on w/vista Movie Maker

Similar Questions

• Vista movie maker clip is shorter, once serious on DVD

  Series of clips added to Vista movie maker 6 to make short. Clips work perfectly on preview but once the DVD is burnt a few clips are shorter when played on a DVD player.

  Thanks for your reply J, followed the instructions to the letter but unfortunately same result.

  Clip ends early, fading out & then fading the next in the movie clip.

  ==================================

  All the clips are the same format?

  Transitions allow portions of the video to overlap clips.

  That's how it fades smoothly from one clip to another.

  Have you tried without transitions?

  You can adjust the length of transitions?

• change the Formate of my project on windows vista movie maker version 6.0.6002.18005 so that other media players can read?

  During my windows vista movie maker version 6.0.6002.18005 on a dvd project, I need to change the file type of engraving (.) MSWMM) in WMV file
  I need to change the format so the vedio can be read or opened by other media players, how to complete the project and save it to the computer in a format compadable for other media to read players?

  During my windows vista movie maker version 6.0.6002.18005 on a dvd project, I need to change the file type of engraving (.) MSWMM) in WMV file
  I need to change the format so the vedio can be read or opened by other media players, how to complete the project and save it to the computer in a format compadable for other media to read players?

  ==========================================
  . MSWMM is the Movie Maker project file... This is only useful when
  reopened in Movie Maker for editing.

  To create your video file .wmv, you must publish your project
  See the following articles:

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Slideshow with music created using Windows Vista Movie maker - but it can't download Facebook like not supported file - how do I make this compatible film

  I created a slide show movie maker in Windows Vista - but it will only play on the movie maker - cannot download on facebook; the burned DVD is not compatible with basic DVD players.  Nothing does support that kind of file - how can I convert this file into something that can be shared and played on other devices.

  . MSWMM is not a movie file... This is a Movie Maker project
  file is useful for a re-release in Movie Maker.

  If publish you (save) project in the. Film WMV format...
  It can be played in Windows Media Player, shared with
  other people and burned on a DVD-video using Windows DVD
  Maker.

  See Help on editing the following articles:

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - Edition
  http://www.Papajohn.org/Vista-publishing.html

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

• opening files with windows vista movie maker .vcr

  Im trying to open the files of replay of a game that I play. But the Director of windows won't open them. is there a way to do this that I'm missing or not?

  Im trying to open the files of replay of a game that I play. But the Director of windows won't open them. is there a way to do this that I'm missing or not?

  =============================================
  You cannot import directly from VHS to Movie Maker, unless you have
  the necessary equipment.

  The following items may be worth a visit:

  Windows Vista-
  Throw those VHS tapes
  http://Windows.Microsoft.com/en-us/Windows-Vista/toss-out-those-VHS-tapes-save-your-home-videos-to-DVD

  Windows Vista-
  Import analog video to your
  computer using a DV camera
  http://Windows.Microsoft.com/en-us/Windows-Vista/import-analog-video-to-your-computer-by-using-a-DV-camera

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• random transitions on vista movie maker 6

  I recently discovered the filmmaker windows 6 on my computer, after several years using proshow gold.
  Anyone know if it is possible to apply transitions 'random' to all the slides. I commonly slideshows using a lot of pictures, I'd find a lot of your time to apply transitions to each slide individually

  Thanks for any help on this

  brand

  I recently discovered the filmmaker windows 6 on my computer, after several years using proshow gold.
  Anyone know if it is possible to apply transitions 'random' to all the slides. I commonly slideshows using a lot of pictures, I'd find a lot of your time to apply transitions to each slide individually

  Thanks for any help on this

  brand

  =================================
  Automatic video option might be worth a try.

  Windows Vista-
  Make a movie quickly in Windows Movie Maker (AutoMovie)
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-quickly-in-Windows-Movie-Maker-AutoMovie

  FWIW... PhotoStory 3 may be worth a try for the creation
  Video slide shows from still shots:

  PhotoStory 3 for Windows
  http://www.Microsoft.com/windowsxp/using/digitalphotography/Photostory/default.mspx
  (Yes, it will run on Vista, but not Win7)

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Extension MSWMM will not work in my version of Vista Movie Maker - how can I change the extension?

  Downloaded a film strip of my camera for Movie Maker on a friends computer - there the MSWMM extension but it does not work on my Movie Maker - can I change the extension?

  Downloaded a film strip of my camera for Movie Maker on a friends computer - there the MSWMM extension but it does not work on my Movie Maker - can I change the extension?

  ==========================================
  . MSWMM is the extension of this file is a Movie Maker Project file...
  useful on the computer that created for a re-release in Movie Maker
  purposes. Even if you could open the file... it would be pointless to
  you unless you have the files video sources of origin.

  Sounds like when you imported the video copy of your friend of
  Movie Maker, you simply saved the project and have not saved the file
  in a video format .wmv or .avi.

  If your friend still has the actual video file ask... for this file or reopen
  the .mswmm file and try to save or publish the file in the .wmv format.

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cannot import. In Vista Movie Maker MOV files

  I have pictures in my folder of photos I want to make a DVD. Some images are video clips with a file extension. MOV. When I open windows movie maker and click on "importt" I find my photo file and select one of the video clips and try ti import it. I get a message that says "cannot import that movie maker does not recognize the codec. What should I do to get this program to accept my video clips with the .mov file extensions?

  Hello PorterQuinn,

  Thank you for posting.  You will need a 3rd party software program or conversion to convert .mov to another type of file that will be recognized by Movie maker.  There are a few conversion tools free availible.  You can use your favorite search engine to find some of them.

  Please let me know if this helps you.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Why the length of film does not change when I remove Vista Movie Maker clips?

  You have not answered my other question.  I get an error "does not fit" when you publish a movie on dvd. I deleted half the clips in the storyboard and length does not change. I always get the error "will not fit". After I saved the project. It seems that it becomes the length of the imported clips not what is in the table of Storyboard. The length of the table of Storyboard is only 01:30, but the length in the window shows 02:42 that is causing the error. It seems to me that it should use the length of the table of Storyboard because it's what makes the final video on dvd.

  Yes... adding or removing items from the timeline should change the duration of the project.
  The files in your component collections have no effect on the duration of the project.

  I suggested that you publish in the movie .wmv format to see if the version with clips
  removed would still last for 02:42.

  As I have said from the beginning... creating several small projects may be your solution.

  I'm sorry that my suggestions seem redundant to you. Perhaps you could find assistance elsewhare.
  There is a forum dedicated to Movie Maker on the following link:

  Windows Movie Maker Forums
  http://www.windowsmoviemakers.NET/forums/

• Vista Movie Maker won't let me publish

  Hello.

  I try to publish a video I worked so long on and when I get to 40%
  It stops and it says: Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again.
  I have enough free space: 118GB
  The video is 1920 x 1080
  And it takes about 2 min.
  I'm very angry they may not make a program that WORKS!

  Hi Eddynstain,

  See the suggestion of:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-sound/Windows-Movie-Maker-WMM-cannot-publish-video/859955f8-382a-42f2-A4C4-58fb99b1f205
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/cannot-publish-a-movie-in-MovieMaker/630ec718-849e-4A28-b2b6-dcde5fca7b5d

• Get an error message when download a m4a file in Vista Movie Maker

  Original title: I'm doing a filmmaker and it let me download music

  Im trying to download a m4a file and it used to work, I get an error message

  Im trying to download a m4a file and it used to work, I get an error message

  M4A is not supported by Windows Movie Maker.
  Google for a FREE audio converter. Convert m4a to wma or wav. Then reinsert in movie maker.
  Here is a link to one of the free Converter: AVS Audio Converter.
  http://www.AVS4YOU.com/AVS-audio-converter.aspx?type=GoogleAdWordsContent&gclid=CNKYucbuoqICFcl25Qodaw2Axg

  NOTE: There are many others on the web. Google for it and decide for yourself.

  t-4-2

• Windows Vista Movie Maker

  I'm trying to burn a dvd on windows movie maker... It was the encoding and stopped at 31.3%, that he has not moved for the last time. What should I do? ive tried to burn a few times every time it freezes at that time or sometimes has 'unspecified error '.

  I'm trying to burn a dvd on windows movie maker... It was the encoding and stopped at 31.3%, that he has not moved for the last time. What should I do? ive tried to burn a few times every time it freezes at that time or sometimes has 'unspecified error '.

  =====================================
  That_might_make a difference of three things.

  (1) in Movie Maker... go... Tools / Options / Compatibility tab
  and uncheck all filters / OK

  (2) check your source file formats...

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  (3) problems can occur if a project is too complex... sometimes
  It can help to remove the transitions and effects. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• MPEG-2 encoder is missing in Vista Movie maker - Satellite P200-14N

  In the Moviemaker in Vista Premium 32 bit is missing MPEG-2 encoder.
  So far, that I understand that this is a program that is incluid Windows.
  Never remove a program. Can someone help me?

  Hello

  The MPEG-2 encoder is part of the most popular packages of codec which can be downloaded from different Web pages.

  For example, the codec K-Lite package contains this MPEG-2 encoder.

  I recommend looking a bit more for some codec packs and install a.

  Good bye

• How to make a vertical video clip when it is on the side in Windows movie maker Vista

  In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?

  In the montage of video clips in Windows Movie Maker how do you turn a clip when veiwing on the side? Photos have an icon for the vertical flip but not video clips, I can't figure out how?

  ==========================================
  I assume you are using Windows Live Movie Maker?
  (if you use Vista Movie Maker 6... See the last article)

  Windows Live Movie Maker can turn a video clip, but you
  may need to convert the video to a compatible format like
  . WMV, before you can import it into Windows Live Movie
  Maker.

  See the following screenshot.

  Windows Live Movie Maker - rotate 90 ° right
  http://www.howtogeek.com/wp-content/uploads/2010/04/sshot710.PNG

  Also... the following article is maybe worth a visit:

  Shoot a video of 90 degrees with VLC or Windows Live Movie Maker
  http://www.howtogeek.com/HOWTO/14751/rotate-a-video-90-degrees-with-VLC-or-Windows-Live-Movie-Maker/

  After having shot the video... Save it in the WMV format.

  How to save the project in Windows Live Movie Maker to WMV Format
  http://www.YouTube.com/watch?v=ZyqZm5MBc7o

  And the following freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free Video Flip and rotate
  (XP SP3, Vista, 7 and .net Framework 2 SP2)
  http://www.DVDVideoSoft.com/products/DVD/free-video-flip-and-rotate.htm
  (* You can uncheck the options to install the)
  DVDVideoSoft Toolbar and iTunes plug-ins *)

  How to use Free video Flip and Rotate
  http://www.DVDVideoSoft.com/guides/free-video-flip-and-rotate.htm

  Movie Maker - how to rotate a video taken from the Angle easily - XP - Vista
  http://www.TipsandTricks-HQ.com/how-to-rotate-a-video-taken-at-an-angle-easily-527

• Under Vista, coding of DVD Movie Maker problem

  On Vista, try to burn on DVD (from Director of windows) a photo & camera video scenes total area about 20 minutes, while coding it continues to freeze to 42.7% and sometimes 48.2%. Help on computer site did not help as the site of coding is required. Keep train but get not anywhere, any help appreciated. Bill.K.

  On Vista, try to burn on DVD (from Director of windows) a photo & camera video scenes total area about 20 minutes, while coding it continues to freeze to 42.7% and sometimes 48.2%. Help on computer site did not help as the site of coding is required. Keep train but get not anywhere, any help appreciated. Bill.K.

  ===============================
  You are running Windows or Vista Movie Maker 6
  Live Movie Maker?

  Have you tried to save your Movie Maker project
  in the format of WMV movie to a folder on your hard drive
  disk before importing in DVD Maker?

  Sorry... I don't have the exact answer, but I know
  some questions that may contribute to this problem...

  (1) using the incompatible sources in the project files.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  (2) the project is too large and/or complex.

  The fix for this would be to create several small
  projects and save each of them in the movie WMV
  format in a folder on your hard drive.

  The collected WMV files can then be re-imported
  in Movie Maker to bring together in a single
  film or they can be imported into DVD Maker
  and each comes a scene on a DVD.

  (3) codec issues.

  Sometimes, this can be corrected by opening film
  Manufacturer and go to the... Tools / Options / Compatibility
  tab, and uncheck all filters / OK.

  Not an option if you are running Live Movie maker
  but you can do it in DVD Maker,

  See the following article:

  How to burn DVDs with Windows DVD Maker
  http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
  (scroll waaay down for...) What to do in case of problems)

  (4) video driver needs to update.

  If you reduce the graphic hardware acceleration as
  According to the instructions in the following article... you can
  See an improvement. If... Yes, you need to update
  your video driver. (improvement or not... do not forget to)
  return to full acceleration after the experience)

  How to put in back of graphics hardware acceleration
  http://www.pptfaq.com/FAQ00129.htm
  (scroll down to: "If you use Windows Vista")

  Also, some systems cannot handle Vista Movie
  Machine 6 or Windows Live Movie Maker... among those
  instances... There's an earlier version which can be
  downloaded and installed:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker 2.6
  http://www.Microsoft.com/en-US/Download/details.aspx?id=34
  (works on Vista and Win7)