), but it seems that the answer was to transform fundamentally the While loop for a loop with a count of 1 and then remove the additional elements to ensure that each shift register has that one and then right click on the shift registers and convert at the Feedback node...
  I was able to deploy to VeriStand as a custom device and it runs and calculates the factor of use with no problems. WOOHOO! Where - what is celebrate button!

• When I try to use the Skype window having problem

  When I try to use the Skype window having problem

  Hello

  you don't say what problem?

  and if the problem only occurs when using Skype, ask the Support of Skype

  https://support.Skype.com/en/

• Problem with no audio on the use of the Webcam.

  My webcam has no audio, any ideas what the problem may be?

  Hello

  Please answer these questions to get more clarity on this issue.

  -Don't you make changes to the computer before this problem?

  -Is the specific issue of webcam?

  This problem may occur because of software or hardware issues. This problem may also occur due to corrupted drivers or broken and missing updates.

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

  No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  You can also try using a different application with webcam and check if there is sound on this request.

  Response with the State of the question and we will be happy to offer you our help.

• Windows 7 of fingerprints of connection problem, error ' year error occurred preventing the use of your information for fingerprint identification.

  Original title: wndows 7 fingerprint logon

  I like to use fingerprints for better security authentication when logging a session Windows or unlock. I can create a long, highly secure password and do not have to type it every time I have lock Windows. BUT...

  A week or two ago, the sensors of validity fingerprint reader on my HP Pavilion dv7 stopped working. I reinstalled the latest driver from HP support device, and everything worked fine for a day or two. Now the sensor still works, but Windows (7, home edition, SP1) gives me the message "year error occurred preventing the use of your fingerprint credentials." The only thing that has changed, I know, is the latest Windows updates.

  Can anyone help? Thank you!

  Hi Frank,.

  Thanks for the reply.

  I suggest you to refer to the article and check if it helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03061709

  If the problem persists, I suggest you send the request in Support HP for assistance.

  http://h30434.www3.HP.com/

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  I am facing problem in the use of applications of windows8. I am not able to use even a single App. What shoulg do. ?

  Hi Shubham,

  You receive an error message when you try to use the Apps in Windows 8?

  Exactly how have you connected to the computer (Microsoft Account or Local account)?

  follow these steps to solve the app suggested you nuisance.

  Method 1:

  Run applications troubleshooting

  I suggest you to download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2:

  I suggest you follow the steps in the article. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  Method 3:

  I suggest that you check the proxy settings because if you use the Proxy Server, then the Apps in Windows 8 will not work.

   

  a. click on thegear box in the upper right corner in Internet Explorer.

  b. click onTools and then click Internet Options.

  c. click on theConnections tab, and then click LAN settings.

  d. Uncheckuse a proxy server for your LAN .

  e. clickOk.

  Hope the helps of information provided.

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• Edit PDFS using the Photoshop file size problem

  Hello

  Don't know if this should go in the forum of Acrobat or Photoshop forum because it uses both.

  Steps to reproduce the problem:

  1. Open a PDF file in Adobe Acrobat format. PDF files, I work with that are mainly analyses, so that they are just an image with a text of OCRB.
  2. Tools-> Edit PDF.
  3. Right-click on a page, change using Adobe Photoshop
  4. In Photoshop, make changes, which is not serious.
  5. Save the temporary file and close Photoshop.
  6. Save the PDF in Acrobat

  At this stage the balloons PDF in many, many times its original size. The test that I have went from 300 KB to 6 400 KB. I can then go and optimize the PDF file to bring it down, but we are trying to optimize a workflow. Auditing of the use of the space has the same percentages allocated to each category as before. The number of pixels is not changed, the bit rate has not changed...

  I fiddled with the Adobe PDF presets with no luck - in fact, I can't yet figure out how, in this workflow, to use a particular preset, because in order to make the Photoshop automatically propagate changes to the PDF, I can save only, not to save under...

  How can I avoid this problem? I'm on a PC using Photoshop CC 2015.1.2 and Acrobat Pro DC 2015. Thanks for your help!

  Matthew

  Step 6 is it save or save as?

• Can two people use Cloud applications simultaneously with the same subscription without problem? [was: Hello, my question is...]

  Buy the package "all applications" can two people use aplicacioes at the same time without problems?

  NO.

  The OWNER can activate on 2 computers but use only on one at a time

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations may NOT be used at the same time (noted in the link above of the license)

• Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

  In proxy environment, the computer cannot connect to the Adobe servers, so it does not work. The proxy or the firewall should be disabled if you use creative cloud.

  Hope this will help you.

  Kind regards

  Hervé Khare

• Hello, how can the form in Adobe Muse run on a third-party hosting site?  MANDIC use the server to host the site. More the form of error. I couldn't find the solution to this problem.

  Hello, how can the form in Adobe Muse run on a third-party hosting site? MANDIC use the server to host the site. More the form of error. I couldn't find the solution to this problem.

  Please see this document for troubleshooting:

  https://forums.Adobe.com/docs/doc-3581

  Thank you

  Sanjit

• Problem with the use of the lightbox in combination with buttons on the Master slide

  I want to use one have a Walker of popup layer (with content), the user clicks a button on the slide.  The user can close with a button which also appears Walker that the lightbox appears.

  The lightbox layer covers the complete breech the user should click the button close before the next slide can be visited. Everything works fine

  Problem:

  Then I used and prevoious buttons on the slide master and although the layer seems to be on the top of the next and previous buttons, they stil working.

  How can I prevent the buttons on the master slide to work Walker watch the light table?

  Vico

  Each interactive object remains active even if it is covered by a non-interactive object.

  More information on the use of the shape of the buttons, either model of slides or time during the rest of the project: http://blog.lilybiri.com/why-i-like-shape-buttons-captivate-6

  ATTENTION: during time during the rest of the project, to make visible everywhere normally you put on top. But in this case, which means they'll be on top of the viewers. I did pass on the viewers once, maybe I should write in a blog.

  Lilybiri

• The use of actionScript to speed up the video clip causes weird problems

  I use the script below to expedite a movieclip
  
  onClipEvent (load) {}
  NF = Function (); {
  nextFrame();
  }
  setInterval (NF, 1000/fps);
  }
  
  Well, a button inside the movie clip is linked to an another movieclip "parent". When the button is clicked above through the ignorant parent movieclip her stops at a pace fast enough speeds until she runs into the image tag where this clip accelerates resides in the parent movie clip, then it stops and returns to normal.
  
  Does anyone know how to avoid this problem? I know it works because there are other 3 buttons that work like a charm without accelerates using the above script.
  
  Or does anyone know another way to speed up the movieclip outside the use of the script above?
  
  Any help would be greatly appreciated, thanks in advance!

  Yuri = setInterval (f, t) starts a loop. He repeatedly calls the function f() every milliseconds t up to what a clearInterval (Yuri) is executed.

  the most common problem that occurs with setInterval() runs twice (or more) with no intermediary clearInterval(). When that happens all hell breaks loose and the swf will call the function much more quickly than expected and can not be stopped (easily) little matter how clearInterval() statements you try and run.

  to avoid this problem, the simplest method is to run a clearInterval() just BEFORE all the statements of setInterval(). It does not hurt anything (try and) clear and interval that does not exist and sometimes he'll stop the seemingly weird problems that occur with intervals of out of control:

  clearInterval (Yuri);
  Yuri = setInterval (f, t);

• "No cell coverage" not listed in the use of the battery

  During the audit of the use of the battery parameters, on an iPad 2 Air, WiFi and cellular, upgrade 10.0.2, 'No cell coverage' is listed and uses a lot of battery percentage. This never happened since the purchase of the iPad two years ago. I've recently updated to iOS 10.0.2 and T-Mobile as the cellular carrier. This occurs when the two Wi - Fi AND cellular data are turned off. I barely use the cell service as it is, first of all just use wifi, and I never leave the cellular data connection on when you do not. I noticed a few days ago a T-Mobile "Carrier Update" has been pushed to the iPad. Someone else with the same situation?

  Hi there, stumped127! Thank you for using communities of support from Apple!

  Use of your iPad 2 Air indicates that it is looking for service even if you have data Wi - Fi and cell phone turned off after update to iOS 10.0.2. Given that mobile data is off, it shouldn't have an impact on the battery and I will be happy to help you with this. Be sure to test after each numbered step.

  How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a fresh backup. It is preferable "to have" one to the 'need' to a backup.

  1. forcing a nearby app on your iPhone, iPad or iPod touch - first, quit all running applications, and then restart your iPhone, iPad or iPod touch - never underestimate the power of a good restart.

  2. reset the iPad settings - do not forget to write your networks, Wi-Fi/passwords before you start. On your iPad, go to settings > general > reset > reset all settings. This step returns your iPad to factory default settings. Test and if that solves the problem, use your backup to restore your settings.

  Take care!