Once BIOS updated by Satellite Pro U400-15N no longer works

Similar Questions

• Satellite Pro U400 - BT does not work after installing Win 7

  Hello.

  I have a problem with my bluetooth device. I have Toshiba Satellite Pro U400.
  My previous operating system was Windows Vista business and I just replace it with Windows 7.
  Since I installed it my device Bluetooth does not work anymore.

  I have had no problems with it with my previous Windows.
  Now, the following messages will appear: "Bluetooth stack for windows by Toshiba is incompatible with this version of windows" I have windows 7 Professional.

  I tried to update the drivers, but I was told that I have the best and latest drivers.

  Can someone help me?

  Hello

  Seems that you are still using an old battery Bluetooth.
  You this should remove the system and need to install a new one which you can download here:
  http://APS2.toshiba-tro.de/Bluetooth/

  You can find the pile of BT for Win 7 32 bit and 64 bit version

  Welcome them

• During BIOS update by Satellite Pro A60 went down and did not start

  Hi all

  I have a Satellite Pro A60 and I've updated the bios. To halfway the update, my laptop came down and started Hasna´t since. It only give a couple of beeps (trying to tell me the bios is damaged, I guess) and turns off again.

  Tried to start with (~) key pressed (a tip I received from a friend), but without success.

  I live in a country where there is no available Toshiba dealer and I rather not ship the laptop for repair.

  Does anyone know how to fix this? Any help would be greatly appreciated.

  Thank you

  This doesn't sound good.
  If during the POST, the BIOS detects a problem, it will normally display an error message visual on the monitor explaining what the problem is. However, if a problem is detected before it initializes BIOS video card or a video card is not present or not detected then BIOS will play through the Speaker beeps to let you know there is a problem.
  Depending on the type of BIOS you have the BIOS can play beeps in a specific pattern to indicate what the problem is, or emits the signal even a few times indicating the problem.

  In your case, it is possible to s you used a bad BIOS or bad BIOS procedure. Both can damage the motherboard.
  To avoid such damage and mistakes, Toshiba published FAQ document.
  How to upgrade the BIOS on most of the units!

  That you should read before making updates to the BIOS!
  Unfortunately, I n t think that you can fix yourself. I think you should ask to help ASP.

• Satellite Pro S300 - USB no longer works

  Hello
  I have a 6 month laptop Satellite Pro S300-100 and running Vista 32 bit. He got 4 USB slots, 1 handset that works on the left side and 3 USB2 connectors right side and these 3 suddenly stopped working. I tried different connections, memory stick, external drive, USB mouse, but they are all dead.

  I've tried deactivited and operated them, no change. I checked the ports and the response of the system are that they are involved.

  I had a similar problem earlier on a Tecra 9000 a few years ago and the replaced the motherboard.

  Anyone has a solution, please?

  Hello!

  Do you have the yellow marks in Device Manager?

  I think that there is a hardware problem. Contact an ASP (authorized service provider) to repair your laptop.
  Here you can find:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good bye

• I need BIOS update for Satellite Pro M70 (PSM75E), but only for the BACK

  Hello world

  Help me!! I'm looking for driver for BACK Bios M70. Does not exist, only for windows and my cell phone is dead.
  Bad news, because after 3 minutes, stop!

  So I have only one solution (with the diskette bootable cd).
  So I need the dos version of the Bios

  Thank you

  This version is not available on the official support page so only one chance to get it is to contact Toshiba service nearest and ask for help.
  Sorry, but I don't see another option for traditional BIOS.

• Satellite Pro A - DVD no longer work after about 10 min of use

  No matter what program I run a DVD with (VLC, Windows Media Center) it freezes after a maximum of 10 minutes, this program becomes inadmissible.

  (Windows 7)

  Hello

  I put also t know why this happens, but it would be interesting to know if you could some practical information about your model of laptop.

  You have installed all the drivers for your laptop?
  You have to clean the DVD player using a microfibre cloth?
  Have you updated the BIOS?

• Re: Satellite Pro C650 - Audio no longer works

  Hi all.. I have a C650 - PSC09E-00501PMP er # 7A267273Q

  In recent times odd weeks I noticed the audio thro' speakers default... but a reboot was ok...
  But today I am unable to get the speakers audio thro all... even if its earphone thro ok O/P.

  Nothing on mute and shows the audio level and varies by activating the speaker (mixing table) icon.

  Conexant CX 20671 shown works well in Device Manager... Driver 4.111.0.64

  Tried a system restore...

  Everything looks OK on the control panel of configuration/sounds tab

  Would appreciate any advice... Thanks in advance...
  Norm

  When you unplug the headphones and open the sound properties > reading device is set as a default?

• Satellite Pro U400 - 150 - display has stopped working

  Hello guys,.

  yesterday I used to turn on my laptop (Satellite Pro U400 - 14) and it worked fine but after 1 minute my screen stopped working. I tried to restart the PC, and it worked OK again. But I turn on my laptop today and it didn t work at all. Everything is OK, PC works fine, everything is good, but only the display is black.

  I Don t know what happened with my laptop. :/

  Is there anyone who knows the answer to this problem?

  Thanks for all your answers.

  > Everything is OK, PC works fine, everything is good, but only the display is black.
  Of course, this isn't all right if nothing appears on the screen

  Connect an external monitor to check if you would be able to see something on the screen?
  Do this! Usually you should use the FN + F5 to alternate between the monitor internal and external.
  If this is not possible and nothing could be seen on the 2nd monitor, the graphics card problem can cause this.

• Satellite Pro U400-13D stops several times

  Hello world

  I only use the Satellite Pro U400-13D for office work. In the last days the laptop turns off without warning during normal operation.
  After a reboot, the problem recurs after a random time.

  This is known issue? What can I do about it?

  Thank you

  Alexander Lorenz

  Hello Alexander

  In General, this can happen on each laptop model and can be caused by different reasons. It can happen due to overheating or maybe some malfunction of the equipment.
  On this path, it is certainly not easy to offer accurate diagnosis or explanation why this happen.

  Have you noticed unusual behavior in front of your laptop turns off?
  Is it when some software is running?
  Portable temperature (surface where your hands are placed) is higher than usual?

• The update of the BIOS on Satellite Pro U400?

  I have a Toshiba Satellite Pro U400 (PSU41E) running Windows 7 x 64 and I try to update the BIOS to version 4.70 to 4.00.

  Whenever I try to do it from Windows using WinPhlash which comes with the download on the Toshiba site it seems to freeze when you try to Flash the new BIOS.
  I connected as the local administrator, tried to use other programs flash and even tried to do from a USB flash drive with no luck.

  Can someone please help me and explain how do I update the BIOS?

  Hello

  > tried to use other flash programs
  Never use other flash programs! In the worst case, you could damage the ROM module and then it must be replaced. Use only the program flash Toshiba that is tested and designed for laptop and the version of the BIOS.

  The update of the BIOS program is also designed for Windows, it s a Windows Update program.

  Satellite Pro U400 wasn t comes with Windows 7 so I guess you did your own installation. Value added package is required for the update of the BIOS program and can be downloaded on the European driver of Toshiba download page where is your laptop model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite Pro U400 - BIOS update gone bad

  Hi all!

  I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.

  I went to see the Web for Chris Bios recover.
  Have over 20 versions, but so far without success.

  My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
  Flash or SD ended in failure.

  The laptop is: Satellite pro U400 PSU45E

  Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
  There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...

  Every idea can be useful!

  Thank you very much

  Excuse my English

  f the subject isn't here, please redirect mderatora
  This is my 1 post here

  Hi mate

  Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP

  I hope that the ROM BIOS module is not too bad
  In the worst case that the mobo is damage but maybe it s not damaged

  However. You must contact a local ASP and must ask for the manipulation of the Fryer!

  Good luck!

• Satellite Pro C850-15N - some keys do not work.

  Am 90 per cent positive that this is not the fault of a broken keyboard keys do seem loose and work very well for a while.*
  --
  Basically, the other day I noticed the keys 3 and 5 were not work next to the f3 key (meaning I now have to go into the settings of brightness, whenever I want to increase it). I thought "I'll just reboot and see if that fixes anything" and he did... temporarily. I have to restart every time that I've lost the ability to use these keys, but now it does nothing.

  There is no update which should install Windows (updated 8.1 update 1 recently).
  There is no update options the keyboard driver (the box is grayed out).
  There is nothing stuck, they seem not damaged or less they touch.

  The features of my laptop;
  Name of the operating system Microsoft Windows 8.1
  Version 6.3.9600 Build 9600
  Another Description of the OS is not available
  Manufacturer of operating system Microsoft Corporation
  Name of HOUSE system
  The TOSHIBA system manufacturer
  System model SATELLITE PRO C850-15N
  System Type x 64-based PC
  SKU PSKC9E-01J00JEN system
  Processor Intel Core i3 - 2328M CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 4 logical processors
  BIOS Version/Date Insyde Corp. 1.60, 27/06/2012
  SMBIOS Version 2.7
  Embedded Controller Version 1.70
  BIOS Legacy Mode
  ---
  * I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - seems to me later for my model, such as the toshiba site list any keyboard updates.*
  ---
  I also grabbed the driver files if this will be of no use at all:
  PS/2 standard keyboard
  C:\Windows\system32\DRIVERS\i8042prt.sys
  C:\Windows\system32\DRIVERS\kbdclass.sys

  ---
  Can anyone give me any help? I'll buy a USB keyboard in a few weeks anyway, but for now, it's really annoying not being able to use these keyboard shortcuts: P

  > I asked this question on the Microsoft forums and I've learned to run the troubleshooter of material (did not help) and if defective, to search for the latest drivers for keyboard - I seem to have the most recent for my model, as from Toshiba Web site does not list the keyboard updates.

  It seems that this opinion is not from Microsoft staff, but some users of the forum.
  You should know that the drivers of keyboard (developed by Microsoft) are still part of the Windows System. Any Windows OS you use, the keyboard driver would be always installed as part of the OS. This means that the drivers of special keyboard DON T exist but system uses own driver...

  You can check the functionality of the keyboard in USB external keyboard.
  If external keyboard works properly, the internal keyboard is malfunctioning and must be replaced.

  If the external keyboard does not work properly too, then I recommend you to recover the laptop using Toshiba HDD recovery. Otherwise, there could be question of motherboard (keyboard controller).

• Re: Satellite Pro U400-160 - freezes when copying larger files or videos

  Hello:

  I have a Satellite Pro U400-160 and a VERBATIM external hard drive USB eSATA combo.

  If I turn on AHCI mode recognizes the drive, but when copying the video files or large file size, the system is frozen. However if I remove the mode AHCI works correctly. I have the version 9.8.9.1023 Intel (r) Matrix Storage Manager and my laptop BIOS v4.0 and Windows Vista Business.

  Thanks in advance.

  Hello

  Normally the AHCI mode has nothing to do with an external HARD drive. It is only important for the internal HARD disk if you install Windows.

  Anyway, you have installed all the updates of Windows for Vista?
  In addition, you should test another external HARD disk or with another cable.

  Welcome them

• Satellite Pro U400-12A - cannot load my battery

  Hello

  I have a problem with my battery. I bought a toshiba laptop has named satellite pro U400-12 or something similar.
  But so far I was unable to load the original battery.

  The light orange is always burn for about 10 minutes when I connect to the network and then starts flashing.
  The laptop does not even only by battery, even if it has been 'charge' the night...

  Does anyone have a nail, what is happening with my laptop?

  I would be very grateful for any helpful advice...

  Thank you

  Hello

  You must update the BIOS in order to solve this problem.
  I've got U400 and have solved the similar problem, updated the BIOS!

  Check it!

• Satellite Pro U400 - cannot install VAP on Vista 64-bit

  Hello
  Since I bought 4GB of RAM for my Satellite Pro U400 PSU45E, I installed vista Business 64-bit, with all drivers and bios 64 bit found on the toshiba site.
  easy, with the exception of the "value added package 1.1.19", whenever I try to install I get: error "failure of GetProfString."

  I installed every driver and utility for 64-bit, but still the same...
  Everyone has experienced with this?

  Without VAP, I can't use the Toshiba power saver, worst profiles I can't go back because I did a new install and deleted the recovery partition!
  Please, someone help!

  Hello

  VAP contains all the modules necessary and you n t need to install other tools in order to install VAP
  I think that it s a Vista may issue you should do a clean install, then you must update the Vista for the last State.
  After have installed all the patches Vista, try to install VAP and other tools.

  Good bye