On the VSAN architecture in production environment

Similar Questions

• How to deploy my portal to the production environment

  Hi all
  
  I use the ASDK developed an access portal, my question is how to deploy my portal to the production environment? You must also install the ASDK in a production environment? Or just install the package of execution?
  
  Thank you
  Alan.H

  Hello Alan,.

  Is this an application ASDK 10 g or 11g? In both cases, the answer is really the same thing: do not install the ASDK in the production environment, but for 11g it's much easier to do.

  Kind regards
  Colin

• Error 401 during the passage of the assessment of the production environment

  Hello

  We recently moved our application for assessment of the production environment by using the credentials provided by the Push of BB Services, only to find out that we receive an "HTTP 401 - PushServiceId/password status invalid in the authorization HTTP header" whenever we try to send a push notification.

  We do not have change our code (which works very well using assessment data) at all except for his replacement by credentials. We use the URL https://cpxxx.pushapi.na.blackberry.com/mss/PD_pushRequest to send our push notifications, where xxx is the CPID provided by BlackBerry, and we're certainly using the password for the initiator to push (instead of the password for the portal content provider).

  Needless to say that we are base64 encoding app id and the password in the header, and as I said if switch back us to the environment assessment (change credentials), everything works fine.

  This becomes a problem, I would appreciate help if someone was faced with a similar problem.

  That's all. He works with the new credentials.

  Thank you.

• Isolate the production environment servers in a test environment

  I would like to create a clone of my production SQL and Sharepoint server environment and isolate the servers from the rest of the environment. What I want to do is to create a new volume on my SAN and clone the two servers to it. After that, I want to always allow access to a consultant in order to access servers remotely while not allowing the rest of the production environment to see the servers. Is there an easy way to configure this?

  You can work with NAT.

  Add a virtual machine acting as a NAT and gateway in this "isolated" network

  Or, simpler, add a server or a client with a dual NIC, an isolated network and the other in the local network.

  André

• How to use the command import on the production environment?

  Hi gurus of the OFA.
  
  I want to know about the production environment OAF and development environment, the differences between them and how to use the command import on the production environment?
  
  
  
  Concerning
  
  Ajay Sharma
  

• Migration of the repository of security in a Production environment

  Hi, I use jdev11g and I'm trying to deploy and app with authentication and authorization of weblogic 10 gr 3, I'm looking at the "migration of the repository of security in a Production environment" section an i do not find these settings and other parts of this section: "
  
  fromCredStore the name of the identifying information from the source store service instance listed in the entrance to jps-default context (identified by the name of your application)
  fromPolicyStore the name of the source store service instance listed in the entrance to jps-default context (identified by the name of your application)
  srcFolderLocation the path to the file local cwallet.sso
  destFolderLocation the path to the target cwallet.sso file
  srcFolderLocation the path to the file local jazn-"Data.xml"
  destFolderLocation the path to the target system-jazn-"Data.xml" file
  
  I have no problem deployment of authentication only, the problem is when I use the option "authentication and authorization" for security, I can't log in to any user that I have defined, as the error page, I set you only identical to the login page and it returns me to the page of connection/error all the time connect with any user I defined.
  I wonder is there any link or video with an example of this, cause there seems little complex, thanks in advance.
  
  Published by: Julio IP on November 10, 2008 15:37

  Hello

  Please report to us. In fact, we are developing a tutorial Oracle for example covering the safety of the ADF. There is no video or other of the documentation

  Frank

• vSan on home test environment

  Hello

  Does anyone know if vSAN requires special hardware? I have 3 guests in my home test, with processors AMD FX and MSI mainborads. I understand that vSAN requires flash drives, one on each host at least, but before you buy, I want to know if vSAN requires special hardware. I don't think he does, but some comments from someone who has tested is very appreciated. Thank you!

  I guess the answer is Yes, it requires a special material commodities.  In a production environment, you should stick to the VMware HCL, who moved to prepared knots instead of individual pieces.

  For a test environment to home and want only to test the functionality, you can either fake a spinning HD SSD or nested ESXi.  Check Cormac, Duncan, and Lam for how to do this.  Thank you, Zach.

• Best practices for the design of a printing environment?

  Greetings,

  If there is a better place for this, please let me know.

  Objective:

  Redesign and redeploy my printing environment with best practices in mind.

  
  

  Overview: VMWare environment running 2008 R2, with about 200 printers. I have a majority of printers HP ranging from 10 years old again. LaserJet MFP, OfficeJets, etc... etc... In addition to the copiers Konica, Xerox and Savin. Many of our models of printer are not taken in charge in 2008, and still less x 64.

  Our future goals include services eprint, as well as the desire to manage the print quality, and levels of consumition by something like Web Jetadmin.

  Currently we have a 2003 Server x 86 server running our printers very old and 6 months ago the rest on a single x 64 server 2008r2. We ended up not giving it the attention to detail, it is necessary and pilots have become very congested, this led to a PCL6 only, UPD update that ended up corrupting several drivers through the UPD PCL 5 and 6 of the spectrum. At this time, we brought a second server 2008r2 and began to emigrate to those affected. In some cases, we were forced to remove manually the drivers off the customer system32-> coil-> driver and reinstall.

  I've not had much luck finding good best practice information and thought I'd ask. Some documents I came across suggested that I should isolate a universal driver to a single server, such as 3 servers for PCL5, PCL6, and Psalm then, there is the need to deal with my various copiers.

  I appreciate your advice, thank you!

  This forum focuses on the level of consumer products.  For your question you can have the best results in the forum HP Enterprise here.

• ORDS3.0EA can be used in a production environment

  Hello:

  I had planned to launch a project to deploy a Web service with ADR 2.0 and probably with Apex.

  But now ORDS3.0 EA was released. I can deploy without apex, and it has a function to simply deploy webservice.

  So now I need to decide whether to use ORDS2.0 or 3.0 in my project.

  EA can be used in a production environment? Can the project to have a month or two for the kickoff, if I have a question in the EA version, I raise a SR on EA version?

  Please consult the readme.html in the distribution, as he says it, EA builds are NOT supported for production use

• BIEE 11 g, how could I Stéphane newspaper in a new production environment page?

  I want to Stéphane, the login page in the environment from development to a production environment,

  any suggestions?

  You need to work on the location of \FMW\Oracle_BI1\bifoundation\web\msgdb\pages\common\signin.html and page signin.html

  Copy of files like regular might work

  ~ http://cool-bi.com

• Set up a pre-production environment...

  My current employer has a pre-production environment that is being updated nightly from the production. I started to look at how it is done (powerCLI script) and I'm trying to make things better.

  Here's how it works.

  A snapshot is taken of production servers, which 'freeze' the base vmdk disk. A new virtual machine is created for pre-production and it uses the 'frozen' drive to the production server database, because it is not persistent mode, clean disc. Of course, the virtual machine is connected to a group of isolated ports. Basically, this allows the team dev/infra to have an identical copy of the production servers anytime (just run the refresh script).

  While this works very well, I have a problem on using disks of production for this purpose. Usually, I prefer to leave only one production and complete clones have either fully provisioned pre-production environment.

  Suppose I'm onboard with happens like that and I want to automate the creation of these reservoirs of pre-production. Right now they are built manually to the new servers, and then the refresh script.

  Refresh the script:

  (A) pre-production shutdown server

  (B) remove the snapshot on the production server (committing the latest changes to the base vmdk)

  (C) create new snapshot to the production server (freeze the base vmdk)

  (D) Power Server pre-production (with validated changes)

  
  This script is scheduled every night to start the next day with a cool environment. Another advantage of this approach that is not persistent, it is that a simple reboot brings the pre-production back to a clean version (if tests are not doing well).

  Issues related to the:

  Is there a way to clone a virtual machine without the disc? This would make the easy creation of new servers in pre-production. Clone, log drives, change the port group. Fact.

  Is there a better way to achieve that kind of result without this kind of 'false linked clones?

  The following seems to work for me. A few notes:

  • The virtual machine is cloned without any of its VMDK
  • The new virtual machine is created on the same node of ESXi and store data as a source of VM (since you don't seem to have special requirements in this aspect)
  • This script does not work for a virtual computer with RDM disks

  $vmName = "sourceVM".

  $vmClone = "cloneVM".

  $folderName = "MyBlueFolder".

  $vm = get-VM-name $vmName

  $folder = get-file-name $folderName

  $spec = new-Object - TypeName VMware.Vim.VirtualMachineCloneSpec

  $spec. Location = New-Object - TypeName VMware.Vim.VirtualMachineRelocateSpec

  $spec. Location.Datastore = $vm. ExtensionData.Datastore [0]

  $spec. Location.Host = $vm. ExtensionData.Runtime.Host

  $spec. Config = New-Object - TypeName VMware.Vim.VirtualMachineConfigSpec

  Get-disk hard - VM $vm | %{

  $dev = new-Object - TypeName VMware.Vim.VirtualDeviceConfigSpec

  $dev. Device = $_. ExtensionData

  $dev. Operation = [VMware.Vim.VirtualDeviceConfigSpecOperation]: remove

  $dev. FileOperation = [VMware.Vim.VirtualDeviceConfigSpecFileOperation]: destroy

  $Spec.Config.DeviceChange += $dev

  }

  $vm. ExtensionData.CloneVM_Task ($folder. ExtensionData.MoRef, $vmClone, $spec)

• View production environment

  IM currently only single local mode only viewplanner workloads running but looking at several courses of vm. Someone had problems with the viewplanner agent in a production environment? Already, we have an existing mode of production environment and won't cause problems.

  We are not aware of any problems so far and there were several virtual machines 100 + run without any problem. Can you PM me your email address and we cam discuss your use case in further detail.

• addition of virtual machine / Server esx for production environment

  Hello

  How can we add virtual machine or esx server for production environment?

  In general... As his "simple terms?

  Install ESXi host

  Install, run and connect to the host via the gateway client installed from the host on an external workstation

  Then

  OR THE OTHER

  Install and run the converter on each physical computer that you want to become a virtual machine

  Once finished, turn off power to virtual and physical.

  OR

  Create a virtual machine and install the o/s CD drive.

  What you want is way off the coast without 1 million questions about your installation.

• Problem with JMS via the SSL protocol in clustered environment

  Hello
  
  We run Weblogic 11 g Cluster (area) which consists of admin server and two managed server MS1, MS2.
  LIKE and run it on the computer 1, MS1 MS2 runs on machine 2. Both machines have two network interfaces, a public used for client connections and an intern for cluster communication, monitoring etc. The default channel of each Weblogic Server is listening on the internal network interface, and Moreover we have two channels (for http and t3 Protocol) configured to the public interface.
  The two managed servers are JMS provider and there is a JMS Module myModule in the field with the following JMS resources: custom connection factory myConnFactory (Load Balancing active = true = false server affinity, target: entire cluster JMS) and myQueue, which is a uniform distributed queue (targets: MS1, MS2). The queue is accessed by its logical JNDI name, but she is stuck on each managed server.
  
  JMS communication flows normally through t3 dedicated listening on the public interface. However, a new external client will send messages to myQueue and communication must be encrypted for security reasons. For this reason, we have implemented SSL. Instead activate a DefaultSecure channel, we left 'SSL listen Port active' = false (as the default channel would be linked to the internal network interface) and created a new channel T3SChannel t3s Protocol on the public interface for incoming client connections.
  
  The customer creates a t3s connection to the cluster (through T3SChannel) and gets the factory connections and the queue, use the JNDI ( source) search. The JMS connection is in real-time with MS1. If we want to create two consumers for this queue, the consumer of fist is created the MS1 and the second will be created on MS2 (thanks to active balancing). However, the creation of the second consumer fails with an exception (it is thrown on the client):
  
  java.rmi.ConnectException: no valid port known for: "DefaultSecure [t3s]: t3s (t3s): mserver1 - internal .company .com: 56213:null:-1 ';" No router available at destination
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
  at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:396)
  at weblogic.rjvm.RJVMImpl.ensureConnectionEstablished(RJVMImpl.java:303)
  at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:347)
  at weblogic.rjvm.RJVMImpl.getRequestStreamInternal(RJVMImpl.java:610)
  ... 18 more
  
  We were told that the exception can be avoided with t3s < default protocol > - < / default protocol > element (default is t3) added to the config.XML in the Weblogic domain. If we configure t3s as default protocol, we also need to activate the DefaultSecure channel on each server and then everything works and the customer is able to correctly create consumers.
  
  However, as a side effect, the entire cluster on weblogic.rjvm communication layer and then by t3s. We do not want that because internal cluster communications are set enough with other methods and it will have impact on the notable performance in the production environment. In principle, it should be possible to enable the external client to connect to the JMS provider via the channel new, safe, without affecting the existing internal communication in the cluster (which should be a black box for the customer).
  
  My question: is it possible to run the example described without defining the default protocol to t3s?
  
  Thanks for the reply.

  My question: is it possible to run the example described without defining the default protocol to t3s?

  Thanks for the very clear problem description. I checked with our customer support guru and I'm sure that the answer to your question is no, I think you have encountered a known problem and have already struck with the recommended workaround.

  That said, you can be able to avoid at least partially the problem by setting "server-affinity = true" on your CF. as you probably well know, affinity = false encourages consumer and producer traffic to route customer, on its server host connection, then possibly on a "second leap" to another server in the cluster. It looks like the attempt of an implicit downgrade of a secure request origin SSL in the first bond on a channel not secure in this second jump is to throw the exception.

  HTH,

  Tom

• Query on the physical Architecture, the logical Architecture and model

  Hi Experts,
  I have a confusion regarding the physical, logical and model Architecture Architecture. Please tell me what type of information or data, these three above hold.
  Thank you

  Physical architecture contains information about the physical configuration of your environment e.g. nameservers, jdbc, usernames, passwords etc connection strings

  The logical architecture provides an abstraction layer that allows to group by similar contexts of physical architecture components that reside in different locations/environments.

  Patterns are reversed representations of objects in your physical architecture that is tables, flat files, etc. The models are used as sources and targets in your UI design