Once you install a new printer firmware for your printer, is it possible to return to the earlier version of the firmware of the printer in case an error occurs?

Similar Questions

• I am trying to install a new printer, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I am trying to install a new printer, and to do that I know I have to disable firewall settings. I try, but I get "due to an unidentified problem, Windows cannot display Windows Firewall settings? Can anyone help?

  I tried to go into Windows and change the settings of the firewall, but I get the same message.

  I also tried to run an update of the Windows security updates, but same message.

  I use Windows XP Professional Service Pack 3

  Any help would be greatly appreciated?

  Thank you

  M

  HI Maria/Winston.Not, trying to be coy but. I've never had close the firewall to load anything. It will be, or at least should invite you to make a choice to leave the program to run or not? Nevertheless.If you have windows activation hurt you firewall can reactivate manually without going through the bugs that you can not. If you click Start and choose the runtime application. Type cmd, and then press ENTER. When the command prompt box appears type "netsh winsock reset" without the quotes. He'll say firewall reactivated and ask for a reboot. Restart the computer and it will be active again. Just trying to help.

  Hi Winston/Hewlit,

  Thank you both for your advice.
  While waiting for your answers, I pushed all sorts of buttons and downloaded all kinds of programs in the hope that I could break the firewall (Hewlit the printer I tried to install says to disable the firewall to install the printer, and then turn it back on?).
  After a reboot, the message 'corrupt windows\system32 etc' file came and asked me to put in the original disc of Windows XP, I did not.
  Cut a long story short, I have now booked for a technician to come out as I'm totally lost.
  Thanks again for your help,
  M

• Print Spooler service is not running and cannot install a new printer

  My print spooler service is not running and the computer will not let me install a new printer. How can I fix it?

  Hi John,.

  What is the number and the model of your printer?

  You can try running the fixit of the printer and check.

  Diagnose and automatically fix problems printing and printer

  You can also consult the following articles and check.

  Printer in Windows problems

  Resources for the resolution of the printer in Windows XP problems

• My drives E and F have suddenly disappeared. I can't play my CD to install my new printer

  I searched with almost all programs which said it corrects your drivers, but they do not fix readers for the CD-DVD-R-W. These 2 drives have suddenly stopped working. I can't install my new printer... I have HP which is the computer that I and WindowsXP and still have no results.

  Hi PollyHarris,

  1. did you of recent changes on the computer?

  2. you have any third-party DVD burning software installed on the computer?

  3. you receive an error message when you insert a DVD in the player?

  See the link below and run them the fixit tool available, check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  If the previous step fails, then check in Device Manager for the status of the disk on the computer and after return details.

  How to solve the problems of hardware with Device Manager

  http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• trying to install my new printer wireless, keep saying window installation service could not be accessed.

  trying to install my new printer wireless, keep saying

  Window installation service could not be accessed. This can occur if you are running windows in safe mode or if windows install is not properly installed.contact your support for assistance staff.
  I'm not running in safe mode...

  Thank you so much, I used the fix it guy and it fixes the problem, I was able to install the printer wireless without problem...

• I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  I can't access internet wirelessly from my laptop because I installed a new printer which is now connected to my router, is - it related somehow?

  Hello

  1. what happens when you use a wired connection?

  2. how many devices are connected to the router?

  This can happen if you connect that a specific number of device to the router, and when it exceeds the limit. You can consult the router's manual or contact the manufacturer of the router to check if all the parameters must be changed to connect several devices.

   

  Hope this information is useful.

• When you install a new application, is it necessary to start from a clean boot to ensure that no application works?

  When you install a new application, is it necessary to start from a clean boot to ensure that no application works?  Somewhere, a long time ago, we advised me to always be in a boot environment when installing new applications and have always respected this notice since.  However, I recently learned that is not necessary and may even be counterproductive because some Microsoft Services are needed for new facilities.  My goal is to have no corrupted installations to avoid future problems, but I have nothing seems to give me resistance gremlin 100% and I still have my share of challenges.   Almost all applications that I install contains the warning to make sure that no application works before installing.  Can anyone tell me with authority the best way to ensure that new installations of new applications please?  In addition, the same orientation for Win XP Pro to do with Win 7 Home Premium please?  Thank you.

  YW. Yes, I think an important thing to take away is to realize that it is better to only install the necessary Windows updates 'priority '. There is one exception, apparently. Recently, an MVP made me notice that updates to certificate root (which although considered "Optional" are virtually useful updates to security for IE) must be installed as well.

  But others are optional and since then, they can be VERY problematic (especially updates of pilot and the dreaded Windows Search 4.0), you really should stay away from them!

  Happy to help to explain things. Good luck!

• After installing a new printer how to print a test page Windows 7?

  After installing a new printer for the operating system Windows 7, right click on the printer icon then properties, there is no choice of test page printed as XP.

  See the instructions that came with the printer. It might actually be a button on the printer.

• I am trying to install a new printer. I get an error code 80072EFD of # when I try to download the software. How can I fix it?

  I am trying to install a new printer.  I get an error code 80072EFD of # when I try to download the software.  How can I fix it?

  See if this article is of no help:

  "You may experience some temporary connection errors when you use Windows Update or Microsoft Update to install updates"
    <>http://support.Microsoft.com/kb/836941 >

  HTH,
  JW

• trying to install a new printer kodak esp 3.2, error 643

  Original title: error 643.

  trying to install a new printer kodak esp 3.2

  Troubleshoot network printer:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  You can place the computer in a clean boot and installation of the printer driver.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important:-do not forget to put the computer to a normal startup by following step 7 in the link above.

  You can also read the following article to download Kodak printer drivers.

  Kodak printer drivers

• I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

  Using the Dell recovery disks to reinstall?

  The origonal drive failed?

  If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

• my wireless mouse and keyboard do not with windows xp after you install a new battery.

  my wireless mouse and keyboard do not with windows xp after you install a new battery. they work very well in the diagnosis.

  Hi nwecker,
   
  -What is the brand and model of your mouse and your keyboard?
   
  If the keyboard and mouse are Microsoft, here are some links that you can give a try on:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard

  Solve the lack of response from the keyboard or the mouse wireless after weeks of typical use

• OPMSTM080.exe have insattted a new printer, I get this error message evry times print something

  OPMSTM080.exe have insattted a new printer, I get this error message evry times print something

  Hello District Commissioner,

  Thank you for your message.  What is the make and model of your printer?  Go to the website of the manufacturer of your printer and download/install the latest drivers for your computer.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How can I solve th

  I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.

  Hi abgolf3,

  The question may be how the new hard drive has been formatted.  Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage.  Is all the space on the disk are responsible?  If so, take a look at these two documents for your problem:

  Mark a partition as active

  Format a hard drive or partition to NTFS format

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.