View production environment

Similar Questions

• Error 401 during the passage of the assessment of the production environment

  Hello

  We recently moved our application for assessment of the production environment by using the credentials provided by the Push of BB Services, only to find out that we receive an "HTTP 401 - PushServiceId/password status invalid in the authorization HTTP header" whenever we try to send a push notification.

  We do not have change our code (which works very well using assessment data) at all except for his replacement by credentials. We use the URL https://cpxxx.pushapi.na.blackberry.com/mss/PD_pushRequest to send our push notifications, where xxx is the CPID provided by BlackBerry, and we're certainly using the password for the initiator to push (instead of the password for the portal content provider).

  Needless to say that we are base64 encoding app id and the password in the header, and as I said if switch back us to the environment assessment (change credentials), everything works fine.

  This becomes a problem, I would appreciate help if someone was faced with a similar problem.

  That's all. He works with the new credentials.

  Thank you.

• ORDS3.0EA can be used in a production environment

  Hello:

  I had planned to launch a project to deploy a Web service with ADR 2.0 and probably with Apex.

  But now ORDS3.0 EA was released. I can deploy without apex, and it has a function to simply deploy webservice.

  So now I need to decide whether to use ORDS2.0 or 3.0 in my project.

  EA can be used in a production environment? Can the project to have a month or two for the kickoff, if I have a question in the EA version, I raise a SR on EA version?

  Please consult the readme.html in the distribution, as he says it, EA builds are NOT supported for production use

• On the VSAN architecture in production environment

  Hi guys.

  What is the best architecture VSAN for a production environment?

  All in one VSAN witch cluster storage and VM on the same cluster or node have a VSAN cluster 2 cluster and another with a virtual machine, only that store a virtual disk on the VSAN cluster?

  Thanks in advance.

  If I understand the question, then you don't have the choice with the current versions of the VSAN.

  In order to access the database VSAN, the virtual machine must be deployed to an ESXi host computer that is part of the VSAN pole.

  The VSAN data store can be exported outside to ESXi hosts that do not participate to the VSAN cluster.

  HTH

  Cormac

• BIEE 11 g, how could I Stéphane newspaper in a new production environment page?

  I want to Stéphane, the login page in the environment from development to a production environment,

  any suggestions?

  You need to work on the location of \FMW\Oracle_BI1\bifoundation\web\msgdb\pages\common\signin.html and page signin.html

  Copy of files like regular might work

  ~ http://cool-bi.com

• Set up a pre-production environment...

  My current employer has a pre-production environment that is being updated nightly from the production. I started to look at how it is done (powerCLI script) and I'm trying to make things better.

  Here's how it works.

  A snapshot is taken of production servers, which 'freeze' the base vmdk disk. A new virtual machine is created for pre-production and it uses the 'frozen' drive to the production server database, because it is not persistent mode, clean disc. Of course, the virtual machine is connected to a group of isolated ports. Basically, this allows the team dev/infra to have an identical copy of the production servers anytime (just run the refresh script).

  While this works very well, I have a problem on using disks of production for this purpose. Usually, I prefer to leave only one production and complete clones have either fully provisioned pre-production environment.

  Suppose I'm onboard with happens like that and I want to automate the creation of these reservoirs of pre-production. Right now they are built manually to the new servers, and then the refresh script.

  Refresh the script:

  (A) pre-production shutdown server

  (B) remove the snapshot on the production server (committing the latest changes to the base vmdk)

  (C) create new snapshot to the production server (freeze the base vmdk)

  (D) Power Server pre-production (with validated changes)

  
  This script is scheduled every night to start the next day with a cool environment. Another advantage of this approach that is not persistent, it is that a simple reboot brings the pre-production back to a clean version (if tests are not doing well).

  Issues related to the:

  Is there a way to clone a virtual machine without the disc? This would make the easy creation of new servers in pre-production. Clone, log drives, change the port group. Fact.

  Is there a better way to achieve that kind of result without this kind of 'false linked clones?

  The following seems to work for me. A few notes:

  • The virtual machine is cloned without any of its VMDK
  • The new virtual machine is created on the same node of ESXi and store data as a source of VM (since you don't seem to have special requirements in this aspect)
  • This script does not work for a virtual computer with RDM disks

  $vmName = "sourceVM".

  $vmClone = "cloneVM".

  $folderName = "MyBlueFolder".

  $vm = get-VM-name $vmName

  $folder = get-file-name $folderName

  $spec = new-Object - TypeName VMware.Vim.VirtualMachineCloneSpec

  $spec. Location = New-Object - TypeName VMware.Vim.VirtualMachineRelocateSpec

  $spec. Location.Datastore = $vm. ExtensionData.Datastore [0]

  $spec. Location.Host = $vm. ExtensionData.Runtime.Host

  $spec. Config = New-Object - TypeName VMware.Vim.VirtualMachineConfigSpec

  Get-disk hard - VM $vm | %{

  $dev = new-Object - TypeName VMware.Vim.VirtualDeviceConfigSpec

  $dev. Device = $_. ExtensionData

  $dev. Operation = [VMware.Vim.VirtualDeviceConfigSpecOperation]: remove

  $dev. FileOperation = [VMware.Vim.VirtualDeviceConfigSpecFileOperation]: destroy

  $Spec.Config.DeviceChange += $dev

  }

  $vm. ExtensionData.CloneVM_Task ($folder. ExtensionData.MoRef, $vmClone, $spec)

• addition of virtual machine / Server esx for production environment

  Hello

  How can we add virtual machine or esx server for production environment?

  In general... As his "simple terms?

  Install ESXi host

  Install, run and connect to the host via the gateway client installed from the host on an external workstation

  Then

  OR THE OTHER

  Install and run the converter on each physical computer that you want to become a virtual machine

  Once finished, turn off power to virtual and physical.

  OR

  Create a virtual machine and install the o/s CD drive.

  What you want is way off the coast without 1 million questions about your installation.

• Isolate the production environment servers in a test environment

  I would like to create a clone of my production SQL and Sharepoint server environment and isolate the servers from the rest of the environment. What I want to do is to create a new volume on my SAN and clone the two servers to it. After that, I want to always allow access to a consultant in order to access servers remotely while not allowing the rest of the production environment to see the servers. Is there an easy way to configure this?

  You can work with NAT.

  Add a virtual machine acting as a NAT and gateway in this "isolated" network

  Or, simpler, add a server or a client with a dual NIC, an isolated network and the other in the local network.

  André

• How to use the command import on the production environment?

  Hi gurus of the OFA.
  
  I want to know about the production environment OAF and development environment, the differences between them and how to use the command import on the production environment?
  
  
  
  Concerning
  
  Ajay Sharma
  

• How to deploy my portal to the production environment

  Hi all
  
  I use the ASDK developed an access portal, my question is how to deploy my portal to the production environment? You must also install the ASDK in a production environment? Or just install the package of execution?
  
  Thank you
  Alan.H

  Hello Alan,.

  Is this an application ASDK 10 g or 11g? In both cases, the answer is really the same thing: do not install the ASDK in the production environment, but for 11g it's much easier to do.

  Kind regards
  Colin

• EVC support & Production environment

  Hello

  ESX 3.5u4 VC2.5u4

  I just started to watch VCA recently a few blades of dealer for the production environment that are 45nm CPU rather than our 65nm normal ones.

  The KB below shows only not for use in a production environment, but does not specifically mention EVC. I know that CVS is masking CPU are pretty much the same thing, I was wondering if there was a difference?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1991

  Anyone use EVC in production have comments?

  Thank you

  Kosch

  VCA is officially supported by VMWare?

  Yes.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• com.adobe.rtc.util.RTCError: is not active (on our production environment)

  Hello

  We have the following error message ""com.adobe.rtc.util.RTCError: is not active "on our environment (3 different accounts of low-COST airlines), including our production environment." It is a new mistake that we did not take before. We had the success of the video conference in the past few weeks, and our code base has not changed for months.

  The following code generates the error:

  Caller caller = getAccountManager();

  accountManager.createRoom (room, "HHConference");

  A MessageItem = new MessageItem ('element', conferenceMode.getValue (), 'point');

  accountManager.publishItem (room, 'roomMode' 'value' item, );

  The variable 'room' is the name of room composed of alphanumeric characters in lowercase (up to 21 characters)

  The model name is "HHConference"... Is it a problem to be in capital letters in the name of the template?

  The "conferenceMode.getValue ()" returns the integer "7".

  What is change your side who could explain this error?

  Fast help would be appreciated, because we have a demonstration on Friday.

  Thank you very much!

  The servers are up. The service is back to normal.

  We're really sorry for the inconvenience.

  We will post more information in a little bit on what was going on.

  Thank you

  Julien

  Supply quality engineering team

• Development in Production environment deployment

  Hello
  
  I don't know the deployment process OBIEE report development environment for Production environment. Can someone help me please.

  Hello
  Copy the catalogue integer and dev to prob RPD.
  If you want to copy specific report go OracleBIData\web\catalog\samplesales\root\shared\sample + sale (Group folder name)
  You can copy reports under files and dashboards in _portal in Sample sales group folder... two files and problemcs files. But you may miss security applied on these dashboards.

  http://www.rittmanmead.com/2008/04/28/migration-OBIEE-projects-between-dev-and-prod-environments/

  It is recommended to copy the catalog integer and RPD (or) shared copy and system folders and their files to OracleBIData\web\catalog\samplesales\root problemcs so that you won't run out of security, and you either will drive users of data that may contain data created by them.

  Thank you
  Srikanth

• Development & Production environment

  Hello
  
  Now I have the Production environment from details below:
  
  Server 1: Planning, + componet related
  Server 2: Essbase
  Server 3: RDBMS
  Server 4: Workspace and Reorting financial
  
  I need to create develpoment environment according to my knowledge:
  
  Option 1: Install all components on a single server + RDBMS
  Option 2: Install all components on a single server without RDBMS (RDBMS can be used in Production environment)
  Option 3: same as production (different different server component)
  
  Later, I am planning to migrate Production application, development or the case could be the development of Productiion
  
  Please suggest best option and any inconvenience that I go with Option 1.
  
  Regrads
  Kumar N

  If it will be used as a repository of hyperion then as long as you have enough resources so it could be on the same server.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Migration of the repository of security in a Production environment

  Hi, I use jdev11g and I'm trying to deploy and app with authentication and authorization of weblogic 10 gr 3, I'm looking at the "migration of the repository of security in a Production environment" section an i do not find these settings and other parts of this section: "
  
  fromCredStore the name of the identifying information from the source store service instance listed in the entrance to jps-default context (identified by the name of your application)
  fromPolicyStore the name of the source store service instance listed in the entrance to jps-default context (identified by the name of your application)
  srcFolderLocation the path to the file local cwallet.sso
  destFolderLocation the path to the target cwallet.sso file
  srcFolderLocation the path to the file local jazn-"Data.xml"
  destFolderLocation the path to the target system-jazn-"Data.xml" file
  
  I have no problem deployment of authentication only, the problem is when I use the option "authentication and authorization" for security, I can't log in to any user that I have defined, as the error page, I set you only identical to the login page and it returns me to the page of connection/error all the time connect with any user I defined.
  I wonder is there any link or video with an example of this, cause there seems little complex, thanks in advance.
  
  Published by: Julio IP on November 10, 2008 15:37

  Hello

  Please report to us. In fact, we are developing a tutorial Oracle for example covering the safety of the ADF. There is no video or other of the documentation

  Frank