Once a document is printed the State remains 'impression' block all others. Its a 8600 Pro more

Similar Questions

• HP Deskjet 3050: deskjet 3050 does not print the JPG files in color - all other documents are printed only in black and white

  Dear all,

  I have a problem with my Printer 3050 Deskjet. (USB connected with my laptop).

  My printer does not print documents colors in color, but only in black and white (with the exception of JPGs (photographs) which are printed in color.

  Word or PDF documents (for example) are always printed in black and white - even if they are in color.

  Copy of pages in color on my printer is not a problem.

  This works perfectly well. The printer is connected to my PC via USB.

  Cartridges (color and black and white) are practically new and original HP cartridges.

  Could the problem be associated I could have changed by accident print settings.

  Thanks in advance for your advice.

  Cheticamp

  Hi Cheticamp,

  In controlling panrl → devices and printers.
  Right-click on the printer and select Printing Preferences.
  Cot the Advanced button and make sure that grayscale printing is set as stop and confirm.

  From within Word, click file > print and click settings.
  You will see the screen Lady printing preferences.
  Press Advanced Options and check the optio grayscale is set as off for Word as well.

  Hope that helps,
  Shlomi

• I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center.

  Connection to the local network - properties dialog box

  Hi, I'm not able to open the properties and the State in Local (or all network devices) network. Actually I am not able to connect to the local area network connection in network and sharing Center. But I can't access the Internet. My OS is Windows 7

  Hello Rajaneer,

  Is the computer that you are using a personal computer or a work computer?
  You will need to re - install your network card drivers like something was damaged and it prevents you to access the property:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• The connection to complaints.donotcall.gov while the page is loading. "All other pages load fine. Loads of everything perfectly on I / E 8

  When you connect to the 'do not call site' to complain I get the following message "the connection to the complaints.donotcall.gov was interrupted while the page is loading." All other pages load fine. Loads of everything perfectly on I / E 8.
  I started Firefox in safe mode and got the same results.
  Disabled the firewall and virus programs, no help. I have 2 new computers about 2 years, both have the same problem with version 12.0

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file

• HP Officejet 7610: Print the task remains stuck in the queue

  I want to install a 7610 Deskjet to print via WiFi on my home network to a windows PC 10.

  It prints pages test locally, and the computer (preferences Print - print a Test Page).

  It still prints the first document, but that the document never leaves the print queue. His status will be 'print' and sometimes size will show that all the file has been sent (e.g. 123/123 MB and sometimes it will show almost all has been sent (for example 120 MB / 123 MB).)

  The doctor Print (v4.9) downloaded and installed: HPSupportSolutionsFramework - 12.5.26.37.exe. The print doctor always reports "Print queue problem solved" and remove the blocked entrance. I can clear the error by deleting files to print that and restart the print spooler service. However it only lets me exactly a document more having to restart the print spooler.

  Tried to use an other PC Win10, same symptoms

  Printing a small text file or print a Page of Test works, but any file to print several pages fails. A tried. PDF. Docx, Web page of the Chrome or edge and all fail.

  Help?

  -Jeff

  Did you check the firmware of the printer? (Link to firmware HP)

• change suddenly in the front and back with Word 2010 and JO 8600 Pro printer

  I have been successfully using Word 2010 and my Officejet Pro 8600 - to set duplexing if necessary.

  I used printing without margins to print 8.5 X 11 brochure and was happy with the result (no white space on both sides).

  However, this somehow messed up the original settings and I am unable to print in duplex mode now. The only option is "manually print on Both Sides.

  Help!

  Sunshyn, I can still double-sided of MS Word my other printer... I have a Canon laser as well.

  I have Windows.

  I think I have the solution... I couldn't change the settings of the print window. But I did enter the printer via the control panel and found the same parameters, but also found the apply"" button. Then I "applied" my desired settings and things are fine.

  However, it is a little confusing because he wasn't the "Apply settings" button in the menu printing, so wouldn't change.

  Now I know that go through the menu of the printer, the print document settings.

  Thanks for following up... I think I'm OK for now.

• I bought my iPhone 5 s by T-Mobile and 2 months left to purchase. My phone don't get re will not charge. Support Apple says this isn't the phone and replace the cable. This was done and the problem remains. Anyone who has experience of this pro

  I bought my iPhone 5 s by T-Mobile and have 2 months left on the purchase. My phone no longer accepts a new presentation. Apple support ran a diagnostic and said it isn't the phone and that I should replace the cable. This was done and the problem remains. Everyone has to experience this problem? And, if so, what was the problem?

  He likely is the phone, but you do Apple physically inspect it. Send it or take it to the Genius Bar. You can do one or the other of http://getsupport.apple.com.

• Improve the "Sweep" function to block all senders from a domain.

  Please, improve function "Sweep" to block all senders in this area.  Dozens of names attached to a field of Spam, and they get easily through the scan function.  We're going to put spammers out of business.

  The terms of the mail has the ability to block domain addresses.

  I'll add that the scan function has a limit of 500 entry.

• activation of the 3D layer switch hiding all other layers in the timeline

  I activated the switch to 3D on one of my layers layer on my calendar of EI and makes all other layers disappear.  They are still on my calendar, but my composition window does not show anything except these layers so that I put the 3D switch.  Any thoughts as to what I'm missing here?  It's good to be something simple, but I can not understand...

  Looking for a custom view, front, top, left, right, and no Active camera. 2D layers do not appear in these views.

• Submenus are moving to the top of the screen in IE8? All other browsers display correctly

  First of all, I am new to the design of websites and Dreamweaver, but a quick learner. So - please assume that I know very little.

  I use a mac and created a horizontal nav bar using the widget spry (DMCS3; Spry 1.6.1). Everything is ok, except for the submenus in my navigation bar. I confirmed it seems correct (for PC) in Chrome and Firefox and (for mac), Safari and Firefox. But in Internet Explorer 8, the submenus are moving all the way to the top of the screen. The only way I could solve this problem, is that if I type 132 px for the 'top', 'margin' in the category 'box' in my ul. MenuBarHorizontal of ul rule. However, by doing this it makes all other browsers display incorrectly (the submenu is down to the bottom of the page).

  I've seen where people have been to "conditional comments" in their CSS file, for IE... and if what I have to do, that what I write and where I need to put in order all IE8 users to conform to the margin of the top 132 px, while other users are in line with the original upper margin of 2 px.

  Finally, a few people have noted that the submenu buttons "stick" (loading/disappear slowly) as they scroll buttons, is there a way for me to fix this?

  Here is the link to the site, and my CSS file is attached - thank you in advance:

  http://www.newarkfop.com/test/home.html

  P.S. Attaches would be great, but Im also interested to know why IE same did it than its weight?

  Try