Once removed paper jam, my HP Deskjet F4180 all-in-One printer will not print.

Similar Questions

• To re - install my web download drivers for my Deskjet F4280 all-in-One Printer

  I have installation problems with my Deskjet F4200 all-in-One printer on my Windows 7, Home Premium desktop PC / 64 bit version & I had, once last month, uninstalled my I bought online for my version of platform & bit of the os, printer drivers & all program of printer drivers have been uninstalled successfully in the programs section and my control panel features except for :
  HP Software IDF.

  I ended up, in addition to the tasks above performed & completed, deleted all files remaining hp of my drive (c).

  I discovered a web page of troubleshooting on the hp.com Web site, under the following title:

  ""Of HP Installer has stopped working "or the installation program does not run when you install under Windows 7 HP printing software"

  on the following web page: "http://support.hp.com/us-en/document/c03030583".

  My processor information:
             "AMD Athlon II X 2 240 processor / 2.80 Ghz '.

  I tried to re - install my drivers for my printer, & have problems trying to re - install, with no luck.

  I have read the following information since the last link web I mentioned (SHOWN above and here @: 'http://support.hp.com/us-en/document/c03030583') trying to follow them to correct my problem exact, but without success.

  If anyone who reads this could have a solution to my problems, please contact me either by one or more of the following methods:

  {Deleted private information}
  

  Thank you, Christopher Canfield.

  The troubleshoting document you provided a link to not tell to use the hotfix with the processor installed in your desktop PC.

  Have you tried to use the Wizard for Windows HP printer installation?

  I recommend to try it. It can solve the problem you are experiencing.

  If it is truncated, without success, then click on the following link and select Windows 7 from the list provided on the HP document.

  Uninstall the HP printer software.

  Once you have completely uninstalled the printer software and driver, run the HP printer install wizard again.

  Please keep us in the loop by posting your success or lack of success with the installation of the software of the printer here in your thread.

• My HP Deskjet F380 All in One printer will not communicate with Vista system

  My HP Deskjet F380 All in One Printer worked correctly for always until 25/04/11 and then later it stopped working.  I swear to you that I have nothing else so he can stop working.  I have lost the disc that came with the printer.  When I bought this way while you, I simply plugged it and a pilot has been downloaed righ away and it worked (aka plug & play).  Any help would be greatly appreciated thanks!

  Hello

  I suggest try to download the latest drivers from the link below and check if this can help:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  It will be useful.

• where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  where can I find the product number for a HP Deskjet F4580 all-in-One Printer?

  I typed 'to the HP Deskjet F4580 all-in-One printer"and the installation software cannot find the printer on the HP website.

  But it is the search manually separately via a different browser.

  So there must be another product number!

  Hello

  The following link shows his support site:

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3944758

  You can find lots of information on 6 sections.

  Kind regards.

• HP Deskjet F4280 all-in-one scan does not work. Start button / stop flashing when you press scan.

  Scan does not not on my HP Deskjet F4280 all-in-One.  The power button flashes when you press scan. Everything else works.  I tried to unplug it from the wall socket and reconnect it.  Not solve the problem. What else can I try?  Or, is it a piece of junk now and needs replacement?   My laptop (windows vista) did not go into repairs several months ago. Don't know if that had anything to do with it.

  Hi woodcarver60,

  Follow the steps outlined in the documents below to scan from the software.

  HP Multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03511921

  HP Multifunction printers - how Scan: Windows 7 http://support.hp.com/us-en/document/c03476857

  HP Multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03517146

  Scan from Windows XP software with the full functionality of HP for the all-in-one HP http://support.hp.com/us-en/document/c03517150 printers

  HP LaserJet multifunction printers - how Scan: Windows 8 http://support.hp.com/us-en/document/c03755019

  Scan from Windows 7 with full HP software functionality for all-in-one HP LaserJet http://support.hp.com/us-en/document/c03584750 printers

  HP LaserJet multifunction printers - how Scan: Windows Vista http://support.hp.com/us-en/document/c03584647

  HP LaserJet multifunction printers - how Scan: Windows XP http://support.hp.com/us-en/document/c03584350

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• Re: Deskjet 3520 all-in-one: print black ink NOT...

  I'm having exactly the same problem... It worked fine last time I used it... I put new cartridges of ink inside and black is dead... its crazy that it worked perfectly... have you already found a solution to your problem... His 03:00 and I spent hours trying to fix... I need my printer as soon as possible... I really need help / / I have a deskjet 3520 all-in-one... and all tests come back perfect... even cleaned the print head and everything...

  I actually uninstalled all previous updates for the printer and then is went to the hp site and entered my serial number and the number of product and downloaded all updates for this printer and downloaded printer Dr... After that it was finished I rebooted my computer and printer directs the Dr. PC. It came with nothing wrong, but I chose clean the print head and when he finished he asked if I'd like secondary cleaning too and I chose Yes. After that I tried to print an all black. Page and unlike prior it was not blank it was black, but red stripes then I printed again and the whole page was red but I printed again, and it was perfect... When before id try to print a page in black, he's white... My printer has not messed up at all since and its been a month... It is with its daily use for hours at a time in printing non-stop... I hope this works for you if you are having this problem and found that nothing else seems to fix it try this... It might be useful...

• HP Deskjet 3050 all-in-one: cartridge hp not getting not

  Hello

  I bought my printer HP Deskjet 3050 all-in-One J610a United Arab Emirates. I bought it is with me to the India and looking for cartirage 122 which I'm unable to locate.

  Is there a compatible cartridge in India? Or I can change some settings of the printer so that it accepts another type of cartridge which is available here? Otherwise, this printer is just a piece...!

  Thank you!

  Hello

  In India, you must use the HP 802 ink cartridges, but you must call HP India and ask them how to reset the printer to accept HP 802. Please follow the instructions below:

  http://support.HP.com/us-en/document/c02558798

  Kind regards.

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• levels for HP Deskjet F4100 all-in-One printer

  I installed Windows 7 on my desktop and can't find the HP Solution Center.

  Hi 2dw4,

  First, we will use HP printer Installation Wizard. HP printer install wizard for Windows was created to help Windows 7, Windows 8, and users Windows 8.1 download and install the latest and most appropriate HP software solution for their HP printer. Click here to download the utility > hppiw.exe

  If for some reason this does not resolve the problem, you can also download the full software functionality for the F4140 here. All-in-one printer, HP Deskjet F4140 software. This download includes the HP Deskjet (advanced imagery and product features) Software Suite and the driver.

  I hope this helps.

• HP Deskjet 3050 All in One J610 - do not connect to the network

  Hello

  I have a HP Deskjet 3050 All in One J610 peripheral.

  It worked fine for about a year, until one day he simply ceased to connect wireless to my network.

  I have not changed anything in the network, so I don't really have an idea why this happenned.

  The 'Wireless' has stopped flashing and I cannot know where to choose my network of. He asks a PIN (?) when I go to the wireless setup.

  Problem solved.
  I used the HP print and Scan Doctor tools, helped me to solve the problem.
  Thanks for reading my post and sorry for the spam your forums

• DeskJet F4180 all-in-one. E and the flashing light message

  Under the Attention light black/photo flashes, an 'E' is informed by the start the copy.  I do not have a paper jam, I removed the ink cartridges and put them back int (they have ink). I closed the computer and the printer down commpletely and turned off the power play and leave it for several minutes before restarting.  I disconnected and reconnected the cables to the back of the computer.   Help!  I have a few contracts I need to scan it and send it off.  Any help would be greatly appreciated.

  Sorry you had a problem with the error message 'E '.

  Here is a link that can help you with this message.

  http://support.HP.com/us-en/document/c00867129

  Let me know if it helps.

• Deskjet F350 all in one printer: deskjet F350 does not print

  The printer will print after replacing more paper in the middle of a print job. Checked for paper jam and it is clear.

  No error message flashing.

  @karlsruhe57, welcome to the forums!

  I read on how your Deskjet F350 will not print once you have replaced most paper during a print job. What comes to mind, is that the printer can think it's even more paper.

  Try to reset the printer and restart the computer and try again to print.

  Reset instructions:

  • Press the power button to turn the product on.
  • With the product, unplug the power cord from the back of the product.
  • Unplug the power cord from the wall outlet.
  • Wait at least 15 seconds.
  • Plug the power cord into the wall outlet.
  • Reconnect the power cord to the back of the product.
  • If the product does not light by itself, press the Power button to turn it on.

  Let me know what happens!

• transport jam f on Officejet 6310xi all-in-one printer

  I use an all-in-one HP Officejet 6310xi priniter.  I send the print command and when prinited sheet is delivered first four lines or are so prinitinig that half of the line and the message thenrerst prints OK.  However, after the delivery of the printed sheet I get message, "Transport jam" I received instruction of "open the door.  Clear jam and then press 'OK '.  How can I stop this from happening?  My operating system is Windows 7.

  Have you removed all paper from the input tray and shined a flashlight upwards in the status bar to ensure there is nothing caught in the rollers?  Remove the duplexer/rear access door and make sure that there is nothing in the rollers at the back.

  I would also check the printer.  The top and look down inside the right-hand side of the printer (right side of the carriage house).  Do you not see any paper into a ball in this section?

  There is also a document with steps to help fix a carriage jam in an Officejet 6310xi.  The document can be found here.  Let me know how it goes.

• DeskJet F4580 All in one printer paper does not

  The printer above does not feed to print paper.  I cleaned the rollers, as indicated in the user guide, but nothing helped.  What can I do to fix?

  Printer is almost a year old but barely used.

  I reinstalled the software and now works fine. Thank you.

• HP Deskjet F4280 All in One printer printing white paper

  Hello. My printer will not test the print or print. It will show the color with the alphabet and the colored blocks test alignment page. I have a Windows 7 64-bit. There is no error message. I have troubleshooted and he said everything seems to work fine. I think that my driver is for f4200 series, but it was what was available at the time and worked. I'm not very well informed about computers or printers. I should be grateful if you would help. Thank you.

  Update:

  I managed to do the work. I feel accomplished.

  I uninstalled all hp programs.

  Connected to the printer in. And then installed ftp://ftp.hp.com/pub/softlib/software11/COL30102/al-74858-1/DJ_AIO_03_F4200_NonNet_Full_Win_WW_130_1... update for windows 7.

  However, it won't be printed not black if she says black ink level is full. Help here?

  That phase. not me, for my cv to the job, applications will be dark blue and I see as special.

  I looked around the site and help forum. Thank you!